Search NASA⌕ Search

SEARCH · Search NASA

Results for “aerogel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Benzimidazole Based Aerogel Materials

The present invention provides aerogel materials based on imidazoles and polyimidazoles. The polyimidazole based aerogel materials can be thermally stable up to 500 C or more, and can be carbonized to produce a carbon aerogel having a char yield of 60% or more, specifically 70% or more. The present invention also provides methods of producing polyimidazole based aerogel materials by reacting at least one monomer in a suitable solvent to form a polybenzimidazole gel precursor solution, casting the polybenzimidazole gel precursor solution into a fiber reinforcement phase, allowing the at least one gel precursor in the precursor solution to transition into a gel material, and drying the gel materials to remove at least a portion of the solvent, to obtain an polybenzimidazole-based aerogel material.

Rhine, Wendell E.↗
NASA NTRS2019

The 3D Printing of Polyimide Aerogels

Polyimide aerogels are a nanoporous material made by extracting the liquid portion of a wet gel and replacing it with air, while still maintaining the porous solid internal architecture. This results in a material with extremely low densities, low thermal conductivities, high internal surfaces areas, and low dielectric constants. Currently, complex aerogel forms are not possible, since they require molds in order to be shaped. To overcome this challenge, we are attempting to use various additive manufacturing techniques to produce complex architectures. Three different approaches are being studied to accomplish this. One is to print using a viscous wet gel and have the structure solidify at the end of the print, another is to use a mixing tip, where a less viscous gel and the final chemical that causes gelation will be mixed as it is printing, allowing it to gel layer by layer, and the third is to use a UV curable aerogel with a UV light following behind to solidify the gel as it prints. To have these approaches be successful, the printing parameters and the aerogel's chemical formulation need to be optimized. The more harmonious these two factors can be made, the more defined and complex the resulting structure can be. Preliminary results show that 3D printing polyimide aerogels are a viable option, but further optimization must occur for reliable printing.

Nosel, Theresa↗
NASA NTRS2019

Increased Flexibility in Polyimide Aerogel Substrates for Conformal, Lightweight Antennas

Polyimide aerogels are desirable for many aerospace applications due to their high porosity, low density, low thermal conductivity, and superior mechanical properties. They have also been demonstrated as lightweight substrates for antennas since they possess very low dielectric constants, approaching one as density decreases. Increasing the flexibility of the aerogel would allow them to be used as conformal antennas for use on aerospace vehicles, leading to significant space and weight savings. In this research, we demonstrate that the flexibility can be increased depending on the polyimide oligomer backbone structures. We have substituted up to 75 mol % of the aromatic diamines typically used in polyimide aerogels with 1, 3-bis (4-aminophenoxy)-2, 2-dimethylpropane (BAPN). Twenty different formulations of polyimide aerogels were synthesized from 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA) and a combination of BAPN and 2,2'-dimethylbenxidine (DMBZ) and cross-linked with 1, 3, 5 triaminophenoxybenzene (TAB). The polymer concentration, n-value, and molar concentration of BAPN and DMBZ were varied to determine an ideal formulation that has both a high bend radius and low dielectric constant. With only aromatic diamines in the backbone, the aerogels are flexible only as very thin films, nominally 0.5 mm thick. Samples containing at least 25 mol % BAPN have higher flexibility in substrates as thick as 2-3 mm and dielectric constants ranging from 1.11-1.26.

Cashman, Jessica↗
NASA NTRSDate not supplied

The Influence of Yttria Content on the Thermal Stability of Yttria-Stabilized Zirconia Aerogels

Aerogels demonstrate extraordinarily low thermal conductivity and low density, presenting a promising form of lightweight insulation for aerospace applications. The primary challenge is stabilization of the highly porous structure at temperatures to 1200 °C. Upon collapse of the pore structure, the favorable thermal properties and low density are diminished. Yttria-stabilized zirconia (YSZ) aerogels are synthesized to investigate the effect of composition on morphology, phase behavior, and thermal stability (specific surface area, pore size distribution). This work demonstrates the improvement in thermal stability of zirconia aerogels with increased yttria content. To develop insight on the influence of structure on thermal stability, the effects of water content and solids loading are studied and in elucidation of the mechanism by which yttria stabilizes the pore structure. With an improved understanding of aerogel structure and performance, metal oxide aerogels can be developed to withstand the extreme environments of space exploration.

Nathaniel Olson↗
NASA NTRSDate not supplied

Optimizing Surfactant Templating of Yttria-stabilized Zirconia Aerogels for High-temperature Applications: Effect of Anionic & Nonionic Surfactant

Aerogels are useful thermal insulators due to low density, low thermal conductivity, and a tortuous path for solid conduction. However, the formulation must be optimized to increase thermal stability as drastic densification and surface area decrease is often exhibited after high-temperature exposure. Current research investigates yttria-stabilized zirconia (YSZ) aerogels for expected use between 600°C and 1000°C. We anticipate that new sol-gel chemistries will yield YSZ aerogels with retained mesoporous structure, increased surface area, and minimized shrinkage upon high-temperature exposure. This work investigates the anionic surfactant, sodium dodecyl sulfate (SDS), and the nonionic surfactant, Pluronic® P-123, as templating agents to prevent the collapse of the aerogel pore structure upon gelation and drying. To determine the effect of surfactant, characterization techniques such as nitrogen physisorption, x-ray diffraction, and scanning electron microscopy are used. By optimizing surfactant concentration, the thermal stability of YSZ aerogels can be enhanced, producing more efficient thermal insulators.

Rebecca C. Walker↗
DOE OSTI2023

High optical transparency polymer aerogels using low refractive index monomers

A method of producing a polymer aerogel includes dissolving precursors into a solvent, wherein the precursors include monomers, crosslinkers, a controlling agent and an initiator to form a precursor solution, wherein at least one of the monomers or at least one of the crosslinkers has a refractive index of 1.5 or lower, polymerizing the precursor solution to form a gel polymer, and removing the solvent from the gel polymer to produce the polymer aerogel. A method of producing a polymer aerogel include dissolving precursors into a solvent, wherein the precursors include monomers, crosslinkers, a controlling agent and an initiator to form a precursor solution, polymerizing the precursor solution to form a gel polymer, removing the solvent from the gel polymer to produce the polymer aerogel, and reducing a refractive index of one of either the gel polymer or the polymer aerogel.

Bulger, Eli↗
DOE OSTI2022

Shocked silica aerogel radiance transition

Silica (SiO 2 ) aerogel is widely used in high-energy-density shock experiments due to its low and adjustable density. Reported here are measurements of the shock velocity, optical radiance, and reflectivity of shocked SiO 2 aerogel with initial densities of 0.1, 0.2, and 0.3 g/cm 3 . These results are compared with similar data from three solid polymorphs of SiO 2 , silica, quartz, and stishovite with initial densities 2.2, 2.65, and 4.3 g/cm 3 , respectively. Interestingly, below a brightness temperature of T bright ≈ 35,000 K, the slope of the radiance vs shock velocity is the same for each of the SiO 2 aerogels and solid polymorphs. At T bright ≈ 35000 K, there is an abrupt change in the radiance vs shock velocity slope for aerogels, but not seen in the solid polymorphs over the pressures and temperatures explored here. An empirical model of shock front radiance as a function of SiO 2 density and laser drive parameters is reported to aid in the design of experiments requiring maximum shock front radiance.

42 ENGINEERING↗
NASA NTRS2014

Aerogel Antennas Communications Study Using Error Vector Magnitude Measurements

This presentation discusses an aerogel antennas communication study using error vector magnitude (EVM) measurements. The study was performed using 2x4 element polyimide (PI) aerogel-based phased arrays designed for operation at 5 GHz as transmit (Tx) and receive (Rx) antennas separated by a line of sight (LOS) distance of 8.5 meters. The results of the EVM measurements demonstrate that polyimide aerogel antennas work appropriately to support digital communication links with typically used modulation schemes such as QPSK and 4 DQPSK. As such, PI aerogel antennas with higher gain, larger bandwidth and lower mass than typically used microwave laminates could be suitable to enable aerospace-to- ground communication links with enough channel capacity to support voice, data and video links from CubeSats, unmanned air vehicles (UAV), and commercial aircraft.

Polyimide Aerogel↗
NASA NTRS2024

Secondary Electron Suppression with Carbonized Aerogels

The goal addressed by this project is reduced DC power for high data rate RF communications by increasing the efficiency of traveling Wave Tubes (TWT) for RF communication, which are used by most space missions for communication and radio science at microwave frequencies. The capability needed is a robust electron collector surface with a secondary electron emission lower than ordinary graphite, which is the state of the art. While it is known that replacing a smooth surface with a textured one will reduce secondary electron emission, no robust textured surface is known. Carbonized polyimide aerogels promise the necessary robustness along with reduced secondary electron emission, allowing further improvement of TWT efficiency, achieving a very good return on the low investment made. Aerogels are known to be robust materials, and carbon aerogels are expected to have low secondary electron emission because of their open surface structure. The objective of this proposal is to demonstrate the low secondary electron emission of carbon aerogels and their robustness.

Secondary electron sippression↗
DOE OSTI2023

Biogenic Straw Aerogel Thermal Insulation Materials

Biogenic wheat straw is a carbon-storing building insulation material. However, the enzymatic hydrolysis ratio of its cellulose is relatively low due to the presence of hemicellulose and lignin hindering its thermal insulation performance. In this work, we report aerogel and straw composites with thermal conductivity of 35 mW m –1 K –1 , while high cellulose fiber conversion in straw is obtained by using a hybrid mechanical and chemical process. Furthermore, we show that the in-situ cellulose-reinforced silica aerogel nanocomposites exhibit an optimal thermal conductivity of 32 mW m –1 K –1 by using 50 wt% of aerogel. Moreover, the hydrophobic aerogel-cellulose composites show a low density, high porosity (90 %), high compression modulus (1.9 MPa), superhydrophobicity, and superior reusability. This work provides a cost-effective and facile method to manufacture biogenic composites from agriculture waste materials, promising for carbon-sequestration building insulation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Transparent Refractory Aerogels for Efficient Spectral Control in High–Temperature Solar Power Generation

Although spectrally selective materials play a key role in existing and emerging solar thermal technologies, temperature-related degradation currently limits their use to below 700 °C in vacuum and even lower temperatures in air. Here a solar-transparent refractory aerogel that offers stable performance up to 800 °C in air is demonstrated, which is significantly greater than its silica counterpart. This improved stability is attributed to the formation of a refractory aluminum silicate phase, which is synthesized using a conformal single cycle of atomic layer deposition within the high-aspect-ratio pores of silica aerogels. Furthermore, based on direct heat loss measurements, the transparent refractory aerogel achieves a receiver efficiency of 75% at 100 suns and an absorber temperature of 700 °C, which is a 5% improvement over the state of the art. Transparent refractory aerogels may find widespread applicability in solar thermal technologies by enabling the use of lower-cost optical focusing systems and eliminating the need for highly evacuated receivers. In particular, a shift to higher operating temperatures while maintaining a high receiver efficiency can enable the use of advanced supercritical CO 2 power cycles and ultimately translate to an ≈10% (absolute) improvement in solar-to-electrical conversion efficiency relative to existing linear concentrating systems.

14 SOLAR ENERGY↗
DOE OSTI2026

Synthesis of boron-carbide aerogels

We present the synthesis of boron carbide aerogels utilizing nano-boron powder and resorcinol–formaldehyde (RF) organic aerogels as precursors. Monolithic aerogels were fabricated from suspensions of boron nanoparticles and RF via an organic sol-gel process, enabling effective distribution of boron in the gel network. The resulting gels underwent supercritical drying, thermal reduction, and subsequent heat treatment to yield boron carbide aerogels with densities ranging from 37 to 55 mg/cm³. By tuning the boron-to-carbon ratio, heat treatment temperature, and dwell time, surface areas up to 53 m²/g were obtained. X-ray diffraction analysis confirmed the formation of the boron carbide phase and detected the presence of residual carbon within the structure.

Materials science↗
NASA NTRS2013

Slotted Polyimide-Aerogel-Filled-Waveguide Arrays

This presentation discussed the potential advantages of developing Slotted Waveguide Arrays using polyimide aerogels. Polyimide (PI) aerogels offer great promise as an enabling technology for lightweight aerospace antenna systems. PI aerogels are highly porous solids possessing low density and low dielectric permittivity combined with good mechanical properties. For slotted waveguide array applications, there are significant advantages in mass that more than compensate for the slightly higher loss of the aerogel filled waveguide when compared to state of practice commercial waveguide.

Slotted Waveguide Arrays↗
NASA NTRS2014

Aerogel Antennas Communications Study Using Error Vector Magnitude Measurements

This paper discusses an aerogel antennas communication study using error vector magnitude (EVM) measurements. The study was performed using 4x2 element polyimide (PI) aerogel-based phased arrays designed for operation at 5 GHz as transmit (Tx) and receive (Rx) antennas separated by a line of sight (LOS) distance of 8.5 meters. The results of the EVM measurements demonstrate that polyimide aerogel antennas work appropriately to support digital communication links with typically used modulation schemes such as QPSK and pi/4 DQPSK. As such, PI aerogel antennas with higher gain, larger bandwidth and lower mass than typically used microwave laminates could be suitable to enable aerospace-to-ground communication links with enough channel capacity to support voice, data and video links from cubesats, unmanned air vehicles (UAV), and commercial aircraft.

Aerogel Antennas↗
NASA NTRS2015

Synthesis and Characterization of Poly(maleic Anhydride)s Cross-linked Polyimide Aerogels

With the development of technology for aerospace applications, new thermal insulation materials are required to be flexible and capable of surviving high heat flux. For instance, flexible insulation is needed for inflatable aerodynamic decelerators which are used to slow spacecraft for entry, descent and landing (EDL) operations. Polyimide aerogels have low density, high porosity, high surface area, and better mechanical properties than silica aerogels and can be made into flexible thin films, thus they are potential candidates for aerospace needs. The previously reported cross-linkers such as octa(aminophenyl)silsesquioxane (OAPS) and 1,3,5-triaminophenoxybenzene (TAB) are either expensive or not commercially available. Here, we report the synthesis of a series of polyimide aerogels cross-linked using various commercially available poly(maleic anhydride)s, as seen in Figure 1. The amine end capped polyimide oligomers were made with 3,3,4,4-biphenyltetracarboxylic dianhydride (BPDA) and diamine combinations of dimethylbenzidine (DMBZ) and 4, 4-oxydianiline (ODA). The resulting aerogels have low density (0.12 gcm3 to 0.16 gcm3), high porosity (90) and high surface area (380-554 m2g). The effect of the different poly(maleic anhydride) cross-linkers and polyimide backbone structures on density, shrinkage, porosity, surface area, mechanical properties, moisture resistance and thermal properties will be discussed.

poly(maleic anhydride)↗
NASA NTRS2015

Synthesis and Properties of Cross-Linked Polyamide Aerogels

We report the first synthesis of cross-linked polyamide aerogels through step growth polymerization using a combination of diamines, diacid chloride and triacid chloride. Polyamide oligomers endcapped with amines are prepared as stable solutions in N-methylpyrrolidinone from several different diamine precursors and 1,3-benzenedicarbonyl dichloride. Addition of 1,3,5-benzenetricarbonyl trichloride yields gels which form in under five minutes according to the scheme shown. Solvent exchange of the gels into ethanol, followed by drying using supercritical CO2 extraction gives colorless aerogels with densities around 0.1 to 0.2 gcm3. Thicker monolithes of the polyamide aerogels are stiff and strong, while thin films of certain formulations are highly flexible, durable, and even translucent. These materials may have use as insulation for deployable space structures, rovers, habitats or extravehicular activity suits as well as in many terrestrial applications. Strucure property relationships of the aerogels, including surface area, mechanical properties, and thermal conductivity will be discussed.

Aerogel↗
NASA NTRSDate not supplied

Understanding Thermal Stability in Zirconia-Based Aerogels

For lightweight, thermal insulation needs above 1000ºC, the high surface to volume ratios of ceramic-based aerogels are practically unparalleled. Yet realizing the full potential of aerogel-based thermal protection systems requires not only increased thermal stability, but also a broadened menu of stabilizing mechanisms. Here we will review our recent efforts to understand the impact of synthetic parameters and dopant chemistry on the evolution of zirconia-based ceramics. A broad parametric window for thermal stability is established, in which the more sensitive variable of composition has been probed. However, dopant chemistry is actually an aggregate for many closely related material parameters including surface energy, enthalpy of formation, each of which may contribute uniquely to aerogel destabilization. A truly predictive design framework for ceramic-based aerogels requires further decoupling of these underlying properties through systematic and comprehensive evaluation of thermodynamic properties.

aerogel↗
DOE OSTI2020

3D Hybrid Nanofiber Aerogels Combining with Nanoparticles Made of a Biocleavable and Targeting Polycation and MiR‐26a for Bone Repair

Abstract The healing of large bone defects represents a clinical challenge, often requiring some form of grafting. 3D nanofiber aerogels could be a promising bone graft due to their biomimetic morphology and controlled porous structures and composition. miR‐26a has been reported to induce the differentiation of bone marrow‐derived mesenchymal stem cells (BMSCs) and facilitate bone formation. Introducing miR‐26a with a suitable polymeric vector targeting BMSCs could improve and enhance the functions of 3D nanofiber aerogels for bone regeneration. Herein, the comb‐shaped polycation (HA–SS–PGEA) is first developed, carrying a targeting component, biocleavable groups, and short ethanolamine (EA)‐decorated poly(glycidyl methacrylate) (PGMA) (abbreviated as PGEA) arms as miR‐26a delivery vector. Thereafter, the cytotoxicity and transfection efficiency of this polycation and cellular response to miR‐26a‐incorporated nanoparticles (NPs) are assessed in vitro. HA–SS–PGEA exhibits a stronger ability to transport miR‐26a and exert its functions than the gold standard polyethyleneimine (PEI) and low‐molecular‐weight linear PGEA. The efficacy of HA–SS–PGEA/miR‐26a NPs loaded 3D hybrid nanofiber aerogels showing a positive effect on the cranial bone defect healing is finally examined. Together, the combination of 3D nanofiber aerogels and functional NPs consisting of a biodegradable and targeting polycation and therapeutic miRNA could be a promising approach for bone regeneration.

Li, Ruiquan↗