Search NASA⌕ Search

SEARCH · Search NASA

Results for “artificial lattices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Vortex Ordering and Dynamics of Santa Fe Artificial Ice Pinning Arrays

We numerically examine the ordering, pinning, and flow of superconducting vortices interacting with a Santa Fe artificial ice pinning array. We find that as a function of magnetic field and pinning density, a wide variety of vortex states occur, including ice rule obeying states and labyrinthine patterns. In contrast to square pinning arrays, we find no sharp peaks in the critical current due to the inherent frustration effect imposed by the Santa Fe ice geometry; however, there are some smoothed peaks when the number of vortices matches the number of pinning sites. For some fillings, the Santa Fe array exhibits stronger pinning than the square array due to the suppression of one-dimensional flow channels when the vortex motion in the Santa Fe lattice occurs through the formation of both longitudinal and transverse flow channels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Optimization of the deep neural network parameters for generating homogenized fuel assembly data for nodal codes

Homogenized fuel assembly (FA) data is a typical input data for nodal codes. Generating that data, however, could be time-consuming. One of promising ways to mitigate the computational burden of generating macroscopic cross-sections is to use trained artificial neural network (ANN) models for predicting nuclear data. However, there is a challenge to make the model support variable FA geometry. In this work, two most common types of FA were combined in one ANN model. Since there could be multiple ways of converting 2-dimensional FA data into 1-dimensional input vector for ANN, three different approaches of data flattening were evaluated. The input parameters included each fuel pin enrichment, fuel temperature, moderator temperature and boron concentration. The output parameters were 2-group macroscopic cross-sections (XS) and pin power distribution (HFF). A fully connected deep neural network (DNN) model was trained and tested using pre-generated data obtained with lattice physics code STREAM. The results of this study showed no statistically significant difference in the accuracy of XS and HFF generation for all 3 tested input vector orders. This means that fully connected DNN for XS generation demonstrated input sequence invariance. Results of comparing predicted XS data with reference solutions were found sufficiently close considering the reduction of computation time offered by ANN. Mean relative difference (MRD) for all output XS parameters was found below 0.7%, while HFF MRD was found higher compared to XS values, in some cases slightly exceeding 1%, mostly near guide tube locations. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Emergent disorder and mechanical memory in periodic metamaterials

Ordered mechanical systems typically have one or only a few stable rest configurations, and hence are not considered useful for encoding memory. Multistable and history-dependent responses usually emerge from quenched disorder, for example in amorphous solids or crumpled sheets. In contrast, due to geometric frustration, periodic magnetic systems can create their own disorder and espouse an extensive manifold of quasi-degenerate configurations. Inspired by the topological structure of frustrated artificial spin ices, we introduce an approach to design ordered, periodic mechanical metamaterials that exhibit an extensive set of spatially disordered states. While our design exploits the correspondence between frustration in magnetism and incompatibility in meta-mechanics, our mechanical systems encompass continuous degrees of freedom, and thus generalize their magnetic counterparts. We show how such systems exhibit non-Abelian and history-dependent responses, as their state can depend on the order in which external manipulations were applied. We demonstrate how this richness of the dynamics enables to recognize, from a static measurement of the final state, the sequence of operations that an extended system underwent. Thus, multistability and potential to perform computation emerge from geometric frustration in ordered mechanical lattices that create their own disorder.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effective permeability of an immiscible fluid in porous media determined from its geometric state

Based on the phenomenological extension of Darcy's law, two-fluid flow is dependent on a relative permeability function of saturation only that is process or path dependent with an underlying dependency on pore structure and wettability. For applications (fuel cells to underground CO 2 storage), it is imperative to determine the effective phase permeability relationships where the traditional approach is based on the inverse modeling of time-consuming experiments. The underlying reason is that the fundamental upscaling step from pore to Darcy scale, which links the pore structure of the porous medium to the continuum hydraulic conductivities, is not solved. Herein, we develop an artificial neural network (ANN) that relies on fundamental geometrical relationships to determine the mechanical energy dissipation during creeping immiscible two-fluid flow. Finally, the developed ANN is based on a prescribed set of state variables based on physical insights that predict the effective permeability of 4500 unseen pore-scale geometrical states with R 2 = 0.98.

42 ENGINEERING↗
DOE OSTI2022

Dynamic coupling and spin-wave dispersions in a magnetic hybrid system made of an artificial spin-ice structure and an extended NiFe underlayer

We present a combined experimental and numerical study of the spin-wave dispersion in a NiFe artificial spin-ice (ASI) system consisting of an array of stadium-shaped nanoislands deposited on the top of a continuous NiFe film with non-magnetic spacer layers of varying thickness. The spin-wave dispersion, measured by wavevector resolved Brillouin light scattering spectroscopy in the Damon–Eshbach configuration, consists of a rich number of modes, with either stationary or propagating character. We find that the lowest frequency mode displays a bandwidth of ~0.5 GHz, which is independent of the presence of the film underneath. On the contrary, the Brillouin light scattering intensity of some of the detected modes strongly depends on the presence of the extended thin-film underlayer. Micromagnetic simulations unveil the details of the dynamic coupling between the ASI lattice and film underlayer. Interestingly, the ASI lattice facilitates dynamics of the film either specific wavelengths or intensity modulation peculiar to the modes of the ASI elements imprinted in the film. Our results demonstrate that propagating spin waves can be modulated at the nanometer length scale by harnessing the dynamic mode coupling in the vertical, i.e., the out-of-plane direction of suitably designed magnonic structures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reconfigurable plasma-dielectric hybrid photonic crystal as a platform for electromagnetic wave manipulation and computing

The introduction of 3D printing has enabled fabrication of photonic crystal devices with complex crystal structures that would be challenging to construct using other fabrication methods. In this paper, we construct and characterize a photonic crystal consisting of two 4 x 8 x 8 cubic lattices composed of spherical silicon nitride elements straddling a layer of 8 plasma discharge tubes, creating a 3D hybrid plasma photonic crystal device. Integrating under-dense gaseous plasma elements provides a unique coupling dynamic between the dielectric spheres and the cylindrical plasma discharges, creating a monolithic hybrid photonic crystal with solid state and reconfigurable elements. The device has resonant modes that have attenuation peaks that are either switchable, tunable in amplitude, or tunable in frequency with variations in plasma density. The response of these bands seen with varying plasma density is confirmed through simulations when effects due to the heating of the photonic crystal from the gaseous plasma elements are accounted for in the experiments. We discuss how this reconfigurable device may be used and expanded upon for applications in photonic artificial neural networks and optical computing systems.

3D printing↗
DOE OSTI2026

On the uncertainties in helium generation predictions for fission and fusion alloys

With ongoing advances in fusion and advanced fission reactors, quantifying irradiation effects in materials is critical. Transmutation-induced helium in cladding and structural materials can drive swelling and embrittlement, thereby reducing these components’ lifespans. Yet most studies ignore the considerable uncertainties in predicting helium generation rates. In this work, we created a code wrapper, F-SCATTER, that automatically performs simulations in FISPACT-II. We used this tool to investigate potential variance in helium generation rate, or He/dpa, calculations based on deviations in alloy composition, irradiating neutron flux spectrum, computational methodology, and nuclear data sources. We used 12 wt% Cr HT9 steel as the reference case and observed a 6.5%–98.3% He/dpa spread based on compositional variation within a single chemical specification, a 1.8%–11.5% He/dpa variation upon the incorporation of a 15% artificial uncertainty in flux at each energy, and a He/dpa difference as high as 231% when using ENDF/B-VIII.0 versus TENDL-2021 data libraries. Similar results were found for other prominent iron-based alloys, including Grade 91, castable nano-structured alloy, and 316H—where additional variations exist based on reactor type (e.g. thermal, fast, or fusion) and alloying elements such as carbon, nitrogen, and nickel. Based on the simulated results, we conclude that a significant part of the heat-to-heat variability in swelling responses of Fe-based alloys can be driven by impurity content in alloy compositions, and, therefore, chemical control should be a key element in supply chain design for advanced nuclear energy systems. Furthermore, we provide critical recommendations on best practices for evaluating and reporting helium production and lattice damage rates when computing predictions with multiphysics programs such as FISPACT-II.

FISPACT-II↗
DOE OSTI2020

Ferromagnetic resonance in single vertices and 2D lattices macro-dipoles of elongated nanoelements: measurements and simulations

We report broadband ferromagnetic resonance measurements of the in-plane magnetic field response of three- and four-fold symmetric vertices formed by non-contacting permalloy nano-ellipses together with extended lattices constructed from them. Complementing the experimental data with simulations, we are able to show that, as far as the most intense FMR responses are concerned, the spectra of vertices and lattices can largely be interpreted in terms of a superposition of the underlying hysteretic responses of the individual ellipses, as elemental building blocks of the system. Here, this property suggest that it is possible to understand the orientation of the individual magnetic dipole moments in a dipole network in terms of dynamic measurements alone, thereby offering a powerful tool to analyze the alignment statistics in frustrated systems that are exposed to various magnetic histories.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Mechanistic Insights into Copper(I) and Copper(II) Cation Exchange Reactions in CdSe Nanoplatelets

In this study, we investigated the synthesis of copper selenide nanoplatelets (NPLs) through a cation exchange reaction (CER) in 5-monolayer-thick CdSe NPLs using Cu(I) and Cu(II) precursors. We discovered that the exposure of CdSe NPLs to a Cu(I) precursor led to the transformation of NPLs into Cu 2-x Se while maintaining their nanoplatelet morphology. The replacement of Cd(II) with Cu(I) prevailed over the formation of doped structures. In the case of the Cu(II) precursor, we observed that Cu(II) was first reduced to Cu(I) before being intercalated into the host lattice, resulting in the synthesis of Cu 2-x Se, similar to CER with Cu(I) precursors but without preservation of the initial morphology of NPLs. Interestingly, the presence of oxygen was found to facilitate the cation exchange processes in CdSe NPLs, whereas a nitrogen atmosphere suppressed the CER. Further, despite the similar ionic sizes of Cu(I) and Cu(II), the substitution of Cd(II) with Cu(II) was found to be challenging, possibly due to the involvement of redox processes resulting in the significant deterioration of initial CdSe NPLs. We demonstrate that CER can achieve near-complete substitution of cadmium atoms with monovalent copper at room temperature. Understanding the processes involved in CERs is crucial for engineering more complex structures, such as high-entropy nanoparticles involving cation exchange with different oxidation states and development of material synthesis using machine learning and artificial intelligence approaches.

2D nanoplatelets↗
DOE OSTI2021

Radiation-Induced Dark Counts for Silicon Single-Photon Detectors in Space

Single-photon detectors operating on satellites for use in a quantum communications network can incur large dark-count-rate increases from the natural radiation environment of space. Displacement damage to the material lattice of a detector from the ionizing radiation can result in a permanent dark-count increase in the detector. In this work, we analyze the radiation-induced dark-count rate of a silicon single-photon avalanche diode onboard a satellite at different orbiting altitudes, as well as, the additional radiation from a nuclear-disturbed environment caused by a high-altitude nuclear explosion. For detectors on low Earth orbit satellites, protons are the biggest source of radiation damage and are best mitigated by choosing an orbit that minimizes exposure when passing through the South Atlantic Anomaly and Polar Cusps. Detectors on medium Earth orbit and geostationary orbit satellites, if shielded by more than 10 mm of aluminum, provide the best platform in terms of the least amount of radiation damage to the detectors. In the event of a high-altitude nuclear explosion, the artificial radiation belts produced by the explosion will cause too much damage to silicon single-photon detectors on low Earth orbit satellites and render them unfit for quantum communications in less than a day. Higher orbit satellites will only suffer minor dark-count-rate increases from the artificial radiation belts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Crystal Symmetry Engineering in Epitaxial Perovskite Superlattices

Interface plays a critical role in determining the physical properties and device performance of heterostructures. Traditionally, lattice mismatch, resulting from the different lattice constants of the heterostructure, can induce epitaxial strain. Over past decades, strain engineering has been demonstrated as a useful strategy to manipulate the functionalities of the interface. However, mismatch of crystal symmetry at the interface is relatively less studied due to the difficulty of atomically structural characterization, particularly for the epitaxy of low symmetry correlated materials on the high symmetry substrates. Overlooking those phenomena restrict the understanding of the intrinsic properties of the as- determined heterostructure, resulting in some long-standing debates including the origin of magnetic and ferroelectric dead layers. Here, perovskite LaCoO 3 -SrTiO 3 superlattice (SL) is used as a model system to show that the crystal symmetry effect can be isolated by the existing interface strain. Combining the state-of-art diffraction and electron microscopy, it is found that the symmetry mismatch of LaCoO 3 -SrTiO 3 SL can be tuned by manipulating the SrTiO 3 layer thickness to artificially control the magnetic properties. Furthermore, the work suggests that crystal symmetry mismatch can also be designed and engineered to act as an effective strategy to generate functional properties of perovskite oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Programmable hyperbolic polaritons in van der Waals semiconductors

Lighting a route for hyperbolic dispersion The propagation of light within a material is usually well defined, with the propagation described by scattering and dispersion. In artificially designed metamaterials and in anisotropic layered materials, the dispersion can be hyperbolic, giving rise to subwavelength confinement of the light. Sternbach et al. show that the hyperbolic dispersion can be optically switched on and off on demand in the layered transition metal dichalcogenide tungsten diselenide (see the Perspective by Deng and Chen). Illuminating the material with ultrafast pulses of sub-bandgap light creates a transient waveguide, resulting in hyperbolic dispersion in the material. The ability to tune the dispersion characteristics on demand using optical pumping is an effective approach for developing ultrafast switching photonic devices and controlling the propagation of light on the nanoscale. Science , this issue p. 617 ; see also p. 572

Science & Technology - Other Topics↗
DOE OSTI2020

Phase behavior of continuous-space systems: A supervised machine learning approach

The phase behavior of complex fluids is a challenging problem for molecular simulations. Supervised machine learning (ML) methods have shown potential for identifying the phase boundaries of lattice models. In this work, we extend these ML methods to continuous-space systems. We propose a convolutional neural network model that utilizes grid-interpolated coordinates of molecules as input data of ML and optimizes the search for phase transitions with different filter sizes. We test the method for the phase diagram of two off-lattice models, namely, the Widom–Rowlinson model and a symmetric freely jointed polymer blend, for which results are available from standard molecular simulations techniques. The ML results show good agreement with results of previous simulation studies with the added advantage that there is no critical slowing down. We find that understanding intermediate structures near a phase transition and including them in the training set is important to obtain the phase boundary near the critical point. The method is quite general and easy to implement and could find wide application to study the phase behavior of complex fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Machine Learning-Accelerated First-Principles Molecular Dynamics Explains Anomalous Lattice Thermal Expansion in BaZr 0.78 Y 0.22 O 3-δ

Fuel cells are a vital clean energy technology that converts chemical energy directly into electricity with high efficiency, making them a cornerstone of a sustainable energy future. Herein we investigate the thermal and chemical lattice expansion behavior of hydrated BaZr 0.78 Y 0.22 O 3-δ using machine learning-accelerated ab initio molecular dynamics simulations. Here, our results reproduce the experimentally observed non-monotonic and anomalous temperature dependence of lattice expansion, which we attribute to the competing effects of thermal expansion and dehydration—two mechanisms that influence the lattice expansion in opposite directions. The importance of this work lies in its detailed demonstration of how advanced computational techniques can accurately capture complex environmental effects, providing a valuable framework for modeling similar phenomena in a variety of material systems and applications.

Proton conducting fuel cell↗
DOE OSTI2026

Mechanistic implications of excited high-spin states, spin–spin coupling, and differential [2Fe–2S] + cluster temperature relaxations in the electron-bifurcating NfnABC from Thermococcus sibiricus

Electron bifurcation (EB) is a mechanism of biological energy transduction in which multiple oxidation–reduction (redox) reactions are thermodynamically coupled within a single enzyme, enabling the enzyme to harness the excess free energy from an exergonic process to drive an endergonic process. Because of this unprecedented chemistry, there is interest to translate EB principles to artificial and bioengineered systems, but a hurdle is that knowledge pertaining to the fundamental design principles of EB enzymes remains scarce. Here, we investigated the fundamental physical and electronic properties of electron transfer sites in a spectroscopically uncharacterized member of the BfuABC family of EB enzymes, the NADH-dependent reduced-ferredoxin:NADP + oxidoreductase from Thermococcus sibiricus (Tsi NfnABC). Cryo-EM structures of Tsi NfnABC previously demonstrated that it contains twelve redox cofactors: two flavins (one FAD and one FMN), eight [4Fe–4S] clusters, and two [2Fe–2S] clusters. The FMN, one [4Fe–4S] cluster, and one [2Fe–2S] cluster comprise the bifurcating active site termed the electron-bifurcating flavobicluster (BF-FBC), which is found in all BfuABC family members. By using electron paramagnetic resonance spectroscopy, we identified spectral signatures originating from interactions between the FMN radical and [4Fe–4S] + cluster in the BF-FBC and observed temperature dependent behavior of the BF-FBC's [2Fe–2S] + cluster indicative of moderately slow spin–lattice relaxation. Additionally, we uncovered numerous spectral features corresponding to half-integer, S > ½ spin states of [4Fe–4S] + clusters, including one attributable to the consequences of lysine-ligation of a [4Fe–4S] cluster unique to NfnABC. We contextualize these findings to electron transfer theory and NfnABC's structure. Our insights further the understanding of how enzymes are designed to exert control over electron transfer to conduct thermodynamically challenging reactions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Optimizing temperature distributions for training neural quantum states using parallel tempering

Parametrized artificial neural networks (ANNs) can be very expressive ansatzes for variational algorithms, reaching state-of-the-art energies on many quantum many-body Hamiltonians. Nevertheless, the training of the ANN can be slow and stymied by the presence of local minima in the parameter landscape. One approach to mitigate this issue is to use parallel tempering methods, and in this work, we focus on the role played by the temperature distribution of the parallel tempering replicas. Using an adaptive method that adjusts the temperatures in order to equate the exchange probability between neighboring replicas, we show that this temperature optimization can significantly increase the success rate of the variational algorithm with negligible computational cost by eliminating bottlenecks in the replicas' random walk. Furthermore, we demonstrate this using two different neural networks, a restricted Boltzmann machine and a feedforward network, which we use to study a toy problem based on a permutation invariant Hamiltonian with a pernicious local minimum and the 𝐽 1 −𝐽 2 model on a rectangular lattice.

Neural network simulations↗
DOE OSTI2023

Phonon-informed Neural Thermal Scattering (NeTS) Optimization for Crystalline Graphite and Beryllium Metal

Fast neutrons born from fission lose energy through scattering interactions in the process of slowing-down. As neutrons thermalize to the order of $k$ $b$ $T$ (where $k$ $b$ is the Boltzmann constant, and $T$ is the temperature of the medium), their de Broglie wavelength and energy approaches the order of inter-atomic spacing and quantized lattice vibrations, i.e., phonons. At thermal energies, the thermal scattering law (TSL), i.e., $S$($α, β$), captures crystal binding contributions to the total reaction rate, or cross section. This dimensionless material property describes the energy ($β$) and momentum ($α$) exchanges available in a medium. Currently, $S$($α, β$) is evaluated in the Full Law Analysis Scattering System Hub (FLASSH) code for discrete inputs and stored as ENDF/B File 7 for 0-phonon elastic (MT 2) and n-phonon inelastic (MT 4) processes. Further processing recasts $S$($α, β$) into cumulative distribution functions for sampling post-collision scattering kinematics. In practice, interpolation schemes are employed to access data between tabulated values. An improvement to this juncture of the nuclear data pipeline is supplying cross sections on-the-fly (OTF), as has been developed for the un-resolved resonance region to minimize non-physical interpolation errors. This capability may improve simulation accuracy for accident and transient analyses, where rapidly varying changes in temperature and pressure are difficult to predict beforehand. To do so, deep artificial neural networks (ANNs) can be employed which collapse non-linear, complex data into a lightweight dictionary of neural weights and biases. This has been successfully demonstrated for the hydrogen in light water $S$($α, β$) dataset in the form of a Neural Thermal Scattering (NeTS) module. In this work, the NeTS framework is extended to consider the impact of material-dependent dynamical features on optimal neural pre-processing and architecture design decisions, such as number of neurons per hidden layer, residual skip connections and neural depth. New NeTS modules for crystalline graphite and beryllium metal illuminate a novel correlation between dynamical nonlinearity and optimal neural parametrization when deploying $S$($α, β$) on-the-fly.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Effect of Controlled Artificial Disorder on the Magnetic Properties of EuFe 2 (As 1– x P x ) 2 Ferromagnetic Superconductor

Static (DC) and dynamic (AC, at 14 MHz and 8 GHz) magnetic susceptibilities of single crystals of a ferromagnetic superconductor, EuFe 2 ( As 1 – x P x ) 2 ( x = 0.23), were measured in pristine state and after different doses of 2.5 MeV electron or 3.5 MeV proton irradiation. The superconducting transition temperature, T c ( H ) , shows an extraordinarily large decrease. It starts at T c ( H = 0 ) ≈ 24 K in the pristine sample for both AC and DC measurements, but moves to almost half of that value after moderate irradiation dose. Remarkably, after the irradiation not only T c moves significantly below the FM transition, its values differ drastically for measurements at different frequencies, ≈16 K in AC measurements and ≈12 K in a DC regime. We attribute such a large difference in T c to the appearance of the spontaneous internal magnetic field below the FM transition, so that the superconductivity develops directly into the mixed spontaneous vortex-antivortex state where the onset of diamagnetism is known to be frequency-dependent. We also examined the response to the applied DC magnetic fields and studied the annealing of irradiated samples, which almost completely restores the superconducting transition. Overall, our results suggest that in EuFe 2 ( As 1 – x P x ) 2 superconductivity is affected by local-moment ferromagnetism mostly via the spontaneous internal magnetic fields induced by the FM subsystem. Another mechanism is revealed upon irradiation where magnetic defects created in ordered Eu 2 + lattice act as efficient pairbreakers leading to a significant T c reduction upon irradiation compared to other 122 compounds. On the other hand, the exchange interactions seem to be weakly screened by the superconducting phase leading to a modest increase of T m (less than 1 K) after the irradiation drives T c to below T m . Our results suggest that FM and SC phases coexist microscopically in the same volume.

36 MATERIALS SCIENCE↗