Search NASA⌕ Search

SEARCH · Search NASA

Results for “WETTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Deep photoenhanced wet material etching using high-power ultraviolet light emitting diodes

Methods and systems for etching a substrate using photoenhanced wet etching techniques are described. At least one light emitting diode source is used to create a high intensity of ultraviolet light at the surface of the substrate or at one or more layers formed on the substrate. Etching rates in GaN substrates and GaN layers are improved by an order of magnitude over conventional systems. Systems and methods for forming a device structure free of a substrate are described. The device structure is grown or applied over a release layer on a substrate. The device structure is exposed to photoenhanced wet etch environments to vertically and laterally etch the release layer to separate the device structure from the substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fuel properties effects on wall-wetting and fuel-in-lube dilution under stochastic pre ignition prone conditions

Fuel-engine interactions have been shown to influence stochastic pre-ignition (SPI), however there is uncertainty on the root causes, participially if effects are primarily physical or chemical in nature. To better delineate the physical and chemical dependencies of fuel properties on SPI, this work studies interactions between aromatics, distillation, and particle matter index on SPI with a laser induced fluorescence (LIF) diagnostic to observe wall wetting. Fuels with high aromatic components or higher distillation temperatures tend to increase SPI events, but it is not well understood if the increased fuel dilution or a chemical aspect of this process is the primary mechanism for SPI. By employing the novel LIF in this work we measure fuel dilution in real-time in a running single cylinder research engine operated at SPI conditions. Three fuels were used in the present work, with the LIF diagnostic. Each fuel was operated at two injection timings, generating fuel specific effects on wall wetting. The LIF measurements are coupled with engine combustion measurements and SPI event counts. Results enable a deconvolution of fuel physical and chemical properties on SPI propensity, providing unique and novel insights into the dominant fuel effects affecting SPI.

Splitter, Derek↗
DOE OSTI2020

Gold Catalysts Synthesized Using a Modified Incipient Wetness Impregnation Method for Propylene Epoxidation

Propylene epoxidation in the presence of oxygen and hydrogen were measured for a series of Au/TS-1 catalysts prepared by a modified incipient wetness impregnation (mIWI) method. This method enables precise control of the Au : Ti ratio in the Au/TS-1 catalysts. The optimized Au/TS-1 catalyst exhibited 12 % propylene conversion, 87 % PO selectivity, and 25 % hydrogen efficiency. The particle size of gold nanoparticles prepared by the modified IWI was between 2 and 3 nm, as demonstrated by XRD patterns, STEM images, and X-ray absorption spectroscopy at the Au L(3)edge. XPS spectra showed that the surface species on the catalysts were similar. UV-Vis spectra suggested that in the modified IWI method, the chlorine ligands in Au(Cl)(4)(-)were replaced by hydroxyl groups, which contributes to form small gold nanoparticles. Kinetic studies showed that the active sites of Au(mIWI)/TS-1 are similar to the Au(DP)/TS-1 prepared by deposition precipitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

First-principles study of grain-boundary wetting in Fe-Σ5(013)[100] tilt boundary

Here, we report an ab-initio study of grain-boundary wetting (GBW) in three systems (Fe/Zn, Fe/Pb & Fe/Bi) on a Σ5(013)[100] tilt grain boundary. An energy-based approach is pursued and adapted to the study of liquid-metal/solid-metal interfaces. We provide a sound calculation of the wettability parameter S (i.e., defined as the minimum energy difference between the unbroken initial state and final state with liquid-metal/solid-metal interfaces). Solid/liquid interfaces are modelled by ab-initio molecular dynamics, also allowing a study of structural effects in the liquid phase near the solid interface. We show how surface energies for solid-metal/liquid-metal interfaces need a special treatment for the liquid-metal chemical potential due to the change in crystallinity near the interface. The computation of the wettability criterion for the three systems correctly predicts the GBW trend known experimentally for these systems. The computations are compared with small-scale TEM experiments on GBW of two systems (Fe/Pb and Fe/Bi) and it is shown to provide reasonable results. This approach offers new perspectives in predicting GBW trends across various systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning the fluid wetting dynamics on gold microstructures using photoactive compounds

This work demonstrates how photoactive compounds can be used to tune the surface chemistry, surface free energy, and the wetting velocity of fluids on Spiropyran functionalized surfaces with different surface microstructures. Evidence of this photowetting effect is based on data showing: (1) the cyclic changes in the static, advancing, and receding contact angles $\theta$ CA for multiple UV$\rightleftarrows$vis photoswitching cycles with both smooth and microstructured surfaces and (2) the changes in the fluid wicking velocity (via UV$\rightleftarrows$vis photoswitching) on different Spiropyran functionalized hemiwicking surfaces. X-ray photoelectron spectroscopy is used to determine the efficiency of photoswitching caused by the quality of the Spiropyran functionalization. Reversible photoisomerization of Spiropyran generates a gradient in surface free energy, resulting in a similar change in contact angle ($\theta$ CA ) in the photoswitchable surfaces. In conclusion, by incorporating these changes into the Owens-Wendt and Van Oss surface energy models, the energy of smooth Au surfaces can also be predicted for both UV and visible light irradiations, where reversible contact angle variations of $\Delta$$\theta$ CA ≈ 5–10° are achieved with both water and water-ethanol mixtures due to the conversion of SP to merocyanine, which corresponds to a total free energy change of ~13% on the photoswitchable surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Intergranular precipitation-enhanced wetting and phase transformation in an Al0.4CoCrFeNi high-entropy alloy exposed to lead-bismuth eutectic

We report after exposure to oxygen-poor (10 -13 –10 -14 wt%) liquid lead-bismuth eutectic (LBE) at 500 °C for 500 h, LBE penetrates more than one order of magnitude deeper in an FCC Al 0.4 CoCrFeNi high-entropy alloy (HEA) decorated with a network of BCC (Ni, Al)-rich intergranular (IG) precipitates than in a single-phase, FCC Al 0.3 CoCrFeNi HEA without the IG precipitate network. This deterioration of corrosion resistance is attributed to the energetic nature of the BCC/FCC interphase boundaries (IBs) and resultant IB wetting. The LBE ingress film selectively leaches nickel located at those low-indexed crystalline planes, resulting in phase transformation from FCC to BCC structure.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Independent and interactive effects of wet bulb globe temperature and air pollution exposures on suicide mortality

Background: Individual components of the ambient environment, such as temperature and air pollution, exist as part of a complex mixture and have been associated with suicide; however, their interactive effects remain poorly understood. This study examined the independent and interactive effects of wet bulb globe temperature (WBGT), nitrogen dioxide (NO 2 ), and fine particulate matter (PM 2.5 ) on suicide mortality. Methods: We identified 7,551 suicide cases in Utah, USA, from 2000 to 2016 and assigned exposure to daily maximum WBGT (sourced from the European Center for Medium-Range Weather Forecasts) and PM 2.5 and NO 2 concentrations (sourced from a national spatiotemporal ensemble model) using decedent’s residential address at the time of death. A case-crossover design with conditional logistic regression was used to estimate the independent and interactive effects of WBGT max , PM 2.5 , and NO 2 on suicide. For exposure windows, we considered single days preceding suicide (lag 0 to 6) and their averages across preceding days (lag 0–1, 0–3, and 0–6). Analyses were stratified by season. Results: We identified a significant association between WBGT max and suicide across all seasons (odds ratio [OR] = 1.05, 95% confidence interval [CI]: 1.01, 1.10; per 5 °C increase on lag 0–3 days). The associations were stronger in the warm season (March 22 to September 21), with ORs and 95% CIs ranging from 1.08 (1.02, 1.15) to 1.20 (1.10, 1.30) per 5 °C increase depending on the lag periods. We observed synergistic interactions between WBGT max and PM 2.5 and NO 2 in the warm season, associated with higher odds of suicide. The associations of WBGT max with suicide were most pronounced at high NO 2 levels. Conclusions: We found evidence of synergistic interactions between WBGT max and PM 2.5 and NO 2 on suicide in the warm season, emphasizing the need for considering the combined effects of heat stress and air pollution in suicide prevention strategies.

Fine particulate matter↗
DOE OSTI2022

Liquid lithium wetting and percolation in a porous tungsten/liquid Li plasma facing component (PFC)

This work explores the concept of a hybrid material system designed to protect the plasma from high-Z material emission while also protecting an underlying high-Z wall material from erosion by integrating a low-Z component in the liquid phase. Plasma-surface interaction properties of a porous tungsten (W)-liquid metal hybrid system, having the favorable bulk thermomechanical properties of W while serving as a scaffold for a liquid metal with self-healing and radiative vapor shielding characteristics, are examined. W-substrates with 70% density of bulk W and 1–5 μm sized pores have been fabricated with 50-nm W powders using spark plasma sintering. Enhanced lithium (Li) wettability, driven by percolation through the porous W architecture, is demonstrated with in-situ liquid Li drop measurements. Finally, results show complete wetting of liquid Li at 250 °C in the porous W, 100 °C lower temperature than what has been observed on traditional W surfaces. In operando ion beam analysis of Li films deposited on porous W substrates provides microscopic evidence of Li percolation into the substrate and a first look at D retention up to a depth of 100 nm after plasma exposure at a flux of 10 20 m –2 s –1 , 250 eV/amu D + plasma to a fluence of 1.16 × 10 23 m –2 at a temperature of 200 °C.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Long coir and glass fiber reinforced polypropylene hybrid composites prepared via wet-laid technique

Natural fiber composites offer an advantage in terms of weight saving for many automotive applications; however, many natural fiber composites lack properties to justify substitution for synthetic composites. Hybridizing the natural fiber composites by adding a fraction of synthetic fibers is an innovative approach to provide a balance between composite's performance and weight savings. In this study, coir fiber (40 wt%)-reinforced polypropylene (PP) composites were hybridized by substituting a fraction of coir fiber with glass fiber (0–30 wt%). The composites were prepared using a novel wet-laid technique followed by compression molding, where the fiber length is preserved. The composites prepared by hybridizing PP/coir fibers with glass fibers were light in weight (6–20% lighter compared to 40 wt% glass fiber reinforced PP) with significantly enhanced tensile (strength – 49–182%, modulus – 54–130%), flexural (strength – 41–104%, modulus – 64–193%), and impact properties (157 - 474%) compared to 40 wt% coir fiber reinforced PP composites. Furthermore, the addition of glass fiber (10–30 wt%) to coir fiber reduced the water-absorbing tendency (by 18–74%) of PP/coir fiber composites. All in all, this work has potential applications in automotive, mass transit, and truck applications where natural fiber composites are being investigated as alternatives to metal and/or fully synthetic composites.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Engineering surface segregation of perovskite oxide through wet exsolution for CO catalytic oxidation

Cation segregation occurring near the surface or interfaces of solid catalysts plays an important role in catalytic reactions. Unfortunately, the native surface of perovskite oxides is dominated by passivated A-site segregation, which severely hampers the catalytic activity and durability of the system. To address this issue, we present a wet exsolution method to reconstruct surface segregation in perovskite cobalt oxide. Here, under reduction etching treatment of glycol solution, inert surface Sr segregation was transformed into active Co 3 O 4 segregation. By varying the reaction time, we achieved differing coverage of the active Co 3 O 4 segregation on the La 0.5 Sr 0.5 CoO 3-δ (LSCO) perovskite oxide surface. This study reveals that CO oxidation activity exhibits a volcano-shaped dependence on the coverage of Co 3 O 4 segregation at the surface of a perovskite cobalt oxide. Furthermore, we find that a suitable coverage of Co 3 O 4 segregation can dramatically improve the catalytic activity of the perovskite catalyst by enhancing interface interactions. Co K-edge, Co L-edge, and O K-edge X-ray absorption spectra confirm that the synergistic effect optimizes the covalence of the metal-oxygen bond at the surface and interface. This work not only contributes to the design of perovskite-type catalysts, but also provides important insight into the relationship between surface segregation and catalytic activity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of Gold Catalyst Surface Morphology on Wetting Behavior and Electrochemical CO 2 Reduction Performance in a Large-Area Zero-Gap Gas Diffusion Electrolyzer

We report catalyst surface area and wetting behavior are key factors in determining the performance of gas diffusion electrode (GDE) electrolyzers for electrochemical CO 2 reduction. In this work, we report the integration of sub-1 μm thick nanoporous gold (npAu) catalyst coatings into a large-area (25 cm 2 ) zero-gap electrolyzer. The npAu coatings were prepared by magnetron sputtering (MS) of thin AgAu alloy films on the microporous carbon layer of a gas diffusion layer (GDL) followed by Ag leaching. Compared to MS Au films of the same thickness, npAu catalyst coatings enable higher Faradaic efficiencies and improved catalyst stability for CO 2 -to-CO reduction with Faradaic efficiencies of up to 88% at 100 mA/cm 2 . For a 800 nm npAu coating, the device level energy efficiency for CO 2 to CO conversion reaches 45% (52% for CO + H 2 ) at 100 mA/cm 2 with a single pass CO 2 conversion efficiency of ~12%. Contact angle measurements reveal that npAu coatings provide a more hydrophobic electrode interface compared to MS Au coatings, suggesting that the more hydrophobic interfacial environment of npAu coatings helps mitigating electrode flooding which is associated with performance deterioration over time.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2019

Extreme Wet-Bulb Temperatures in China: The Significant Role of Moisture

This paper investigates the extreme wet bulb temperatures (TWs) in China, with a focus on understanding the relative contributions of temperature and moisture to the extremes. Analysis of station observations shows that daily extreme temperatures (T), specific humidity (q) and TWs generally co-occur in southeastern China while extreme TW and T rarely overlap in the arid and semi-arid North and Northwest China. Overall, q contributes more than T to extreme TWs, especially in North and Northwest China. Based on the relative contributions of q and T, regional extreme TW events are classified as q-dominated and T-dominated, respectively, to study their large-scale environment. Cluster analysis of global reanalysis data shows that extreme TWs are generally accompanied by increased surface air temperature and humidity, concomitant with anomalous high-pressure and notable water vapor flux convergence. However, important differences are also seen in the large-scale environment during q-dominated and T-dominated extreme TWs. During q-dominated extreme TWs, the large-scale environment favors convection, as indicated by ascending motions, decreased downward solar radiation (DSR) as well as increased precipitable water and near surface relative humidity. In contrast, during T-dominated extreme TWs, convection is inhibited by the large-scale environment that features descending motion and increased DSR, decreased precipitable water as well as decreased relative humidity. Consistent with the contrasting environments, we demonstrate that T-dominated extreme TWs tend to last longer than q-dominated extremes. Given the significant role of moisture in extreme TWs, more research is needed to understand its impacts on heat stress now and in the future.

extreme wet bulb temperatures, Moisture, synoptic ↗
DOE OSTI2019

Inertial Effects During the Process of Supercritical CO 2 Displacing Brine in a Sandstone: Lattice Boltzmann Simulations Based on the Continuum-Surface-Force and Geometrical Wetting Models

Inertial effects during the process of supercritical CO 2 displacing brine in porous media may not be negligible according to recent studies. Capturing the inertial effects of the physical CO 2 -brine system imposes a requirement on the grid resolution and viscosity to surface tension ratio for pore-scale simulations, which some commonly used simulators may not be able to meet. To fulfill the parameter requirement, we combine the continuum-surface-force based color-gradient lattice Boltzmann (LB) multiphase model and the geometrical wetting model and extend the model to 3D under the multiple-relaxation-time framework. We validate the model via simple benchmarks which show significant improvement over the traditional models. Furthermore, we perform 3D drainage simulations in a heterogeneous micromodel where the simulation result agrees well with experimental data, while our previous work fails to reproduce certain displacement patterns in the experiment due to the use of a traditional LB model that cannot fulfill the parameter requirement. Finally, we perform high-fidelity 3D drainage simulations to study the inertial effects in a Bentheimer sandstone sample. These findings show that stronger inertial effects generally help develop more CO 2 flow pathways for the same capillary number which results in higher CO 2 saturation, consistent with the micromodel results. The phenomena can be found in both low and high capillary number cases, indicating that the inertial effects are not dependent on the mean velocity. In addition, the change of the invasion patterns is not proportional to the change of inertial effects, thus exhibiting threshold behavior.

58 GEOSCIENCES↗
DOE OSTI2024

Forecasting Tropical Annual Maximum Wet-Bulb Temperatures Months in Advance From the Current State of ENSO

Humid heatwaves, characterized by high temperature and humidity combinations, challenge tropical societies. Extreme wet-bulb temperatures (TW) over tropical land are coupled to the warmest sea surface temperatures by atmospheric convection and wave dynamics. Here, we harness this coupling for seasonal forecasts of the annual maximum of daily maximum TW (TW max ). We develop a multiple linear regression model that explains 80% of variance in tropical mean TW max and significant regional TW max variances. The model considers warming trends and El Niño and Southern Oscillation indices. Looking ahead, the strong-to-very-strong El Niño at the end of 2023, with an Oceanic Niño Index of ~2.0, suggests a 2024 tropical land mean TW max of 26.2°C (25.9–26.4°C), and a 68% chance (24%–94%) of breaking existing records. This method also predicts regional TW max in specific areas.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Toward net-zero sustainable aviation fuel with wet waste–derived volatile fatty acids

Significance To meet the growing demand for sustainable aviation fuels (SAF), conversion pathways are needed that leverage wet waste carbon and meet jet fuel property specifications. Here, we demonstrate SAF production from food waste–derived volatile fatty acids (VFA) by targeting normal paraffins for a near-term path to market and branched isoparaffins to increase the renewable content long term. Combining these distinct paraffin structures was shown to synergistically improve VFA-SAF flash point and viscosity to increase the renewable blend limit to 70%. Life cycle analysis shows the dramatic impact on the carbon footprint if food waste is diverted from landfills to produce VFA-SAF, highlighting the potential to meet jet fuel safety, operability, and environmental goals.

09 BIOMASS FUELS↗
DOE OSTI2020

Wet Cooling Tower Cooling System Spreadsheet Model for sCO2

The attached cost and performance spreadsheet model is for a wet cooling tower system, one of four cooling system models developed for use in optimizing indirectly-heated supercritical CO2 (sCO2) power cycles. Running the model requires that the user has REFPROP version 9 or below installed, as well as the Microsoft Excel REFPROP Add-In. Upon opening, use Excel’s Edit Links feature to link to the user’s installed REFPROP.xla or REFPROP.xlam file. For the spreadsheet model compatible with REFPROP version 10 and above, contact Nathan Weiland at nathan.weiland@netl.doe.gov. Technical documentation for the model can be found here: https://www.netl.doe.gov/energy-analysis/details?id=3199.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Wet Waste Hydrothermal Liquefaction and Biocrude Upgrading to Hydrocarbon Fuels: 2021 State of Technology

Each year the U.S. Department of Energy Bioenergy Technologies Office (BETO) assesses progress in their research and development efforts toward sustainable production of renewable fuels (DOE 2016) through the annual state of technology (SOT) assessment. The SOT assessment evaluates the impact of the year’s research progress on the modeled minimum fuel selling price (MFSP) for selected biofuel conversion pathways and measures the current state of the technology relative to defined goal case projections. Supply chain sustainability analysis to track and guide research toward improved greenhouse gas (GHG) emissions, energy usage, water usage and other environmental metrics for the pathway is performed by Argonne National Laboratory (Cai et al. 2018, 2020). Technical and cost targets for a projected goal case set for the year 2022 were previously established for the wet waste hydrothermal liquefaction (HTL) and biocrude upgrading pathway and summarized in a design report (Snowden-Swan et al. 2017). Process performance advancements made for HTL and biocrude hydrotreating have resulted yearly reductions in the modeled MFSP relative to the initial SOT (2018) (Snowden-Swan et al. 2020, 2021). This report summarizes the research and associated techno-economic analysis (TEA) for the pathway 2021 SOT. Methods and economic assumptions for the nth plant analysis used for the TEA are consistent with the design report (Snowden-Swan et al. 2017), with the exception of updates in the modeled cost year (2016) and income tax rate (21%).

09 BIOMASS FUELS↗