Search NASA⌕ Search

SEARCH · Search NASA

Results for “acceptor doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Effects of hydrogen on acceptor activation in ternary nitride semiconductors

Doping control is necessary to unlock the scientific and technological potential of many materials, including ternary II-IV-nitride semiconductors, which are closely related to binary GaN. In particular, ZnSnN 2 has been reported to have degenerate doping density, despite bandgap energies that are well suited for solar energy conversion. Here, we show that annealing Zn-rich Zn 1+x Sn 1-x N 2 grown with added hydrogen reduces its free electron density by orders of magnitude, down to 4 x 10 16 cm -3 . This experimental observation can be explained by hydrogen passivation of acceptors in Zn 1+x Sn 1-x N 2 during growth, lowering the driving force for unintentional donor formation. Lastly, these results indicate that the doping control principles used in GaN can be translated to ZnSnN 2 , suggesting that other strategies used in binary III-Vs can be applied to accelerate the technological development of ternary II-IV-N 2 materials.

14 SOLAR ENERGY↗

Silica Aerogels Doped with Ru(II) Tris 1,l0-Phenanthro1ine)-Electron Acceptor Dyads: Improving the Dynamic Range, Sensitivity and Response Time of Sol-Gel Based Oxygen Sensors

Complexes 1 and 2 were characterized in fluid and frozen solution and as dopants of silica aerogels. The intramolecular quenching efficiency of pendant 4-benzoyl-N-methylpyridinium group (4BzPy) is solvent dependent: emission is quenched completely in acetonitrile but not in alcohols. On the other hand, N-benzyl-N'-methylviologen (BzMeV) quenches the emission in all solvents completely. The differences are traced electrochemically to a stronger solvation effect by the alcohol in the case of 1. In fiozen matrices or absorbed on the surfaces of silica aerogel, both 1 and 2 are photoluminescent. The lack of quenching has been traced to the environmental rigidity. When doped aerogels are cooled to 77K, the emission shifts to the blue and its intensity increases in analogy to what is observed with Ru(II) complexes in media undergoing fluid-to-rigid transition. The photoluminescence of 1 and 2 from the aerogel is quenched by oxygen diffusing through the pores. In the presence of oxygen, aerogels doped with 1 can modulate their emission over a wider dynamic range than aerogels doped with 2, and both are more sensitive than aerogels doped with Ru(II) tris(1,l0- phenanthroline). In contrast to frozen solutions, the luminescent moieties in the bulk of aerogels kept at 77K are still accessible, leading to more sensitive platforms for oxygen sensors than other ambient temperature configurations.

Kevebtusm Bucgikas↗

Point Defects in Pb-, Bi-, and In-Doped CdZnTe Detectors:Deep-Level Transient Spectroscopy (DLTS) Measurements

We studied, by current deep-level transient spectroscopy (I-DLTS), point defects induced in CdZnTe detectors by three dopants: Pb, Bi, and In. Pb-doped CdZnTe detectors have a new acceptor trap at around 0.48 eV. The absence of a V{sub Cd} trap suggests that all Cd vacancies are compensated by Pb interstitials after they form a deep-acceptor complex [[Pb{sub Cd}]{sup +}-V{sub Cd}{sup 2-}]{sup -}. Bi-doped CdZnTe detectors had two distinct traps: a shallow trap at around 36 meV and a deep donor trap at around 0.82 eV. In detectors doped with In, we noted three well-known traps: two acceptor levels at around 0.18 eV (A-centers) and 0.31 eV (V{sub Cd}), and a deep trap at around 1.1 eV.

36 MATERIALS SCIENCE↗

Tunable structural, morphological and optical properties of undoped, Mn, Ni and Ag-doped CuInS 2 thin films prepared by AACVD

The preparation of high-quality copper indium sulphide, CuInS 2 photo-absorber material with tunable properties for efficient, low-cost, thin film solar cells using scalable methods remains a challenge. In order to address this, high quality off-stoichiometric undoped and Mn, Ni and Ag-doped CuInS 2 (CIS) thin films have been deposited onto glass substrates by aerosol-assisted chemical vapour deposition (AACVD) using metal diethyldithiocarbamate precursors at temperatures of 350, 400 and 450 °C. Data from powder X-ray diffraction (p-XRD), Raman spectroscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) suggest a correlation of morphology and composition of tetragonal phase (chalcopyrite and copper-gold-type) sulphur-deficient microcrystalline CIS thin films. For undoped thin films, near-infrared optical absorption and emission with tunable band gap between 1.32 and 1.42 eV are likely associated with donor-acceptor pairs involving deep or shallow electronic states such as sulphur vacancies (V S •• ), indium-copper anti-sites (In Cu •• ) and indium interstitials (In i ••• ) as donors and copper vacancies (V Cu ') as acceptors. Whilst Mn-doped thin films exhibit minimal tunable properties, Ni and Ag-doped films exhibit tunable morphology, composition and near-infrared absorption for small dopant content. Here, though further studies are required to explore the defect chemistry, these results show the utility of AACVD in tuning structural, morphological and optical properties of undoped, Mn, Ni and Ag-doped CIS thin films.

36 MATERIALS SCIENCE↗

Donor doping of corundum (Al x Ga 1- x ) 2 O 3

We report corundum (Al x Ga 1-x ) 2 O 3 alloys have been proposed as a candidate ultrawide-bandgap oxide for a number of applications, but doping is unexplored. We examine the prospects for n-type doping with H, Si, Ge, Sn, Hf, Zr, and Ta in corundum (Al x Ga 1-x ) 2 O 3 alloys using first-principles calculations. All of the dopants are shallow donors in corundum Ga 2 O 3 . In the (Al x Ga 1-x ) 2 O 3 alloy, they transition from shallow to deep donors at Al compositions that are unique to each donor. Si and Hf remain shallow donors up to the highest Al contents in corundum (Al x Ga 1-x ) 2 O 3 alloys and are still shallow even as the (Al x Ga 1-x ) 2 O 3 bandgap exceeds 6.5 eV. Finally, we address the detrimental role of cation vacancies as compensating deep acceptors and suggest that doping in a hydrogen-rich environment under cation-rich conditions can be used to overcome this problem.

36 MATERIALS SCIENCE↗

Energetics and Escape of Interchain-Delocalized Ion Pairs in Nonpolar Media

The electron acceptor F4TCNQ p-dopes aggregates “nanowires” of poly(3-hexylthiophene) in nonpolar solvents but does not dope unaggregated chains. The standard free energy change for the charge transfer to form an ion pair is ΔG° et = -0.21 eV. The dissociation constant to produce free ions in toluene by DC conductivity is K° d = 1 × 10 -8 ± 50% (ΔG° d = 0.48 ± 0.05 eV). This remarkably large K°d, for ions in such a low polarity medium, may reflect interchain delocalization of the hole. The particular characteristics of this material system enables determination of both ΔG° et and ΔG° d , to find the overall free energy change from the two neutral species to completely separated ions in nonpolar media. It is endergonic by +0.27 ± 0.05 eV in contrast to -0.6 eV estimated from reported HOMO LUMO differences, illustrating the challenges that persist in determining such energetics. Steady state microwave conductivity experiments on doped aggregates confirm that holes in the aggregates cannot easily escape their dopant counterion, but at higher dopant concentrations, holes become mobile. These results provide insight into the mechanisms of charge separation involving intermolecularly delocalized charges in nonpolar media, an integral process in organic photovoltaic devices and doped molecular films.

36 MATERIALS SCIENCE↗

Mg dopant in Cu{sub 2}ZnSnSe{sub 4}: An n-type former and a promoter of electrical mobility up to 120 cm{sup 2} V{sup −1} s{sup −1}

Mg-doped Cu{sub 2}ZnSnSe{sub 4} (CZTSe) bulk materials with the (Cu{sub 2−x}Mg{sub x})ZnSnSe{sub 4} formula at x=0, 0.1, 0.2, 0.3, and 0.4 were prepared at 600 °C for 2 h with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. Defect chemistry was studied by measuring structural and electrical properties of Mg-doped CZTSe as a function of dopant concentration. Except at x=0, all Mg-doped CZTSe pellets showed an n-type behavior. The Mg-doped CZTSe pellets showed an n-type behavior. n-Type Mg-CZTSe pellets at x=0.1 showed the highest electrical conductivity of 24.6 S cm{sup −1} and the net hole mobility of 120 cm{sup 2} V{sup −1} s{sup −1}, while they were 11.8 S cm{sup −1} and 36.5 cm{sup 2} V{sup −1} s{sup −1} for the undoped p-type CZTSe. Mg dopant is a strong promoter of electrical mobility. Mg dopant behaves as a donor defect in CZTSe at a 5% doping content, but is also used as an acceptor at a high content above 5%. Mg doping has further developed CZTSe into a promising semiconductor. - Graphical abstract: The effects of extrinsic doping of Mg{sup 2+} on the electrical properties of Cu{sub 2}ZnSnSe{sub 4} bulks. - Highlights: • (Cu{sub 2−x}Mg{sub x})ZnSnSe{sub 4} bulks were fabricated by liquid-phase sintering at 600 °C. • All Mg-x-CZTSe pellets except at x=0 exhibited n-type conductivity. • Electrical properties of CZTSe pellets changed with the Cu and Mg ratios. • Mg{sup 2+} goes to the Cu{sup 1+} site to form the Mg{sub Cu}{sup 1+} donor defect for the n-type CZTSe. • n-Type Mg-0.1-CZTSe bulk with 5% Mg showed the highest mobility of 120 cm{sup 2} V{sup −1} s{sup −1}.

36 MATERIALS SCIENCE↗

A Model for Atomic Precision p-Type Doping with Diborane on Si(100)-2×1

Diborane (B 2 H 6 ) is a promising molecular precursor for atomic precision p-type doping of silicon that has recently been experimentally demonstrated. In this study, we use density functional theory (DFT) calculations to determine the reaction pathway for diborane dissociating into a species that will incorporate as electrically active substitutional boron after adsorbing onto the Si(100)-2×1 surface. Our calculations indicate that diborane must overcome an energy barrier to adsorb, explaining the experimentally observed low sticking coefficient (<1 × 10 –4 at room temperature) and suggesting that heating can be used to increase the adsorption rate. Upon sticking, diborane has an ≈50% chance of splitting into two BH 3 fragments versus merely losing hydrogen to form a dimer such as B 2 H 4 . As boron dimers are likely electrically inactive, whether this latter reaction occurs is shown to be predictive of the incorporation rate. The dissociation process proceeds with significant energy barriers, necessitating the use of high temperatures for incorporation. Using the barriers calculated from DFT, we parameterize a Kinetic Monte Carlo model that predicts the incorporation statistics of boron as a function of the initial depassivation geometry, dose, and anneal temperature. Our results suggest that the dimer nature of diborane inherently limits its doping density as an acceptor precursor and furthermore that heating the boron dimers to split before exposure to silicon can lead to poor selectivity on hydrogen and halogen resists. This suggests that, while diborane works as an atomic precision acceptor precursor, other non-dimerized acceptor precursors may lead to higher incorporation rates at lower temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydroporphyrin-Doped Near-Infrared-Emitting Polymer Dots for Cellular Fluorescence Imaging

We report Near-infrared (NIR) fluorescent semiconductor polymer dots (Pdots) have shown great potential for fluorescence imaging due to their exceptional chemical and photophysical properties. This paper describes the synthesis of NIR emitting Pdots with great control and tunability of emission peak wavelength. The Pdots were prepared by doping poly [(9,9-dioctylfluorenyl-2,7-diyl)-altco-(1,4-benzo-(2,1’,3)-thiadiazole)] (PFBT), a semiconducting polymer commonly used as a host polymer in luminescent Pdots, with a series of chlorins and bacteriochlorins with varying functional groups. Chlorins and bacteriochlorins are ideal dopants due to their high hydrophobicity, which precludes their use as molecular probes in aqueous biological media but on the other hand prevents their leakage when doped into Pdots. Additionally, chlorins and bacteriochlorins have narrow deep-red to NIR emission bands and the wide array of synthetic modifications available for modifying their molecular structure enables tuning their emission predictably and systematically. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements show the chlorin and bacteriochlorin-doped Pdots to be nearly spherical with an average diameter of 46±12 nm. Efficient energy transfer between PFBT and the doped chlorins or bacteriochlorins decreases the PFBT donor emission to near baseline level and increases the emission of the doped dyes that serve as acceptors. The chlorin and bacteriochlorindoped Pdots show narrow emission bands ranging from 640 nm to 820 nm depending on the doped dye. The paper demonstrates the utility of the systematic chlorin and bacteriochlorin synthesis approach by preparing Pdots of varying emission peak wavelength, utilizing them to visualize multiple targets using wide field fluorescence microscopy, binding them to secondary antibodies, and determining the binding of secondary antibody-conjugated Pdots to primary antibody-labeled receptors in plant cells. Additionally, the chlorin and bacteriochlorin doped Pdots show a blinking behavior that could enable their use in super resolution imaging methods like STORM.

13C-NMR↗

First principles band structure of interacting phosphorus and boron/aluminum δ -doped layers in silicon

Silicon can be heavily doped with phosphorus in a single atomic layer (a δ layer), significantly altering the electronic structure of the conduction bands within the material. Recent progress has also made it possible to further dope silicon with acceptor-based δ layers using either boron or aluminum, making it feasible to create devices with interacting δ layers with opposite polarity. Using density functional theory, we calculate the electronic structure of a phosphorus-based δ layer interacting with a boron or aluminum δ layer, varying the distances between the δ layers. At separations 1 nm and smaller, the dopant potentials overlap and largely cancel each other out, leading to an electronic structure closely mimicking intrinsic silicon. At separations greater than 1 nm, the two δ layers behave independently of one another, with an equivalent electronic structure to a p–n diode with an intrinsic layer taking the place of the depletion region. One mechanism for charge transfer between δ layers at larger distances could be tunneling, where we see a tunneling probability exceeding what would be seen for a standard silicon 1.1 eV triangular barrier, indicating that the interaction between delta layers may enhance tunneling compared to a traditional junction.

delta layers↗

Piezoresistance and hole transport in beryllium-doped silicon.

The resistivity and piezoresistance of p-type silicon doped with beryllium have been studied as a function of temperature, crystal orientation, and beryllium doping concentration. It is shown that the temperature coefficient of resistance can be varied and reduced to zero near room temperature by varying the beryllium doping level. Similarly, the magnitude of the piezoresistance gauge factor for beryllium-doped silicon is slightly larger than for silicon doped with a shallow acceptor impurity such as boron, while the temperature coefficient of piezoresistance is about the same for material containing these two dopants. These results are discussed in terms of a model for the piezoresistance of compensated p-type silicon.

Littlejohn, M. A.↗

Low temperature coefficient of resistance and high gage factor in beryllium-doped silicon

The gage factor and resistivity of p-type silicon doped with beryllium was studied as a function of temperature, crystal orientation, and beryllium doping concentration. It was shown that the temperature coefficient of resistance can be varied and reduced to zero near room temperature by varying the beryllium doping level. Similarly, the magnitude of the piezoresistance gage factor for beryllium-doped silicon is slightly larger than for silicon doped with a shallow acceptor impurity such as boron, whereas the temperature coefficient of piezoresistance is about the same for material containing these two dopants. These results are discussed in terms of a model for the piezoresistance of compensated p-type silicon.

Robertson, J. B.↗

Photo Hall-effect characterization of closely compensated Ge:Be

The temperature dependence of the free-carrier concentration in germanium doped with the double acceptor Be has been investigated using the photo Hall-effect technique and found to be strongly temperature dependent when the residual shallow impurities are closely compensated. Close compensation of shallow levels was achieved by controlling the concentration of a beryllium-hydrogen acceptor complex A(Be,H) which is present in crystals grown under a H2 atmosphere. This complex can be removed with high-temperature annealing. An increase of up to two orders of magnitude in free-carrier lifetime as a function of temperature is found to occur between 5 and 11 K in closely compensated material due to the population inversion of ionized centers created by optical pumping.

Germer, T. A.↗

Improved Starting Materials for Back-Illuminated Imagers

An improved type of starting materials for the fabrication of silicon-based imaging integrated circuits that include back-illuminated photodetectors has been conceived, and a process for making these starting materials is undergoing development. These materials are intended to enable reductions in dark currents and increases in quantum efficiencies, relative to those of comparable imagers made from prior silicon-on-insulator (SOI) starting materials. Some background information is prerequisite to a meaningful description of the improved starting materials and process. A prior SOI starting material, depicted in the upper part the figure, includes: a) A device layer on the front side, typically between 2 and 20 m thick, made of p-doped silicon (that is, silicon lightly doped with an electron acceptor, which is typically boron); b) A buried oxide (BOX) layer (that is, a buried layer of oxidized silicon) between 0.2 and 0.5 m thick; and c) A silicon handle layer (also known as a handle wafer) on the back side, between about 600 and 650 m thick. After fabrication of the imager circuitry in and on the device layer, the handle wafer is etched away, the BOX layer acting as an etch stop. In subsequent operation of the imager, light enters from the back, through the BOX layer. The advantages of back illumination over front illumination have been discussed in prior NASA Tech Briefs articles.

Pain, Bedabrata↗

Tellurium precipitates in (Cd,Mn)Te:V crystals: Effects of annealing

We suggest that (Cd,Mn)Te is a suitable material for fabricating gamma- and X-ray detectors. Our investigations, reported here, are focused on producing high-quality (Cd,Mn)Te crystals with high resistivity (10{sup 9} {Omega}-cm) by the Bridgman method. As-grown, undoped (Cd,Mn)Te crystals are typically p-type, signifying that they contain excess Cd vacancies (acting as acceptors), accumulated during growth. Doping with vanadium atoms, which function as compensating centers, results in a semi-insulating material (Cd,Mn)Te:V. Properly annealing the platelets in cadmium vapors at uniform temperature reduces the number of cadmium vacancies, and lowers the level of the vanadium doping required for compensation. We found that annealing in cadmium vapors not only decreases the concentration of the native cadmium vacancies but also improves the crystal's quality. Infrared observations of the interior of the samples show that annealing in a temperature gradient perpendicular to the platelet has an additional effect, viz., the tellurium precipitates migrate towards the side where the temperature is higher. We demonstrate, with IR pictures of monocrystalline (Cd,Mn)Te:V platelets cut parallel to the (111) crystal planes, the influence on tellurium inclusions and precipitates of various conditions of annealing in cadmium vapors.

36 MATERIALS SCIENCE↗

Hall effect study of electron irradiated Si(Li)

Measurement of the Hall coefficient as a function of temperature between 15 and 300 K allows the separate determination of donor and acceptor concentrations in silicon samples which were irradiated at 240 K by 1-MeV electrons and then thermally annealed at 300 K. In both lithium- and phosphorus-doped silicon irradiation increased the acceptor concentration and decreased the donor concentration due to the formation of vacancy donor pairs. Annealing did not change either concentration in phosphorus-doped silicon and caused both concentrations to decrease in silicon doped with moderate amounts of lithium. In addition to this, in both lithium- and phosphorus-doped silicon the concentration and energy level of the A center were measured at each point in the sample's history. This experiment was limited to float-zoned silicon doped with less than 6 x 10 to the 14th power donors per cu cm.

Stannard, J.↗