Results for “activity coefficient model” — Page 8

NASA NTRS2008

Relativistic Electrons at Geostationary Orbit: Modeling Results

We developed a new prediction model for forecasting relativistic (greater than 2MeV) electrons, which provides a VERY HIGH correlation between predicted and actually measured electron fluxes at geostationary orbit. This model implies the multi-step particle acceleration and is based on numerical integrating two linked continuity equations for primarily accelerated particles and relativistic electrons. The model includes a source and losses, and used solar wind data as only input parameters. We used the coupling function which is a best-fit combination of solar wind/interplanetary magnetic field parameters, responsible for the generation of geomagnetic activity, as a source. The loss function was derived from experimental data. We tested the model for four year period 2004-2007. The correlation coefficient between predicted and actual values of the electron fluxes for whole four year period as well as for each of these years is stable and incredibly high (about 0.9). The high and stable correlation between the computed and actual electron fluxes shows that the reliable forecasting these electrons at geostationary orbit is possible.

Khazanov, George V.↗

NASA NTRS2008

Prediction Model for Relativistic Electrons at Geostationary Orbit

We developed a new prediction model for forecasting relativistic (greater than 2MeV) electrons, which provides a VERY HIGH correlation between predicted and actually measured electron fluxes at geostationary orbit. This model implies the multi-step particle acceleration and is based on numerical integrating two linked continuity equations for primarily accelerated particles and relativistic electrons. The model includes a source and losses, and used solar wind data as only input parameters. We used the coupling function which is a best-fit combination of solar wind/interplanetary magnetic field parameters, responsible for the generation of geomagnetic activity, as a source. The loss function was derived from experimental data. We tested the model for four year period 2004-2007. The correlation coefficient between predicted and actual values of the electron fluxes for whole four year period as well as for each of these years is stable and incredibly high (about 0.9). The high and stable correlation between the computed and actual electron fluxes shows that the reliable forecasting these electrons at geostationary orbit is possible.

Khazanov, George V.↗

NASA NTRS2008

Active Flow Control at Low Reynolds Numbers on a NACA 0015 Airfoil

Results from a low Reynolds number wind tunnel experiment on a NACA 0015 airfoil with a 30% chord trailing edge flap tested at deflection angles of 0, 20, and 40 are presented and discussed. Zero net mass flux periodic excitation was applied at the ap shoulder to control flow separation for flap deflections larger than 0. The primary objective of the experiment was to compare force and moment data obtained from integrating surface pressures to data obtained from a 5-component strain-gage balance in preparation for additional three-dimensional testing of the model. To achieve this objective, active flow control is applied at an angle of attack of 6 where published results indicate that oscillatory momentum coefficients exceeding 1% are required to delay separation. Periodic excitation with an oscillatory momentum coefficient of 1.5% and a reduced frequency of 0.71 caused a significant delay of separation on the airfoil with a flap deflection of 20. Higher momentum coefficients at the same reduced frequency were required to achieve a similar level of flow attachment on the airfoil with a flap deflection of 40. There was a favorable comparison between the balance and integrated pressure force and moment results.

Melton, LaTunia Pack↗

DOE OSTI2024

Particle control via cryopumping and its impact on the edge plasma profiles of Alcator C-Mod

At the high n e proposed for high-field fusion reactors, it is uncertain whether ionization, as opposed to plasma transport, will be most influential in determining n e at the pedestal and separatrix. A database of Alcator C-Mod discharges is analyzed to evaluate the impact of source modification via cryopumping. The database contains similarly-shaped H-modes at fixed I P = 0.8 MA and B t = 5.4 T, spanning a large range in P net and ionization. Measurements from an edge Thomson scattering system are combined with those from a midplane-viewing Ly α camera to evaluate changes to n e and T e in response to changes in ionization rates, S ion ∙ $n^{sep}_e$ and $T^{ped}_e$ are found to be most sensitive to changes to $S^{sep}_{ion}$, as opposed to $n^{ped}_e$ and $T^{sep}_e$. Dimensionless quantities, namely α MHD and v*, are found to regulate attainable pedestal values. Select discharges at different values of P net and in different pumping configurations are analyzed further using SOLPS-ITER. It is determined that changes to plasma transport coefficients are required to self-consistently model both plasma and neutral edge dynamics. Pumping is found to modify the poloidal distribution of atomic neutral density, n 0 , along the separatrix, increasing n 0 at the active X-point. Opaqueness to neutrals from high n e in the divertor is found to play a role in mediating neutral penetration lengths and hence, the poloidal distribution of neutrals along the separatrix. Pumped discharges thus require a larger particle diffusion coefficient than that inferred purely from 1D experimental profiles at the outer midplane.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NASA NTRS1993

Synergism of active and passive microwave data for estimating bare surface soil moisture

Active and passive microwave sensors were applied effectively to the problem of estimating the surface soil moisture in a variety of environmental conditions. Research to date has shown that both types of sensors are also sensitive to the surface roughness and the vegetation cover. In estimating the soil moisture, the effect of the vegetation and roughness are often corrected either by acquiring multi-configuration (frequency and polarization) data or by adjusting the surface parameters in order to match the model predictions to the measured data. Due to the limitations on multi-configuration spaceborne data and the lack of a priori knowledge of the surface characteristics for parameter adjustments, it was suggested that the synergistic use of the sensors may improve the estimation of the soil moisture over the extreme range of naturally occurring soil and vegetation conditions. To investigate this problem, the backscattering and emission from a bare soil surface using the classical rough surface scattering theory were modeled. The model combines the small perturbation and the Kirchhoff approximations in conjunction with the Peak formulation to cover a wide range of surface roughness parameters with respect to frequency for both active and passive measurements. In this approach, the same analytical method was used to calculate the backscattering and emissivity. Therefore, the active and passive simulations can be combined at various polarizations and frequencies in order to estimate the soil moisture more actively. As a result, it is shown that (1) the emissivity is less dependent on the surface correlation length, (2) the ratio of the backscattering coefficient (HH) over the surface reflectivity (H) is almost independent of the soil moisture for a wide range of surface roughness, and (3) this ratio can be approximated as a linear function of the surface rms height. The results were compared with the data obtained by a multi-frequency radiometer-scatterometer system working at frequencies between 3.0 GHz to 11.0 GHz. The data were acquired over bare soil surfaces with moisture variations due to freezing and thawing and roughness changes due to rain and erosion. The model predictions are shown to be in reasonable agreement with the data. In addition, it was shown that the same ratio when calculated from the data shows almost no dependence on the soil moisture. Finally, a simple technique which combines the backscattering coefficient at HH polarization (active sensing) with the emissivity at H polarization (passive sensing) is suggested for retrieving the soil moisture from bare soil surfaces.

Saatchi, Sasan S.↗

NASA NTRSDate not supplied

Developing the CRTM Active Sensor Module

Active sensors provide vertically resolved atmospheric and cloud information, however the assimilation of such observations into NWP models has been limited for several reasons including lack of reliable forward model. We present the development of CRTM active sensor module including its adjoint and tangent linear by taking advantage of current CRTM modules for calculating atmospheric transmittance and cloud absorption and scattering. Current CRTM cloud coefficients lack cloud backscattering information, thus we have implemented a new cloud scattering database generated using the discrete dipole technique that include backscattering coefficients. The radar simulator is currently being tested within the JEDI/GEOS data assimilation framework to facilitate the assimilation of radar measurements such as CloudSat CPR and GPM DPR into the NASA GEOS model.

CRTM↗

DOE OSTI2025

Software Validation Work With The ZPPR-15 Data

The analysis activities for fast reactors involve using many different pieces of software that are relied upon for their predictive capabilities. For this software to be considered reliable, documented proof that the predictions of the software are accurate is required. In this manuscript, the validation work that covers some of the Argonne software used in fast reactor design activities is discussed and displayed. This validation work includes neutron and gamma flux distributions, reaction rate distributions, and reactivity worth. In an ideal world, a reactor development program would have access to a comprehensive set of experimental facilities to help inform the design aspects of the reactor itself. While thermal-hydraulics experiments, and to a limited degree mechanical experiments, can be carried out today for validation needs, neutronics related experimental facilities are rather impractical because of the lack of experimental facilities. Given the desired time table for construction of new reactors, the reconstitution or creation of new neutronic experimental facilities is untenable and thus those reactor development programs must rely upon any available experimental measurements that are qualitatively similar to the design. While a methodology has been proposed to assess the similarity between the past experimental measurements and the reactor itself, that aspect is beyond the scope of this manuscript. In this manuscript, the focus is entirely placed on the analysis results for a series of experiments carried out at the ZPPR facility in Idaho in the mid-1980s. In this regard, this manuscript only shows the validation of the stated neutronics software for specific loadings of the ZPPR reactor. Because of the fuel form, its proposed enrichment, and the material content of the reactor core, the ZPPR-15 experiments were identified as potential validation data for the reactor. The ZPPR-15 experiments were intended as mockups of a 330 MWe Integral Fast Reactor program which was a follow on program to the Clinch River Breeder Reactor. In the ZPPR-15 series of experiments, measurements of the neutron spectrum, control rod worth, sodium void worth, foil reaction rate distributions, Doppler worth of heated samples, gamma dose, and axial expansion worth were all carried out and published. In many cases, these reactivity coefficients are good candidates to validate the reactivity coefficient calculation scheme used by the analysis software and included in the safety analysis activities of fast reactor development projects today. This manuscript discusses the modeling methodology and accuracy of the calculated experimental results using the LANL software MCNP and the ANL software package ARC (Argonne Reactor Codes). As will be shown, for many of the experimental measurements, the two software packages are found to be good predictive analysis tools for those experiments. In other cases, problems with the analysis methodology or underlying cross section data are exposed which indicates where predictive analysis is not as reliable. Finally, in some of the measurements the conclusion is reached that the experimental measurement cannot be reproduced with the analysis software as it is simply too difficult.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

Software Validation Work With The ZPPR-15 Data

The analysis activities for fast reactors involve using many different pieces of software that are relied upon for their predictive capabilities. For this software to be considered reliable, documented proof that the predictions of the software are accurate is required. In this manuscript, the validation work that covers some of the Argonne software used in fast reactor design activities is discussed and displayed. This validation work includes neutron and gamma flux distributions, reaction rate distributions, and reactivity worth. In an ideal world, a reactor development program would have access to a comprehensive set of experimental facilities to help inform the design aspects of the reactor itself. While thermal-hydraulics experiments, and to a limited degree mechanical experiments, can be carried out today for validation needs, neutronics related experimental facilities are rather impractical because of the lack of experimental facilities. Given the desired time table for construction of new reactors, the reconstitution or creation of new neutronic experimental facilities is untenable and thus those reactor development programs must rely upon any available experimental measurements that are qualitatively similar to the design. While a methodology has been proposed to assess the similarity between the past experimental measurements and the reactor itself, that aspect is beyond the scope of this manuscript. In this manuscript, the focus is entirely placed on the analysis results for a series of experiments carried out at the ZPPR facility in Idaho in the mid-1980s. In this regard, this manuscript only shows the validation of the stated neutronics software for specific loadings of the ZPPR reactor. Because of the fuel form, its proposed enrichment, and the material content of the reactor core, the ZPPR-15 experiments were identified as potential validation data for the reactor. The ZPPR-15 experiments were intended as mockups of a 330 MWe Integral Fast Reactor program which was a follow on program to the Clinch River Breeder Reactor. In the ZPPR-15 series of experiments, measurements of the neutron spectrum, control rod worth, sodium void worth, foil reaction rate distributions, Doppler worth of heated samples, gamma dose, and axial expansion worth were all carried out and published. In many cases, these reactivity coefficients are good candidates to validate the reactivity coefficient calculation scheme used by the analysis software and included in the safety analysis activities of fast reactor development projects today. This manuscript discusses the modeling methodology and accuracy of the calculated experimental results using the LANL software MCNP and the ANL software package ARC (Argonne Reactor Codes). As will be shown, for many of the experimental measurements, the two software packages are found to be good predictive analysis tools for those experiments. In other cases, problems with the analysis methodology or underlying cross section data are exposed which indicates where predictive analysis is not as reliable. Finally, in some of the measurements the conclusion is reached that the experimental measurement cannot be reproduced with the analysis software as it is simply too difficult.

Aliberti, Gerardo↗

NASA NTRS1981

Design for active and passive flutter suppression and gust alleviation

Analytical design techniques for active and passive control of aeroelastic systems are based on a rational approximation of the unsteady aerodynamic loads in the entire Laplace domain, which yields matrix equations of motion with constant coefficients. Some existing schemes are reviewed, the matrix Pade approximant is modified, and a technique which yields a minimal number of augmented states for a desired accuracy is presented. The state-space aeroelastic model is used to design an active control system for simultaneous flutter suppression and gust alleviation. The design target is for a continuous controller which transfers some measurements taken on the vehicle to a control command applied to a control surface. Structural modifications are formulated in a way which enables the treatment of passive flutter suppression system with the same procedures by which active control systems are designed.

Karpel, M.↗

DOE OSTI2021

Development of a Deep Learning Model for Predicting the Drag Coefficients of Spherical and Non-Spherical Particles,

There is yet to be a well-established drag model for non-spherical particles required in a particle-laden flow that could cover a wide range of sphericities. This talk will explore the development of a general drag model for non-spherical particles by applying deep learning using available experimental data available in the literature. The integration of several raw experimental measurements from different sources and research directions allows the training of robust Artificial Intelligence and Machine Learning (ML) models. Neural networks are an ML approach inspired by the inner biological workings of the brain. This work aims to develop a Deep Neural Network (DNN) that predicts drag coefficient values with the ability to adapt appropriately to unseen data. Given the limited number of data points available and the variance found within the data collected from various sources, challenges may arise when looking to train the model. Our study tests and implements various model regularization techniques and assesses different loss and activation functions for the proposed DNN. The proposed model considers a broader range of features other than sphericity and Reynold number. These features include density ratio, solid volume fraction, lengthwise and crosswise sphericity, and more. Furthermore, we present the features that play a significant role in predicting different drag coefficients through feature importance. Within the investigated parameter ranges in this study, the following conclusions can be achieved and summarized below: • An improved drag coefficient model can be developed by considering more features such as, aspect ratio, lengthwise sphericity, crosswise sphericity, and density ratio. • DNN model can predict better results compared to traditional methods using MAE metric. • The proposed model addresses data challenges such as limited data and extreme data points through expanded feature-set and regularization. • Three major features that mostly affect the drag coefficient were identified from a feature importance analysis.

Presa-Reyes, Maria↗

NASA NTRS2021

Comparison of soil dielectric mixing models for Soil Moisture Retrieval using SMAP Brightness Temperature over croplands in India

The accurate estimation of soil moisture (SM) using microwave remote sensing depends mostly on careful selection of retrieval parameters among which the soil dielectric mixing model is the important one. These models are often categorized into empirical, semi-empirical or volumetric based on their methodologies and input data requirements. To study in detail, the comparative performance of four dielectric mixing models -- Wang & Schmugge model, Hallikainen model, Dobson model and Mironov model were used with Soil Moisture Active Passive (SMAP) L-band brightness temperature and Single Channel Algorithm for SM retrieval over agricultural landscapes in India. The highest performance statistics combination in terms of Root Mean Square Error (RMSE), correlation coefficient (R^(2)) and percentage bias (PBIAS) against the concurrent in-situ SM measurements were calculated at the selected validation sites. The overall results indicate that the best performance was given by the Mironov model (RMSE = 0.07 cu. m/cu. m), followed by Wang & Schmugge model (RMSE = 0.08 cu. m3/cu. m), Hallikainen model (RMSE = 0.09 cu. m/cu. m), Dobson model (RMSE = 0.10 cu. m/cu. m) and original SMAP radiometer SM (RMSE = 0.12 cu. m/cu. m). Findings of this study provides important insights into application and performance of dielectric mixing models in mapping surface SM variations. This study also underlines the pivotal role of local conditions for SM retrieval which should be carefully included in the algorithms.

Swati Suman↗

DOE OSTI2021

Characterization of the indoor near-field aerosol transmission in a model commercial office building

To evaluate the exposure potential of infectious aerosols containing SARS-CoV-2 in an office building setting, synthetic test aerosols were used to experimental study airborne particle transmission in a multizone small office test building at the Oak Ridge National Laboratory. Nine measurement points in a single zone using active aerosol impactors report that the coefficient of variation of the time-averaged concentration is <10% in two campaigns and < 15% in one campaign, so a nearly well-mixed condition was noted. To understand the effect of HVAC system operation on the dynamic concentration of aerosols in office spaces, an aerosol transport model that includes factors such as outside air (OA) ratio, filtration, return air fraction, transport loss in air ducts, and particle deposition has been developed. The results of model fitting demonstrate strong agreement with experimental data. Overall, our investigation finds the return air fraction effects outweigh other mechanisms for the aerosol recirculation in this study, and the impact of air change rate (ACR) is more important than the small particle deposition for aerosol removal. Because ACR dominates the aerosol transport, the full model can be simplified to just one factor, the ACR, while maintaining an acceptable representation of the experimental data.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

Flux Hypothesis for Odd Transport Phenomena

Onsager's regression hypothesis makes a fundamental connection between macroscopic transport phenomena and the average relaxation of spontaneous microscopic fluctuations. This relaxation, however, is agnostic to odd transport phenomena, in which fluxes run orthogonal to the gradients driving them. To account for odd transport, we generalize the regression hypothesis, postulating that macroscopic linear constitutive laws are, on average, obeyed by microscopic fluctuations, whether they contribute to relaxation or not. From this "flux hypothesis," Green-Kubo and reciprocal relations follow, elucidating the separate roles of broken time-reversal and parity symmetries underlying various odd transport coefficients. As an application, we derive and verify the Green-Kubo relation for odd collective diffusion in chiral active matter, first in an analytically tractable model and subsequently through molecular dynamics simulations of concentrated active spinners.

Hargus, Cory↗

DOE OSTI2021

Single-Molecule Kinetics of Styrene Hydrogenation on Silica-Supported Vanadium: The Role of Disorder for Single-Atom Catalysts

We report a theoretical approach for the study of supported atom catalysis is developed based on recent advances in the study of single-molecule kinetics. This view is particularly useful in exhibiting the role of disorder in single-atom and single-site catalysts on amorphous supports. The distribution of passage times (or waiting times) through a complex catalytic network originating from a set of coupled active sites is described by a probability distribution function (PDF), f(t), that reflects the local environment of the reaction center. An efficient algorithm is developed based on the linear algebra of the Markov transition matrix that produces f(t) or its moments. The kinetics of the hydrogenation reaction of styrene on an organovanadium(III) catalyst supported on amorphous silica is studied. A kinetic model consisting of three intertwined catalytic cycles emanating from three chemically distinct active sites is proposed to describe the chemistry. Density functional theory (DFT) calculations are employed to determine the free energy barriers of the reactions, which are used to construct the rate coefficient matrix. The disorder induced by the amorphous support material is divided into a low-dimensional short-range component reflecting the covalent structures near the reaction center and a weaker long-range component modeling the bulk randomness. The results are computed and analyzed for a wide range of concentration values and disorder scenarios. The unusual structure in the f(t) PDF is found to occur for certain cases that reveal the contribution of multiple catalytic pathways acting in concert.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Apparent Increasing Lithium Diffusion Coefficient with Applied Current in Graphite

In this study, we assert that the apparent lithium diffusion coefficient in graphite active particles in the negative electrodes of lithium-ion cells increases appreciably with the intercalation rate. This assertion is based on an electrochemical model analysis of a wide range of electrochemical micro-reference electrode full cell studies on a coated natural graphite and other literature results. Although the mechanism for this increase is a subject of further investigation, the results of our study suggest that the lithium transport in the graphite does not limit the maximum attainable charging rate in typical lithium-ion cells for electric vehicles.

25 ENERGY STORAGE↗

NASA NTRS1996

Experimental Optimization Methods for Multi-Element Airfoils

A modern three element airfoil model with a remotely activated flap was used to investigate optimum flap testing position using an automated optimization algorithm in wind tunnel tests. Detailed results for lift coefficient versus flap vertical and horizontal position are presented for two angles of attack: 8 and 14 degrees. An on-line first order optimizer is demonstrated which automatically seeks the optimum lift as a function of flap position. Future work with off-line optimization techniques is introduced and aerodynamic hysteresis effects due to flap movement with flow on are discussed.

Landman, Drew↗

NASA NTRS2005

Dependence of Ru2O3 Activity on Composition of Silicate Melts: Using Statistical Correlations to Infer Thermodynamic Behavior in the Melt

Understanding variations in activity with composition is an essential step in improving prediction of partition coefficients during magma evolution. Variations in activity with composition are complex and do not generally exhibit ideal behavior relative to a traditional melt-component set. Although deviations from component ideality can be modeled numerically by simply fitting to compositional variables (such as in a regular or subregular solution model), such models have not been particularly successful for describing variations in trace component activities. A better approach might be to try to identify components that do a better job of describing the behavior of the species in the melt. Electrochemical Measurement of Ru2O3 activities: Electrodes were inserted into silicate melt beads of various compositions (Table 1) suspended on Ptwire loops in a 1-atm gas mixing furnace. An electrical potential was imposed between the electrodes, the imposed potential increasing along a step ramp with a pulse imposed on each step (Fig. 1). Current flows between electrodes when electroactive species in the melt are oxidized or reduced at the electrodes. The resulting current was measured at the top and bottom of the voltage pulse, and the difference (the differential current) was plotted against potential. The peak of the resulting curve is related to the activity coefficient for the particular electroactive species (Ru2O3) in the melt [1, 2, 3]. A significant part of the nonideal contribution to activity is due not to intrinsic properties of the component in the melt, but to our ignorance about the state and mixing properties of the component in the melt.

Colson, R. O.↗

DOE OSTI2021

A two-dimensional analytical unit cell model for redox flow battery evaluation and optimization

Cell performance optimization is important for improving the overall system efficiency of a redox flow battery. To gain better insights into key controlling factors of system efficiency, this work first proposed a theoretical model for a unit flow battery cell by extending a two-dimensional analytic model to a full battery cell. Such a model is then used for cell performance optimization after validating it with experimental and numerical modeling data. With the model results, the activation, equilibrium, and pump energy losses are identified as the dominant sources of battery energy losses. Further, a guideline for reducing these sources is also proposed. Following the guideline, the mass transport coefficient is shown as a key control factor of the equilibrium energy loss and Coulombic efficiency (CE). Approaches are then proposed to improve CE and the overall system efficiency. The mass transport is also revealed as the mechanism of pump rate optimization where an optimal pump rate significantly reduces the equilibrium energy loss. With both low equilibrium and pump energy losses, an optimal electrode porosity or specific area design can further improve a battery's system efficiency based on an optimal porosity predicted by the present model. The model also demonstrates distinct behaviors and overestimation in the system efficiency when reduced to a zero-dimensional model with neglected mass transport resistance. With the new model, the guideline, and new insights, this work provides a reliable and efficient tool for the evaluation and optimization of redox flow battery design in practical applications.

25 ENERGY STORAGE↗