Search NASA⌕ Search

SEARCH · Search NASA

Results for “asymmetric unit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Electrostatic Gating of Ionic Conductance through Heterogeneous van der Waals Nanopores

Nanofluidic ionic transistors typically require gate voltages above 1 V and operate only at submillimolar ionic strengths, limiting their biocompatible applications. We demonstrate ionic transistors consisting of single sub-10 nm nanopores drilled in van der Waals (vdW) heterostructures with internal gate electrodes made of few-layer graphene. These devices deliver up to 10-fold current modulation at gate voltages as low as 0.3 V in 10 mM KCl, and ∼2-fold modulation at near-physiological 100 mM KCl. Baseline conductance with no gate shows surface-charge-dominated transport below 100 mM KCl, consistent with negatively charged hBN walls and ∼5 nm opening of the pores. The surface charge and the electrochemical asymmetry introduced by the three-electrode configuration govern the device’s behavior: negative gate voltage (V G ) enriches ionic concentrations and enhances current, whereas positive V G induces a local depletion zone that suppresses transport. The current modulation by V G is dependent on the polarity of the transmembrane potential and leads to ion current rectification. Molecular dynamics simulations of a nanopore in a hBN–graphene–hBN stack reveal confinement and surface charge-dependent suppression of the relative permittivity of interfacial water. Continuum modeling with radially varying interfacial water permittivity reproduces the asymmetric I–V characteristics and explains how the embedded gate sculpts local potential and ion concentrations. By enabling sub-0.5 V control of ionic transport at up to 100 mM salt concentrations, these devices address a key need in nanofluidics to create low-power ionic circuits and biosensing.

Materials science↗
DOE OSTI2026

Capturing Secondary Kinetic Instabilities in Three‐Dimensional Dayside Reconnection Using an Improved Gradient‐Based Closure

Magnetic reconnection is a highly dynamic process that excites a wide variety of kinetic waves and instabilities. Transverse current sheet instabilities such as the lower-hybrid drift and secondary drift-kink instabilities in particular have been shown by kinetic simulations to modify the reconnection and introduce significant turbulence and mixing to the reconnection layer. Past studies using the ten-moment fluid model to capture important kinetic physics such as the electron inertia and full representation of the pressure tensor proved advantageous to a two-fluid representation of reconnection, but the model struggled when using a local relaxation closure for the heat flux to replicate the current sheet instabilities and subsequent mixing seen in kinetic simulations. This work uses the Gkeyll software framework to perform simulations of asymmetric reconnection based on the 16 October 2015 MMS crossing of a diffusion region, the Burch event. An improved gradient-based heat flux closure is implemented, showing significant improvement in secondary kinetic instabilities that grow in the current sheet. These instabilities generate turbulence which leads to growth of secondary magnetic islands and flux ropes.

Bradshaw, K. [Princeton University, NJ (United Sta↗
DOE OSTI2026

Studying f-Electron Contributions in Thorium and Uranium Containing Molecules

The pure rotational spectra of several actinide-containing compounds have been improved upon and, in two cases, been recorded for the first time. The diatomic molecules HfS and ThS have been studied in their ground electronic states but high vibrationally excited states. The results have yielded very accurate locations of the minima of the potential energy curves. The asymmetric molecules OThS and UO2S have been prepared by laser ablation synthesis and their pure rotational spectra recorded for the first time. Precise information pertinent to the geometric and electronic structure of these molecules has been obtained and is compared with other, newly recorded and related species such as OCeS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Photothermoelectric effect in cadmium arsenide thin films for unbiased, mid-infrared photodetection

Mid-infrared photodetectors that can operate at room temperature are of great interest for a wide range of applications. Here, we demonstrate unbiased, mid-infrared (10.4 μm) photodetection in epitaxial thin films of the three-dimensional Dirac semimetal cadmium arsenide (Cd 3 As 2 ), which are grown on a III–V heterostructure. We show that the photocurrent response of planar metal–Cd 3 As 2 –metal devices is consistent with the photothermoelectric effect, which is due to a temperature gradient that develops under asymmetric illumination of the device. We show that the photoresponsivity of Cd 3 As 2 channel devices is an order of magnitude greater than devices with a III–V semiconductor channel, attesting to the excellent thermoelectric properties of Cd 3 As 2 and promising efficient unbiased, room-temperature mid-infrared photodetection.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Impact of toroidal magnetic field direction on integrated ELM-stable operation and divertor power exhaust via boron powder injection in EAST

We report the first in-depth comparison of the impact of toroidal magnetic field direction on solid boron injection used for Edge-Localized Mode (ELM) control, power exhaust, and core high-Z impurity control in the Experimental Advanced Superconducting Tokamak. With favorable ion ∇B drift towards the upper X-point in an upper-single-null configuration, boron injection effectively suppresses ELMs, produces a detachment of the inner divertor target, and leads to improved energy confinement. ELM suppression in this configuration is accompanied by the excitation of an Edge Harmonic Mode. In contrast, with unfavorable ion ∇B drift away from the upper X-point, boron injection also suppresses ELMs but leads to a more symmetric detachment state of both the inner and outer divertor targets, while plasma energy confinement is slightly degraded despite similar boron injection levels; a different low-frequency coherent mode without multiple harmonics is observed. Measurements from toroidally separated views show that the divertor response to boron injection is essentially toroidally symmetric, supporting the use of two-dimensional SOLPS-ITER modeling with a toroidally uniform impurity source. These experimental observations are qualitatively consistent with SOLPS-ITER simulations, which highlight the critical role of E × B drift effects in setting the Bt-dependent in–out asymmetry of detachment and in asymmetrically transporting particles and injected impurities within the scrape-off layer and private-flux region. These findings underscore the importance of drift physics and real-time wall conditioning in controlling low-Z impurity transport and optimizing edge solutions for integrated, ELM-stable, high-performance tokamak operation.

E × B drift↗
DOE OSTI2026

Dual-RF Phase Control for Adiabatic Energy Ramping in the EIC Rapid Cycling Synchrotron

The Electron-Ion Collider (EIC) Rapid Cycling Synchrotron (RCS) accelerates electrons from 750 MeV to 10 GeV over approximately 64.7 ms. While the baseline design simultaneously ramps both RF voltage and phase, this study evaluates an alternative where RF cavities are divided into two groups, each operating at a fixed 6.5 MV, with the effective voltage synthesized through phase control. In the symmetric scheme (Option A), both groups vary symmetrically about the synchronous phase to provide exact matching of energy gain and synchrotron tune throughout the ramp. Conversely, the asymmetric scheme (Option B) pins one group at the final operating phase while the other varies to supply the required energy gain. The feasibility of Option B is determined by the adiabaticity of the resulting synchrotron tune evolution, with ramp profiles, phase trajectories, and adiabaticity metrics analyzed for both implementations.

Gamage, B. [Thomas Jefferson National Accelerator ↗
DOE OSTI2020

Microphase Separation in Polyelectrolyte Blends: Weak Segregation Theory and Relation to Nuclear "Pasta".

We develop the weak segregation theory of micro phase separation in stoichiometric blends of oppositely and weakly charged polyelectrolytes, which would be immiscible in the absence of charged units. Short-range repulsions between polycation and polyanion monomers induce the formation of oppositely charged domains, the size of which is controlled by their excess Coulomb energy. The diagram of blend morphologies is constructed in the framework of Leibler's mean-field approach and to account for fluctuations within the Brazovskii-Fredrickson-Helfand approximation. Phase behavior of the polyelectrolyte blends is fully analogous to that of neutral diblock copolymers. The mean-field analysis predicts that the order-disorder transition (ODT) is second order for the symmetric blend. In asymmetric mixtures, an increasing incompatibility between polyelectrolytes triggers the usual cascade of first-order phase transitions, dis -> bcc -> hex -> lam. Fluctuations alter the phase diagram topology and allow the direct transitions from the disordered state (dis) to hex and lam microphases; for the symmetric blend, ODT becomes weakly first order. We also discuss that both microphase separation in polyelectrolyte blends and the formation of nuclear "pasta" phases within neutron stars are governed by similar physical principles, despite the 6 orders of magnitude difference in the periods of these structures.

Rumyantsev, Artem M.↗
DOE OSTI2025

Sparse optimization of two-dimensional terahertz spectroscopy

Two-dimensional terahertz spectroscopy (2DTS) is a low-frequency analog of two-dimensional optical spectroscopy that is rapidly maturing as a probe of a wide variety of condensed matter systems. However, a persistent problem with 2DTS is the long experimental acquisition times, which prevent its broader adoption. A potential solution, requiring no increase in experimental complexity, is signal reconstruction via compressive sensing. In this work, we apply the sparse exponential mode analysis (SEMA) technique to 2DTS of a cuprate superconductor. We benchmark the performance of the algorithm in reconstructing terahertz nonlinearities and find that SEMA reproduces the asymmetric photon echo line shapes at sampling rates as low as 10%, reaching the reconstruction noise floor at sampling rates beyond 20%–30%. The success of SEMA in reproducing such subtle, asymmetric line shapes confirms compressive sensing as a general method to accelerate 2DTS and multidimensional spectroscopies more broadly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Ambient Synthesis for Fe(II) Polypyridyl Complexes with an Order of Magnitude Increase in Charge-Transfer Excited-State Lifetimes over [Fe(bpy) 3 ] 2+

Replacing precious metals with abundant metals is an important research focus in photochemical energy conversion and storage to meet global energy demands. However, transition metal complexes (TMCs) based on abundant 3d metals typically possess photochemical disadvantages─such as short charge-transfer excited-state lifetimes─and molecular modifications have focused on optimizing the interplay of structure, dynamics, and energetics to overcome their limitations. One strategy to do so is the use of bespoke ligands that can extend the lifetimes of chemically useful excited states. Here, in this study, we report the synthesis and characterization of novel Fe(II) complexes featuring lengthy polypyridyl ligands that can be readily synthesized. Steady-state and transient absorption spectroscopies indicate that these complexes have desirable properties and their excited metal-to-ligand charge-transfer states live an order of magnitude longer than in the benchmark [Fe(bpy) 3 ] 2+ . This lifetime is largely preserved in the heteroleptic complexes, thereby enabling the preparation of asymmetric complexes. Additionally, we apply nonradiative transition theory to explain the long-time decay kinetics. In light of their ease of preparation and reasonable excited-state lifetimes, we suggest the use of these complexes in Fe(II) dye-sensitized solar cells, where the rate of charge injection would be competitive with increased lifetime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Absorbing boundary conditions in material point method adopting perfectly matched layer theory

This study focuses on solving the numerical challenges of imposing absorbing boundary conditions for dynamic simulations in the material point method (MPM). To attenuate elastic waves leaving the computational domain, the current work integrates the Perfectly Matched Layer (PML) theory into the implicit MPM framework. The proposed approach introduces absorbing particles surrounding the computational domain that efficiently absorb outgoing waves and reduce reflections, allowing for accurate modeling of wave propagation and its further impact on geotechnical slope stability analysis. The study also includes several benchmark tests to validate the effectiveness of the proposed method, such as several types of impulse loading and symmetric and asymmetric base shaking. The conducted numerical tests also demonstrate the ability to handle large deformation problems, including the failure of elasto-plastic soils under gravity and dynamic excitations. The findings extend the capability of MPM in simulating continuous analysis of earthquake-induced landslides, from shaking to failure.

58 GEOSCIENCES↗
DOE OSTI2025

(NH 3 (CH 2 ) 7 NH 3 ) 2 Sn 3 I 10 , a Vacancy-Ordered Three-Dimensional Tin(II) Perovskite-Derived Semiconductor

Ordering vacancies in hybrid Sn(II) halide semiconductors provides a strategy for preventing uncontrolled oxidation and formation of mobile holes. In this study, we report the structure and optical and electronic properties of (NH 3 (CH 2 ) 7 NH 3 ) 2 Sn 3 I 10 , a vacancy-ordered perovskite derivative with three-dimensional inorganic connectivity. The crystal structure resembles that of a Dion–Jacobson layered perovskite derivative, but with [SnI 5 ] square pyramids bridging the layers. UV–vis diffuse reflectance spectroscopy reveals a sharp onset of light absorption at 1.86(1) eV with the photoluminescence emission maximum at 1.90(1) eV. However, the maximum excitation occurs from 3.42 to 3.81 eV (325 to 370 nm), revealing a significant Stokes shift of 1.3 eV. The electronic properties determined from dark and time-resolved microwave conductivity measurements reveal a minimum carrier mobility of 4.3 × 10 –2 cm 2 V –1 s –1 and a maximum carrier density of 5.96 × 10 16 cm –3 , a uniquely low value for a hybrid Sn(II) halide semiconductor. The transport behavior in combination with first-principles calculations of the electronic band structure and dielectric permittivity suggest polaron-mediated electronic transport, yet the photogenerated carriers have a fast and fluence-dependent nonradiative recombination rate, suggestive of localized “defect-like” states at the band edge. The observed photoluminescence is most consistent with single-ion-like behavior of an asymmetric Sn(II) environment. Together, these results suggest that defect ordering presents a strategy for the reduction of mobile charge carriers at equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Analysis of strain in ion implanted 4H-SiC by fringes observed in synchrotron X-ray topography

A novel high energy implantation system has been successfully developed to fabricate 4H-SiC superjunction devices for medium and high voltage via implantation of dopant atoms with multi-energies ranging from 13 to 66 MeV. The significantly higher levels of energy used compared to conventional implantation processes, necessitates detailed characterization of the lattice damage caused by implantation. To achieve this by employing the novel high energy system, 4H-SiC wafer with 12 μm epilayers were blanket implanted by 13.8–65.7 MeV Al atoms. The lattice damages induced by the implantation were primarily characterized by Synchrotron X-ray Plane Wave Topography (SXPWT) and Reciprocal Space Mapping (RSM). Topographs reveal fringe contrast akin to multiple asymmetric diffraction peaks with an angular separation of only 2″ (arcseconds) observed on rocking curves, indicating inhomogeneous strain distribution across the implanted layer. The strain profile of the implanted layer was extracted from the fringe contrast by applying Rocking-curve Analysis by Dynamical Simulation (RADS). In conclusion, the maximum strain value is similar to that measured on the RSM.

A1. Characterization↗
DOE OSTI2020

Forced Patterns of Sea Level Rise in the Community Earth System Model Large Ensemble From 1920 to 2100

To provide context for observed sea level rise, the forced response (FR) in dynamic sea level (DSL) during the 20th and 21st centuries is examined in the Community Earth System Model Large Ensemble (LE). After accounting for simulation drift, which in the LE is sizable, the DSL FR is found to be complex, both in space and time. Its evolving character is suggested to arise from both the diversity and transient evolution of climate forcing agents and the slow adjustment timescales of the intermediate and deep oceans. Nonetheless, various intervals of spatially coherent change simulated for the recent past and near future are identified, and their characteristics and associated driving mechanisms are identified and discussed. The mid- to late-20th century DSL FR is characterized by an hemispherically asymmetric pattern of change, with depressed rates of rise in the northern oceans. There is also a dipole of change in the Southern Ocean caused by changes in near-surface zonal winds. Through the late 20th and early 21st centuries, a different pattern of rise emerges with elevated rates in the tropics and depressed rates at high latitudes. Zonal and interbasin variations characterize both intervals and involve the pattern and depth of anomalous ocean heat content storage and spatial contrasts in the expansion coefficient tied mainly to base state temperature, with greater rates of rise in warm regions per unit warming. Finally, the relative roles of surface flux and ocean convergence anomalies are examined.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Combining geometric-optical and spectral invariants theories for modeling canopy fluorescence anisotropy

The spectral invariants theory ( p -theory) has received much attention in the field of quantitative remote sensing over the past few decades and has been adopted for modeling of canopy solar-induced chlorophyll fluorescence (SIF). However, the spectral invariant properties (SIP) in simple analytical formulae have not been applied for modeling canopy fluorescence anisotropy primarily because they are parameterized in terms of leaf total scattering, which precludes the differentiation between forward and backward leaf SIF emissions. In this study, we have developed the canopy-SIP SIF model by combining geometric-optical (GO) theory to account for asymmetric leaf SIF forward and backward emissions at the first-order scattering and by modeling multiple scattering based on the p-theory, thus avoiding the dependence on radiative transfer models. The applicability of the model simulations especially over 3D heterogeneous canopies was improved by incorporating canopy structure through multi-angular clumping index, and by modeling single scattering from the four components of the scene in view according to the GO approach. The results show good consistency with both the state-of-the-art SIF models and multi-angular field SIF observations over grass and chickpea canopies. Further, the coefficient of determination (R²) between the simulated SIF and field measurements was 0.75 (red) and 0.74 (far-red) for chickpea, and 0.65 (both red and far-red) for grass. The average relative error was approximately 3% for 1D homogeneous scenes when comparing the canopy-SIP SIF model simulations to the SCOPE model simulations, and around 4% for the 3D heterogeneous scene when comparing to the LESS model simulations. The results indicate that the proposed approach for separating asymmetric leaf SIF emissions is a robust way to keep a balance between satisfactory simulation accuracy and efficiency. Model simulations suggest that neglecting the leaf SIF asymmetry can lead to an underestimation of canopy red SIF by 6.3% to 42.6% for various leaf biochemical and canopy structural parameters. This study presents a simple but efficient analytical approach for canopy fluorescence modeling, with potential for large-scale canopy fluorescence simulations.

3D heterogeneous structure↗
DOE OSTI2025

Atwood effects on nonlocality of the scalar transport closure in Rayleigh-Taylor mixing

The importance of nonlocality is assessed in modeling mean scalar transport for turbulent Rayleigh-Taylor (RT) mixing at different Atwood numbers. Building on the two-dimensional incompressible work of Lavacot et al. [J. Fluid Mech. 985, A47 (2024)], the present work extends the macroscopic forcing method to variable density problems in three-dimensional space to measure moments of the generalized eddy diffusivity kernel in RT mixing for increasing Atwood numbers (𝐴 = 0.05, 0.3, 0.5, 0.8). It is found that as 𝐴 increases, (1) the eddy diffusivity moments become asymmetric and (2) the higher-order eddy diffusivity moments become larger relative to the leading-order diffusivity, indicating that nonlocality becomes more important at higher 𝐴. There is a particularly strong temporal nonlocality at higher 𝐴, suggesting stronger history effects. In conclusion, the implications of these findings for closure modeling for finite-Atwood RT are discussed.

general physics↗
DOE OSTI2025

Investigating the weak charge of 48 Ca using a dispersive optical model

A new nonlocal dispersive-optical-model analysis has been carried out for neutrons and protons in 48 Ca that reproduces the weak-form-factor measurement of CREX. In addition to elastic-scattering angular distributions, total and reaction cross sections, single-particle energies, the neutron and proton numbers, and the charge distribution, the CREX-measured weak form factor has been fit to extract the neutron and proton self-energies both above and below the Fermi energy. The resulting single-particle propagators yield a weak form factor of F w = 0.125 ± 0.05 and a neutron skin of R skin = 0.152 ± 0.05 fm, in good agreement with CREX. The rearrangement of the neutron distribution to accommodate such a thin neutron skin results in the high-momentum content of the neutrons exceeding that of the protons, in contrast to what is expected from high-energy two-nucleon knockout measurements by the CLAS collaboration and ab initio asymmetric matter calculations. The present analysis also emphasizes the importance of neutron experimental data in constraining weak charge observables necessary for a precise description of neutron densities. Notably, the neutron reaction cross section and further parity-violating experiments weak form factor measurements are essential to generate a unique way to determine the 48 Ca neutron distribution in this framework.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Surface Carboxylate Sensitivity to Electron and Hole Relaxation in Photoexcited Cadmium Sulfide Nanocrystals

Understanding how passivating surface ligands couple to excitonic states in nanocrystal photocatalysts is crucial for controlling nonradiative relaxation pathways which compete with interfacial charge transfer. Here, we report femtosecond transient infrared (IR) spectroscopy to resolve ∼100 fs ligand-exciton coupling between 1S exciton states in oleate-capped cadmium sulfide (CdS) nanocrystals and vibrational modes of surface carboxylates. Differential mid-IR spectra show distinct negative amplitude and positive photoinduced absorption signals at ∼1540 cm –1 (carboxylate asymmetric stretch) and ∼1440 cm –1 (carboxylate symmetric stretch), respectively. Fluence-dependent transient IR measurements reveal that the symmetric stretch is uniquely sensitive to picosecond Auger recombination, while the asymmetric stretch shows no analogous decay. Our results provide direct measurement of femtosecond ligand-exciton coupling in CdS nanocrystals and demonstrate how surface-bound carboxylate ligands serve as carrier-specific reporters of nanocrystal photophysics. Furthermore, these findings offer critical insights for designing and developing predictive models for ligand-mediated strategies in next-generation nanocrystal photocatalysts.

Cadmium sulfide↗
DOE OSTI2021

Estimating the Rebound Effect of the U.S. Road Freight Transport

The United States (U.S.) road freight sector has continued to grow over recent decades. Growth in road freight could result in more fuel consumption and hence increased greenhouse gas emissions. Policymakers have attempted to manage the growth of energy usage through improved fuel economy based on technological advances. However, such improvements may not lead to anticipated goals because of the rebound effect, where improvements in energy efficiency trigger more travel and energy consumption that offsets energy savings. Thus, this study aims to determine the potential rebound effect from improved energy efficiency in the U.S. road freight sector. Eight fuel cost models are applied and asymmetric price response is incorporated in estimating the U.S. road freight sector’s rebound effect from 1980 to 2016. In addition, a recently developed data envelopment analysis is applied to determine the annual rebound effect in the road freight sector. The results suggest that, after accounting for the asymmetric price response, the average rebound effect of the U.S. road freight sector ranges from 6.9% to 8.8%, a level considerably less than that found for several industrialized countries and emerging economies. However, a considerable increase in the rebound effect has been seen in more recent years. Here, the findings suggest that overlooking the rebound effect in environmental policies could impede the goal of reducing total energy consumption and accompanying emissions. Policymakers should incorporate the rebound effect from efficiency enhancement in policy development and utilize some potential programs to reduce the adverse influence of rebound effect in related policies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗