Search NASA⌕ Search

SEARCH · Search NASA

Results for “approximate control variates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Experimental comparison of seven commercial dosimetry diodes for measurement of stereotactic radiosurgery cone factors

Purpose: The purpose of this work is to assess the variation in performance of various commercially available dosimetry diodes for quantitative small field dosimetry, specifically by intercomparing measurements of SRS cone factors. Methods: Measurements were made in 6 MV photon beams with fixed SRS cones for two accelerator-based SRS systems: a Varian Clinac iX (Varian/Zmed cones) at 600 MU/min and a CyberKnife model G4 at 800 MU/min. Measurements were made at 1.5 cm depth in water using the IBA Dosimetry ''blue phantom'' 3D scanning system, controlled by omnipro-accept software. Source-to-detector distance was 100 cm for the Clinac, 80 cm for the CyberKnife. Two normalization methods were used for the Clinac, one directly referenced to diode measurements in a 10 cm x 10 cm square field and the other indirectly by ''daisy-chaining'' diode measurements to ion chamber measurement in the 10 cm x 10 cm reference field through an intermediate 4 cm x 4 cm square field. CyberKnife factors were referenced directly to measurements in the 60 mm reference field. Seven commercial diodes were evaluated: PTW TN60008, TN60012, TN60016, TN60017; IBA Dosimetry SFD; Sun Nuclear EDGE; Exradin SD1 (first generation prototype). Results: With the exception of the SFD, all the evaluated devices yielded surprisingly consistent results. Standard deviations of Clinac factors for four diodes (SD1, EDGE, TN60008, and TN60012) ranged from approximately 0.50% at 30 mm to 2.0% at 5 mm cones size when referenced directly to the 10 cm x 10 cm measurement. The daisy-chaining strategy reduced the standard deviation to approximately 0.30% at 30 mm and 1.9% at 5 mm. Standard deviations for the same four diodes in the CyberKnife beam ranged up to approximately 1.0% at 5 mm. Conclusions: The inter-detector variation is small and appears to be systematic with detector packaging, more inherent filtration producing flatter curves for both the relatively hard Clinac beam and the softer CyberKnife beam. The daisy-chain strategy appears to be of limited value for most of the diodes, but does bring the SFD results into significantly better agreement with the others.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Role of polarization interaction in photoionization of negative ions of alkali metals

Photoionization processes of negative ions of sodium, potassium, and rubidium were investigated. Calculations of the dependence of the photoionization cross section on the photon energy were performed within the Random Phase Approximation with Exchange for outer subshells (RPAE) and within the Generalized Random Phase Approximation with Exchange (GRPAE) for inner subshells. The latter theoretical approach includes both many-electron correlations and core rearrangement due to escape of one of the electrons from the system. The results of calculations for the negative sodium ion were found to be in good agreement with experimental data. Better agreement was achieved by allowing dynamical polarization of the electron core. It manifests itself as a many-electron response to variation of the external electromagnetic field, which results from the excitation of the many-electron system. Detailed study of the main mechanisms determining the cross section dependence profile was carried out. These mechanisms are the inter- and intrachannel correlations acting as a many-electron response to the external field, the electron core rearrangement, and the dynamic polarization. Besides sodium and potassium ions, photoionization of rubidium ion was investigated. A new method accounting for polarization corrections to optical transition amplitudes based on combination of the Dyson equation and RPAE is proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Data-Driven Global Sensitivity Analysis Framework for Three-Phase Distribution System with PVs

Global sensitivity analysis (GSA) of distribution systems with respect to stochastic PV and load variations plays an important role in designing optimal voltage control schemes. This paper proposes a data-driven framework for GSA of distribution systems. In particular, two representative surrogate modeling-based approaches are developed, including the traditional Gaussian process-based and the analysis of variance (ANOVA) kernel ones. The key idea is to develop a surrogate model that captures the hidden global relationship between voltage and real and reactive power injections from the historical data. With the surrogate model, the Sobol indices can be conveniently calculated through either the sampling-based method or the analytical method to assess the global sensitivity of voltage to variations of PV and load power injections. The sampling-based method approximates the Sobol indices using Monte Carlo simulations while the analytical method calculates them by resorting to the ANOVA expansion framework. Comparison results with other model-based GSA methods on the unbalanced three-phase IEEE 37-bus and 123-bus distribution systems show that the proposed framework can achieve much higher computational efficiency with negligible loss of accuracy. The results on a real 240-node distribution system using actual smart meter data further validate the feasibility and scalability of the proposed framework.

14 SOLAR ENERGY↗

Analytical Models of Frequency and Voltage in Large-Scale All-Inverter Power Systems

Low-order frequency response models for power systems have a decades-long history in optimization and control problems such as unit commitment, economic dispatch, and wide-area control. With a few exceptions, these models are built upon the Newtonian mechanics of synchronous generators, assuming that the frequency dynamics across a system are approximately homogeneous, and assume the dynamics of nodal voltages for most operating conditions are negligible, and thus are not directly computed at all buses. As a result, the use of system frequency models results in the systematic underestimation of frequency minimum nadir and maximum RoCoF, and provides no insight into the reactive power-voltage dynamics. This paper proposes a low-order model of both frequency and voltage response in grid-forming inverter-dominated power systems. The proposed model accounts for spatial-temporal variations in frequency and voltage behavior across a system and as a result, demonstrates the heterogeneity of frequency response in future renewable power systems. Electromagnetic transient (EMT) simulations are used to validate the utility, accuracy, and computational efficiency of these models, setting the basis for them to serve as fast, scalable alternatives to EMT simulation, especially when dealing with very large-scale systems, for both planning and operational studies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Dose-shaping using targeted sparse optimization

Purpose: Dose volume histograms (DVHs) are common tools in radiation therapy treatment planning to characterize plan quality. As statistical metrics, DVHs provide a compact summary of the underlying plan at the cost of losing spatial information: the same or similar dose-volume histograms can arise from substantially different spatial dose maps. This is exactly the reason why physicians and physicists scrutinize dose maps even after they satisfy all DVH endpoints numerically. However, up to this point, little has been done to control spatial phenomena, such as the spatial distribution of hot spots, which has significant clinical implications. To this end, the authors propose a novel objective function that enables a more direct tradeoff between target coverage, organ-sparing, and planning target volume (PTV) homogeneity, and presents our findings from four prostate cases, a pancreas case, and a head-and-neck case to illustrate the advantages and general applicability of our method.Methods: In designing the energy minimization objective (E{sub tot}{sup sparse}), the authors utilized the following robust cost functions: (1) an asymmetric linear well function to allow differential penalties for underdose, relaxation of prescription dose, and overdose in the PTV; (2) a two-piece linear function to heavily penalize high dose and mildly penalize low and intermediate dose in organs-at risk (OARs); and (3) a total variation energy, i.e., the L{sub 1} norm applied to the first-order approximation of the dose gradient in the PTV. By minimizing a weighted sum of these robust costs, general conformity to dose prescription and dose-gradient prescription is achieved while encouraging prescription violations to follow a Laplace distribution. In contrast, conventional quadratic objectives are associated with a Gaussian distribution of violations, which is less forgiving to large violations of prescription than the Laplace distribution. As a result, the proposed objective E{sub tot}{sup sparse} improves tradeoff between planning goals by 'sacrificing' voxels that have already been violated to improve PTV coverage, PTV homogeneity, and/or OAR-sparing. In doing so, overall plan quality is increased since these large violations only arise if a net reduction in E{sub tot}{sup sparse} occurs as a result. For example, large violations to dose prescription in the PTV in E{sub tot}{sup sparse}-optimized plans will naturally localize to voxels in and around PTV-OAR overlaps where OAR-sparing may be increased without compromising target coverage. The authors compared the results of our method and the corresponding clinical plans using analyses of DVH plots, dose maps, and two quantitative metrics that quantify PTV homogeneity and overdose. These metrics do not penalize underdose since E{sub tot}{sup sparse}-optimized plans were planned such that their target coverage was similar or better than that of the clinical plans. Finally, plan deliverability was assessed with the 2D modulation index.Results: The proposed method was implemented using IBM's CPLEX optimization package (ILOG CPLEX, Sunnyvale, CA) and required 1-4 min to solve with a 12-core Intel i7 processor. In the testing procedure, the authors optimized for several points on the Pareto surface of four 7-field 6MV prostate cases that were optimized for different levels of PTV homogeneity and OAR-sparing. The generated results were compared against each other and the clinical plan by analyzing their DVH plots and dose maps. After developing intuition by planning the four prostate cases, which had relatively few tradeoffs, the authors applied our method to a 7-field 6 MV pancreas case and a 9-field 6MV head-and-neck case to test the potential impact of our method on more challenging cases. The authors found that our formulation: (1) provided excellent flexibility for balancing OAR-sparing with PTV homogeneity; and (2) permitted the dose planner more control over the evolution of the PTV's spatial dose distribution than conventional objective functions. In particular, E{sub tot}{sup sparse}-optimized plans for the pancreas case and head-and-neck case exhibited substantially improved sparing of the spinal cord and parotid glands, respectively, while maintaining or improving sparing for other OARs and markedly improving PTV homogeneity. Plan deliverability for E{sub tot}{sup sparse}-optimized plans was shown to be better than their associated clinical plans, according to the two-dimensional modulation index.Conclusions: These results suggest that our formulation may be used to improve dose-shaping and OAR-sparing for complicated disease sites, such as the pancreas or head and neck. Furthermore, our objective function and constraints are linear and constitute a linear program, which converges to the global minimum quickly, and can be easily implemented in treatment planning software. Thus, the authors expect fast translation of our method to the clinic where it may have a positive impact on plan quality for challenging disease sites.

61 RADIATION PROTECTION AND DOSIMETRY↗

Field-scale dynamics of planting dates in the US Corn Belt from 2000 to 2020

Crop planting dates are a dynamic feature of agricultural systems that respond to short- and long-term climate signals, crop and cultivar selection, and technology changes. Planting date records are essential for yield gap analyses, accurate crop modeling, and tracking farmer adaptations to weather and climate change. Although planting dates have high variation at local scales due to heterogeneity in farm resources and decision-making, available long-term data on planting dates is largely restricted to aggregated regional statistics or, at best, satellite-derived datasets with limited spatiotemporal extent and at resolutions unable to distinguish individual fields (> 250 m). Here, we generated retrospective annual field-scale (30 m) planting date maps for both maize and soybeans spanning 2000-2020 across a 12 state region in the United States Corn Belt based on Landsat satellite data and a large ground sample of over 28,000 maize and soybean fields. Using training data from 2015-2020 for model selection, we found that planting date predictions improved with harmonic regression of Landsat data and additional annual weather covariates. The preferred random forests model approximately doubled performance compared to a null model based on state median planting dates, capturing 47% of field-level variation for maize (mean absolute error, MAE = 7.4 days) and 44% for soybeans (MAE = 7.5 days) against held-out ground truth test data for 2008-2014. We also evaluated the full 2000-2020 dataset with state agricultural statistics, finding strong agreement with median planting dates for maize (R 2 = 0.76, MAE = 4.4 days) and slightly lower agreement for soybeans (R 2 = 0.65, MAE = 5.4 days) when aggregated to the state level. We then used this new dataset to analyze environmental determinants of planting dates at a finer-scale than previously possible, controlling for unobserved variation at the sub-state district level. We found that during 2000-2020, each standard deviation increase in rainfall delayed planting by ~ 2.5 days, and fields with higher soil productivity ratings tended to be planted earlier. We did not find meaningful trends over the last two decades in planting dates for maize or soybeans, in contrast to trends towards earlier planting dates late last century and predicted for this period in climate adaptation studies. We hypothesize increases in early season rainfall may have inhibited these shifts towards earlier planting. Remotely sensed planting dates will be a useful tool for yield gap analyses, crop simulation modeling, and ongoing assessment of climate adaptation.

54 ENVIRONMENTAL SCIENCES↗

Spatial Microbial Respiration Variations in the Hyporheic Zones Within the Columbia River Basin

Abstract While the hyporheic zone (HZ) accounts for a significant portion of whole stream CO 2 concentrations, HZ respiration modeling studies are lacking in quantifying their contributions to the total CO 2 at large watershed/basin scales. Quantifying the contribution of anaerobic respiration is also underappreciated. This study used a carbon‐nitrogen‐coupled river corridor model to quantify HZ aerobic and anaerobic respiration and determined the key factors controlling their spatial variability within the Columbia River Basin (CRB). The modeled respiration patterns showed high spatial variability. Among the nine sub‐basins composing the CRB, the Lower Columbia and the Willamette, which receive higher precipitation, had higher respiration. Medium‐sized rivers (fourth to sixth orders) produced the highest aerobic and anaerobic respiration among reaches of different sizes. At the basin scale, aerobic respiration is dominant, representing approximately 98.7% of the total respiration across the CRB. While most of the reaches were dominant with aerobic respiration, reaches in agricultural land showed a relatively higher anaerobic respiration (18%) ratio. A variable importance analysis showed that hyporheic exchange flux controlled most of the spatial variability of HZ respiration, dominating over other physical variables such as residence time, stream dissolved organic carbon (DOC), nitrate, and dissolved oxygen (DO). The influence of substrate concentration (DOC and DO) is larger in modeling anaerobic respiration than aerobic respiration. Future efforts will focus on improving the estimation of the HZ exchange flux and the implementation of spatially explicit parameterizations for the reactions of interest to reduce model uncertainty.

54 ENVIRONMENTAL SCIENCES↗

Detailed analysis of excited-state systematics in a lattice QCD calculation of 𝑔 𝐴

Excited state contamination remains one of the most challenging sources of systematic uncertainty to control in lattice QCD calculations of nucleon matrix elements and form factors: early time separations are contaminated by excited states and late times suffer from an exponentially bad signal-to-noise problem. High-statistics calculations at large time separations ≳ 1 fm are commonly used to combat these issues. In this work, focusing on g A , we explore the alternative strategy of utilizing a large number of relatively low-statistics calculations at short to medium time separations (0.2–1 fm), combined with a multistate analysis. On an ensemble with a pion mass of approximately 310 MeV and a lattice spacing of approximately 0.09 fm, we find this provides a more robust and economical method of quantifying and controlling the excited state systematic uncertainty. A quantitative separation of various types of excited states enables the identification of the transition matrix elements as the dominant contamination. The excited state contamination of the Feynman-Hellmann correlation function is found to reduce to the 1% level at approximately 1 fm while, for the more standard three-point functions, this does not occur until after 2 fm. Critical to our findings is the use of a global minimization, rather than fixing the spectrum from the two-point functions and using them as input to the three-point analysis. We find that the ground state parameters determined in such a global analysis are stable against variations in the excited state model, the number of excited states, and the truncation of early-time or late-time numerical data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cumulative sum quality control for calibrated breast density measurements

Purpose: Breast density is a significant breast cancer risk factor. Although various methods are used to estimate breast density, there is no standard measurement for this important factor. The authors are developing a breast density standardization method for use in full field digital mammography (FFDM). The approach calibrates for interpatient acquisition technique differences. The calibration produces a normalized breast density pixel value scale. The method relies on first generating a baseline (BL) calibration dataset, which required extensive phantom imaging. Standardizing prospective mammograms with calibration data generated in the past could introduce unanticipated error in the standardized output if the calibration dataset is no longer valid. Methods: Sample points from the BL calibration dataset were imaged approximately biweekly over an extended timeframe. These serial samples were used to evaluate the BL dataset reproducibility and quantify the serial calibration accuracy. The cumulative sum (Cusum) quality control method was used to evaluate the serial sampling. Results: There is considerable drift in the serial sample points from the BL calibration dataset that is x-ray beam dependent. Systematic deviation from the BL dataset caused significant calibration errors. This system drift was not captured with routine system quality control measures. Cusum analysis indicated that the drift is a sign of system wear and eventual x-ray tube failure. Conclusions: The BL calibration dataset must be monitored and periodically updated, when necessary, to account for sustained system variations to maintain the calibration accuracy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Sensitivity of the Shallow‐To‐Deep Convective Transition to Moisture and Wind Shear in the Amazon

Deep convection is the primary influence on weather and climate in tropical regions. However, understanding and simulating the shallow‐to‐deep (STD) convective transition has long been challenging. Here, we conduct high‐resolution numerical simulations to assess the environmental controls on the evolution of isolated convection in the Amazon during the wet season. The large‐scale forcing derived through a constrained variational analysis approach for the GoAmazon2014/5 Experiment is used in the simulations. Through sensitivity experiments, we examine the relative importance of moisture and wind shear in controlling the shallow‐to‐deep convective transition for isolated convective events. Convection exhibits the greatest sensitivity to humidity within the lowest 1.5 km, where a 4 mm reduction in column water vapor nearly suppresses ice water formation on deep convective days. In contrast, a reduction in column water vapor in the free troposphere by a factor of two or more is necessary to produce a comparable impact on convection. Increasing low‐level wind speed from 6 to 9 m s -1 enhances afternoon deep convection, raising the cloud ice mixing ratio by approximately 25%. Conversely, upper‐level wind shear reveals the weakest correlation with daytime convection in our simulations. Our results help characterize the role of moisture and wind shear on the STD transition and our understanding of the underlying mechanisms.

environmental controls↗

Magnetic structures in RNi₄B (R=Nd, Tb, Ho, Er)

Neutron diffraction has been performed on RNi₄B (R=Nd, Tb, Ho, Er) polycrystals. The orthorhombic structure for NdNi₄B and the CeCo₄B structure type (hexagonal) for TbNi₄B and HoNi₄B are confirmed. Our data also show that this last structure is currently the best approximant for ErNi₄B. The RNi₄B (R=Nd, Tb, Ho, Er) order ferromagnetically at respectively 11.0, 18.1, 6.2 and 10.0 K. The crystal electric field (CEF) interaction controls the magnetic anisotropy in this series leading to an easy axis ~30 deg above the basal plane in RNi₄B (R=Nd, Tb, Ho) and parallel to the c-axis in ErNi₄B at 1.6 K. The RNi₄B (R=Nd, Tb, Ho) display a spin re-orientation below T c which arises from a competition between the second order term and the higher order terms of the CEF hamiltonian. - Graphical abstract: Simplified magnetic structure in NdNi₄B and full magnetic structure in RNi₄B (R=Tb, Ho). Variation with temperature of the easy magnetization axis direction (angle with c-axis) showing a spin re-orientation. Highlights: • RNi₄B (R=Nd, Tb, Ho, Er) polycrystals were inductively melted. • Neutron diffraction confirms they all order ferromagnetically. • The magnetization easy axis is parallel to the c-axis in ErNi₄B. • The RNi₄B (R=Nd, Tb, Ho) display a spin re-orientation below T c . • Their easy axis tilts from the c-axis at T c to ~30 deg above the basal plane at 1.5 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Industrial deposition of wavelength-shifting films for liquid argon photon detection systems

The Deep Underground Neutrino Experiment (DUNE) Phase-II Far Detector is considering an approximately 2000 m 2 photon detection system to achieve a target mean light yield of 180 PE/MeV. Meeting this requirement demands scalable, cost-effective, and high-quality wavelength-shifter (WLS) coatings capable of converting 127 nm liquid-argon scintillation light into visible photons with controlled and reproducible optical performance. We report on the successful realization of an industrial physical vapor deposition (PVD) process forp-terphenyl (pTP) coatings, adapted from vacuum deposition techniques developed for OLED display manufacturing, to produce uniform WLS layers on large-area inorganic substrates, a task traditionally challenged by adhesion and uniformity issues at organic-inorganic interfaces. Surface characterization by profilometry and spectroscopic measurements demonstrates edge-region thickness variation below 10% and emission spectra consistent with high-quality pTP reference samples. The industrial process demonstrates reproducibility, scalability, and significantly reduced production time compared to laboratory-based methods, while maintaining optical characteristics consistent with established pTP reference samples. These results establish a viable pathway for mass production of high-performance pTP coatings for DUNE FD3 and future neutrino experiments, from a coating manufacturing and process standpoint. Detector-level performance validation, including quantitative VUV conversion efficiency measurements at 127 nm, is identified as future work.

47 OTHER INSTRUMENTATION↗

ARIES Blend Lot Book Data Analysis

The Advanced Recovery Integrated Extraction System (ARIES) Program being executed at Los Alamos TA-55 produces unpolished plutonium oxide powder from pit disassembly in batches of material referred to as a blend lot. Each blend lot is sampled and analyzed by Los Alamos group C-AAC (Chemistry Division, Actinide Analytical Chemistry Group) for radioactive and nonradioactive constituents contained in the material. A blend lot, which nominally consists of 12 kg(Pu), is then packaged into three DOE-STD-3013 containers that are analyzed by nondestructive analysis (NDA) to determine the fraction and total amount of plutonium mass relative to impure plutonium oxide. The analytical and NDA data are presented in a Blend Lot Book (BLB). The data are used to confirm that a blend lot grouping of three cans meets the requirements for off-site shipment specified in the formal interface control document (ICD). The analytical and NDA data from 49 blend lots were reviewed to provide summary-level information on the constituents present in the blend lots. The results provide an overall perspective in historical amounts for constituent averages over all blend lots and similar information in the variation between constituent levels. Note that to properly compare the can contents, it would be most appropriate to decay all of cans’ constituents to a particular date. Previously, this analysis only examined statistical data as determined at the time of blend lot chemical analysis. The chemical analysis dates span the period from June 2011 to May 2015 (4 years), which is 28% of one Pu-241 half-life. Therefore, the approximate nature of the aggregate information must be properly understood in this light. However, to address this issue, a new table is included in this revision that decays the 48 blend lots to a single date.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emissions reduction scenarios in the Argentinean Energy Sector

Here in this paper the LEAP, TIAM-ECN, and GCAM models were applied to evaluate the impact of a variety of climate change control policies (including carbon pricing and emission constraints relative to a base year) on primary energy consumption, final energy consumption, electricity sector development, and CO 2 emission savings of the energy sector in Argentina over the 2010-2050 period. The LEAP model results indicate that if Argentina fully implements the most feasible mitigation measures currently under consideration by official bodies and key academic institutions on energy supply and demand, such as the ProBiomass program, a cumulative incremental economic cost of 22.8 billion US$(2005) to 2050 is expected, resulting in a 16% reduction in GHG emissions compared to a business-as-usual scenario. These measures also bring economic co-benefits, such as a reduction of energy imports improving the balance of trade. A Low CO 2 price scenario in LEAP results in the replacement of coal by nuclear and wind energy in electricity expansion. A High CO 2 price leverages additional investments in hydropower. An emission cap scenario (2050 emissions 20% lower than 2010 emissions) is feasible by including such measures as CCS and Bio CCS, but at a significant cost. By way of cross-model comparison with the TIAM-ECN and GCAM global integrated assessment models, significant variation in projected emissions reductions in the carbon price scenarios was observed, which illustrates the inherent uncertainties associated with such long-term projections. These models predict approximately 37% and 94% reductions under the High CO 2 price scenario, respectively. By comparison, the LEAP model, using an approach based on the assessment of a limited set of mitigation options, predicts a 11.3% reduction under the ‘high’ carbon tax. The main reasons for this difference are differences in assumptions about technology cost and availability, CO 2 storage capacity, and the ability to import bioenergy. In terms of technology pathways, the models agree that fossil fuels, in particular natural gas, will remain an important part of the electricity mix in the core baseline scenario. Finally, according to the models there is agreement that the introduction of a carbon price will lead to a decline in absolute and relative shares of aggregate fossil fuel generation. However, predictions vary as to the extent to which coal, nuclear and renewable energy play a role.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

On the variability of the Priestley‐Taylor coefficient over water bodies

Abstract Deviations in the Priestley‐Taylor (PT) coefficient α PT from its accepted 1.26 value are analyzed over large lakes, reservoirs, and wetlands where stomatal or soil controls are minimal or absent. The data sets feature wide variations in water body sizes and climatic conditions. Neither surface temperature nor sensible heat flux variations alone, which proved successful in characterizing α PT variations over some crops, explain measured deviations in α PT over water. It is shown that the relative transport efficiency of turbulent heat and water vapor is key to explaining variations in α PT over water surfaces, thereby offering a new perspective over the concept of minimal advection or entrainment introduced by PT. Methods that allow the determination of α PT based on low‐frequency sampling (i.e., 0.1 Hz) are then developed and tested, which are usable with standard meteorological sensors that filter some but not all turbulent fluctuations. Using approximations to the Gram determinant inequality, the relative transport efficiency is derived as a function of the correlation coefficient between temperature and water vapor concentration fluctuations ( R Tq ). The proposed approach reasonably explains the measured deviations from the conventional α PT = 1.26 value even when R Tq is determined from air temperature and water vapor concentration time series that are Gaussian‐filtered and subsampled to a cutoff frequency of 0.1 Hz. Because over water bodies, R Tq deviations from unity are often associated with advection and/or entrainment, linkages between α PT and R Tq offer both a diagnostic approach to assess their significance and a prognostic approach to correct the 1.26 value when using routine meteorological measurements of temperature and humidity.

Assouline, Shmuel↗

Drift-Diffusion Modeling of the Effects of Structural Disorder and Carrier Mobility on the Performance of Organic Photovoltaic Devices

We probe the effects of structural disorder on the performance of organic photovoltaic (OPV) devices via drift-diffusion modeling. Here, we utilize ensembles of spatially disordered one-dimensional mobility profiles to approximate the three-dimensional structural disorder present in actual devices. Each replica in our ensemble approximates one high-conductivity pathway through the three-dimensional network(s) present in a polymer-based bulk heterojunction solar cell, so that the ensemble-averaged behavior provides a good approximation to a full three-dimensional structurally disordered device. Our calculations show that the short-circuit current, fill factor, and power conversion efficiency of simulated devices are all negatively impacted by the inclusion of structural disorder, but that the open-circuit voltage is nearly impervious to structural defects. This is in contrast to energetic disorder, where previous studies found that spatial variation in the energy in OPV active layers causes a decrease in the open-circuit voltage. We also show that structural disorder causes the greatest detriment to device performance for feature sizes between 2 and 10 nm. Since this is on the same length scale as the fullerene crystallites in experimental devices, it suggests both that controlling structural disorder is critical to the performance of OPV devices and that the effects of structural disorder should be included in future drift-diffusion modeling studies of organic solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of formation of wiggly compaction bands in porous sandstone: 2. Numerical simulation using discrete element method

Wiggly compaction bands in porous aeolian s andstone vary from chevron shape to wavy shape to nearly straight. In some outcrops these variations occur along a single band. Here, a bonded close-packed discrete element model is used to investigate what mechanical properties control the formation of wiggly compaction bands (CBs). To simulate the volumetric yielding failure of porous sandstone, a discrete element shrinks when the force state of one of its bonds reaches the yielding cap defined by the failure force and the aspect ratio (k) of the yielding ellipse. A Matlab code “MatDEM 3D ” has been developed on the basis of this enhanced discrete element method. Mechanical parameters of elements are chosen according to the elastic properties and the strengths of porous sandstone. In numerical simulations, the failure angle between the band segment and maximum principle stress decreases from 90° to approximately 45° as k increases from 0.5 to 2, and compaction bands vary from straight to chevron shape. With increasing strain, subsequent compaction occurs inside or beside compacted elements, which leads to further compaction and thickening of bands. The simulations indicate that a greater yielding stress promotes chevron CBs, and a greater cement strength promotes straight CBs. Combined with the microscopic analysis introduced in the companion paper, we conclude that the shape of wiggly CBs is controlled by the mechanical properties of sandstone, including the aspect ratio of the yielding ellipse, the cri tical yielding stress, and the cement strength, w hich are d etermined primarily by petrophysical attributes, e.g., grain sorting, porosity, and cementation.

58 GEOSCIENCES↗

Quantifying the impact of precision errors on quantum approximate optimization algorithms

The quantum approximate optimization algorithm (QAOA) is a hybrid quantum-classical algorithm that seeks to achieve approximate solutions to optimization problems by iteratively alternating between intervals of controlled quantum evolution. Here, we examine the effect of analog precision errors on QAOA performance from the perspective of both algorithmic training and performance guarantees. Leveraging cumulant expansions, we recast the faulty QAOA as a control problem in which precision errors are expressed as multiplicative control noise and derive bounds on the performance of QAOA. We show using both analytical techniques and numerical simulations that fixed precision implementations of QAOA circuits are subject to an exponential degradation in performance dependent upon the number of optimal QAOA layers and magnitude of the precision error. Despite this significant reduction, we show that it is possible to mitigate precision errors in QAOA via digitization of the variational parameters at the cost of increasing circuit depth.

quantum algorithms↗