Search NASA⌕ Search

SEARCH · Search NASA

Results for “abstract data types”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

High-pressure crystallography and compression behavior of the alkali-scandium-germanate end-members LiScGe{sub 2}O{sub 6} and NaScGe{sub 2}O{sub 6}

Synthetic single-crystal samples of the monoclinic pyroxene-type compounds LiScGe{sub 2}O{sub 6} and NaScGe{sub 2}O{sub 6} have been investigated by means of in-situ high-pressure Raman spectroscopy and X-ray diffraction techniques. Crystal-structure investigations at hydrostatic high-pressure conditions were carried out in addition to 10{sup −4} GPa measurements using the diamond-anvil cell technique up to ∼9.5 GPa. Both samples, LiScGe{sub 2}O{sub 6} (space group P2{sub 1}/c, a=9.9999(8) Å, b=9.1040(2) Å, c=5.4610(2) Å, β=109.240(2)° at 10{sup −4} GPa) and NaScGe{sub 2}O{sub 6} (space group C2/c, a=10.1678(5) Å, b=9.1583(5) Å, c=5.5672(3) Å, β=107.257(3)° at 10{sup −4} GPa), did not undergo any compression-induced change of symmetry as confirmed by single-crystal diffraction patterns. Series of high-pressure Raman spectra confirm the absence of any symmetry-related structural phase transition with band positions shifting in a smooth fashion on increasing pressure. High-precision lattice parameters, as determined from X-ray diffraction profile analyzes, were used to monitor both the compressibilities of lattice directions and the evolution of the unit-cell volume with pressure. The experimental data was fitted using a third-order Birch–Murnaghan equation-of-state approach and parameterized fits yield V{sub 0}=469.60(11) Å{sup 3}, K{sub 0}=85.6(1.3) GPa and K′=5.9(4) for LiScGe{sub 2}O{sub 6} and V{sub 0}=495.95(19) Å{sup 3}, K{sub 0}=79(3) GPa and K′=3.9(1.1) for NaScGe{sub 2}O{sub 6}. The systematic comparison of volume properties and compression behavior shows that both pyroxene-type compounds follow established trend lines with similar slopes in comparing volumes versus bulk moduli, and confirm that the position of trend lines in this systematics describing variations with M1 critically depend on the type of M2 and T cations, independent on the space-group symmetry. - Graphical abstract: Polyhedral model of the LiScGe{sub 2}O{sub 6} crystal structure at 9.51 GPa. Red and blue: crystallographic distinctive germanium-tetrahedral chains; Green: scandium-octahedral chains; Purple: lithium atoms. - Highlights: • High-quality high-pressure data of previously uninvestigated germanate compounds. • Results confirmed through complementing sXRD with Raman spectroscopy. • Comparison and relation of high-pressure pyroxene-type compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The ferroelectric phase of CdTiO{sub 3}: A powder neutron diffraction study

The synthesis of bulk samples of polycrystalline CdTiO{sub 3} in both the rhombohedral ilmenite and orthorhombic perovskite forms is described and the structures of these have been refined using powder neutron diffraction data. This involved the preparation of samples enriched in {sup 114}Cd. Cooling perovskite-type CdTiO{sub 3} to 4 K induces a ferroelectric phase transition, with the neutron data suggesting the low temperature structure is in Pna2{sub 1}. Mode analysis shows the polar mode to be dominant at low temperatures. The ilmenite-structure of CdTiO{sub 3} is compared with that of ZnTiO{sub 3}. The refined scattering length of the {sup 114}Cd is estimated to be 5.56 fm. Attempts to dope CdTiO{sub 3} with Ca and Sr are described. - Graphical abstract: The structure of three phases of CdTiO{sub 3} have been refined using high resolution powder neutron diffraction data. This involved the preparation of samples enriched in {sup 114}Cd. Cooling perovskite-type CdTiO{sub 3} to 4 K results in a ferroelectric phase in Pna2{sub 1}. Highlights: > Both the ilmenite and perovskite forms of CdTiO{sub 3} have been prepared using {sup 114}Cd. > Cooling the perovskite form results in a ferroelectric phase. > The structures of these are refined from powder neutron diffraction data. > Attempts to dope CdTiO{sub 3} are described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative Hydrophobic Core Dynamics Between Wild‐Type Amyloid‐β Fibrils, Glutamate‐3 Truncation, and Serine‐8 Phosphorylation

Abstract Post‐translational modifications (PTMs) of amyloid‐β (Aβ) species are implicated in the modulation of overall toxicities and aggregation propensities. We investigated the internal dynamics in the hydrophobic core of the truncated ΔE3 mutant fibrils of Aβ 1–40 and compared them with prior and new data for wild‐type fibrils as well as with phosphorylated S8 fibrils. Deuteron static solid‐state NMR techniques, spanning line‐shape analysis, longitudinal relaxation, and chemical exchange saturation transfer methods, were employed to assess the rotameric jumps of several methyl‐bearing and aromatic groups in the core of the fibrils. Taken together, the results indicate the rather significant influence of the PTMs on the hydrophobic core dynamics, which propagates far beyond the local site of the chemical modification. The phosphorylated S8 fibrils display an overall rigidifying of the core based on the higher activation barriers of motions than the wild‐type fibrils, whereas the ΔE3 fibrils induce a broader variety of changes, some of which are thermodynamic in nature rather than the kinetic ones.

Vugmeyster, Liliya↗

Crystal and electronic structures of two new iron selenides: Ba{sub 4}Fe{sub 3}Se{sub 10} and BaFe{sub 2}Se{sub 4}

The new ternary selenides, Ba{sub 4}Fe{sub 3}Se{sub 10} and BaFe{sub 2}Se{sub 4,} were synthesized from a reaction of appropriate amounts of elements at high temperature in a silica sealed tube, and their structures were resolved using X-ray single crystal diffraction. BaFe{sub 2}Se{sub 4} crystallizes in the tetragonal space group I4/m with a=8.008(9) Å and c=5.483(3) Å as cell parameters. It is a new compound with a structure isotypical to the sulfide BaFe{sub 2}S{sub 4} which belongs to the infinitely adaptive structures series Ba{sub 1+x}Fe{sub 2}S{sub 4}. The second compound, Ba{sub 4}Fe{sub 3}Se{sub 10}, crystallizes in the monoclinic space group P2{sub 1}/n with a=8.8593(1) Å, b=8.8073(1) Å, c=12.2724(1) Å and β=109.037(6)° as cell parameters. It exhibits an original structure with a new type of iron selenide polyhedra. These data were consistent with the powder X-ray diffraction and TEM analyses. Their electronic structures point towards metallicity and electronic correlations for both selenides. - Graphical abstract: Experimental [010] oriented ED pattern and corresponding HREM image of Ba{sub 4}Fe{sub 3}Se{sub 10}. Image calculated with a focus and thickness to 15nm and 8 nm respectively is inserted. Bright contrasts are correlated to Se rows belonging to FeSe{sub 3}(Se{sub 2}){sup 2−}–FeSe{sub 6}–FeSe{sub 3}(Se{sub 2}){sup 2−} trimers. The corresponding structure projection is also shown. - Highlights: • Two new barium iron selenide compounds. • An original structure type Ba4Fe3Se10. • Electronic structure calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase stabilities of pyrite-related MTCh compounds (M=Ni, Pd, Pt; T=Si, Ge, Sn, Pb; Ch=S, Se, Te): A systematic DFT study

Pyrite-type and related systems appear for a wide range of binary and ternary combinations of transition metals and main group elements that form Zintl type dumbbell anion units. Those representatives with 20 valence electrons exhibit an extraordinary structural flexibility and interesting properties as low-gap semiconductors or thermoelectric and electrode materials. This work is devoted to the systematic exploration of novel compounds within the class of MTCh compounds (M=Ni, Pd, Pt; T=Si, Ge, Sn, Pb; Ch=S, Se, Te) by means of density functional calculations. Their preferred structures are predicted from an extended scheme of colored pyrites and marcasites. To determine their stabilities, competing binary MT{sub 2} and MCh{sub 2} boundary phases are taken into account as well as ternary M{sub 3}T{sub 2}Ch{sub 2} and M{sub 2}T{sub 3}Ch{sub 3} systems. Recently established stability diagrams are presented to account for MTCh ordering phenomena with a focus on a not-yet-reported ordering variant of the NiAs{sub 2} type. Due to the good agreement with experimental data available for several PtTCh systems, the predictions for the residual systems are considered sufficiently accurate. - Graphical abstract: Compositional and structural stability of MTCh compounds is investigated from first principle calculations. A conceptional approach is presented to study and predict novel stable and metastable compounds and structures of low gap semiconductors with TCh dumbbell units that are isoelectronic and structurally related to pyrite (FeS{sub 2}). - Highlights: • Study of compositional stability of MTCh vs. M{sub 3}T{sub 2}Ch{sub 2} and M{sub 2}T{sub 3}Ch{sub 3} compounds. • Study of structural stability of known and novel MTCh compounds. • Prediction of novel stable and metastable structures and compounds isoelectronic to pyrite, FeS{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The luminosity function of ringed galaxies

ABSTRACT We perform an analysis of the luminosity functions (LFs) of two types of ringed galaxies – polar-ring galaxies and collisional ring galaxies – using data from the Sloan Digital Sky Survey (SDSS). Both classes of galaxies were formed as a result of interaction with their environment and they are very rare objects. We constructed LFs of galaxies by different methods and found their approximations by the Schechter function. The luminosity functions of both types of galaxies show a systematic fall-off at low luminosities. The polar structures around bright (Mr ≤ −20m) and red (g − r > +0.8) galaxies are about twice as common as around blue ones. The LF of collisional rings is shifted towards brighter luminosities compared to polar-ring galaxies. We analysed the published data on the ringed galaxies in several deep fields and confirmed the increase in their volume density with redshift: up to z ∼ 1 their density grows as (1 + z)m, where m ≳ 5.

79 ASTRONOMY AND ASTROPHYSICS↗

(abstract) Measurement of Aerodynamic Roughness Using Radar Backscatter over Vegetated Surfaces

Gathering of local information from remote platforms is often a more cost-effective way of obtaining the required data type than are local measurements. A good example is the collection of wind regime data in order to infer the amount and type of aeolian transport at a given site. This paper describes a potential mechanism for remotely inferring the wind regime from synthetic aperture radar data and describes a project to estimate the practicality of using such a mechanism. Both radar backscatter and wind flow are functions of the roughness of the site under study. It is therefore reasonable to suspect that a fairly well-behaved relationship might exist between normalized radar backscatter coefficient and aerodynamic roughness length. Aeolian transport of small particles depends in turn on wind flow and is an important quantity to measure for several economic-related reasons, but the direct measurement of wind flow regime generally involves construction of wind towers and many days of data collection, making such data extremely expensive and prohibitive in areas that cannot be easily accessed. For both desert and vegetated sites where extensive wind profile data already exist, a NASA airborne multifrequency, multipolarization radar was used to acquire radar data at several incidence angles. At the vegetated sites, vegetation height varied from tens of centimeters to several meters, and surface roughness was a few centimeters.

radar↗

Novel superstructure of the rocksalt type and element distribution in germanium tin antimony tellurides

A superstructure of the rocksalt-type observed in quenched CVT-grown single crystals of Ge{sub 3.25(7)}Sn{sub 1.10(3)}Sb{sub 1.10(3)}Te{sub 6} was elucidated by X-ray diffraction using fourfold twinned crystals (space group P3{sup ¯}m1, a=4.280(1) Å, c=20.966(3) Å). The structure is built up of distorted rocksalt-type building blocks typical for long-range ordered GST materials and substitution variants thereof. In contrast to those phases, an exclusive ABC-type cubic stacking sequence of the Te-atom layers is present. High-resolution electron microscopy reveals spheroidal domains with this structure (average diameter 25 nm) whose stacking direction is perpendicular to the 〈1 1 1〉 directions of the basic rocksalt-type structure. Additional slab-like domains with a lateral extension up to 1 µm occasionally result in a hierarchical structure motif. Due to the similar electron counts of the elements involved, resonant diffraction was used in order to elucidate the element distribution in rocksalt-type building blocks of the stable layered compound 39R-Ge{sub 3}SnSb{sub 2}Te{sub 7} (R3{sup ¯}m, a=4.24990(4) Å, c=73.4677(9) Å). Sb tends to occupy the atom site close to the van der Waals gaps while Ge concentrates in the center of the building blocks. - Graphical abstract: High-resolution transmission electron micrograph, SAED pattern and reciprocal lattice section of X-ray single crystal data of Ge{sub 3.25}Sn{sub 1.1}Sb{sub 1.1}Te{sub 6} with an 11P-type superstructure of the rocksalt type. - Highlights: • A novel superstructure of the rocksalt-type in the system Ge–Sn–Sb–Te is elucidated. • It combines the cubic stacking of the HT phase with building blocks of the RT phase. • It indicates the ordering mechanism during the phase transition of GST materials. • A hierarchical structure motif is promising with respect to the reduction of κ{sub L}. • Resonant diffraction reveals the element distribution in 39R-Ge{sub 3}SnSb{sub 2}Te{sub 7}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of histone post-translational modifications using deep learning

Abstract Motivation Histone post-translational modifications (PTMs) are involved in a variety of essential regulatory processes in the cell, including transcription control. Recent studies have shown that histone PTMs can be accurately predicted from the knowledge of transcription factor binding or DNase hypersensitivity data. Similarly, it has been shown that one can predict PTMs from the underlying DNA primary sequence. Results In this study, we introduce a deep learning architecture called DeepPTM for predicting histone PTMs from transcription factor binding data and the primary DNA sequence. Extensive experimental results show that our deep learning model outperforms the prediction accuracy of the model proposed in Benveniste et al. (PNAS 2014) and DeepHistone (BMC Genomics 2019). The competitive advantage of our framework lies in the synergistic use of deep learning combined with an effective pre-processing step. Our classification framework has also enabled the discovery that the knowledge of a small subset of transcription factors (which are histone-PTM and cell-type-specific) can provide almost the same prediction accuracy that can be obtained using all the transcription factors data. Availabilityand implementation https://github.com/dDipankar/DeepPTM. Supplementary information Supplementary data are available at Bioinformatics online.

Baisya, Dipankar Ranjan (ORCID:0000000267847359)↗

Low-temperature structural phase transition in synthetic libethenite Cu{sub 2}PO{sub 4}OH

Low-temperature structural properties of the synthetic mineral libethenite Cu{sub 2}PO{sub 4}OH were investigated by single-crystal X-ray diffraction, synchrotron X-ray powder diffraction, specific heat measurements, and Raman spectroscopy. A second-order structural phase transition from the Pnnm symmetry (a=8.0553(8) A, b=8.3750(9) A, c=5.8818(6) A at 180 K) to the P2{sub 1}/n symmetry (a=8.0545(8) A, b=8.3622(9) A, c=5.8755(6) A, {beta}=90.0012(15) at 120 K) was found at 160 K during cooling. At 120 K, the monoclinic angle is 90.0012(15) from single crystal X-ray data vs 90.083(1) from powder X-ray diffraction data. The P2{sub 1}/n-to-Pnnm transition may be a general feature of the adamite-type compounds, M{sub 2}XO{sub 4}OH. - Graphical Abstract: Fragments of experimental synchrotron X-ray powder diffraction patterns of Cu{sub 2}PO{sub 4}OH between 100 and 280 K. Arrows show additional reflections that appear below 160 K in the monoclinic P2{sub 1}/n phase. Highlights: > A low-temperature phase transition was found in the mineral libethenite Cu{sub 2}PO{sub 4}OH. > No magnetic anomalies and weak specific heat anomalies are detected. > Phase transition is of the second order. > Libethenite may exemplify a general feature of the adamite-type compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PSP Testing at NASA Ames Research Center

Pressure sensitive paints (PSPs) are now used routinely for measuring surface pressures on wind tunnel models at transonic and supersonic Mach numbers. The method utilizes a surface coating containing fluorescent or phosphorescent materials, the brightness of which varies with the local air pressure on the surface. The present paper will summarize PSP activities (in progress and planned) at the NASA Ames Research Center. One of the main accomplishments at NASA Ames has been the development of a PSP measurement system that is production testing capable. This system has been integrated successfully into the large-scale wind tunnel facilities at Ames. There are several problems related to PSP testing which are unique to large-scale wind tunnel testing. The hardware is often difficult to set-up and must operate under harsh conditions (e.g. high pressures and low temperatures). The data acquisition and reduction times need to be kept to a minimum so that the overall wind tunnel productivity is not compromised. The pressure sensitive paints needs to be very robust; the paints must readily adhere to different surfaces with varying geometries and remain functional for long running times. The paint must have well understood, and preferably minimal, temperature sensitivity since fine control of the tunnel temperature is not easily achievable in the larger wind tunnels. In an effort to improve the overall accuracy of the PSP technique, we are currently evaluating some referenced pressure sensitive paints which contain a pressure- independent luminophor in addition to the one which is affected by the surface pressure. The two luminophors are chosen so that their emission wavelengths are somewhat different. Then by taking two 'wind-on' images with either two cameras (with different filters) or one camera with a rotating filter system, the need for 'wind-off' images can be eliminated. The ratio of the two wind-on images accounts for nonuniform lighting and model motion problems (physical movement of the model under aerodynamic loading) are not a concern any more. The paints and data acquisition and reduction software for this type of a PSI system are currently under development and evaluation. Additional information is contained within the original extended abstract.

Bell, J. H.↗

Anisotropic lattice thermal expansion of PbFeBO{sub 4}: A study by X-ray and neutron diffraction, Raman spectroscopy and DFT calculations

Highlights: • Mullite-type PbFeBO{sub 4} shows uni-axial negative coefficient of thermal expansion. • Anisotropic thermal expansion of the metric parameters was modeled using modified Grüneisen approximation. • The model includes harmonic, quasi-harmonic and intrinsic anharmonic contributions to the internal energy. • DFT calculation, temperature- and pressure-dependent Raman spectra help understand the phonon decay and associated anharmonicity. - Abstract: The lattice thermal expansion of mullite-type PbFeBO{sub 4} is presented in this study. The thermal expansion coefficients of the metric parameters were obtained from composite data collected from temperature-dependent neutron and X-ray powder diffraction between 10 K and 700 K. The volume thermal expansion was modeled using extended Grüneisen first-order approximation to the zero-pressure equation of state. The additive frame of the model includes harmonic, quasi-harmonic and intrinsic anharmonic potentials to describe the change of the internal energy as a function of temperature. The unit-cell volume at zero-pressure and 0 K was optimized during the DFT simulations. Harmonic frequencies of the optical Raman modes at the Γ-point of the Brillouin zone at 0 K were also calculated by DFT, which help to assign and crosscheck the experimental frequencies. The low-temperature Raman spectra showed significant anomaly in the antiferromagnetic regions, leading to softening or hardening of some phonons. Selected modes were analyzed using a modified Klemens model. The shift of the frequencies and the broadening of the line-widths helped to understand the anharmonic vibrational behaviors of the PbO{sub 4}, FeO{sub 6} and BO{sub 3} polyhedra as a function of temperature.

36 MATERIALS SCIENCE↗

Mg dopant in Cu{sub 2}SnSe{sub 3}: An n-type former and a promoter of electrical mobility up to 387 cm{sup 2} V{sup −1} s{sup −1}

Mg-doped Cu{sub 2}SnSe{sub 3} bulk materials with the (Cu{sub 2−x}Mg{sub x})SnSe{sub 3} (Mg-x-CTSe) formula at x=0, 0.05, 0.1, 0.15, and 0.2 were prepared at 550 °C for 2 h with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. Defect chemistry was studied by measuring structural and electrical properties of Mg-doped Cu{sub 2}SnSe{sub 3} as a function of dopant concentration. Mg-x-CTSe pellets show p-type at x=0, 0.05 and 0.1 and n-type at x=0.15 and 0.2. The low hole concentration of 3.2×10{sup 17} cm{sup −3} and high mobility of 387 cm{sup 2} V{sup −1} s{sup −1} were obtained for (Cu{sub 2−x}Mg{sub x})SnSe{sub 3} bulks at x=0.1 (5% Mg) as compared to 2.2×10{sup 18} cm{sup −3} and 91 cm{sup 2} V{sup −1} s{sup −1} for the undoped one. The explanation based upon the Mg-to-Cu antisite donor defect for the changes in electrical property was declared. A high Mg content for Mg-x-CTSe at x≥0.1 can lead to the formation of second phases. The study in bulk Mg-x-CTSe has been based upon defect states and is consistent and supported by the data of structural and electrical properties. - Graphical abstract: The effects of extrinsic doping of Mg{sup 2+} on the electrical properties of Cu{sub 2}SnSe{sub 3} bulks. - Highlights: • p-Type Mg-CTSe with n{sub p} of 3.2×10{sup 17} cm{sup −3} and μ{sub p} of 387 cm{sup 2} V{sup −1} s{sup −1} was obtained. • This p-type occurred for 5%Mg-doped CTSe with the (Cu{sub 1.9}Mg{sub 0.1})SnSe{sub 3} formula. • Mg dopant acts as a donor to lower n{sub p} and an accelerator to increase mobility. • High Mg content leads to the p-to-n transitions. • Defect was explored by measuring electrical property and lattice parameter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SharP Unified Memory Allocator: An Intent-Based Memory Allocator for Extreme-Scale Systems

The pre-exascale systems will soon be deployed with a deep, complex memory hierarchy composed of many heterogeneous memories. This presents multiple challenges for users including: how to allocate data objects with locality between memories and devices for the various memories in these systems, which includes DRAM, High-bandwidth Memory (HBM), and non-volatile random access memory (NVRAM), and how to perform these allocations while providing portability for their application. Currently, the user can make use of multiple, disjoint libraries to allocate data objects on these memories. However, it is difficult to obtain locality between memories and devices when using libraries that are unaware of each other. This paper presents the Unified Memory Allocator (UMA) of the SHARed data-structure centric Programming abstraction (SharP) library, which provides a unified interface for memory allocations across DRAM, HBM, and NVRAM and is extensible to support future memory types. In addition, the SharP UMA allows for portability between systems by supporting both explicit and implicit, intent-based memory allocations. To demonstrate the ease of use of the SharP UMA, we have extended both Open MPIand OpenSHMEM-Xto support SharP. We validate this work by evaluating the performance implications and intent-based approach with synthetic benchmarks as well as adaptations of the Graph500 benchmark.

Aderholdt, William↗

Spatially resolved properties of early-type group-dominant galaxies with MUSE: gas content, ionization mechanisms, and metallicity gradients

ABSTRACT With the goal of a thorough investigation of the ionized gas and its origin in early-type group-dominant galaxies, we present archival MUSE data for 18 galaxies from the Complete Local-Volume Groups Sample (CLoGS). These data allowed us to study the spatially resolved warm gas properties, including the morphology of the ionized gas, EW(H α), and kinematics as well as the gas-phase metallicity (12 + log(O/H)) of these systems. In order to distinguish between different ionization mechanisms, we used the emission-line ratios [O iii]/H β and [N ii]/H α in the BPT diagrams and EW(H α). We find that the ionization sources in our sample have variable impacts at different radii; central regions are more influenced by low-luminosity active galactic nuclei, while extended regions of low-ionization nuclear emission-line region-like emission are ionized by other mechanisms with post-asymptotic giant branch stars photoionization likely contributing significantly. We classified our sample into three H α +[N ii] emission morphology types. We calculate the gas-phase metallicity assuming several methods and ionization sources. In general, 12 + log(O/H) decreases with radius from the centre for all galaxies, independently of nebular morphology type, indicating a metallicity gradient in the abundance profiles. Interestingly, the more extended filamentary structures and all extranuclear star-forming regions present shallow metallicity gradients. Within the uncertainties these extended structures can be considered chemically homogeneous. We suggest that group-dominant galaxies in our sample likely acquired their cold gas in the past as a consequence of one or more mechanisms, e.g. gas-clouds or satellite mergers/accretion and/or cooling flows that contribute to the growth of the ionized gas structures.

Lagos, P. (ORCID:0000000223218657)↗

Comparing traditional and Bayesian approaches to ecological meta‐analysis

Abstract Despite the wide application of meta‐analysis in ecology, some of the traditional methods used for meta‐analysis may not perform well given the type of data characteristic of ecological meta‐analyses. We reviewed published meta‐analyses on the ecological impacts of global climate change, evaluating the number of replicates used in the primary studies ( n i ) and the number of studies or records ( k ) that were aggregated to calculate a mean effect size. We used the results of the review in a simulation experiment to assess the performance of conventional frequentist and Bayesian meta‐analysis methods for estimating a mean effect size and its uncertainty interval. Our literature review showed that n i and k were highly variable, distributions were right‐skewed and were generally small (median n i = 5, median k = 44). Our simulations show that the choice of method for calculating uncertainty intervals was critical for obtaining appropriate coverage (close to the nominal value of 0.95). When k was low (<40), 95% coverage was achieved by a confidence interval (CI) based on the t distribution that uses an adjusted standard error (the Hartung–Knapp–Sidik–Jonkman, HKSJ), or by a Bayesian credible interval, whereas bootstrap or z distribution CIs had lower coverage. Despite the importance of the method to calculate the uncertainty interval, 39% of the meta‐analyses reviewed did not report the method used, and of the 61% that did, 94% used a potentially problematic method, which may be a consequence of software defaults. In general, for a simple random‐effects meta‐analysis, the performance of the best frequentist and Bayesian methods was similar for the same combinations of factors ( k and mean replication), though the Bayesian approach had higher than nominal (>95%) coverage for the mean effect when k was very low ( k < 15). Our literature review suggests that many meta‐analyses that used z distribution or bootstrapping CIs may have overestimated the statistical significance of their results when the number of studies was low; more appropriate methods need to be adopted in ecological meta‐analyses.

Pappalardo, Paula↗

Impact of Operating Context on the Use of Structure in Air Traffic Controller Cognitive Processes

This paper investigates the influence of structure on air traffic controllers cognitive processes in the TRACON, En Route, and Oceanic environments. Radar data and voice command analyses were conducted to support hypotheses generated through observations and interviews conducted at the various facilities. Three general types of structure-based abstractions (standard flows, groupings, and critical points) have been identified as being used in each context, though the details of their application varied in accordance with the constraints of the particular operational environment. Projection emerged as a key cognitive process aided by the structure-based abstractions, and there appears to be a significant difference between how time-based versus spatial-based projection is performed by controllers. It is recommended that consideration be given to the value provided by the structure-based abstractions to the controller as well as to maintain consistency between the type (time or spatial) of information support provided to the controller.

Davison, Hayley J.↗

Virtual Machine Language

Virtual Machine Language (VML) is a mission-independent, reusable software system for programming for spacecraft operations. Features of VML include a rich set of data types, named functions, parameters, IF and WHILE control structures, polymorphism, and on-the-fly creation of spacecraft commands from calculated values. Spacecraft functions can be abstracted into named blocks that reside in files aboard the spacecraft. These named blocks accept parameters and execute in a repeatable fashion. The sizes of uplink products are minimized by the ability to call blocks that implement most of the command steps. This block approach also enables some autonomous operations aboard the spacecraft, such as aerobraking, telemetry conditional monitoring, and anomaly response, without developing autonomous flight software. Operators on the ground write blocks and command sequences in a concise, high-level, human-readable programming language (also called VML ). A compiler translates the human-readable blocks and command sequences into binary files (the operations products). The flight portion of VML interprets the uplinked binary files. The ground subsystem of VML also includes an interactive sequence- execution tool hosted on workstations, which runs sequences at several thousand times real-time speed, affords debugging, and generates reports. This tool enables iterative development of blocks and sequences within times of the order of seconds.

Grasso, Christopher↗