Search NASA⌕ Search

SEARCH · Search NASA

Results for “Water Splitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Perovskite/Perovskite Tandem Photoelectrodes for Low-Cost Unassisted Photoelectrochemical Water Splitting

In this project, we aim to address the challenges of achieving efficient and cost-effective unassisted photoelectrochemical water splitting using perovskite/perovskite tandem photoelectrodes. We utilized the following unique approaches to advance our innovation. (1) We developed stable and efficient low-E g (1.2 – 1.4 eV) perovskites as the bottom electrodes. We demonstrated approaches to improve the photovoltaic performance and photothermal stability of low-E g Sn-Pb iodide perovskite solar cells. (2) We developed a low-temperature synthesis route to fabricate wide-E g (>1.8 eV) perovskite top electrodes. By combining theoretical and experimental investigation, we found methods to reduce the formation of defects and dislocations in the wide-E g mixed halide perovskites and suppress halide segregation. (3) We developed a robust metal oxide-based interconnecting layer to integrate two perovskite layers into tandem photoelectrodes. Our monolithically integrated tandem devices feature a high V OC of more than 2 V and a high J SC of more than 15 mA/cm 2 . We showed the new design of the tandem photoelectrodes that is critical to the stable operation of tandem photoelectrodes for unassisted PV/PEC water splitting. (4) We demonstrated a water-impermeable barrier of carbon paste/epoxy/metal foil composite, which can prevent photocorrosion and water ingress of perovskite active layers. This surface protection enabled the operation of perovskite photoelectrodes in water and significantly enhanced the long-term stability of our tandem devices. (5) We conducted standardized PEC characterization in collaboration with NREL and reported accurate determination of solar-to-hydrogen conversion efficiencies of perovskite/perovskite tandem photoelectrodes. At the end of the project, we demonstrated perovskite/perovskite tandem photoelectrodes with STH efficiencies of up to 18% and less than 20% efficiency loss after continuous operation for more than 500 hours in water. Our results demonstrate the potential to develop a low-cost, durable, and efficient water-splitting system that meets the DOE 2026 and 2031 cost targets for hydrogen production.

08 HYDROGEN↗

Metal doping in cerium metal-organic frameworks for visible-response water splitting photocatalysts

Cerium metal-organic frameworks (MOFs) show great promise for photocatalytic water splitting as they have low-lying unoccupied 4f orbitals with energies lower than the unoccupied linker orbitals to drive the ligand-to-metal charge transfer (LMCT) of the photo- generated electron at the linker to separate the photo-excited charges. Nevertheless, the large and negative LMCT energies of Ce-MOFs are often accompanied by high photon-absorption energies, which then limits the application of Ce-MOFs as visible-light-driven water splitting photocatalysts. In this work, we propose that metal (Zr or Ti) doping can raise the very negative LMCT energies of Ce-MOFs, consequently leading to the decrease of the absorption energy and promoting the response of Ce-MOFs to visible light. By functionalizing the linker of the mixed-metal MOFs, we found two possible visible-response photocatalysts for water splitting using a single photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new quinoline-based cobalt( II ) catalyst capable of bifunctional water splitting

We report on a new water-soluble cobalt( II ) complex capable of water splitting bifunctionality, i.e., water reduction and water oxidation. The species [Co II (L Qpy )H 2 O]ClO 4 (1), where L Qpy is the deprotonated form of the new tripodal ligand N 1 ,N 1 -bis(pyridin-2-ylmethyl)-N 2 -(quinolin-8-yl)benzene-1,2-diamine, HL Qpy , was developed aiming to replace an oxidation prone methylene group by a sturdy and redox stable quinoline. The molecular and electronic structures of 1 were evaluated by multiple spectroscopic, spectrometric, electrochemical and computational methods, and detailed pre- and post-catalytic studies were conducted to ascertain the molecular nature of the conversions. Complex 1 performs water reduction at a low onset overpotential (η) of 0.65 V at pH 7, reaching TON 3h 2900 (TOF 970 h −1 ) and TON 18h 12 100 (TOF 672 h −1 ) with up to 98% faradaic efficiency (FE). Species 1 also promotes water oxidation at η = 0.34 V under pH 8, achieving TON 3h 193 (TOF 64 h −1 ) at 84% FE. Experimental and DFT results enabled us to propose reaction intermediates and mechanisms.

Lucecki, Carlos A. [Wayne State University, Detroi↗

Layer-structured triple-conducting electrocatalyst for water-splitting in protonic ceramic electrolysis cells: Conductivities vs. activity

Electron, proton and oxygen-triple-conducting materials are becoming the dominant steam electrode candidate to break the rate limit on the water-splitting reaction that throttles the performance of protonic ceramic electrolysis cells (PCECs). In this study, based on Pr 2 NiO 4+δ Ruddlesden-Popper phase, we manipulate these conductivities by Pr-site Ba substitution to probe the correlation of each conductivity with the kinetics of the elementary reaction steps. It is found that the proton conductivity is vital to sustain an extended active surface area for faster adsorption of reactants and desorption of products. The effect of oxygen conductivity is surprisingly found insignificant in the water-splitting reaction. On the contrary, surface oxygen removal is discovered as the most rate-limiting process. The electronic conductivity is not a direct limiting factor. However, an electron transfer process between the current collector and the electrode junction could introduce extra resistance that is perceptible at a high operating temperature range. The best water-splitting activity is obtained on a proton conductivity/oxygen surface desorption capability well-balanced sample after Ba substitution. As a result, a water-splitting reaction resistance of 0.022 Ωcm 2 , a current density of 1.96 A/cm 2 at 700 °C is achieved on Pr 1.7 Ba 0.3 NiO 4+δ , one of the best performances for PCECs.

25 ENERGY STORAGE↗

Oxide‐Supported IrNiO x Core–Shell Particles as Efficient, Cost‐Effective, and Stable Catalysts for Electrochemical Water Splitting

Abstract Active and highly stable oxide‐supported IrNiO x core–shell catalysts for electrochemical water splitting are presented. IrNi x @IrO x nanoparticles supported on high‐surface‐area mesoporous antimony‐doped tin oxide (IrNiO x /Meso‐ATO) were synthesized from bimetallic IrNi x precursor alloys (PA‐IrNi x /Meso‐ATO) using electrochemical Ni leaching and concomitant Ir oxidation. Special emphasis was placed on Ni/NiO surface segregation under thermal treatment of the PA‐IrNi x /Meso‐ATO as well as on the surface chemical state of the particle/oxide support interface. Combining a wide array of characterization methods, we uncovered the detrimental effect of segregated NiO phases on the water splitting activity of core–shell particles. The core–shell IrNiO x /Meso‐ATO catalyst displayed high water‐splitting activity and unprecedented stability in acidic electrolyte providing substantial progress in the development of PEM electrolyzer anode catalysts with drastically reduced Ir loading and significantly enhanced durability.

Nong, Hong Nhan↗

Oxide‐Supported IrNiO x Core–Shell Particles as Efficient, Cost‐Effective, and Stable Catalysts for Electrochemical Water Splitting

Abstract Active and highly stable oxide‐supported IrNiO x core–shell catalysts for electrochemical water splitting are presented. IrNi x @IrO x nanoparticles supported on high‐surface‐area mesoporous antimony‐doped tin oxide (IrNiO x /Meso‐ATO) were synthesized from bimetallic IrNi x precursor alloys (PA‐IrNi x /Meso‐ATO) using electrochemical Ni leaching and concomitant Ir oxidation. Special emphasis was placed on Ni/NiO surface segregation under thermal treatment of the PA‐IrNi x /Meso‐ATO as well as on the surface chemical state of the particle/oxide support interface. Combining a wide array of characterization methods, we uncovered the detrimental effect of segregated NiO phases on the water splitting activity of core–shell particles. The core–shell IrNiO x /Meso‐ATO catalyst displayed high water‐splitting activity and unprecedented stability in acidic electrolyte providing substantial progress in the development of PEM electrolyzer anode catalysts with drastically reduced Ir loading and significantly enhanced durability.

Nong, Hong Nhan↗

Evaluating particle-suspension reactor designs for Z-scheme solar water splitting via transport and kinetic modeling

Sunlight-driven water splitting to produce hydrogen and oxygen provides a pathway to store available solar energy in the form of stable, energy-dense chemical bonds. Here we investigate a tandem particle-suspension reactor design for solar water splitting comprising micron-scale photocatalyst particles suspended in an aqueous solution with soluble redox shuttles. A porous separator facilitates redox species transport between the hydrogen and oxygen evolution reaction compartments while averting gas crossover. A two-dimensional, transient model of the reactor is presented to illustrate the coupling between light absorption, interfacial electron-transfer kinetics and species transport, and their combined impacts on overall solar-to-hydrogen conversion efficiency. The volumetric reactivity of the suspended semiconductor particles is dictated by combining the (photo)current-voltage behavior of a photodiode with Butler-Volmer electron-transfer kinetics. For the first time, a quantitative approach to determine the impacts of surface-dependent redox shuttle kinetic parameters on reaction selectivity in a Z-scheme system is established. Model results provide insights on the effects of optical, transport and kinetic properties of the semiconductor particles and the redox shuttles on the overall reactor performance. Solar-to-hydrogen reactor efficiencies predicted with BiVO 4 particles for oxygen evolution are at least two times larger than efficiencies achieved with wider band-gap TiO 2 particles due to enhanced visible light absorption; hydrogen evolution with SrTiO 3 :Rh particles was considered for both cases. Superior performance is predicted with proton-coupled electron transfer redox shuttles (para-benzoquinone/hydroquinone and iodide/iodate) that absorb little-to-no visible light, while also facilitating operation at near-neutral pH conditions, as compared to the non-proton-coupled triiodide/iodide and iron(iii)/iron(ii) redox shuttles. For 1 cm tall reaction compartments, diffusive species transport is fast enough to sustain reactor operation at a 1% solar-to-hydrogen conversion efficiency for both para-benzoquinone/hydroquinone and iodate/iodide redox shuttles with less than 2.2 mg L -1 of each of BiVO 4 and SrTiO 3 :Rh particles in the solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bifunctional non-noble metal oxide nanoparticle electrocatalysts through lithium-induced conversion for overall water splitting

Developing earth-abundant, active and stable electrocatalysts which operate in the same electrolyte for water splitting, including oxygen evolution reaction and hydrogen evolution reaction, is important for many renewable energy conversion processes. Here we demonstrate the improvement of catalytic activity when transition metal oxide (iron, cobalt, nickel oxides and their mixed oxides) nanoparticles (B20 nm) are electrochemically transformed into ultra-small diameter (2–5 nm) nanoparticles through lithium-induced conversion reactions. Different from most traditional chemical syntheses, this method maintains excellent electrical interconnection among nanoparticles and results in large surface areas and many catalytically active sites. We demonstrate that lithium-induced ultra-small NiFeOx nanoparticles are active bifunctional catalysts exhibiting high activity and stability for overall water splitting in base. We achieve 10 mA cm 2 water-splitting current at only 1.51 V for over 200 h without degradation in a two-electrode configuration and 1 M KOH, better than the combination of iridium and platinum as benchmark catalysts.

36 MATERIALS SCIENCE↗

Hematite‐Based Solar Water Splitting in Acidic Solutions: Functionalization by Mono‐ and Multilayers of Iridium Oxygen‐Evolution Catalysts

Abstract Solar water splitting in acidic solutions has important technological implications, but has not been demonstrated to date in a dual absorber photoelectrochemical cell. The lack of functionally stable water‐oxidation catalysts (WOCs) in acids is a key reason for this slow development. The only WOCs that are stable at low pH are Ir‐based systems, which are typically too expensive to be implemented broadly. It is now shown that this deficiency may be corrected by applying an ultra‐thin monolayer of a molecular Ir WOC to hematite for solar water splitting in acidic solutions. The turn‐on voltage is observed to shift cathodically by 250 mV upon the application of a monolayer of the molecular Ir WOC. When the molecular WOC is replaced by a heterogeneous multilayer derivative, stable solar water splitting for over 5 h is achieved with near‐unity Faradaic efficiency.

Li, Wei↗

Photocatalytic water splitting—The untamed dream: A review of recent advances

Here, photocatalytic water splitting using sunlight is a promising technology capable of providing high energy yield without pollutant byproducts. Herein, we review various aspects of this technology including chemical reactions, physiochemical conditions and photocatalyst types such as metal oxides, sulfides, nitrides, nanocomposites, and doped materials followed by recent advances in computational modeling of photoactive materials. As the best-known catalyst for photocatalytic hydrogen and oxygen evolution, TiO 2 is discussed in a separate section, along with its challenges such as the wide band gap, large overpotential for hydrogen evolution, and rapid recombination of produced electron-hole pairs. Various approaches are addressed to overcome these shortcomings, such as doping with different elements, heterojunction catalysts, noble metal deposition, and surface modification. Development of a photocatalytic corrosion resistant, visible light absorbing, defect-tuned material with small particle size is the key to complete the sunlight to hydrogen cycle efficiently. Computational studies have opened new avenues to understand and predict the electronic density of states and band structure of advanced materials and could pave the way for the rational design of efficient photocatalysts for water splitting. Future directions are focused on developing innovative junction architectures, novel synthesis methods and optimizing the existing active materials to enhance charge transfer, visible light absorption, reducing the gas evolution overpotential and maintaining chemical and physical stability

36 MATERIALS SCIENCE↗

Solar Metal Sulfate-Ammonia Based Thermochemical Water Splitting Cycle for Hydrogen Production

Two classes of hybrid/thermochemical water splitting processes for the production of hydrogen and oxygen have been proposed based on (1) metal sulfate-ammonia cycles (2) metal pyrosulfate-ammonia cycles. Methods and systems for a metal sulfate MSO.sub.4--NH3 cycle for producing H2 and O2 from a closed system including feeding an aqueous (NH3)(4)SO3 solution into a photoctalytic reactor to oxidize the aqueous (NH3)(4)SO3 into aqueous (NH3)(2)SO4 and reduce water to hydrogen, mixing the resulting aqueous (NH3)(2)SO4 with metal oxide (e.g. ZnO) to form a slurry, heating the slurry of aqueous (NH4)(2)SO4 and ZnO(s) in the low temperature reactor to produce a gaseous mixture of NH3 and H2O and solid ZnSO4(s), heating solid ZnSO4 at a high temperature reactor to produce a gaseous mixture of SO2 and O2 and solid product ZnO, mixing the gaseous mixture of SO2 and O2 with an NH3 and H2O stream in an absorber to form aqueous (NH4)(2)SO3 solution and separate O2 for aqueous solution, recycling the resultant solution back to the photoreactor and sending ZnO to mix with aqueous (NH4)(2)SO4 solution to close the water splitting cycle wherein gaseous H2 and O2 are the only products output from the closed ZnSO4--NH3 cycle.

Huang, Cunping↗

Facile Solvent-Free Synthesis of Manganese Nickel-Layered Double Hydroxide for Sustainable Water-Splitting Applications

The quest for efficient and sustainable water-splitting electrocatalysts has led to the development of a novel bifunctional material, manganese nickel-layered double hydroxide (MnNi-LDH), which demonstrates promising performance for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Although manganese-based materials are less explored than other transition metals, they offer significant potential owing to their widespread availability, affordability, and customizable electronic characteristics. MnNi-LDH exhibits a nanosheet morphology and a layered structure, which collectively provide numerous accessible active sites and facilitate efficient charge transfer and mass transport. Characterization using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy, and transmission electron microscopy reveals the structural and compositional properties of MnNi-LDH. The oxidation states of Mn and Ni, as determined by XPS, play a crucial role in improving the catalytic activity. Notably, MnNi-LDH demonstrates low overpotentials of 187 mV for OER and 225 mV for HER at 10 mA/cm 2 current density comparable to conventional catalysts. Long-term stability tests show minimal degradation in cell performance over 50 h, with a current density drop of only 0.6153% per hour for the OER and 0.37% per hour for the HER. Further, these findings highlight the potential of MnNi-LDH as a promising and environmentally friendly bifunctional electrocatalyst for water splitting, contributing to the advancement of renewable energy sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solar water splitting by photovoltaic-electrolysis with a solar-to-hydrogen efficiency over 30%

Hydrogen production via electrochemical water splitting is a promising approach for storing solar energy. For this technology to be economically competitive, it is critical to develop water splitting systems with high solar-to-hydrogen (STH) efficiencies. Here we report a photovoltaic-electrolysis system with the highest STH efficiency for any water splitting technology to date, to the best of our knowledge. Our system consists of two polymer electrolyte membrane electrolysers in series with one InGaP/GaAs/GaInNAsSb triple-junction solar cell, which produces a large-enough voltage to drive both electrolysers with no additional energy input. The solar concentration is adjusted such that the maximum power point of the photovoltaic is well matched to the operating capacity of the electrolysers to optimize the system efficiency. The system achieves a 48-h average STH efficiency of 30%. These results demonstrate the potential of photovoltaic-electrolysis systems for cost-effective solar energy storage.

08 HYDROGEN↗

Visualization of facet-dependent pseudo-photocatalytic behavior of TiO 2 nanorods for water splitting using In situ liquid cell TEM

Here, we report an investigation of the pseudo-photocatalytic behavior of rutile TiO 2 nanorods for water splitting observed with liquid cell transmission electron microscopy (TEM). The electron beam serves as a “light” source to initiate the catalytic reaction and a “water-in-salt” aqueous solution is employed as the electrolyte. The observation reveals that bubbles are generated preferentially residing near the {110} facet of a rutile TiO 2 nanorod under a low electron dose rate (9.3–18.6 e-/Å 2 ·s). These bubbles are ascribed to hydrogen gas generated from the pseudo-photocatalytic water splitting. As the electron beam current density increases to 93 e-/Å 2 ·s, bubbles are also found at the {001} and {111} facets as well as in the bulk liquid solution, demonstrating the dominant effects of water electrolysis by electron beam under higher dose rates. The facet-dependent pseudo-photocatalytic behavior of rutile TiO 2 nanorods is further validated using density functional theory (DFT)calculation. Finally, our work establishes a facile liquid cell TEM setup for the study of pseudo-photocatalytic water splitting and it may also be applied to investigation of other photo-activated phenomena occurring at the solid-liquid interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Universal molecular-confined synthesis of interconnected porous metal oxides-N-C frameworks for electrocatalytic water splitting

The rational synthesis of high performance electrocatalysts at low cost for water splitting (hydrogen and oxygen evolution reaction, HER and OER) is highly desirable but remains a key challenge. Herein, we report a versatile molecular-confining route to construct strongly coupled metal oxides-N-C frameworks with interconnected configuration. By simply chelating various transition metal ions with ethylenediaminetetraacetic acid disodium salt (EDTA) in agarose hydrogel and subsequent carbonization, the high specific surface area porous N-C frameworks with strongly coupled metal oxides (e.g., manganese, iron, cobalt, nickel and their mixed oxides) can be prepared as advanced nonprecious water splitting electrocatalysts. For instance, the resulting Co 3 O 4 -N-C frameworks with the high surface area of 153 m 2 g -1 , and the moderate nitrogen content of 1.23%, require an overpotential of 324 mV to afford a current density of 10 mA cm -2 in 0.1 M KOH for OER, superior to commercial RuO 2 catalysts. Density functional theory (DFT) calculations reveal that the strong coupling between N-C and Co 3 O 4 tunes the local electronic structure of Co for high-valence active sites and assures optimal adsorption energies of OER intermediates. Moreover, Co 2 P-N-C electrocatalysts derived from Co 3 O 4 -N-C also exhibit excellent HER performance under 1.0 M KOH with a low overpotential of 139 mV to reach 10 mA cm -2 , a small Tafel slope of 45 mV dec -1 and impressive stability, underscoring the versatility of our synthetic strategy.

36 MATERIALS SCIENCE↗

Photocatalytic pure water splitting activities for ZnGa{sub 2}O{sub 4} synthesized by various methods

Highlights: • High temperature solid state reaction, hydrothermal, sol-gel methods were applied. • All ZnGa{sub 2}O{sub 4} samples show UV-light catalytic activities on pure water splitting. • Bulk ZnGa{sub 2}O{sub 4} has a good photocatalytic activity per specific surface area. • Sol-gel is a superior method to prepare nanosized ZnGa{sub 2}O{sub 4} with a high activity. • The AQY for SG-ZnGa{sub 2}O{sub 4} is 2.6% for pure water splitting under 313 nm irradiation. - Abstract: We studied and compared the photocatalytic water splitting performances for ZnGa{sub 2}O{sub 4} prepared by high temperature solid state reaction (HTSSR), hydrothermal (HY) and sol-gel (SG) methods. HTSSR-ZnGa{sub 2}O{sub 4} has a relative large photocatalytic activity per surface area (1.6 μmol/h/m{sup 2}) in pure water by UV irradiation due to its high crystallinity. The HY- and SG-samples both have small particle sizes (20∼30 nm) and therefore high surface area (20 and 29 m{sup 2}/g, respectively), which leads to superior photocatalytic H{sub 2} evolution rates per unit mass (11.5 and 28.5 μmol/h/g). The apparent quantum yield of SG-ZnGa{sub 2}O{sub 4} for pure water splitting under 313 nm irradiation is 2.6%. The existence of substantial surface defects is the major problem for HY- and SG-ZnGa{sub 2}O{sub 4}. Consequently, the usage of sacrificial agents could greatly enhance the activities and indeed the H{sub 2} evolution rates in 20 Vol. % methanol aqueous solution increase to 100 and 142 μmol/h/g for HY- and SG-ZnGa{sub 2}O{sub 4}, respectively.

36 MATERIALS SCIENCE↗

Roles of Bi, M and VO{sub 4} tetrahedron in photocatalytic properties of novel Bi{sub 0.5}M{sub 0.5}VO{sub 4} (M=La, Eu, Sm and Y) solid solutions for overall water splitting

Novel Bi{sub 0.5}M{sub 0.5}VO{sub 4} (BMV; M=La, Eu, Sm and Y) solid solutions were prepared and studied in this paper. All the samples were proved to produce H{sub 2} and O{sub 2} simultaneously from pure water under the irradiation of UV light. M-O bond lengths were proved to increase with M cations by refining cell parameters and atomic positions. Besides, band gaps, energy gaps and photocatalytic activities of BMV also changed with M cations. Both of M-O and V-O bond lengths were suggested to account for this phenomenon. Inactive A{sub 0.5}Y{sub 0.5}VO{sub 4} (A=La, Ce) for water splitting proved incorporation of Bi rather than distortion of VO{sub 4} tetrahedron was a critical factor for improving efficiency of overall water splitting by facilitating the generation of electron and hole with lighter effective masses. Replacement of Bi by M cations not only gave indirect effect on band structure but also raised position of conduction band minimum to meet requirement of H{sub 2} production. - Graphical abstract: Novel Bi{sub 0.5}M{sub 0.5}VO{sub 4} (M=La, Eu, Sm and Y) solid solutions showed the high and stable photocatalytic activities for overall water splitting with their crystal radii of M elements. Highlights: Black-Right-Pointing-Pointer BMV solid solutions were novel highly efficient V-based photocatalysts for overall water splitting. Black-Right-Pointing-Pointer Photocatalytic activity of BMV solid solution related to the effective ionic radii of M cations. Black-Right-Pointing-Pointer Incorporation of Bi is one of key factors for the highly efficient activity of BMV solid solution. Black-Right-Pointing-Pointer Incorporation of Y is dispensable for H{sub 2} production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced photoelectrochemical water splitting from Si quantum dots/TiO{sub 2} nanotube arrays composite electrodes

Graphical abstract: Si quantum dots were firstly applied to modify TiO{sub 2} nanotubes and enhanced visible light response was demonstrated for the resulted Si QDs/TiO{sub 2} nanocomposite. Si QDs are promising in photoelectrochemical water splitting and photocatalysis since their low cost, abundance and environmentally-friendliness. - Highlights: • A novel nanocomposite Si QDs/TiO{sub 2} nanotubes was fabricated and characterized. • Enhanced photoelectrochemical water splitting was firstly demonstrated for Si QDs/TiO{sub 2}. • The visible light response of TiO{sub 2} increased with the presence of Si QDs. - Abstract: This work firstly introduced Si quantum dots (QDs) to modify TiO{sub 2} nanotube arrays for photoelectrochemical water splitting. A systematic study using surface and optical characterization tools reveals the nature of the combination of Si QDs and TiO{sub 2} nanotube arrays. Scanning electron microscopy and X-ray photoelectron spectroscopy results show that Si QDs were assembled on the surface of vertically aligned TiO{sub 2} nanotube arrays. The UV–vis diffuse reflectance spectra indicate the improved visible light absorbance. The enhanced photoelectrochemical water splitting was demonstrated under visible light illumination and the photocurrent density was 1.6 times larger than that of pristine TiO{sub 2} electrodes. Electrochemical impedance behavior was measured for the electrodes and the impedance is slightly reduced for the nanocomposite electrode with the presence of Si QDs. This work demonstrated that Si QDs would be a novel and effective choice for improving the utilization of visible light for TiO{sub 2} nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗