Search NASA⌕ Search

SEARCH · Search NASA

Results for “bandwidth estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

GPS Altimetry

The advent of satellite altimetry has greatly improved our ability to observe global ocean circulation. However, the swath of a single, nadir-viewing satellite altimeter is only a few km and the track spacing is several hundred km to resolve the two-dimensional structure of ocean eddies. Our goal is to increase spatial and temporal coverage by monitoring Global Positioning System (GPS) signals reflected from the ocean. A constellation of spacecraft would each carry a GPS receiver capable of recording 8 reflections simultaneously. The reflections are well distributed in azimuth and elevation and can be tracked continuously while the satellite is in view, and another is then acquired, as illustrated below. The diagram depicts a new approach at altimetry measurements where ocean surface reflected GPS signals are simultaneously tracked and processed in a GPS flight receiver in space. The reflected GPS signals from the ocean must be compared precisely with the direct GPS signals in order to infer the characteristics of the ocean from the combined data set. Understanding the features and accuracy of GPS altimetry measurement is crucial to establishing its suitability for oceanography. Preliminary work has enabled us to theoretically model the signal output of the correlator for a variety of system parameters such as wind speed (sea roughness), receiver height, incidence angle, receiver range and Doppler filter bandwidth and antenna gain. Expected signal-to-noise ratio has been estimated from which we have inferred, to a first approximation, the basic receiver gain requirements for a space-based altimeter and the expected range raw error. In 1998, work on a different task led to the extraction of the first reflected GPS signal observed from a spaceborne receiver during the 1995 Space Transportation System-68 (STS-68) Shuttle Radar Laboratory-2 (SRL-2) high resolution synthetic aperture radar mission. Good comparisons with our signal models have been obtained. Having established that only modest signal-to-noise ratios are obtainable unless very high gain antennas are used, we expect that single measurements might not provide an estimate of sea state parameters as accurate as that obtainable with traditional remote sensing instruments, if costs are limited. Therefore spatial and temporal averaging of many measurements is required. Since the receiving satellite tracks do not repeat, measurements in a given area will be used to refine the local solution as a function of time, and will define the spatial resolution. In order to make this instrument viable in space, we need to detect and process many scattered signals. In 1998 we made a first step at understanding what configurations of antenna gain and orientations capture the largest number of viable signals to be used in the subsequent spatial/temporal averaging process. Additional information is contained in the original.

Lichten, Stephen M.↗

An AFM Dynamic Contact Model with Finite Thickness Correction to Study Micro-Rheology of Biological Cells

One of the major sources of error in Atomic Force Microscopy based Force Spectroscopic studies is bottom substrate effect, which comes due to assumption of infinite sample thickness. In the present work, anew experimentally validated mathematical correction for finite thickness of thesample is incorporated into a dynamic indentation model. This model is an extension of Sneddon’s static indentation contact model developed for conical tip indenters by incorporating the tip geometric effects, correction to hydrodynamic drag, viscoelastic nature of the sample and its finite thickness. The new model is applied to extract the viscoelastic properties of primary mesenchymal stem cells (MSC’s) extracted from human bone marrow and HCT-116 aggressive epithelial colorectal cancer cells. The micro-rheological studies indicated the presence of profound influence of infinite thickness assumption depending upon indentation depth and sample thickness at the point of indentation. The present model nullified this error and provided a better estimate of the rheological properties. The tests were conducted over a wide frequency bandwidth (0.5 to 126 Hz) and frequency dependent material properties were analyzed using power law structural damping model. It was found that MSC’s are stiffer and less viscous in nature compared to cancer cells.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A phononic interface between a superconducting quantum processor and quantum networked spin memories

We introduce a method for high-fidelity quantum state transduction between a superconducting microwave qubit and the ground state spin system of a solid-state artificial atom, mediated via an acoustic bus connected by piezoelectric transducers. Applied to present-day experimental parameters for superconducting circuit qubits and diamond silicon-vacancy centers in an optimized phononic cavity, we estimate quantum state transduction with fidelity exceeding 99% at a MHz-scale bandwidth. By combining the complementary strengths of superconducting circuit quantum computing and artificial atoms, the hybrid architecture provides high-fidelity qubit gates with long-lived quantum memory, high-fidelity measurement, large qubit number, reconfigurable qubit connectivity, and high-fidelity state and gate teleportation through optical quantum networks.

47 OTHER INSTRUMENTATION↗

Feedback techniques and SPS Ecloud instabilities - design estimates

The SPS at high intensities exhibits transverse single-bunch instabilities with signatures consistent with an Ecloud driven instability. While the SPS has a coupled-bunch transverse feedback system, control of Ecloud driven motion requires a much wider control bandwidth capable of sensing and controlling motion within each bunched beam. This paper draws beam dynamics data from the measurements and simulations of this SPS instability, and estimates system requirements for a feedback system with 2-4 GS/sec. sampling rates to damp Ecloud-driven transverse motion in the SPS at intensities desired for high-current LHC operation.

43 PARTICLE ACCELERATORS↗

Outage probability and average BER estimation of FSO system employing wavelength diversity

Free space optical (FSO) communication has gained significant attention among researchers for high bandwidth and secured data transfer applications. However, its performance is limited by the local atmospheric conditions. This paper focusses on an FSO system employing a diversity method to compensate signal loss occurred due to atmospheric turbulence conditions varying from moderate to strong. We derive a closed-form expression for two important parameters, viz.: average bit error rate (BER) and outage probability over gamma–gamma distribution channel. The numerical results for different combining schemes are presented in this paper. Enhancement in reliability and performance of FSO communication system with wavelength diversity is investigated. Effect of different wavelengths 850 nm, 1310 nm and 1550 nm on average BER is analysed and minimum BER is achieved for optimal combining at 1550 nm at diversity order R=3.

42 ENGINEERING↗

Study of nonlinear interaction between bunched beam and intermediate cavities in a relativistic klystron amplifier

In intermediate cavities of a relativistic klystron amplifier (RKA) driven by intense relativistic electron beam, the equivalent circuit model, which is widely adopted to investigate the interaction between bunched beam and the intermediate cavity in a conventional klystron design, is invalid due to the high gap voltage and the nonlinear beam loading in a RKA. According to Maxwell equations and Lorentz equation, the self-consistent equations for beam-wave interaction in the intermediate cavity are introduced to study the nonlinear interaction between bunched beam and the intermediate cavity in a RKA. Based on the equations, the effects of modulation depth and modulation frequency of the beam on the gap voltage amplitude and its phase are obtained. It is shown that the gap voltage is significantly lower than that estimated by the equivalent circuit model when the beam modulation is high. And the bandwidth becomes wider as the beam modulation depth increases. An S-band high gain relativistic klystron amplifier is designed based on the result. And the corresponding experiment is carried out on the linear transformer driver accelerator. The peak output power has achieved 1.2 GW with an efficiency of 28.6% and a gain of 46 dB in the corresponding experiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Slow-light transmission in one-dimensional periodic structures

We have analyzed the transmission properties of pulses through one-dimensional periodic structures in order to systematically explore the best conditions to achieve the maximum delay with the minimum possible distortion. In the absence of absorption and no layer variation, the transmission coefficient t{sub N} can be well approximated by a sum of Lorentzian resonances. The ratio between their width {Gamma}{sub r} and their separation {Delta}{omega}{sub r} is a crucial parameter to characterize the distortion of the transmitted pulse. For typical values of the parameters used in telecommunications and high index of refraction contrasts n{sub 2}/n{sub 1}, the distortion of the transmitted pulse is unacceptably large for frequencies near the edge of the transmission window. We estimate fractional delays achievables in terms of the central frequency used and the pulse bandwidth.

74 ATOMIC AND MOLECULAR PHYSICS↗

Predictive and Cooperative Voltage Control with Probabilistic Load and Solar Generation Forecasting

This paper proposes predictive cooperative voltage control method in a power system with high penetration of photovoltaic (PV) units. Cooperative distributed control of the reactive power output of PV inverters is coordinated with operation of voltage regulators (VRs) to maintain system voltages within an appropriate bandwidth. Probabilistic forecasting of the solar power generation and the loads is applied to estimate voltage changes which, in turn, are used to set the VR tap positions for preventing large voltage fluctuations with the lowest risk considering the voltage distribution estimation. The fine tuning of voltage adjustment is achieved by cooperative control of PV inverters to maintain a uniform voltage profile across the system. The proposed method is tested on the modified IEEE 123-node test feeder with high PV penetration using real insolation data and with constant loads replaced by several different load profiles. Simulation results demonstrate the effectiveness of the coordinated approach for voltage control with cooperative PV and predictive VR controls taking into account probabilistic load and solar power forecasts.

Cooperative Control↗

THE NANOGRAV NINE-YEAR DATA SET: MONITORING INTERSTELLAR SCATTERING DELAYS

We report on an effort to extract and monitor interstellar scintillation parameters in regular timing observations collected for the North American Nanohertz Observatory for Gravitational Waves pulsar timing array. Scattering delays are measured by creating dynamic spectra for each pulsar and observing epoch of wide-band observations centered near 1500 MHz and carried out at the Green Bank Telescope and the Arecibo Observatory. The ∼800 MHz wide frequency bands imply dramatic changes in scintillation bandwidth across the bandpass, and a stretching routine has been included to account for this scaling. For most of the 10 pulsars for which the scaling has been measured, the bandwidths scale with frequency less steeply than expected for a Kolmogorov medium. We find estimated scattering delay values that vary with time by up to an order of magnitude. The mean measured scattering delays are similar to previously published values and are slightly higher than predicted by interstellar medium models. We investigate the possibility of increasing the timing precision by mitigating timing errors introduced by the scattering delays. For most of the pulsars, the uncertainty in the time of arrival of a single timing point is much larger than the maximum variation of the scattering delay, suggesting that diffractive scintillation remains as only a negligible part of their noise budget.

79 ASTRONOMY AND ASTROPHYSICS↗

Variational methods in simultaneous optimum interpolation and initialization

The duality between optimum interpolation and variational objective analysis, is reviewed. This duality is used to set up a variational approach to objective analysis which uses prior information concerning the atmospheric spectral energy distribution, in the variational problem. In the wind analysis example, the wind field is partitioned into divergent and nondivergent parts, and a control parameter governing the relative energy in the two parts is estimated from the observational data being analyzed by generalized cross validation, along with a bandwidth parameter. A variational approach to combining objective analysis and initialization in a single step is proposed. In a simple example of this approach, data, forecast, and prior information concerning atmospheric energy distribution is combined into a single variational problem. This problem has (at least) one bandwidth parameter, one partitioning parameter governing the relative energy in fast slow modes, and one parameter governing the relative weight to be given to observational and forecast data.

Wahba, G.↗

An adaptive human response mechanism controlling the V/STOL aircraft. Appendix 3: The adaptive control model of a pilot in V/STOL aircraft control loops

Importance of the role of human operator in control systems has led to the particular area of manual control theory. Human describing functions were developed to model human behavior for manual control studies to take advantage of the successful and safe human operations. A single variable approach is presented that can be extended for multi-variable tasks where a low order human response model is used together with its rules, to adapt the model on-line, being capable of responding to the changes in the controlled element dynamics. Basic control theory concepts are used to combine the model, constrained with the physical observations, particularly, for the case of aircraft control. Pilot experience is represented as the initial model parameters. An adaptive root-locus method is presented as the adaptation law of the model where the closed loop bandwidth of the system is to be preserved in a stable manner with the adjustments of the pilot handling qualities which relate the latter to the closed loop bandwidth and damping of the closed loop pilot aircraft combination. A Kalman filter parameter estimator is presented as the controlled element identifier of the adaptive model where any discrepancies of the open loop dynamics from the presented one, are sensed to be compensated.

Kucuk, Senol↗

Electron density power spectrum in the local interstellar medium

Interstellar scintillation (ISS), fluctuations in the amplitude and phase of radio waves caused by scattering in the interstellar medium, is important as a diagnostic of interstellar plasma turbulence. ISS is also of interest because it is noise for other radio astronomical observations. The unifying concern is the power spectrum of the interstellar electron density. Here we use ISS observations through the nearby (less than or approximately =1 kpc) (ISM) to estimate the spectrum. From measurements of angular broadening of pulsars and extragalactic sources, decorrelation bandwidth of pulsars, refractive steering of features in pulsar dynamic spectra, dispersion measured fluctuations of pulsars, and refractive scintillation index measurements, we construct a composite structure function that is approximately power law over 2 x 10(exp 6) m less than scale less than 10(exp 13) m. The data are consistent with the structure function having a logarithmic slope versus baseline less than 2; thus there is a meaningful connection between scales in the radiowave fluctuation field and the scales in the electron density field causing the scattering. The data give an upper limit to the inner scale, l(sub o) less than or approximately 10(exp 8) m and are consistent with much smaller values. We construct a composite electron density spectrum that is approximately power law over at least the approximately = 5 decade wavenumber range 10(exp -13)/m less than wavenumber less than 10(exp -8)/m and that may extend to higher wavenumbers. The average spectral index of electron density over this wavenumber range is approximately = 3.7, very close to the value expected for a Kolmogorov process. The outer scale size, L(sub o), must be greater than or approximately = 10(exp 13) m (determined from dispersion measure fluctuations). When the ISS data are combined with measurements of differential Faraday rotation angle, and gradients in the average electron density, constraints can be put on the spectrum at much smaller wave numbers. The composite spectrum is consistent with a Kolmogorov-like power law over a huge range (10 or more decades) of spatial wavenumber with an infrared outer scale L(sub o) greater than or approximately 10(exp 18)m. This power-law subrange-expressed as ratio of outer to inner scales-is comparable to or larger than that of other naturally occurring turbulent fluids, such as the oceans or the solar wind. We outline some of the theories for generating and maintaining such a spectrum over this huge wavenumber range.

Armstrong, J. W.↗

Feedback Techniques and Ecloud Instabilites - Design Estimates

The SPS at high intensities exhibits transverse single-bunch instabilities with signatures consistent with an Ecloud driven instability. While the SPS has a coupled-bunch transverse feedback system, control of Ecloud-driven motion requires a much wider control bandwidth capable of sensing and controlling motion within each bunched beam. This paper draws beam dynamics data from the measurements and simulations of this SPS instability, and estimates system requirements for a feedback system with 2-4 GS/sec. sampling rates to damp Ecloud-driven transverse motion in the SPS at intensities desired for high-current LHC operation.

43 PARTICLE ACCELERATORS↗

Quantum optimality of photon counting for temperature measurement of thermal astronomical sources

Using the quantum Cramér–Rao bound from quantum estimation theory, we derive a fundamental quantum limit on the sensitivity of a temperature measurement of a thermal astronomical source. This limit is expressed in terms of the source temperature T{sub s}, input spectral bandwidth Δν, and measurement duration T, subject to a long measurement time assumption TΔν≫1. It is valid for any measurement procedure that yields an unbiased estimate of the source temperature. The limit agrees with the sensitivity of direct detection or photon counting, and also with that of the ideal radiometer in the regime kT{sub s}/hν{sub 0}≫1 for which the Rayleigh–Jeans approximation is valid, where ν{sub 0} is the center frequency at which the radiometer operates. While valid across the electromagnetic spectrum, the limit is especially relevant for radio astronomy in this regime, since it implies that no ingenious design or technological improvement can beat an ideal radiometer for temperature measurement. In this connection, our result refutes the recent claim of a radio astronomy technique with much-improved sensitivity over the radiometer.

79 ASTRONOMY AND ASTROPHYSICS↗

High and low energy gamma beam dump designs for the gamma beam delivery system at ELI-NP

The Extreme Light Infrastructure - Nuclear Physics (ELI-NP) is under construction in Magurele, Bucharest, Romania. The facility will use two 10 PW lasers and a high intensity, narrow bandwidth gamma beam for stand-alone and combined laser-gamma experiments. The accurate estimation of particle doses and their restriction within the limits for both personel and general public is very important in the design phase of any nuclear facility. In the present work, Monte Carlo simulations are performed using FLUKA and MCNPX to design 19.4 and 4 MeV gamma beam dumps along with shielding of experimental areas. Dose rate contour plots from both FLUKA and MCNPX along with numerical values of doses in experimental area E8 of the facility are performed. The calculated doses are within the permissible limits. Furthermore, a reasonable agreement between both codes enhances our confidence in using one or both of them for future calculations in beam dump designs, radiation shielding, radioactive inventory, and other calculations releated to radiation protection. Residual dose rates and residual activity calculations are also performed for high-energy beam dump and their effect is negligible in comparison to contributions from prompt radiation.

43 PARTICLE ACCELERATORS↗

Development of a London moment readout for a superconducting gyroscope

A gyroscope for verifying certain predictions of General Relativity is under development at Stanford. A method of measuring the gyroscope orientation based on the use of the London moment and a SQUID magnetometer is described. It is estimated that the required sensitivity of 1 milliarc-sec can be achieved in a bandwidth of 2.5 times 10 to the -6th Hz.

Anderson, J. T.↗

Radar investigation of asteroids

Software to support all stages of asteroid radar observation and data analysis is developed. First-order analysis of all data in hand is complete. Estimates of radar cross sections, circular polarization ratios, and limb-to-limb echo spectral bandwidths for asteroids 7 Iris, 16 Psyche, 97 Klotho, 1862 Apollo, and 1915 Quetzalcoatl are reported. Radar observations of two previously unobserved asteroids were conducted. An Aten asteroid, 2100 Ra-Shalom, with the smallest known semimajor axis (0.83) was detected. Preliminary data reduction indicates a circular polarization ratio comparable to those of Apollo, Quetzalcoatl, and Toro.

Ostro, S. J.↗

Flight control law synthesis for an elastic vehicle by eigenspace assignment

Eigenspace assignment is explored as a control-law synthesis approach for 'shaping' the transient response of an elastic aircraft. A direct technique is utilized for synthesizing a full-state- as well as a reduced-order-output-feedback control law and the selection of the desired eigenspace is discussed. Robustness issues and results are evaluated and robustness recovery with full state estimation is demonstrated. Also, an appropriate implementation of state estimation to preserve the desired transient response (or desired eigenspace) is presented. Problems regarding actuator bandwidth and unmodeled modes are noted.

Schmidt, D. K.↗