Search NASA⌕ Search

SEARCH · Search NASA

Results for “Variable spring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Design and Analysis of Shape Memory Spring Tires for Martian and Lunar Rover Vehicles

Shape memory alloys (SMAs) have played an important role in various innovative engineering and medical applications, such as aerospace actuators, vibration damping devices, and coronary stents. In applications, shape memory alloys are commonly utilized in two fundamentally different ways: (i) making use of the superelasticity/ pseudoelasticity (SE/PE) phenomena, as in applications in biomedical engineering, and (ii) taking advantages of the shape memory effect (SME), as is used for actuators. Their ability to act in such vastly different capacities is mainly due to their unique capability to recover large amounts of deformation produced by either applied stresses or temperature changes. One recent emerging application in use of SMAs has been in the area of non-pneumatic tire designs for Martian or Lunar roving vehicles. These vehicles require tires that are capable of traversing rugged terrain while withstanding extreme temperatures and atmospheric conditions. Inspired by the flexible wire mesh tires used on three Lunar Roving Vehicle (LRV) missions to the Moon on Apollo 15, 16, and 17, a new compliant tire technology was developed by the NASA Glenn Research Center (GRC) and Goodyear Tire & Rubber, known as the Spring Tire. The Spring Tire consists of several hundred coiled springs woven into a flexible mesh and formed into the shape of a tire. Like the LRV wire mesh tires, the original Spring Tires were made from spring steel and were prone to permanent deformation when undergoing high localized loads. Later, a new iteration of this technology was invented, known as the ‘Superelastic Tire’. This new technology incorporated the use of superelastic SMA springs, which could effectively undergo approximately 30 times more reversible deformation than the steel spring. It also provided even greater durability and allowed for more flexibility in design, such as the use of other structural forms to reduce mass or increase load carrying capacity. Because of the unique nature of both the SMA material and the complex interactions between the springs, designing Spring Tires for a specific application requires extensive effort. Historically, design decisions have relied on full-scale empirical testing; however, this is very expensive and time consuming, especially when multiple iterations are needed. Therefore, developing a large-scale, robust, and predictive numerical model entailing complex spring interactions and the shape memory material behavior within a tire construct is the first essential step towards a successful design program. The current work focuses on implementation of the user-defined Shape Memory Alloy (SMA) model, otherwise known as SMA-GVIPs, in the Finite Element analysis (FEA) program ABAQUS for large-scale simulations of the GRC-developed Spring Tires made of SMA. The novelty of this work lies in the thorough, detail-oriented, and computationally efficient finite element analysis of full-scale SMA tires. A well-thought material characterization plan followed by model validation and a systemic sensitivity study on SMA tires has never been reported in the previous literature. The main objective of this study is to help the team improve and optimize the structural design of the SMA tires through in-depth numerical analysis and sensitivity studies. Various design variables (wire diameter, coil diameter, pitch, bead angle, and number of springs) were varied to study their influence on the global load-displacement response of the tire construct. A detailed investigation of the three-dimensional stress states was also carried out to enhance our understanding of the local changes as the tire goes through global deformation. It was concluded that a robust numerical model with a good predictive capability, together with a thoughtfully crafted sensitivity study can result in improved design iterations required to reach a desired tire performance while, significantly reducing manufacturing, labor and testing expenses. A summary of the Finite Element (FE) model construction will be presented together with a description of the user-defined SMA model, characterization process, experimental results, model validation, and numerical sensitivity study results.

shape memory alloys↗
NASA NTRS2017

Atmospheric Form Drag Coefficients Over Arctic Sea Ice Using Remotely Sensed Ice Topography Data, Spring 2009-2015

Sea ice topography significantly impacts turbulent energy/momentum exchange, e.g., atmospheric (wind) drag, over Arctic sea ice. Unfortunately, observational estimates of this contribution to atmospheric drag variability are spatially and temporally limited. Here we present new estimates of the neutral atmospheric form drag coefficient over Arctic sea ice in early spring, using high-resolution Airborne Topographic Mapper elevation data from NASA's Operation IceBridge mission. We utilize a new three-dimensional ice topography data set and combine this with an existing parameterization scheme linking surface feature height and spacing to form drag. To be consistent with previous studies investigating form drag, we compare these results with those produced using a new linear profiling topography data set. The form drag coefficient from surface feature variability shows lower values [less than 0.5-1 × 10(exp. −3)] in the Beaufort/Chukchi Seas, compared with higher values [greater than 0.5-1 ×10(exp. −3)] in the more deformed ice regimes of the Central Arctic (north of Greenland and the Canadian Archipelago), which increase with coastline proximity. The results show moderate interannual variability, including a strong increase in the form drag coefficient from 2013 to 2014/2015 north of the Canadian Archipelago. The form drag coefficient estimates are extrapolated across the Arctic with Advanced Scatterometer satellite radar backscatter data, further highlighting the regional/interannual drag coefficient variability. Finally, we combine the results with existing parameterizations of form drag from floe edges (a function of ice concentration) and skin drag to produce, to our knowledge, the first pan-Arctic estimates of the total neutral atmospheric drag coefficient (in early spring) from 2009 to 2015.

sea ice↗
DOE OSTI2024

Assessing the complex influences of water management on hydrological drought characteristics in Texas

The state of Texas in the United States is highly susceptible to drought. Its major rivers are subject to extensive water management (WM) activities in order to sustain multisectoral water demands, particularly during drought conditions. However, the impact of WM on the propagation dynamics and characteristics of hydrological drought (HD) in Texas remains unclear. To fill this gap, this study quantifies the influence of WM across 32 streamflow gauges along the mainstems of seven major rivers in Texas by comparing a variety of drought metrics under natural and managed conditions. Notably, we leveraged an extensive, naturalized streamflow dataset constructed by the Texas Commission on Environmental Quality, paired with gauge observations of managed conditions. Results indicate that at the multi-decadal scale, WM significantly reduced HD frequency across all seven rivers and at 81% of the gauges analyzed. Additionally, it increased the response timescale of HD across Texas’ major rivers by a median of 2.5 months. Conversely, the average-event duration and severity increased in most locations. Temporal analysis reveals that the WM impact on HD varied seasonally, with attenuation effects during mid-summer and early fall and intensification effects during late winter and spring. Additionally, WM was found to greatly increase the spatial variability of HD characteristics across the region. These findings emphasize the complexity of WM effects on HD and the necessity for nuanced strategies in managing HD under WM influences.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Investigating the Performance of a New Type of Preloaded Linear Stroke Length Magnetic Spring

This paper presents the analytic analysis, and proof-of-principle prototyping of a new type of magnetic spring with preload and a linear stroke length. An analytic based magnetic charge modeling approach is utilized to investigate the magnetic spring's energy density, stiffness characteristics and linearity. Here, it is shown that whilst the proposed magnetic spring has a lower mass and energy density than a mechanical spring, the magnetic spring offers several unique characteristics, such as contact-free operation, inherent preload as well as over-force failure protection. In addition, the operating principle of the presented magnetic spring can be extended to realize both positive and negative variable stiffness adjustment characteristics.

16 TIDAL AND WAVE POWER↗
NASA NTRS1990

Measurements of CH4, N2O, CO, H2O, and O3 in the middle atmosphere by the Atmospheric Trace Molecule Spectroscopy Experiment on Spacelab 3

The volume mixing ratios of five minor gases (CH4, N2O, CO, H2O, and O3) have been retrieved through the middle atmosphere from the analysis of 0.01/cm resolution infrared solar occultation spectra recorded near 28 deg N and 48 deg S latitudes with the Atmospheric Trace Molecule Spectroscopy instrument, flow on board Spacelab 3 (April 30 through May 6, 1985). The results are in general agreement with reported measurements from ground-, balloon-, and satellite-based instruments for the same seasons. In detail, the vertical profiles of these gases show the effects of the upper and middle atmospheric transport patterns dominant during the season of these observations. The profiles inferred at different longitudes around 28 deg N suggest a near-uniform zonal distribution of these gases, for conditions corresponding to late spring. The sunrise occultation measurements point to a larger longitudinal variability in the vertical distribution of these gases at 48 deg S.

Gunson, M. R.↗
NASA NTRS1998

Ocean Thermal and Color Evolution During the 1997/1998 ENSO Event

A reduced gravity primitive equation modeling and assimilation system is used to study the evolution of the tropical Pacific during the 1997/1998 ENSO cycle. The modeling/assimilation scheme ingests satellite altimeter data and TAO temperature profiles and uses SSM/I satellite derived winds as surface boundary forcing. The four-dimensional structure of the upper ocean circulation structure will be compared against available in situ observations across the Pacific basin. In particular, variability near the Galapagos Islands will be highlighted during the spring of 1998 when phytoplankton concentrations were observed to increase a hundred-fold over a two week period.

Rienecker, Michele↗
NASA NTRS2017

Potential Basin-Scale Estimates of Arctic Snow Depth with Sea Ice Freeboards from CryoSat-2 and ICESat-2: An Exploratory Analysis

The potential of deriving snow depth estimates using differences in freeboard heights from CryoSat-2 (CS-2) and ICESat-2 (IS-2) is examined. In our analysis, we use lidar freeboard from the Airborne Topographic Mapper (ATM) on Operation IceBridge (OIB) as proxy of IS-2 total (snow plus ice) freeboard. Snow depths are estimates from the OIB snow radar. Differences in height between the total (ATM) and ice (CS-2) freeboards are related to snow depth by the refractive index of the snow layer, which is dependent on snow density. For two years (2014 and 2015), regression of the ATM and CS-2 freeboard differences against OIB snow depth gives correlations of approximately 0.80, estimated eta (sub s) of 1.21, and standard errors of 8 centimeters. The resulting refractive index, eta (sub s), can be compared to that expected of the Arctic snow cover in early spring (1.25 plus or minus 0.05). The expected biases and variability in the regression analysis are discussed. Results suggest that snow depth can be estimated from the freeboard differences. The benefits of adjusting the orbit of CS-2 for providing more optimized overlaps between IS-2 and CS-2 are considered.

Sea ice↗
DOE OSTI2022

Spatiotemporal evolution of melt ponds on Arctic sea ice

Melt ponds on sea ice play an important role in the Arctic climate system. Their presence alters the partitioning of solar radiation: decreasing reflection, increasing absorption and transmission to the ice and ocean, and enhancing melt. The spatiotemporal properties of melt ponds thus modify ice albedo feedbacks and the mass balance of Arctic sea ice. The Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition presented a valuable opportunity to investigate the seasonal evolution of melt ponds through a rich array of atmosphere-ice-ocean measurements across spatial and temporal scales. In this study, we characterize the seasonal behavior and variability in the snow, surface scattering layer, and melt ponds from spring melt to autumn freeze-up using in situ surveys and auxiliary observations. We compare the results to satellite retrievals and output from two models: the Community Earth System Model (CESM2) and the Marginal Ice Zone Modeling and Assimilation System (MIZMAS). During the melt season, the maximum pond coverage and depth were 21% and 22 ± 13 cm, respectively, with distribution and depth corresponding to surface roughness and ice thickness. Compared to observations, both models overestimate melt pond coverage in summer, with maximum values of approximately 41% (MIZMAS) and 51% (CESM2). This overestimation has important implications for accurately simulating albedo feedbacks. During the observed freeze-up, weather events, including rain on snow, caused high-frequency variability in snow depth, while pond coverage and depth remained relatively constant until continuous freezing ensued. Both models accurately simulate the abrupt cessation of melt ponds during freeze-up, but the dates of freeze-up differ. MIZMAS accurately simulates the observed date of freeze-up, while CESM2 simulates freeze-up one-to-two weeks earlier. This work demonstrates areas that warrant future observation-model synthesis for improving the representation of sea-ice processes and properties, which can aid accurate simulations of albedo feedbacks in a warming climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The Rate of Canopy Development Modulates the Link Between the Timing of Spring Leaf Emergence and Summer Moisture

Shifts in phenological timing have important implications for ecosystem processes, with spring leaf emergence as a dominant control of carbon, water, and energy cycling. Phenological events are predominantly determined by weather and climate, therefore dynamic in time and sensitive to climate feedbacks. Improving our understanding of how ecosystems respond to changes in phenological timing will enhance our ability to assess summer soil water availability, since the timing of spring leaf emergence may lead to soil moisture deficits later in the growing season. We leveraged data from five AmeriFlux towers in central and eastern United States to investigate the extent spring leaf emergence (i.e., start of spring, SoS ) influences rates at which forest canopies develop and how this impacts summer soil moisture ( θ JJA ) variability. Our results indicate that ecosystem processes, specifically gross primary production ( GPP ) and evapotranspiration ( ET ), exhibit compensatory responses to varying leaf emergence; with delayed spring-onset, the canopy developed more quickly, resulting in rapid GPP and ET increases, consistent across sites. Nonetheless, early SoS is a relatively good indicator for potential summer soil water deficits, particularly when it occurs together with meteorological conditions (i.e., lower-than-average precipitation, hot summer temperatures) that contribute to soil water deficits. When these meteorological conditions coincide with early SoS , θ JJA deficits are exacerbated. To the extent that these extreme conditions occur more frequently under future climate scenarios, the dynamics of spring phenology and hydroclimate may play an increasingly important role in portending the likelihood of summer water deficits, which are projected to become more severe.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2005

GALEX Study of the UV Variability of Nearby Galaxies and a Deep Probe of the UV Luminosity Function

The proposal has two aims - a deep exposure of NGC 300, about a factor of 10 deeper than the GALEX all-sky survey; and an examination of the UV variability. The data were received just prior to a series of proposal deadlines in early spring. A subsequent analysis delay includes a move from SAO to the University of Texas - San Antonio. Nevertheless, we have merged the data into a single deep exposure as well as undertaking a preliminary examination of the variability. No UV halo is present as detected in the GALEX observation of M83. No UV bursts are visible; however a more stringent limit will only be obtained through a differencing of the sub-images. Papers: we expect 2 papers at about 12 pages/paper to flow from this project. The first paper will report on the time variability while the second will focus on the deep UV image obtained from stacking the individual observations.

Schlegel, Eric↗
DOE OSTI2020

Modulation of springtime surface sensible heating over the Tibetan Plateau on the interannual variability of East Asian dust cycle

Previous observational evidence and numerical simulations have revealed that the surface sensible heating in spring (March–April–May, MAM) over the Tibetan Plateau (TPSH) can affect the Asian regional hydrological cycle, surface energy balance, and climate through altering atmospheric heat source of the Tibetan Plateau (TP). This study aims to investigate the impacts of MAM TPSH on the interannual variability of East Asian dust cycle by using CAM4-BAM (version 4 of the Community Atmosphere Model coupled to a bulk aerosol model), MERRA-2 (version 2 of the Modern-Era Retrospective analysis for Research and Applications) surface dust concentration, and TPSH measurements. Our simulations show that the surface dust concentrations over the East Asian (EA) dust source region and over the northwestern Pacific (NP) in MAM are significantly positively correlated with TPSH, with regionally averaged correlation coefficients of 0.49 for EA and 0.44 for NP. Similar positive correlations are also shown between the MAM TPSH measurements averaged over the 73 observation sites and the surface dust concentration from MERRA-2. Simulation-based comparisons between strongest and weakest TPSH years reveal that, the MAM surface dust concentration in the strongest TPSH years increases with relative differences of 13.1 % over EA and 36.9 % over NP. These corresponding differences are found in MERRA-2 with 22.9 % and 13.3 % over EA and NP, respectively. Further simulated results show that the processes of whole dust cycles (e.g., dust loading, emission, and transport, as well as dust deposition) are also significantly enhanced during the strongest TPSH years over EA and NP. Through enhancing the TP heat source, stronger TPSH in MAM generates an anticyclonic anomaly in middle and upper troposphere over the TP and over the downstream Pacific region, respectively. These atmospheric circulation anomalies induced by the increased TPSH result in increasing the westerly winds over both EA and NP, which in turn increases dust emissions over the dust source, and dust transport over these two regions, as well as the regional dust cycles. These results suggest that addressing the East Asian dust changes in the future climates requires considering not only increasing greenhouse gas emissions but also the variations of the TP's heat source under global warming.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2002

Upper Tropospheric Ozone Between Latitudes 60S and 60N Derived from Nimbus 7 TOMS/THIR Cloud Slicing

This study evaluates the spatial distributions and seasonal cycles in upper tropospheric ozone (pressure range 200-500 hPa) from low to high latitudes (60S to 60N) derived from the satellite retrieval method called "Cloud Slicing." Cloud Slicing is a unique technique for determining ozone profile information in the troposphere by combining co-located measurements of cloud-top, pressure and above-cloud column ozone. For upper tropospheric ozone, co-located measurements of Nimbus 7 Total Ozone Mapping Spectrometer (TOMS) above-cloud column ozone, and Nimbus 7 Temperature Humidity Infrared Radiometer (THIR) cloud-top pressure during 1979-1984 were incorporated. In the tropics, upper tropospheric ozone shows year-round enhancement in the Atlantic region and evidence of a possible semiannual variability. Upper tropospheric ozone outside the tropics shows greatest abundance in winter and spring seasons in both hemispheres with largest seasonal and largest amounts in the NH. These characteristics are similar to lower stratospheric ozone. Comparisons of upper tropospheric column ozone with both stratospheric ozone and a proxy of lower stratospheric air mass (i.e., tropopause pressure) from National Centers for Environmental Prediction (NCEP) suggest that stratosphere-troposphere exchange (STE) may be a significant source for the seasonal variability of upper tropospheric ozone almost everywhere between 60S and 60N except in low latitudes around 10S to 25N where other sources (e.g., tropospheric transport, biomass burning, aerosol effects, lightning, etc.) may have a greater role.

Ziemke, Jerald R.↗
DOE OSTI2020

Seasonal to Decadal Variability in Focused Groundwater and Contaminant Discharge along a Channelized Stream

Abstract Focused groundwater discharge to streams is problematic at contaminated sites because high fluxes can limit natural attenuation in the hyporheic zone. However, information on location, spatial evolution, and temporal persistence of springs in unlithified sediments over multiyear time scales is limited. We examine discharge at point (~1‐m) to reach (~300‐m) scales along a stream that intercepts trichloroethene and technetium‐99 plumes from a Superfund site. During 2011 to 2012, we seasonally monitored stream and spring flow and contaminant concentrations, along with probing streambed temperatures on a grid in winter and summer, building on prior monitoring during 1999 to 2002. Baseflow measured by both gauging and dye dilution generally increased with distance downstream, and stream and spring discharge varied seasonally, from minima in October to January to maxima in February to June. Thermal anomalies identified by probing occupied approximately 3% to 6% of the reach and typically coincided with visible springs or seeps. Locations of anomalies were similar to those identified in summer 2002, although some orifices disappeared and others emerged. Vertical groundwater fluxes calculated from probing tended to be less than net fluxes calculated from stream discharge, perhaps in part because the assumption of one‐dimensional, steady‐state flow in calculating point fluxes was simplistic. Maximum contaminant concentrations and fluxes decreased between 1999 to 2001 and 2011 to 2012 as a result of partial capture by an upgradient pump‐and‐treat system. Our findings confirm that springs in unlithified sediments can remain stationary within a few meters over decadal time scales, and seasonal variability in discharge can be greater than decadal variability.

Tripathi, Ganesh N.↗
DOE OSTI2022

Assessing the large-scale drivers of precipitation in the northeastern United States via linear orthogonal decomposition

This study examines the linear orthogonal modes associated with monthly precipitation in the northeastern United States, from CESM1 LENS (35 ensemble members, 1979–2005) and two reanalysis datasets (ERA5, 1950–2018 and NOAA-CIRES-DOE 20CRv3, 1950–2015). Calendar months are aggregated together, and any linear trends in data are removed. Using region-averaged precipitation anomaly time series and monthly anomalies for several global 2D atmospheric fields, a linear orthogonal decomposition method is implemented to iteratively extract time series (based on field and geographic location) of absolute maximum correlation. Linear modes associated with this method are then projected onto the full set of 2D fields to provide physical insight into the mechanisms involved in generating precipitation. In this region, the first mode is associated with vapor transport from the Atlantic seaboard, the second mode is characterized by westward vapor transport associated with extratropical cyclones, and the third mode captures vapor transport from the Gulf of Mexico during the fall and winter. However, the third mode is less robust in the spring and summer. Results are generally consistent across the datasets, and applying multiple linear regression with the linear modes to predict the precipitation anomalies produces R-squared values of around 0.54–0.65 for CESM1 LENS, and around 0.58–0.88 for reanalysis, with the lowest values generally in the spring and late summer. The influence of low-frequency climate variability on the modes is considered for CESM1 LENS, and the modes in late winter can be predicted with some success via a combination of several, prominent large-scale teleconnection patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

High-dimensional control co-design of a wave energy converter with a novel pitch resonator power takeoff system

Researchers are exploring adding wave energy converters to existing oceanographic buoys to provide a predictable source of renewable power. A ”pitch resonator” power take-off system has been developed that generates power using a geared flywheel system designed to match resonance with the pitching motion of the buoy. However, the novelty of the concept leaves researchers uncertain about various design aspects of the system. This work presents a novel design study of a pitch resonator to inform design decisions for an upcoming deployment of the system. The assessment uses control co-design via WecOptTool to optimize control trajectories for maximal electrical power production while varying five design parameters of the pitch resonator. Given the large search space of the problem, the control trajectories are optimized within a Monte Carlo analysis to identify optimal designs, followed by parameter sweeps around the optimum to identify trends between the design parameters. The gear ratio between the pitch resonator spring and flywheel are found to be the most sensitive design variables to power performance. Finally, the assessment also finds similar power generation for various sizes of resonator components, suggesting that correctly designing for optimal control trajectories at resonance is more critical to the design than component sizing.

16 TIDAL AND WAVE POWER↗
NASA NTRS1987

Improved VAS regression soundings of mesoscale temperature structure observed during the 1982 atmospheric variability experiment

An Atmospheric Variability Experiment (AVE) was conducted over the central U.S. in the spring of 1982, collecting radiosonde date to verify mesoscale soundings from the VISSR Atmospheric Sounder (VAS) on the GOES satellite. Previously published VAS/AVE comparisons for the 6 March 1982 case found that the satellite retrievals scarcely detected a low level temperature inversion or a mid-tropospheric cold pool over a special mesoscale radiosonde verification network in north central Texas. The previously published regression and physical retrieval algorithms did not fully utilize VAS' sensitivity to important subsynoptic thermal features. Therefore, the 6 March 1982 case was reprocessed adding two enhancements to the VAS regression retrieval algorithm: (1) the regression matrix was determined using AVE profile data obtained in the region at asynoptic times, and (2) more optimistic signal-to-noise statistical conditioning factors were applied to the VAS temperature sounding channels. The new VAS soundings resolve more of the low level temperature inversion and mid-level cold pool. Most of the improvements stems from the utilization of asynoptic radiosonde observations at NWS sites. This case suggests that VAS regression soundings may require a ground-based asynoptic profiler network to bridge the gap between the synoptic radiosonde network and the high resolution geosynchronous satellite observations during the day.

Chesters, Dennis↗
DOE OSTI2025

Nitrogen fixation in Pampinifervens , a new species-rich genus of Aquificaceae that inhabits a wide pH range in terrestrial hot springs

Members of the Aquificota play important roles in hydrogen, sulfur, and carbon cycles in geothermal systems as ubiquitous and abundant chemolithoautotrophs; however, their roles in the nitrogen cycle are poorly defined. Here, we show that Aquificaceae isolate T-2 T from Tengchong, China, fixes nitrogen based on growth with dinitrogen as the sole nitrogen source and incorporation of 15 N atoms when grown with 15 N 2 . We further show evidence that suggests its nitrogen fixation (nif) genes are transcribed in situ in a nearby spring. We propose the name Pampinifervens diazotrophicum gen. et sp. nov., with strain T-2 T (= JCM 35475 T = DSM 116324 T ) as the nomenclatural type. Its close relative designated Pampinifervens florentissimum sp. nov. T-8 T (= CGMC 1.5214 T = JCM 33569 T ) does not fix nitrogen but respires nitrate. Analysis of 104 metagenome-assembled genomes from 84 metagenomes allowed us to circumscribe the genus Pampinifervens and identify at least 16 sympatric Pampinifervens species that dominate the Aquificaceae populations in diverse hot springs in southwest China, with distinct species globally. Analysis of these Pampinifervens genomes revealed variable presence of nif and denitrification genes and frequent gene loss and horizontal transfer. Genes for pH homeostasis were also present in Pampinifervens genomes, with a proliferation in species from Tengchong, consistent with the wide pH growth range of both Pampinifervens isolates and the prevalence of Pampinifervens in both alkaline and acidic springs. The dynamic evolution of nif and denitrification genes, along with pH homeostasis genes, may facilitate the diversification of Pampinifervens into diverse springs with different nitrogen availability.

Aquificae↗
DOE OSTI2024

Subdecadal Holocene Warm-Season Temperature Variability in Central Europe Recorded by Biochemical Varves

Paleoclimate data provide important information about the character of natural climate variability. However, records with sufficient length and resolution to resolve high-frequency (decadal-scale) variability across the Holocene are scarce. We present a 10,800-year reconstruction of spring and summer temperature at three-year resolution based on biochemical varves from Lake $\dot{Z}abi$$\acute{n}skie$, Poland. The reconstruction is based on Ca/Ti ratio, which are significantly correlated with instrumental spring and summer temperature spanning 240 years. Major climate events of the Holocene period are represented in the reconstruction, including the Holocene Thermal Maximum, 8.2 ka Event, Medieval Climate Anomaly, and Little Ice Age. A low-frequency 8,000-year decreasing trend in warm-season temperatures is driven by declining summer insolation. Temperature variability is highest during the early Holocene, likely related to warmer and drier conditions. The rate of warming during the past 90 years is extremely unusual, if not unprecedented for the Holocene, based on our reconstruction.

58 GEOSCIENCES↗