Search NASA⌕ Search

SEARCH · Search NASA

Results for “Triaxiality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

NASA ACC High Energy Dynamic Impact Methodology and Outcomes

For High Energy Dynamic Impact (HEDI) events, testing to evaluate the structural response of primary aircraft structure for design and certification is both expensive and time consuming. This paper discusses current work seeking to assess, develop, and validate appropriate analytical models that accurately predict physical response, damage, and failure modes for large scale composite structures in HEDI events. Four state-of-the-art Progressive Damage Analysis (PDA) methods were employed for this phased project: LS-DYNA MAT162, LS-DYNA MAT261, Smoothed Particle Galerkin (SPG), and EMU Peridynamics. Multiple material systems were considered, namely T700/5208 textile-infusion triaxial braid, T800/AMD-825 textile-infusion triaxial braid, IM7/8552 uni-directional tape, and SPG 196-PW/8552 plain-weave fabric. Extensive ballistic impact testing was performed to support this activity and measured results were compared to predictive models for assessment using panel delamination, panel displacement, force at the load cells, and threshold velocity as measures. Ultimately, the work under this activity provided significant progress in advancing the state-of-the-art in the use of PDA for HEDI events. Each material model had favorable performance comparing to test in some parameters and needed improvement in others. With the lessons learned from this activity, significant progress was made in the ability to predict panel behavior for a more general case beyond the flat panel in a ballistic impact event. Subsequent Phase II of the NASA ACC HEDI effort will continue to build on the coupon testing, flat panel ballistic impact testing, and analysis performed to-date with application of the PDA methods for intended material selections to test articles with greater complexity of configuration, curvature, and scale. It is not the intention of this paper to present a full set of data, but rather to give an overview of the NASA HEDI effort and show a small representative subset of the test and analysis results.

Hunziker, Kenneth J.↗
NASA NTRS1967

OGO-E-16 search coil magnetometer

Design of coil magnetometer for measuring geomagnetic and interplanetary field fluctuations by triaxial spectrum analysis

Nahabit, R. J.↗
NASA NTRS1971

Density accuracy from the accelerometer inflatable falling sphere.

Computed error bars are added to the upper-air density measurements of January 31, 1969, at Wallops Island, Virginia, reported by Faucher and Morrissey. A triaxial accelerometer-instrumented inflated falling sphere was used for the measurements. Bases for the computation are presented. The conclusions of Faucher and Morrissey are substantiated to about 100 km if comparable uncertainty in each of the five soundings reported is assumed.

Staffanson, F. L.↗
NASA NTRS1972

Ogo 5 magnetic-field data near the earth's bow shock - A correlation with theory.

Magnetic-field data obtained in the earth's bow-shock region with a high-resolution triaxial fluxgate magnetometer aboard the Ogo 5 satellite have been correlated with a theory of Tidman and Northrop (1968). These authors have shown that either of two hypotheses about the nature of low-frequency magnetic waves could be invoked to explain previous observations. We have observed exponentially decaying upstream waves that are consistent with only one of these hypotheses. This observation allows use of the theory to infer the local shock velocity and frequency of driving currents within the shock. This method of finding the shock velocity is less sensitive to errors in the plasma parameters than is the method based on the Rankine-Hugoniot relations.

Guha, J. K.↗
NASA NTRS1972

Wind tunnel simulation of full scale vortices.

An experimental investigation has been conducted to determine the important scaling parameters for the flow in the core region of a vortex generated by a rectangular wing tip. The effect of an unconventional planform, the ogee tip, on the tip vortex is also determined. Data were measured for wing pitch angles of 6 and 9 deg at Mach numbers of 0.2, 0.5, and 0.6 for Reynolds numbers ranging from 440,000 to 7,000,000 using a triaxial hot wire probe. The probe was located at 2 and 5 chordlengths downstream from the trailing edge of the 4.25 inch and 26.0 inch chord wings. For rectangular planform wings, the measured vortex core diameter to chord ratios, peak tangential velocity ratios, and axial velocity ratios are shown to be functions only of wing lift coefficient and elapsed time from vortex formation, and appear to be independent of both Mach number and Reynolds number.

Rorke, J. B.↗
NASA NTRS1973

Investigation of boundary layer and turbulence characteristics inside the passages of an axial flow inducer

A study of the boundary layer and turbulence characteristics inside the passages of an axial flow inducer is reported. The first part deals with the analytical and experimental investigation of the boundary layer characteristics in a four bladed flat plate inducer passage operated with no throttle. An approximate analysis for the prediction of radial and chordwise velocity profiles across the passage is carried out. The momentum integral technique is used to predict the gross properties of the boundary layer. Equations are given for the exact analysis of the turbulent boundary layer characteristics using the turbulent field method. Detailed measurement of boundary layer profiles, limiting streamline angle and skin friction stress on the rotating blade is also reported. Part two of this report deals with the prediction of the flow as well as blade static pressure measurements in a three bladed inducer with cambered blades operated at a flow coefficient of 0.065. In addition, the mean velocity and turbulence measurements carried out inside the passage using a rotating triaxial probe is reported.

Anand, A.↗
NASA NTRS1973

Estimates of the moon's geometry using lunar orbiter imagery and Apollo laser altimeter data

Selenographic coordinates for about 6000 lunar points identified on the Lunar Orbiter photographs are tabulated and have been combined with those lunar radii derived from the Apollo 15 laser altimeter data. These coordinates were used to derive that triaxial ellipsoid which best fits the moon's irregular surface. Fits were obtaind for different constraints on both the axial orientations and the displacement of the center of the ellipsoid. The semiaxes for the unconstrained ellipsoid were a = 1737.6 km, b = 1735.6 km, and c = 1735.0 km which correspond to a mean radius of about 1736.1 km. These axes were found to be nearly parallel to the moon's principal axes of inertia, and the origin was displaced about 2.0 km from the moon's center of gravity in a direction away from the earth and to the south of the lunar equator.

Jones, R. L.↗
NASA NTRS1973

Surface properties working group

The objectives of the Mars surface properties working group are described. The objectives were: (1) determine a simple reference surface that would adequately represent the shape of the planet for cartographic purposes; (2) monitor the topographic results and to assess the relative calibration and accuracies of these techniques, thereby leading to a composite topographic map of the planet; and (3) facilitate the exchange of data in closely connected disciplines. The shape, topography, and isobaric surface are discussed along with the gravity field, and crustal density model. It was found that there is no simple reference figure for the planetary surface, although an offset, triaxial ellipsoid is adequate for most purposes.

Whitehead, A. B.↗
NASA NTRS1972

On a yield surface for granular materials.

A special plasticity theory for soils in a triaxial compression drained condition which was extracted from a general theory of soil plasticity presented by Aguirre-Ramirez is generalized for three-dimensional complex stress fields. A theory for plane-strain is then constructed from the generalized three-dimensional theory. Both theories are then compared and found to be in agreement with the corresponding theories presented by Roscoe and Burland at Cambridge.

Aguirre-Ramirez, G.↗