Search NASA⌕ Search

SEARCH · Search NASA

Results for “black body”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Aether drift and the isotropy of the universe

An experiment is proposed which will detect and map the large-angular-scale anisotropies in the 3 deg K primordial black-body radiation with a sensitivity of .0002 deg K and an angular resolution of about 10 deg . It will detect the motion of the earth with respect to the distant matter of the Universe ("Aether Drift"), and will probe the homogeneity and isotropy of the Universe (the "Cosmological Principle"). The experiment will use two Dicke radiometers, one at 33 GHz to detect the cosmic anisotropy, and one at 54 GHz to detect anisotropies in the residual oxygen above the detectors. An upper hatch for the NASA-AMES Earth Survey Aircraft (U-2) is being modified to accept the dual-radiometer system. A few hours of observation should be sufficient to detect an anisotropy.

Muller, R. A.↗
NASA NTRS1975

Orion-arm magnetic monopoles and gamma rays

It is shown that galactic-disk monopoles could yield air showers which are stochastically aligned with the local Orion-arm magnetic field and which are above the energies of similarly aligned galactic heavy nuclei. In the absence of a cosmic-ray anisotropy, this method sets limits on the flux of galactic monopoles and their production cross sections. Limits based on the cosmic-ray anisotropy at 10 to the 19th power eV are presented. The possibility of stochastic alignment of inverse Compton photons from monopoles and 2.7 K black-body photons is considered. The resulting monopole-flux limits, based on the same data as those calculated by Osborne (1970), differ significantly from Osborne's limits, where the mechanisms of spiral-arm alignment and galactic containment are ignored.

Tompkins, D. R., Jr.↗
NASA NTRS1976

Upconversion spectrometry for astrophysical applications

Black body measurements and absorption spectra of methane near 3.3 microns are presented and used as examples in a discussion of upconversion spectrometry for astrophysical application. Factors determining the system conversion efficiency and the minimum detectable flux for a typical system are presented. The spectrometer described uses an Argon-ion laser and a temperature turned LiNbO3 crystal in a CW mode. Satisfactory agreement between measured and calculated performance parameters is obtained. An estimate of the highest performance parameters attainable using current technology is given.

Kostiuk, T.↗
NASA NTRS1976

Evidence for a 17-d periodicity from Cyg X-3

Data are presented from the Ariel-V All-Sky Monitor which indicate a 17-day periodicity of the X-ray spectra from Cyg X-3 (3U2030+40). The data are consistent with data from the Ariel V Sky Survey Experiment. Assuming that the high intensity state of Cyg X-3 is well fitted by a structureless black body (Serlemitsos et al., 1975), and that the 17-day maxima correspond to increased electron scattering in the source, it is suggested that the 17-day effect is analogous to the 35-day variation in Her X-1. The possible explanation of this phenomenon as a result of the 17-day orbital period of the binary system containing Cyg X-3 is severely constrained by the stability of the well-known 4.8-hour variation.

Holt, S. S.↗
NASA NTRS1977

Optical properties of ion beam textured metals

Copper, silicon, aluminum, titanium and 316 stainless steel were textured by 1000 eV xenon ions from an 8 cm diameter electron bombardment ion source. Simultaneously sputter-deposited tantalum was used to facilitate the development of the surface microstructure. Scanning electron microscopy of the ion textured surfaces revealed two types of microstructure. Copper, silicon, and aluminum developed a cone structure with an average peak-to-peak distance ranging from 1 micron for silicon to 6 microns for aluminum. Titanium and 316 stainless steel developed a serpentine ridge structure. The average peak-to-peak distance for both of these materials was 0.5 micron. Spectral reflectance was measured using an integrating sphere and a holraum reflectometer. Total reflectance for air mass 0 and 2, solar absorptance and total emittance normalized for a 425 K black body were calculated from the reflectance measurements.

Hudson, W. R.↗
NASA NTRS1977

Optical Line Radiation from Uranium Plasmas

The radiative energy current due to line radiation is calculated in a U 235 plasma over a temperature range of 5000 K to 8000 K. Also a variation in the neutron flux of 2 x 10 to the 12th power neutrons/ (sq cm-sec) to 2 x 10 to the 16th power neutrons/(sq cm-sec) is considered. The plasma forms a cylinder with a diameter and height of one meter. To calculate the radiative-energy current, a rate equation formalism is developed to solve for the atomic state densities along with a model for the energy levels in neutral and singly ionized uranium. Because the electron states in uranium lie below 5eV, recombination is the principle excitation mechanism. At and above 6000 K, inversions were found, and at all temperatures the line radiation at line center was greater than the corresponding black-body radiation. There are negligible differences in the radiative-energy current at 6000 K for variations in the neutron flux. The average opacity, which varied from 100 to 100,000 gm/sq cm, over the frequency range of line radiation is calculated.

Maceda, E. L.↗
NASA NTRS1976

An extrasolar extreme-ultraviolet object. II - The nature of HZ 43

A variety of data are presented concerning the spectrum, distance, temperature, and evolutionary state of the hot white dwarf HZ 43, the first extrasolar object to be detected in the EUV band. The data include spectrophotometry of the star and its red dwarf companion (HZ 43B), a trigonometric parallax for the star, its tangential velocity, and results of soft X-ray and EUV observations. The main conclusions are that: (1) the spectrum of HZ 43A is that of a hot DAwk star, (2) HZ 43B is a dM3.5e star, (3) the distance of the system is about 65 pc, (4) the tangential velocity is not atypical of white dwarfs, and (5) the stellar energy distribution of HZ 43A is well fitted by a black body with an effective temperature of approximately 110,000 K. Evolutionary implications of the existence of an object as hot as HZ 43A are briefly considered, and it is suggested that the progenitors of hot DA stars must include objects hotter than spectral type sdB, with logical possibilities being nuclei of planetary nebulae and sdO stars.

Margon, B.↗
NASA NTRS1977

Spectrophotometry of the transient X-ray source A0620-00

Optical observations of the transient X-ray source A0620-00 over the wavelength range from about 3200 to 6600 A are analyzed which were made with the 5-m Hale telescope using a multichannel spectrometer, a digital spectrograph with a cooled integrating SIT vidicon, and an image photon-counting system attached to the camera of the coude spectrograph. Infrared observations at 1.65, 2.2, and 3.5 microns are also examined. Individual spectral lines of special interest are discussed, the E(B-V) color excess is estimated to be about 0.40, and a distance of 1200 pc is adopted. Analysis of the continuous spectrum yields several simple binary models. A specific model is proposed in which one of the continuum sources is an optically thick object characterized by a model atmosphere at a temperature of 25,000 to 30,000 K and the second source is either a cool black body at 4000 K or a partially optically thick source of bound-free plus free-free radiation from a hydrogen gas with an electron temperature of at least 100,000 K. Some possible parameters of these sources and of the accretion disk are considered.

Oke, J. B.↗
NASA NTRS1977

Optical properties of ion beam textured metals

Copper, silicon, aluminum, titanium and 316 stainless steel were textured by 1000 eV xenon ions from an 8-cm diameter electron bombardment ion source. Copper, silicon, and aluminum developed a cone structure with an average peak-to-peak distance ranging from 1 micron for silicon to 6 microns for aluminum. Titanium and 316 stainless steel developed a serpentine ridge structure. The average peak-to-peak distance for both of these materials was 0.5 micron. Total reflectance for air mass 0 and 2, solar absorptance, and total emittance, normalized for a 425 K black body were calculated from the reflectance measurements. All materials had solar absorptances between 0.93 (stainless steel) and 0.97 (silicon and aluminum). Total emittance values of 0.75, 0.80, and 0.85 for Si, Al, and Cu, respectively, resulted in a solar absorptance/total emittance ratio of approximately 1.2. Titanium and 316 stainless steel had values of 2.6 and 2.9, respectively, for this ratio.

Hudson, W. R.↗
NASA NTRS1975

Thermal Performance of a Customized Multilayer Insulation (MLI). Design and Fabrication of Test Facility Hardware

The design, fabrication, and assembly of hardware for testing the performance of a customized multilayer insulation are discussed. System components described include the thermal payload simulator, the modified cryoshroud, and a tank back pressure control device designed to maintain a constant liquid boiling point during the thermal evaluation of the multilayer insulation. The thermal payload simulator will provide a constant temperature surface in the range of 20.5 to 417K (37 to 750R) for the insulated tank to view. The cryoshroud was modified to establish a low temperature black body cavity while limiting liquid hydrogen usage to a minimum feasible rate.

Leonhard, K. E.↗
NASA NTRS1978

Diffuse fluxes of cosmic high energy neutrinos

Production spectra of high-energy neutrinos from galactic cosmic ray interactions with interstellar gas and extragalactic ultrahigh energy cosmic-ray interactions with microwave black-body photons are presented and discussed. These production processes involve the decay of charged pions and are thus related to the production of cosmic gamma-rays from the decay of neutral pions. Estimates of the neutrino fluxes from various diffuse cosmic sources are then made and the reasons fro significant differences with previous estimates are discussed. Predicted event rates for a DUMAND type detection system are significantly lower than early estimates indicated.

Stecker, F. W.↗
NASA NTRS1977

Photon pair production in astrophysical transrelativistic plasmas

Photon pair-production processes in marginally relativistic (transrelativistic) accretion plasmas are investigated in both Planckian and non-Planckian cases. Pair production in a plasma with an equilibrium (Planck) spectrum is reviewed, and pair-concentration calculations are performed for three general non-Planckian situations most relevant to black-hole accretion scenarios: steady-state transrelativistic plasmas of relatively high density characterized by a pure bremsstrahlung spectrum, a comptonized bremsstrahlung spectrum, and an unsaturated Compton scattering spectrum. The results obtained indicate that for transrelativistic temperatures (600 million to 6 billion K) photon pair production is not generally a dominant process for a plasma with a pure bremsstrahlung spectrum, but becomes dominant for plasmas where comptonization is important. It is also shown that photon pair-creation processes in a transrelativistic bremsstrahlung-radiating plasma that is more than marginally optically thick to Compton scattering significantly alter the plasma's spectrum by forcing it to become black-body before it reaches relativistic temperatures. Pair production and instabilities in unsteady-state plasmas are briefly considered

Stoeger, W. R.↗
NASA NTRS1978

Average properties of X-ray burst sources

Total integrated fluxes, maximum fluxes, and spectra of X-ray bursts from 10 sources are analyzed, and a uniformity in observed properties is detected. If it is assumed that the peak luminosity in a burst is a standard candle, the data suggest that (1) the effective black body radius observed in bursts is the same for all burst sources; (2) the tails of X-ray bursts are emitted by cooling surfaces whose size is the same for all burst sources (to within + or - 20%); and (3) the total energy emitted from X-ray bursts is the same for all burst sources (to within + or - 30%). This analysis applies to Type I bursts which are emitted by all burst sources and repeat at comparatively long time intervals. The analysis does not apply to Type II bursts, which repeat on time scales of seconds to minutes.

Van Paradijs, J.↗
NASA NTRS1979

Design investigation of solar powered lasers for space applications

The feasibility of solar powered lasers for continuous operation in space power transmission was investigated. Laser power transmission in space over distances of 10 to 100 thousand kilometers appears possible. A variety of lasers was considered, including solar-powered GDLs and EDLs, and solar-pumped lasers. An indirect solar-pumped laser was investigated which uses a solar-heated black body cavity to pump the lasant. Efficiencies in the range of 10 to 20 percent are projected for these indirect optically pumped lasers.

Taussig, R.↗
NASA NTRS1979

Soft X-ray emission from the vicinity of the dwarf nova AY Lyrae

The detection of a low-intensity soft X-ray source in the region of the dwarf nova AY Lyrae is reported. The source, designated H1839 plus 37, appeared in superpositions of HEAO A2 X-ray scans taken on October 9, 1977; it was observed only in the energy interval 0.18 to 0.43 keV. The peak intensity was 0.014 plus or minus 0.0027 counts/sq cm/sec. If a thermal bremsstrahlung spectrum is assumed, the estimated upper temperature limit of the source is 5 million K; an upper limit of 1.4 million K is implied if a black-body fit is assumed.

Cordova, F. A.↗
NASA NTRS1980

Global calibration of terrestrial reference cells and errors involved in using different irradiance monitoring techniques

The feasibility of global calibration of terrestrial reference cells is discussed. A simple, accurate 'secondary' calibration technique based on ratios of test to reference cell currents measured in natural sunlight is described. Different techniques for monitoring incident irradiance during solar cell performance measurements are also examined and assessed, including the techniques of black-body detectors, calibrated reference cells, and the convolution of spectral response with solar irradiance.

Curtis, H. B.↗
NASA NTRS1980

Feasibility of modifying the high resolution infrared radiation sounder (HIRS/2) for measuring spectral components of Earth radiation budget

The concept of adding four spectral channels to the 20 channel HIRS/2 instrument for the purpose of determining the origin and profile of radiant existence from the Earth's atmosphere is considered. Methods of addition of three channels at 0.5, 1.0 and 1.6 micron m to the present 0.7 micron m visible channel and an 18-25 micron m channel to the present 19 channels spaced from 3.7 micron m to 15 micron m are addressed. Optical components and physical positions were found that permit inclusion of these added channels with negligible effect on the performance of the present 20 channels. Data format changes permit inclusion of the ERB data in the 288 bits allocated to HIRS for each scan element. A lamp and collimating optic assembly may replace one of the on board radiometric black bodies to provide a reference source for the albedo channels. Some increase in instrument dimensions, weight and power will be required to accommodate the modifications.

Koenig, E. W.↗