Search NASA⌕ Search

SEARCH · Search NASA

Results for “absorption coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Two-photon absorption in SiO{sub 2}- and (SiO{sub 2} + GeO{sub 2})-based fibres at a wavelength of 349 nm

The nonlinear two-photon light absorption coefficients have been measured in an optical fibre with a quartz glass (SiO{sub 2}) core and in a fibre with a germanosilicate glass (SiO{sub 2} + GeO{sub 2}) core. The two-photon absorption coefficient β measured at a wavelength of 349 nm in the (SiO{sub 2} + GeO{sub 2})-based fibre (13.7 cm TW{sup -1}) multiply exceeds that for the pure quartz glass optical fibre (0.54 cm TW{sup -1}). (nonlinear optical phenomena)

36 MATERIALS SCIENCE↗

Two Photon Absorption And Refraction in Bulk of the Semiconducting Materials

Fast electronic detection systems have opened up a number of new fields like nonlinear optics, optical communication, coherent optics, optical bistability, two/four wave mixing. The interest in this field has been stimulated by the importance of multiphoton processes in many fundamental aspects of physics. It has proved to be an invaluable tool for determining the optical and electronic properties of the solids because of the fact that one gets the information about the bulk of the material rather than the surface one. In this paper we report, the measurement of the nonlinear absorption and refraction from the band gap to half-band gap region of bulk of semiconductors in the direct and indirect band gap crystals with nanosecond laser. The measured theoretical calculated values of two-photon absorption coefficients ({beta}) and nonlinear refraction n{sub 2}({omega}) of direct band gap crystal match the earlier reported theoretical predictions. By making use of these theoretical calculated values, we have estimated {beta} and n{sub 2}({omega}) in the case of indirect band gap crystals. Low value of absorption coefficient in case of indirect band gap crystals have been attributed to phonon assisted transition while reduction in nonlinear refraction is due to the rise in saturation taking place in the absorption.

36 MATERIALS SCIENCE↗

Specific features of photoelectric and optical properties of amorphous hydrogenated silicon films produced by plasmochemical deposition from monosilane-hydrogen mixture

Photoelectric and optical properties of amorphous hydrogenated silicon films produced by plasmochemical deposition from a monosilane-hydrogen mixture have been studied at a fraction of hydrogen in the mixture that corresponds to the onset of formation of a nanocrystalline phase in the structure of the films obtained. A behavior untypical of amorphous hydrogenated silicon films is observed for the photoconductivity and the spectral dependence of the absorption coefficient. The temperature dependences of the photoconductivity in the films under study are found to vary with the energy of incident photons. At a photon energy of 1.3 eV, temperature quenching of photoconductivity is observed. Prolonged illumination of the films led to a certain decrease in the absorption coefficient at photon energies in the range 1.2-1.5 eV. The results obtained are attributed to the possible presence of silicon nanocrystals in the structure of the films and to the influence of these nanocrystals on their photoelectric and optical properties.

36 MATERIALS SCIENCE↗

Optical properties analysis of Ta-doped TiO{sub 2} thin films on LaAlO{sub 3} substrates

We study optical properties of Ta-doped TiO{sub 2} thin film on LaAlO{sub 3} substrate using spectroscopy ellipsometry (SE) analysis at energy range of 0.5 – 6.5 eV. Room temperature SE data for Ψ (amplitude ratio) and Δ (phase difference) between p- and s- polarized light waves are taken with multiple incident angles at several spots on the samples. Here, absorption coefficient has been extracted from SE measurements at photon incident angle of 70° for different Ta concentration (0.01, 0.4, and 5 at. %). Multilayer modelling is performed which takes into account reflections at each interface through Fresnel coefficients to obtain reasonably well the fitting of Ψ and Δ data simultaneously. As the results, we estimate that film thickness increases by increasing Ta concentration accompanied by the formation of a new electronic structure. By increasing Ta impurities, the blueshift of absorption coefficient (α) peaks is observable. This result indicates that TiO{sub 2} thin film becomes optically resistive by introducing Ta doping. Schematic model of interband transition inTiO{sub 2}:Ta will be proposed base on obtained optical properties. This study enables us to predict the role of Ta doping on the electronic and optical band structures of TiO{sub 2} thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-regulated growth and tunable properties of CuSbS 2 solar absorbers

Polycrystalline thin film copper chalcogenide solar cells show remarkable efficiencies, and analogous but less-explored semiconducting materials may hold similar promise. With consideration of elemental abundance and process scalability, we explore the potential of the Cu–Sb–S material system for photovoltaic applications. Using a high-throughput combinatorial approach, Cu–Sb–S libraries were synthesized by magnetron co-sputtering of Cu 2 S and Sb 2 S 3 targets and evaluated by a suite of spatially resolved characterization techniques. The resulting compounds include Cu 1.8 S (digenite), Cu 12 Sb 4 S 13 (tetrahedrite), CuSbS 2 (chalcostibite), and Sb 2 S 3 (stibnite). Of the two ternary phases synthesized, CuSbS 2 was found to have the most potential, however, when deposited at low temperatures its electrical conductivity varied by several orders of magnitude due to the presence of impurities. To address this issue, we developed a self-regulated approach to synthesize stoichiometric CuSbS 2 films using excess Sb 2 S 3 vapor at elevated substrate temperatures. Theoretical calculations explain that phase-pure CuSbS2 is expected to be formed over a relatively wide range of temperatures and pressures, bound by the sublimation of Sb2S3 and decomposition of CuSbS2. The carrier concentration of CuSbS 2 films produced within this regime was tunable from 10 16 – 10 18 cm –3 through appropriate control of Sb 2 S 3 flux rate and substrate temperature. CuSbS 2 displayed a sharp optical absorption onset indicative of a direct transition at 1.5 eV and an absorption coefficient of 10 5 cm −1 within 0.3 eV of the onset. Furthermore, the results of this study suggest that CuSbS 2 holds promise for solar energy conversion due to its tolerant processing window, tunable carrier concentration, solar-matched band gap, and high absorption coefficient.

14 SOLAR ENERGY↗

Optimization-Based Approach for Joint X-Ray Fluorescence and Transmission Tomographic Inversion

Fluorescence tomographic reconstruction, based on the detection of photons coming from fluorescent emission, can be used for revealing the internal elemental composition of a sample. On the other hand, conventional X-ray transmission tomography can be used for reconstructing the spatial distribution of the absorption coefficient inside a sample. In this work, we integrate both X-ray fluorescence and X-ray transmission data modalities and formulate a nonlinear optimization-based approach for reconstruction of the elemental composition of a given object. This model provides a simultaneous reconstruction of both the quantitative spatial distribution of all elements and the absorption effect in the sample. Mathematically speaking, we show that compared with the single-modality inversion (i.e., the X-ray transmission or fluorescence alone), the joint inversion provides a better-posed problem, which implies a better recovery. Therefore, the challenges in X-ray fluorescence tomography arising mainly from the effects of self-absorption in the sample are partially mitigated. The use of this technique is demonstrated on the reconstruction of several synthetic samples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Intermediate band solar cell simulation use InAs quantum dot in GaAs

Intermediate band solar cell (IBSC) has become a new approach in increasing solar cell efficiency significantly. One way to create intermediate band is by proposing quantum dots (QD) technology. One of the important aspects in utilizing IBSC is the absorption of light. In this work we simulated the influence of QD arrangement in order to increase absorption coefficient and solar cell efficiency. We also simulated the influence of QD size to capture a wider light spectrum. We present a simple calculation method with low computing power demand. Results show that the increasing in quantum dot size can increase in capturing wider spectrum of light. Arrangement InAs QD in bulk material GaAs can capture wider spectrum of light and increase the absorption coefficient. The arrangement InAs QD 2 nm in GaAs bulk can increase solar cell efficiency up to 49.68%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generalizing the flash technique in the front-face configuration to measure the thermal diffusivity of semitransparent solids

In this work, we have extended the front-face flash method to retrieve simultaneously the thermal diffusivity and the optical absorption coefficient of semitransparent plates. A complete theoretical model that allows calculating the front surface temperature rise of the sample has been developed. It takes into consideration additional effects, such as multiple reflections of the heating light beam inside the sample, heat losses by convection and radiation, transparency of the sample to infrared wavelengths, and heating pulse duration. Measurements performed on calibrated solids, covering a wide range of absorption coefficients (from transparent to opaque) and thermal diffusivities, validate the proposed method.

42 ENGINEERING↗

The Gaussian nature of the band-edge of ZnO microcrystalline thin films

A straightforward analytical approach based on the derivative of the absorption coefficient is presented, which enables probing the nature of the band edge (BE) of ZnO microcrystalline films. The study was conducted via transmission experiments at temperatures of 77–532 K and repeated for samples annealed up to 1073 K. It was found that the derivative of the natural log of the BE absorption coefficient resulted in a Gaussian function. The Gaussian linewidth is used in the electron–phonon (e–p) interaction model to characterize the defect-state of the films. The BE of the as-grown film was found to exhibit no thermal dependence and no e–p coupling, indicative of a disordered crystal. Upon annealing and improvement of the film quality, the thermal phonons became more activated, but only above room temperature with a phonon energy of ~75 meV, while up to room temperature, the impact of phonons on the BE is insignificant. A disorder–order transition was determined to take place at an annealing temperature of ~673 K. X-ray diffraction concurs with these results. The study indicates that the prevalent defects are of structural nature due to the inherent granular morphology of the films. This defect was found to dominate the behavior of the BE even at the elevated temperature regime rather than thermal phonons.

36 MATERIALS SCIENCE↗

CAN THE LYMAN CONTINUUM LEAKED OUT OF H II REGIONS EXPLAIN DIFFUSE IONIZED GAS?

We present an attempt to explain the diffuse Halpha emission of a face-on galaxy M 51 with the 'standard' photoionization model, in which the Lyman continuum (Lyc) escaping from H II regions propagates large distances into the diffuse interstellar medium (ISM). The diffuse Halpha emission of M 51 is analyzed using thin slab models and exponential disk models in the context of the 'on-the-spot' approximation. The scale height of the ionized gas needed to explain the diffuse Halpha emission with the scenario is found to be of the order of {approx}1-2 kpc, consistent with those of our Galaxy and edge-on galaxies. The model also provides a vertical profile, when the galaxy is viewed edge-on, consisting of two-exponential components. However, it is found that an incredibly low absorption coefficient of kappa{sub 0} {approx} 0.4-0.8 kpc{sup -1} at the galactic plane, or, equivalently, an effective cross section as low as sigma{sub eff} {approx} 10{sup -5} of the photoionization cross section at 912 A is required to allow the stellar Lyc photons to travel through the H I disk. Such a low absorption coefficient is out of accord with the properties of the ISM. Furthermore, we found that even the model that has the diffuse ionized gas (DIG) phase only and no H I gas phase shows highly concentrated Halpha emissions around H II regions, and can account for only {approx}<26% of the Halpha luminosity of the DIG. This result places a strong constraint on the ionizing source of the DIG. We also report that the Halpha intensity distribution functions not only of the DIG, but also of H II regions in M 51, appear to be lognormal.

79 ASTRONOMY AND ASTROPHYSICS↗

Solvothermal synthesis and study of nonlinear optical properties of nanocrystalline thallium doped bismuth telluride

Nanocrystalline Bismuth telluride and thallium (4 mol %) doped Bismuth telluride were synthesized through hydrothermal method. The as-prepared products were characterized using Powder X-ray Diffraction, High Resolution Transmission Electron Microscopy, Energy Dispersive X-Ray Spectroscopy, UV-Visible spectroscopy and Fourier Transform Infrared Spectroscopy. Powder XRD results revealed the crystalline nature of the obtained phases. HRTEM showed the particle-like morphology of the products. The decrease in the absorption coefficient due to thallium doping was observed in FTIR spectra. The intensity dependent nonlinear optical properties of nanocrystalline bismuth telluride and thallium doped bismuth telluride were studied using the Z-scan technique in open-aperture configuration. Bismuth telluride doped with thallium showed enhanced nonlinear optical response compared to pristine bismuth telluride and hence could be used as a potential candidate for optical power limiting applications. - Graphical Abstract: Nonlinear transmission (Z-scan) curves of nanocrystalline bismuth telluride ({Delta}) and thallium doped bismuth telluride ({open_square}). Thallium doped bismuth telluride showed enhanced nonlinear absorption compared to bismuth telluride. Inset: TEM micrograph of bismuth telluride nanocrystallites. Highlights: Black-Right-Pointing-Pointer Synthesis of Nanocrystalline Bi{sub 2}Te{sub 3} and Thallium doped Bi{sub 2}Te{sub 3} through solvothermal method. Black-Right-Pointing-Pointer Reduced absorption coefficient due to thallium doping found from IR spectroscopy. Black-Right-Pointing-Pointer Open-aperture Z-scan technique for nonlinear optical studies. Black-Right-Pointing-Pointer Two photon absorption based model for theoretical fitting of Z-scan data. Black-Right-Pointing-Pointer Enhanced nonlinear absorption in Thallium doped Bi{sub 2}Te{sub 3} - potential candidate for optical power limiting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvothermal synthesis and characterization of a CuInTe{sub 2} absorber for thin-film photovoltaics

Graphical abstract: Display Omitted Highlights: ► We tried to fabricate a CuInTe{sub 2} compound via the solvothermal reaction. ► A resulting sample exhibited the tetragonal crystalline structure of CuInTe{sub 2}. ► The sample showed a wide absorption range from the NIR through the visible region. ► The sample was confirmed to record a favorable absorption coefficient. -- Abstract: A solution-based process was developed for the preparation of a CuInTe{sub 2} material that can be used as an absorber in thin-film photovoltaics. We performed a solvothermal synthesis under specific processing conditions to generate the CuInTe{sub 2} material. The resulting product showed different diffraction patterns and morphology depending on the reaction time and temperature. We optimized the preparation process by investigating the reaction parameters to obtain CuInTe{sub 2} particles with the desired properties. The resulting product exhibited a broad absorption spectrum from the near infrared through the visible region and had a favorable absorption coefficient.

36 MATERIALS SCIENCE↗

Angular Selectivity of Amplitude-Phase Holographic Gratings in Polymer Material with Phenanthrenequinone

The values of the amplitudes of the refractive index and absorption coefficient modulations in volume hologram gratings, which were recorded in a polymer material with phenanthrenequinone (PQ), have been determined by the results of the approximation of the angular selectivity contours, which were measured at wavelengths of 450, 473, 532, and 633 nm before and after the development of holograms, resulting from the diffusion of PQ molecules in a glassy polymer. Immediately after recording, before the diffusion development, the holograms are mixed amplitude-phase in the PQ absorption spectral region and phase for the red light, which is not absorbed by it (633 nm), and become purely phase during the development regardless of the wavelength. The shape of the selectivity contour of the undeveloped hologram indicates the counterphase between the modulations of the absorption coefficient and refractive index, illustrating the concept of complementary gratings, on which the principle of hologram formation in the material under consideration is based.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and characteristics of spray deposited CuInS{sub 2} nanocrystals thin films for photovoltaic applications

Graphical abstract: - Highlights: • CuInS{sub 2} nanocrystals thin films were synthesized by spray pyrolysis technique. • They are polycrystalline and have chalcopyrite (tetragonal) structure. • They have high absorption coefficient ∼10{sup 4} cm{sup −1} and optimum band gap of 1.55 eV. • They showed excellent opto-electronic properties employable in photovoltaics. - Abstract: Nanocrystalline thin films of CuInS{sub 2}, an attractive absorber material for highly efficient and terrestrial photovoltaic devices, were deposited on ultraclean glass substrates using spray pyrolysis technique. The prepared films were characterized by FESEM, FETEM, HRTEM, AFM, XRD, optical absorption spectroscopy, photoluminescence and current–voltage characteristics. The films exhibit almost smooth, dense and uniform topography; and have nano-sized particles 40–60 nm of CuInS{sub 2}. XRD data show that the films are polycrystalline and have chalcopyrite (tetragonal) structure with crystallite size 45–60 nm. Optical absorption studies show that the band gap of spray deposited CuInS{sub 2} films is 1.55 eV, while absorption coefficient is of ∼10{sup 5} cm{sup −1}. PL spectra have only one peak at 1.43 eV which may be attributed to the excitonic recombination through donor–acceptor impurity levels in the sample. Furthermore, CdS/CuInS{sub 2} heterojunction was also produced onto ITO coated glass substrate to evaluate solar cell parameters such as short circuit current density, open circuit voltage, fill factor and conversion efficiency.

36 MATERIALS SCIENCE↗

Optimization and Characterisation of Amorphous Iron Disilicide formed by Ion Beam Mixing of Fe/Si Multilayer Structures for Photovoltaic Applications

This study presents an optimization and characterization of amorphous Iron Disilicide (a-FeSi{sub 2}) synthesized using Ion Beam Mixing (IBM) of Fe/Si multilayer structures. The layers were deposited using RF magnetron sputtering, and subsequently irradiated with Ar{sup +} and Fe{sup +} beams of 150 and 200 keV. Rutherford Back Scattering (RBS) analysis was used to determine the structure and level of silicidation of the samples. The nature of the band-gap and the optical absorption coefficients were determined by optical transmission analysis. The results demonstrate that the synthesis of a-FeSi{sub 2} can be achieved using this technique, with the total level of silicidation being highly dependant upon the initial structure configuration and beam parameters. Direct band-gap energies of {approx}0.90 eV have been observed for those samples with the highest levels of silicidation, with optical absorption coefficients of {approx}10{sup 4} cm{sup -1}. Therefore this method of fabrication has been shown to produce a-FeSi{sub 2} layers without the need for post-synthesis treatment, using established technologies without compromising the optical properties that make this material such a promising semiconductor for the photovoltaics market.

36 MATERIALS SCIENCE↗

Self-Referenced Method for Estimating Refractive Index and Absolute Absorption of Loose Semiconductor Powders

The absolute absorption coefficient, α(E), is a critical design parameter for devices using semiconductors for light harvesting associated with renewable energy production, both for classic technologies such as photovoltaics and for emerging technologies such as direct solar fuel production. While α(E) is well-known for many classic simple semiconductors used in photovoltaic applications, the absolute values of α(E) are typically unknown for the complex semiconductors being explored for solar fuel production due to the absence of single crystals or crystalline epitaxial films that are needed for conventional methods of determining α(E). In this work, a simple self-referenced method for estimating both the refractive indices, n(E), and absolute absorption coefficients, α(E), for loose powder samples using diffuse reflectance data is demonstrated. In this method, the sample refractive index can be deduced by refining n to maximize the agreement between the relative absorption spectrum calculated from bidirectional reflectance data (calculated through a Hapke transform which depends on n) and integrating sphere diffuse reflectance data (calculated through a Kubleka–Munk transform which does not depend on n). This new method can be quickly used to screen the suitability of emerging semiconductor systems for light-harvesting applications. The effectiveness of this approach is tested using the simple classic semiconductors Ge and Fe 2 O 3 as well as the complex semiconductors La 2 MoO 5 and La 4 Mo 2 O 11 . The method is shown to work well for powders with a narrow size distribution (exemplified by Fe 2 O 3 ) and to be ineffective for semiconductors with a broad size distribution (exemplified by Ge). As such, it provides a means for rapidly estimating the absolute optical properties of complex solids which are only available as loose powders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Infrared, visible and ultraviolet absorptions of transition metal doped ZnS crystals with spin-polarized bands

The formation energies, electronic structures and optical properties of TM:ZnS systems (TM=Cr{sup 2+}, Mn{sup 2+}, Fe{sup 2+}, Co{sup 2+} and Ni{sup 2+}) are investigated by using the first principles method. It is found that the wurtzite and zinc-blende structures have about the same stability, and thus can coexist in the TM:ZnS system. From the wurtzite TM:ZnS, especially, a partially filled intermediate band (IB) is obtained at TM=Cr{sup 2+}, Ni{sup 2+} and Fe{sup 2+}, while it is absent at TM=Mn{sup 2+} and Co{sup 2+}. The additional absorptions are obtained in infrared, visible and ultraviolet (UV) regions, due to the completely spin-polarized IB at Fermi level. The results are very helpful for both the designs and applications of TM:ZnS opto-electronics devices, such as solar-cell prototype. -- Graphical abstract: Absorption coefficients of w-TM{sub x}Zn{sub 1-x}S crystals (TM=Cr{sup 2+}, Mn{sup 2+}, Fe{sup 2+}, Co{sup 2+} and Ni{sup 2+}) at x=0.028. The results may be helpful for the design and applications of TM:ZnS devices, especially for the new high efficiency solar-cell prototype, UV detector and UV LEDs. Display Omitted Research highlights: > It is found that the wurtzite and zinc-blende structures can coexist in TM:ZnS. > An intermediate band is obtained in TM:ZnS at TM=Cr{sup 2+}, Ni{sup 2+} and Fe{sup 2+}. > The absorption coefficients are obtained in infrared, visible and ultraviolet regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗