Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic manipulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Tailoring composition and deformation modes at the microstructural level for next generation low-cost high-strength austenitic stainless steels

The objective of this project is to enable deliberate development of cost-effective, hydrogen resistant alloys by establishing detailed relationships specific to the effects of alloy composition, short-range order (SRO), and microsegregation in the presence of hydrogen on the transition between homogeneous deformation and localized plasticity in shear bands. In collaboration with the International Institute for Carbon-Neutral Energy Research, I2CNER, at Kyushu University in Japan, we conceptualized, designed, and manufactured four austenitic alloys that maintain corrosion resistance and ensure lower cost relative to baseline commercial alloys. The mechanical properties and deformation modes of the novel alloys (KU alloys) were assessed in the presence of hydrogen (H). Correlations between composition and performance revealed that two of the KU alloys are suitable replacements for 316 steel, while another is a viable replacement for 304 steel at room temperature. We found that, in the presence of other austenite stabilizing elements namely Mn and N, replacing Ni with Cu does not lead to martensite formation as has been previously reported.1–3 Furthermore, we found that the addition of Cu leads to an earlier onset of multiple slip resulting in an relative earlier onset of a higher work hardening rate (WHR). Greater understanding of the relationships between alloy composition and SRO required the development of a novel advanced electron diffraction methodology to characterize SRO in complex FCC alloys. This innovative approach, which combines fluctuation and correlation analyses of diffuse-scattering signals, successfully differentiated between SRO and long-range ordering (LRO). Further investigations into annealed austenitic stainless steels could provide insights into manipulating SRO and its effects on material properties. Atomistic simulations provided understanding of SRO behavior that was difficult to capture experimentally. This project created the first spin cluster expansion model that is able to capture and describe SRO effects in Fe-Ni-Cr FCC alloys, accounting for the non-negligible effects of magnetism. An automated computational workflow was established to provide reliable predictions of SRO in Fe-Ni-Cr austenitic alloys, both with and without the presence of H atoms. Analysis of the propensity for SRO in Fe-Ni-Cr alloys revealed that H tends to cluster with specific, well-defined SRO domains. The computational framework is general purpose and can be extended to realistic stainless steels across diverse composition ranges. With confidence that SRO is possible in austenitic stainless steels, we developed a discrete dislocation finite element code to understand the interaction of dislocations with SRO in the presence of H. By incorporating H effects on the dislocation emission and SRO stress field we show that the critical stress for the dislocation pileup to breakthrough the SRO domain decreases in the presence of H, which directly contributes localized deformation at the macroscale. Through the simulation of a uniaxial tension test, we demonstrated that H-induced weakening of SRO stress field and H-enhanced dislocation emission can lead to the onset of shear localization at lower macroscopic strains. As a whole, this project identified three novel alloys that show improvements in performance and cost efficiency for H-facing applications by studying correlations between alloy chemistry and deformation behavior. We also made significant advancements to experimental and computational methodologies necessary to study the chemistry and distribution of SRO across a range of alloys, which in turn allowed us to demonstrate how deformation mechanisms change due to the contributions of SRO in austenitic alloys in the presence of H. The combined advancements in fundamental understanding with novel alloy development in this project has increased the viability of next generation H-technologies for the broader public through accessible low-cost alloys and accelerated development towards future H-infrastructure.

08 HYDROGEN↗
DOE OSTI2025

To Substitute Rather Than Intercalate: Chimie douce Approach to Induce Ferromagnetism in Metastable Pt 0.8 M 0.2 Se 2 ( M = Cr, Co, Ni)

Two-dimensional (2D) magnetic materials with exotic magnetic properties have garnered significant interest due to their potential applications in spintronics and data storage technologies. However, the limited availability of intrinsic 2D magnetic materials has driven efforts to induce and manipulate magnetism in otherwise nonmagnetic 2D systems through approaches such as chemical intercalation, defect engineering, and substitutional doping. Herein, we present a facile, chimie douce method for incorporating 3d transition metals (Cr, Co, and Ni) into the nonmagnetic PtSe 2 sublattice. This synthetic approach enables control over layer thickness of Pt 1–x M x Se 2 (M = Cr, Co, Ni) nanosheets by varying the M identity and annealing conditions. Comprehensive scattering and spectroscopic characterizations confirm the successful and homogeneous substitution of M atoms at the Pt site, rather than intercalation, and reveal a strong correlation between nanosheet thickness and the identity of the substituting metal. High-temperature annealing of the nanosheets promotes an irreversible transformation toward the bulk phase, allowing for detailed characterization of structural and magnetic properties. A case study of Pt 0.8 Cr 0.2 Se 2 reveals that nanosheet thickness plays a critical role in modulating local magnetic interactions. While Cr atoms in the as-synthesized few-layers-thick nanosheets exhibit predominantly short-range antiferromagnetic interactions, the emergence of short-range ferromagnetic exchange is revealed in the bulk material. Detailed ac susceptibility and remanent magnetization measurements further demonstrate that bulk Pt 0.8 Cr 0.2 Se 2 adopts a frustrated magnetic ground state with clear signatures of ferromagnetic cluster-glass behavior. The systematic investigation presented herein establishes a clear and robust protocol for the synthesis and in-depth characterization of 2D transition-metal-substituted PtSe2 materials with varying layer thickness and paves a path toward their realization in spintronic and magnetic device applications.

crystallinity↗
DOE OSTI2024

AI for Nuclear Safeguards Verification

The International Atomic Energy Agency (IAEA) utilizes AI/ML to analyze open-source information, including satellite imagery and scientific publications, to verify the completeness of State declarations regarding nuclear activities. AI/ML already assist the IAEA with automating processes and analysis of large datasets, including satellite imagery and unstructured data, improving efficiency and effectiveness of safeguards implementation. AI/ML in nuclear safeguards come with its own challenges that include the need for large, unbiased datasets, the risk of AI-generated fake information, including the potential for manipulation of satellite imagery.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Hydration and Restructuring of Polar Polymer Interfaces: Implications in Antifouling and Responsive Materials

Manipulating polymer interfaces is crucial for understanding how structure influences function in applications spanning biofouling prevention to energy storage. Moreover, observing how polymers adapt their microscopic structure to changes in their local environment can reveal essential properties that govern their performance in such applications, providing key insights into how to design more effective interfaces. Here, in this study, a series of “grafting-from” polymer brushes with side chains varying in charge, are probed by sum frequency generation (SFG) and modeled using all-atom molecular dynamics (MD) simulations to elucidate how chemical makeup and charge mediate interfacial restructuring in dry versus hydrated states. Results show that charge, in progressing from nonpolar to cationic to zwitterionic, results in dramatic changes in interfacial structure and overall hydration. While net neutral systems, regardless of bulk phase polarity, show minimal interfacial water structuring, the cationic species exhibits strong bulk water signals from the surface potential. Meanwhile, the polymer brushes themselves restructure in water differently independent of charge, impacting the functional groups that are presented to the aqueous phase. Nonpolar and cationic species for instance undergo a change in alkyl group orientations to accommodate hydrating water molecules, whereas the zwitterionic polymer becomes completely disordered in water. Overall, the structure-based behavior trends presented herein have implications in antifouling applications and responsive material interfaces.

biointerface↗
DOE OSTI2024

Self-Inhibition Phenomena in Cu 3 Pt Oxidation by CO 2

Here, this study investigates the oxidation behavior of Cu 3 Pt(100) in CO 2 using a combination of ambient-pressure X-ray photoelectron spectroscopy, mass spectroscopy, and density functional theory modeling. Our in situ measurements reveal the simultaneous oxidation and reduction of Cu 2 O due to the opposing effects of atomic oxygen and CO generated from dissociative CO 2 adsorption, leading to a dynamic equilibrium state of simultaneously occurring redox reactions. Complementary atomistic calculations elucidate the inhibitory effects of subsurface Pt enrichment and the counteracting roles of CO 2 and CO in surface oxidation and reduction. These results provide mechanistic insights into the dissociative pathway of CO 2 molecules and dynamic evolution of surface composition and reactivity of Cu-based alloy catalysts in CO 2 -rich environments, with broader implications for tuning gas–surface reactions by manipulating gas reactants or solid surface composition.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electronic reconstruction in confined SrRuO 3 monolayers

Here, we report the observation of an electronic reconstruction in dimensionally controlled ruthenate heterostructures synthesized by pulsed laser deposition. High structural and electronic quality of superlattices comprised of a single SrRuO 3 layer inter-spaced with varying thicknesses of insulating SrTiO 3 layers was verified by reflection high energy electron diffraction, atomic force microscopy, x-ray diffraction, reciprocal space mapping, and x-ray absorption spectroscopy. X-ray absorption spectroscopy evidences a confinement-driven evolution of the Ru electronic configuration from the 𝑑 5 $\underline{L}$ to the 𝑑 4 state. Significant increases of the spin-orbit coupling are observed in connection with the configuration changes supporting recent works identifying large enhancement of the magnetic anisotropy. The growth of high quality two-dimensional confined ruthenate layers under precisely controlled environments highlights the potential to directly manipulate interlayer coupling and selectively perturb the electronic state in ruthenates in analogy to superconducting Sr 2 ⁢RuO 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Complete resolution across the neodymium/samarium isotopic envelope with a liquid sampling‐atmospheric pressure glow discharge — Orbitrap mass spectrometer

Rationale Nd and Sm isotope ratios play an important role in geological dating and as nuclear forensic signatures; however, the overlap of the respective 144, 148, 150 Nd/Sm isobars requires prior separations to be performed before analysis on typical MS platforms. The work presented here overcomes these isobaric interferences using ultrahigh‐mass resolution to alleviate interference without prior chemical separations. Methods A liquid sampling‐atmospheric pressure glow discharge ion source was coupled to a standard, QExactive Focus Orbitrap mass spectrometer, providing a mass resolution of ~80 k. A Spectroswiss FTMS booster X2 data acquisition package was used to collect extended transients, providing much higher mass resolution; ~230 k and ~600 k are employed here for Nd and Sm isotopes. Results While the standard Orbitrap resolution is far greater than typical “atomic” MS platforms, it was insufficient to alleviate all isobars. The use of a resolution of ~230 k resulted in baseline separation across the entire isotopic envelope for both Nd and Sm. Isotope ratios obtained from Nd:Sm mixtures using high‐resolution were equivalent to those found for individual‐element solutions, while isotope ratios obtained at a resolution of ~80 k (standard for the OEM data system) showed large deviations. Conclusions Use of ultrahigh‐resolution is an attractive alternative to extensive chemical separations to alleviate severe isobaric interferences. Sufficient mass resolution greatly reduces/eliminates the need for sample manipulations (separations) before analysis while reducing costs and total analysis times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

EVA-SCRAM operations

This paper wrestles with the on-orbit operational challenges introduced by the proposed Space Construction, Repair, and Maintenance (SCRAM) tool kit for Extra-Vehicular Activity (EVA). SCRAM undertakes a new challenging series of on-orbit tasks in support of the near-term Hubble Space Telescope, Extended Duration Orbiter, Long Duration Orbiter, Space Station Freedom, other orbital platforms, and even the future manned Lunar/Mars missions. These new EVA tasks involve welding, brazing, cutting, coating, heat-treating, and cleaning operations. Anticipated near-term EVA-SCRAM applications include construction of fluid lines and structural members, repair of punctures by orbital debris, refurbishment of surfaces eroded by atomic oxygen, and cleaning of optical, solar panel, and high emissivity radiator surfaces which have been degraded by contaminants. Future EVA-SCRAM applications are also examined, involving mass production tasks automated with robotics and artificial intelligence, for construction of large truss, aerobrake, and reactor shadow shield structures. Realistically achieving EVA-SCRAM is examined by addressing manual, teleoperated, semi-automated, and fully-automated operation modes. The operational challenges posed by EVA-SCRAM tasks are reviewed with respect to capabilities of existing and upcoming EVA systems, such as the Extravehicular Mobility Unit, the Shuttle Remote Manipulating System, the Dexterous End Effector, and the Servicing Aid Tool.

Flanigan, Lee A.↗
DOE OSTI2026

Dynamics of iodine geminate recombination in supercritical xenon solvent: Caging effect

Understanding the dynamics of chemical reactions in solutions is vital, as their rates and kinetics are significantly affected by the solvent environment. Supercritical solvents offer extensive applications in chemical reactions by enabling the manipulation of the solution environment. Here, in this study, we investigate the geminate recombination of iodine in a supercritical xenon solvent by using ReaxFF-based molecular dynamics simulations. Our findings reveal that the highest iodine recombination rate occurs near supercritical conditions, while lower-pressure conditions lead to reduced collision rates and unstable recombination, and higher-pressure conditions hinder iodine diffusion, resulting in a lower recombination rate. Our analysis shows that the xenon local density at the time of recombination is at least 2.5 times higher than the global density, confirming the presence of xenon clusters surrounding the Iodine atoms. This observation is further supported by coordination number analysis, which confirms an elevated xenon local density during recombination. In addition, the correlation between the total energy of xenon atoms within a cluster and recombined iodine atoms underscores the kinetic energy transfer process, validating the occurrence of geminate recombination. The excess kinetic energy from the recombining iodine atoms is transferred to the surrounding xenon atoms. Our examination of geminate recombination demonstrates that iodine atoms confined within xenon clusters—whether through manual insertion of atoms or the fast dissociation of an iodine molecule within xenon clusters—are more likely to recombine as primary geminate recombination. However, extending the iodine molecule dissociation time allows iodine atoms to diffuse out of the cluster, and the recombination to shift toward secondary geminate recombination.

Cage effect↗
DOE OSTI2024

Quantum Pair Generation in Nonlinear Metasurfaces with Mixed and Pure Photon Polarizations

Metasurfaces are highly effective at manipulating classical light in the linear regime; however, effectively controlling the polarization of nonclassical light generated from nonlinear resonant metasurfaces remains a challenge. Here, in this study, we present a solution by achieving polarization engineering of frequency-nondegenerate biphotons emitted via spontaneous parametric down-conversion in GaAs metasurfaces, utilizing quasi-bound states in the continuum (qBIC) resonances to enhance biphoton generation. Through comprehensive polarization tomography, we demonstrate that the emitted photons’ polarization directly reflects the qBIC mode’s far-field properties. Furthermore, we show that both the type of qBIC mode and the symmetry of the meta-atoms can be tailored to control each single-photon polarization state, and that the subsequent two-photon polarization states are nearly separable, offering potential applications in the heralded generation of single photons with adjustable polarization. This work provides a significant step toward utilizing metasurfaces to generate quantum light and engineer their polarization, a critical aspect for future quantum technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Efficiently Measuring 𝑑-Wave Pairing and Beyond in Quantum Gas Microscopes

Understanding the mechanism of high-temperature superconductivity is among the most important problems in physics, one for which quantum simulation can provide new insights. However, it remains challenging to characterize superconductivity in existing cold-atom quantum simulation platforms. Here, in this work, we introduce a protocol for measuring a broad class of observables in fermionic quantum gas microscopes, including long-range superconducting pairing correlations (after a repulsive-to-attractive mapping). The protocol only requires global controls followed by site-resolved particle number measurements—capabilities that have been already demonstrated in multiple experiments—and is designed by analyzing the Hilbert space of fermions on two sites. The protocol is sample-efficient and we further optimize our pulses for robustness to experimental imperfections such as lattice inhomogeneity. Our Letter introduces a general tool for manipulating quantum states on optical lattices, enhancing their ability to tackle problems such as high-temperature superconductivity.

Hubbard model↗
DOE OSTI2025

Continuous Encodable Reshaping of Gold Nanocrystals through Facet Modulation

Shape control of nanocrystals (NCs) is crucial for tuning their assembly behavior and functional properties, yet the precise manipulation of facet composition remains challenging. Here, we present a nanocrystal reshaping strategy to control and modulate the facets of gold (Au) NCs. Our one-pot approach, conducted at room temperature, requires only initial Au NCs, Au 3+ ions, and surfactants, distinguishing it from conventional reduction-mediated “etching-and-regrowth” methods. Detailed structural studies using electron microscopy, small-angle X-ray scattering (SAXS), and UV−vis spectroscopy reveal the surfactant-encoded pathway for NC transformation from shaped particles to spheres and then into various polyhedral shapes while preserving the individual particles' volume. The proposed reshaping mechanism involves the dissolution of surface Au atoms into Au + complexes in the presence of Au 3+ and surfactant, followed by surfactant-guided redeposition and formation of facets with different atomic planes. Using the ethanol oxidation reaction (EOR) as a probe, we observe a quasi-linear decrease in onset potential and an increase in activity with increasing {100} facet exposure. This work broadens synthetic strategies by offering precise NC reshaping and facet control.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Erbium-Implanted WS 2 Flakes with Room-Temperature Photon Emission at Telecom Wavelengths

Optically addressable spin impurities in crystals along with device engineering provide an attractive route to realizing quantum technologies in the solid state, but reconciling disparate emitter and host material constraints for a given target application is often challenging. Rare-earth ions in two-dimensional (2D) materials could mitigate this problem given the atomic-like transitions of the emitters and the versatile nature of van der Waals systems. Here we combine ion implantation, confocal microscopy, and ab initio calculations to examine the photon emission of Er-doped WS 2 flakes. Optical spectroscopy reveals narrow, long-lived photoluminescence lines in the telecom band, which we activate after low-temperature thermal annealing. Spectroscopic and polarization-selective measurements show a uniform response across the ensemble, while the fluorescence brightness remains mostly unchanged with temperature, suggesting nonradiative relaxation channels are inefficient. Our results create opportunities for novel solid state devices coupling 2D-hosted, telecom-band emitters to photonic heterostructures separately optimized for photon manipulation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Scanning tunneling microscope tip-induced formation of Bi bilayers on Bi 2 Te 3

We report the formation of Bi(111) bilayer islands and crater structures on Bi 2 Te 3 (111) surfaces induced by voltage pulses from a scanning tunneling microscope tip. Pulses above a threshold voltage (+3 V) produce craters ∼0.5μm in diameter, similar to the size of the tip. Redeposited material self-assembles into a network of atomically ordered islands with a lattice constant identical to the underlying Bi2Te3 surface. The island size monotonically decreases over several micrometers from the pulse site, until the pristine Bi 2 Te 3 surface is recovered. We assign these islands to Bi bilayer based on atomic resolution images, analysis of step heights, and tunneling spectroscopy. Here, the dependence of bilayer formation on bias polarity and the evidence for defect diffusion together suggest a mechanism driven by the interplay of field evaporation and tunneling-current-induced Joule heating.

Bi bilayer↗
DOE OSTI2024

Integrated photonic structures for photon-mediated entanglement of trapped ions

Trapped atomic ions are natural candidates for quantum information processing and have the potential to realize or improve quantum computing, sensing, and networking. These applications often require the collection of individual photons emitted from ions into guided optical modes, in some cases for the production of entanglement between separated ions. Proof-of-principle demonstrations of such photon collection from trapped ions have been performed using high-numerical-aperture lenses or cavities and single-mode fibers, but integrated photonic elements in ion-trap structures offer advantages in scalability and manufacturability over traditional optics. In this paper we analyze structures monolithically fabricated with an ion trap for collecting ion-emitted photons, coupling them into waveguides, and manipulating them via interference. We calculate geometric limitations on collection efficiency for this scheme, simulate a single-layer grating that shows performance comparable to demonstrated free-space optics, and discuss practical fabrication and fidelity considerations. Based on this analysis, we conclude that integrated photonics can support scalable systems of trapped ions that can distribute quantum information via photon-mediated entanglement.

Knollmann, Felix W.↗
DOE OSTI2025

Manipulation of Emergent Collective Excitations via Composition Control in Mixed MPX 3 Correlated 2D Antiferromagnets

Transition metal (i.e., Mn, Fe, Cr) and chalcogen (Se) substituents are introduced into single-crystalline NiPS 3 , and the evolution of the two emergent quasi-particle excitations characteristic to the XXZ correlated antiferromagnetism of NiPS 3 (i.e., spin orbit entangled exciton (SOX) and two-magnon scattering (2M )) are investigated as functions of substituent concentration through comprehensive room- and low-temperature photoluminescence (PL) and Raman spectroscopy studies. These findings are further correlated with the magnetic properties of the same set of compounds reported in prior studies. The work revealed that the SOX emission intensities and linewidths are mainly controlled by the magnetic anisotropy and spin orientations, and are strongly suppressed by the introduction of substituents. The suppression depends on the type of substituent, with Fe affecting the SOX emission more than Mn and Cr. The 2 M scattering is linked to short-range correlations and exhibits greater resiliency against metal atom substitution. While the 2M peak at low temperature gets suppressed and red-shifted in frequency with increasing concentrations of all the substituents, Fe induces the weakest suppression compared to all other substituents. Altogether, these findings revealed the introduction of substituents as a powerful route to control the emergent collective excitations in NiPS 3 and mixed-MPX 3 materials.

2D magnet↗
DOE OSTI2024

Controlling reversible phase transitions in rare-earth nickelates for novel memory devices

Resistive switching in correlated complex oxides is lucrative for emerging applications in neuromorphic computing, and densely scaled non-volatile memory. Electrical conductance of such complex oxides can be controllable switched across multiple orders of magnitude by either (a) electroforming a conduction channel (e.g., in tungsten oxide), or (b) inducing Mott-Hubbard transition (e.g., in rare-earth nickelates)– both via controlled migration of defects (such as oxygen vacancies) under applied bias. Nevertheless, the promise of such defect-driven electronic transitions are far from realized due to a lack of fundamental understanding of the atomic-scale processes that underlie migration and spatiotemporal evolution of oxygen vacancies over nano-to-mesoscopic length/timescales under applied electric field. In this project, we employ a synergistic integration of density functional theory (DFT) calculations, ab initio/classical molecular dynamics (AIMD/CMD) simulations, machine learning (ML), precision synthesis, and multi-modal X-ray imaging experiments to address this knowledge gap. Such an integrated approach offers to elucidate the correlations between subtle structural distortion and oxidation states; treat localized charge carriers; describe defect/ion transport in the presence of electric field; and, in turn, greatly advance the current understanding of microstructural evolution in complex oxides under applied bias. The fundamental knowledge gained from this work will enable precise control over hierarchical defect structures and unravel new routes to manipulate resistance states in complex oxides. This, in turn, will accelerate design of novel devices with desired set of neural functionalities, and high-speed densely-scaled resistive random access memory technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ultrafast Light-Induced Magnetoelectric Effect in van der Waals Magnetic Semiconductor Heterostructures

Atomic-scale heterostructures of van der Waals (vdW) magnets and semiconductors provide a unique environment for exploring magnetic dynamics. In contrast to typical photothermal excitation of precessional magnetization dynamics by a pump laser pulse, we find that ultrafast optical excitation of a WS2/CrGeTe3 (CGT) bilayer produces an opposite sign of magnetic torque compared to an isolated CGT film. Experimental observations by time-resolved magneto-optic Kerr effect (TR-MOKE) and theoretical analysis by density functional theory (DFT) and Landau-Lifshitz-Gilbert (LLG) simulations support a mechanism in which charge transfer of photoexcited carriers across the interface alters the perpendicular magnetic anisotropy, which in turn generates a torque on the magnetic layer to trigger precessional magnetization dynamics. These results provide new avenues for ultrafast manipulation of magnetization in vdW heterostructures with type-II band alignments. Lastly, we show that optically-generated spin currents from WS2 into CGT can also trigger precessional dynamics via angular momentum transfer.

Zhou, Wenyi [The Ohio State University]↗