Search NASA⌕ Search

SEARCH · Search NASA

Results for “bombardment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Direct observation of the exotic β – γ – α decay mode in the T z = – 1 nucleus Na 20

The exotic β – γ – α decay mode of 20 Na has been directly observed for the first time in the Day-one experiment at the Beijing Radioactive Ion-beam Facility. The 20 Na source was produced by using a 100-MeV proton beam bombarding a stack of microporous MgO thick target and delivered as an intense mass separated beam after online ionization. A high-efficiency simultaneous measurement of β, γ, and α transitions enables the β-delayed γ – γ and α – γ coincidence spectroscopy. Here three β – γ – α exotic decay sequences in 20 Na are discovered, which expands the rare decay modes observed in β decay. Moreover, a β – α –decay sequence to the 6130-keV 3 – state of 16 O is observed, which is likely through the 12367-keV 1 + state in 20 Ne. The experimentally deduced B(F) and B(GT) are compared to the shell-model calculation, the allowed β transition strengths can be well accounted for by using sd shell-model space interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Levels in 125 Cd populated by the β decay of 125 m Ag and 125 Ag

Here, the β decay of 125 m, 125 Ag into levels in 125 Cd was investigated at the Holifield Radioactive Ion Beam Facility (HRIBF). Uranium-238 targets were bombarded with 50-MeV protons with an intensity of 15 μ A, and the induced fission products were mass separated and deposited on a moving tape in the center of the VANDLE array consisting of γ detectors and plastic scintillators. A partial decay scheme has been assigned for both β decay of the (9/2 + ) ground state of 125 Ag and its low-lying (1/2 - ) isomer, with the energy of the low-lying (11/2 - ) isomeric state in 125 Cd assigned as 188.5 keV. In addition, β -delayed neutron emission probabilities were also determined to be 1.2(2)% for the (9/2 + ) 125 Ag ground state and 4.6(10)% for the (1/2 - ) isomer, which are substantially lower than the previously reported value.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Energy dependence of $\textit{p}$ + 232 Th fission mass distributions: Mass-asymmetric standard I and standard II modes, and multichance fission

Background: The predominant mass-asymmetric fission of actinide nuclides occurs mainly through the so-called standard I and standard II modes. Though understood to be caused by shape-dependent shell structures encountered between the fission barrier deformation and scission, the most relevant shell gaps are still not firmly established. The standard I mode had been associated with the spherical doubly magic 132 Sn, and thus the $\textit{Z}$ = 50 proton shell, but recently it has been proposed that standard I and standard II are associated with quadrupole and octupole deformed gaps at $\textit{Z}$ = 52 and 56, respectively. Purpose: In this work, we investigate how the relative probabilities of the standard I and standard II modes vary with excitation energy near threshold, probing where the two modes bifurcate. Methods: The Australian National University Heavy Ion Accelerator Facility and CUBE fission spectrometer have been used to measure fission mass distributions for the $\textit{p}$ + 232 Th reaction (forming 233 Pa) at closely spaced bombarding energy intervals from 6.5 to 28 MeV. Results: A model-independent analysis of the energy dependence of the shape of the mass-asymmetric peak shows a strong dependence of the standard I and standard II relative probability on excitation energy near threshold. Conclusions: The results are consistent with the standard II mode having a lower fission barrier than standard I in 233 Pa, with the latter increasing continually in relative probability above its barrier energy. It is concluded that multichance fission, in particular last chance fission, plays a strong role in determining the observed energy dependence of all fission modes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Bayesian estimation of the $S$ factor and thermonuclear reaction rate for 16 O(p, γ) 17 F

The 16 O(p, γ) 17 F reaction is the slowest hydrogen-burning process in the CNO mass region. Its thermonuclear rate sensitively impacts predictions of oxygen isotopic ratios in a number of astrophysical sites, including AGB stars. The reaction has been measured several times at low bombarding energies using a variety of techniques. The most recent evaluated experimental rates have a reported uncertainty of about 7.5% below 1 GK. However, the previous rate estimate represents a best guess only and was not based on rigorous statistical methods. We apply a Bayesian model to fit all reliable 16 O(p, γ) 17 F cross section data, and take into account independent contributions of statistical and systematic uncertainties. The nuclear reaction model employed is a single-particle potential model involving a Woods-Saxon potential for generating the radial bound state wave function. The model has three physical parameters, the radius and diffuseness of the Woods-Saxon potential, and the asymptotic normalization coefficients (ANCs) of the final bound state in 17 F. Here, we find that performing the Bayesian S -factor fit using ANCs as scaling parameters has a distinct advantage over adopting spectroscopic factors instead. Based on these results, we present the first statistically rigorous estimation of experimental 16 O(p, γ) 17 F reaction rates, with uncertainties (±4.2%) of about half the previously reported values.

6 ≤ A ≤ 19↗
DOE OSTI2023

Spectroscopic quadrupole moments in 124 $\mathrm{Xe}$

The Xe isotopic chain with four valence protons above the Z=50 shell closure is an ideal laboratory for the study of the evolution of nuclear deformation. At the N=82 shell closure, 136 Xe presents all characteristics of a doubly closed shell nucleus with a spherical shape. In the very neutron-deficient isotopes close to N=50, the α-decay chain of Xe was investigated to probe the radioactive decay properties near the drip-line and the magicity of 100 Sn. Additionally, the Xe isotopes present higher order symmetries in the nuclear deformation such as the octupole degree of freedom near N=60 and N=90 or O(6) symmetry in stable isotopes. The relevance of the O(6) symmetry has been investigated by measuring the spectroscopic quadrupole moment of the first excited states in 124 Xe. In the O(6) symmetry limit, the spectroscopic quadrupole moment of collective states is expected to be null. A stable 124 Xe beam with energies of 4.03A MeV and 4.11 A MeV was used to bombard a nat W target at the GANIL facility. Excited states were populated via the safe Coulomb excitation reaction. The collision of the heavy ions with a large Z at low energy make this reaction sensitive to the diagonal E2 matrix element of the excited states. The recoils were detected in the VAMOS++ magnetic spectrometer and the γ rays in the AGATA tracking array. The least squares fitting code gosia was used for the analysis to extract both E2 and M1 transitional and E2 diagonal matrix elements. The rotational ground state band was populated up to the 8$^{+}_{1}$ state as well as the 2$^{+}_{2}$ and 4$^{+}_{2}$ states. Using high precision spectroscopic data to constrain the gosia fit, the spectroscopic quadrupole moments of the 2$^{+}_{1}$, 4$^{+}_{1}$, and 6$^{+}_{1}$ states were determined for the first time. The spectroscopic quadrupole moments were found to be negative, large, and constant in the ground state band underlining the prolate axially deformed ground state band of 124 Xe. Here, the present experimental data confirm that the O(6) symmetry is substantially broken in 124 Xe .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Measuring the cross section of the N 15 ( α , γ ) 19 F reaction using a single-fluid bubble chamber

15 N(α, γ) 19 F is believed to be the primary means of stellar nucleosynthesis of fluorine. Here we present the use of a single-fluid bubble chamber to measure the cross section of the time-inverse photo-dissociation reaction. The method benefits from a luminosity increase of several orders of magnitude due to the use of a thicker liquid target - compared to thin films or gas targets - and from the reciprocity theorem. We discuss the results of experiments at the Thomas Jefferson National Accelerator Facility, where the cross section of the photodisintegration process 19 F(γ, α) 15 N was measured by bombarding a superheated fluid of C 3 F 8 with bremsstrahlung γ rays produced by impinging a 4 - 5.5 MeV electron beam on a Cu radiator. From the photodissociation yield the cross section was extracted by performing a convolution with a Monte Carlo–generated γ-ray beam spectrum. The measurement produced a cross section that was then time inverted using the reciprocity theorem. The cross section for the 15 N(α, γ) 19 F reaction was determined down to a value in the range of hundreds of picobarns. We report that with further improvements of the experimental setup the technique could potentially push cross section measurements down to the single picobarn range.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Influence of additional neutrons on the fusion cross section beyond the N = 8 shell

Fusion enhancement for neutron-rich isotopes of oxygen on carbon nuclei was probed. To measure the fusion cross-section a 20O beam accelerated to E lab /A = 2.7 MeV bombarded the active-target detector MuSIC@Indiana with a fill gas of CH 4 . Examination of the average fusion cross-section over the interval 0.5 ≤ (E c.m. –V B )/V B ≤ 1.2 for 16–20 O + 12 C reveals that while even isotopes of oxygen exhibit essentially the same cross-section, the cross-section for odd isotopes can be either enhanced or suppressed relative to the even A members of the isotopic chain. Theoretical models fail to explain the observed experimental results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Decay of a microsecond seniority 3 isomeric state in Hf 155

Excited states in the neutron-deficient nuclide Hf 155 have been investigated in experiments performed at the Accelerator Laboratory of the University of Jyväskylä. The Hf 155 nuclei were produced in fusion-evaporation reactions induced by beams of 295 and 315 MeV Ni 58 ions bombarding an isotopically enriched Pd 102 target and separated using the recoil mass separator MARA. An isomeric state having a half-life of 510(30) ns was discovered and is interpreted as a seniority υ = 3 , ( π h 11 / 2 2 ⊗ ν f 7 / 2 ) 27 / 2 − configuration. The γ -ray transitions emitted in the deexcitation of the isomeric state to the ground state were identified and a level scheme was constructed, from which the excitation energy of the isomer was determined to be 2581.5(10) keV. A B ( E 2 ) value of 0.45(3) W.u. was deduced for the 105.4 keV transition depopulating the isomeric state. The deduced level scheme and B ( E 2 ) value are compared with systematics and shell-model calculations. Published by the American Physical Society 2024

Physics↗
DOE OSTI2024

Decoherence by warm horizons

Recently Danielson, Satishchandran, and Wald (DSW) have shown that quantum superpositions held outside of Killing horizons will decohere at a steady rate. This occurs because of the inevitable radiation of soft photons (gravitons), which imprint a electromagnetic (gravitational) “which-path” memory onto the horizon. Rather than appealing to this global description, an experimenter ought to also have a local description for the cause of decoherence. One might intuitively guess that this is just the bombardment of Hawking/Unruh radiation on the system, however simple calculations challenge this idea—the same superposition held in a finite temperature inertial laboratory does not decohere at the DSW rate. In this work we provide a local description of the decoherence by mapping the DSW setup onto a worldline-localized model resembling an Unruh-DeWitt particle detector. We present an interpretation in terms of random local forces which do not sufficiently self-average over long times. Using the Rindler horizon as a concrete example we clarify the crucial role of temperature, and show that the Unruh effect is the only quantum mechanical effect underlying these random forces. A general lesson is that for an environment which induces Ohmic friction on the central system (as one gets from the classical Abraham-Lorentz-Dirac force, in an accelerating frame) the fluctuation-dissipation theorem implies that when this environment is at finite temperature it will cause steady decoherence on the central system. Our results agree with DSW and provide the complementary local perspective. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2022

Experimental Demonstration of the Thin-Film Liquid-Metal Jet as a Charge Stripper

For high-power heavy ion accelerators, the development of a suitable charge stripper, which can handle intense beams, is essential. This Letter describes the first experimental demonstration of a heavy ion liquid lithium charge stripper. A 10–20 μm thick liquid lithium jet flowing at >50 m/s was formed and confirmed stable when bombarded by various heavy ion beams, while increasing the charge state of the incoming beams to the desired charge state range. Finally, this demonstration proved the existing power limitation with the conventional strippers can be overcome by the liquid-metal stripper, opening completely new possibilities in high-power accelerator development.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Measuring X-Ray Emission Line Shapes in Neutral Species for XRISM Calibration

Space X-ray spectrometers such as the Resolve instrument on XRISM require precise calibration in order to interpret the spectra of astrophysical objects. Key components of the calibration are the energy scale and the core line spread function, both of which vary with photon energy. A major issue in the calibration of high-resolution spectrometers is locating good calibrators with well-known and stable intrinsic line shapes. Neutral fluorescence is widely used, but inner-shell transitions in neutral atoms often exhibit complex, poorly documented line shapes that vary with excitation conditions. Here, in this study, we present empirical measurements of K-shell transitions in neutral O and F below 1 keV using an engineering model XRISM calorimeter array, an electron bombardment modulated X-ray source, and an electron beam ion trap (EBIT) to provide a precise energy reference. In addition, we report measurements of the Mo Lα complex with the transition-edge microcalorimeter spectrometer (TEMS), which reveal strong satellite structure and sensitivity of the line shape to the incident exciting spectrum. Together, these results demonstrate the need for empirical line-shape models, highlight the nonstationary nature of neutral fluorescence features, and define a path toward developing transfer standards for XRISM and future precision instruments such as Athena/X-IFU.

Astronomy and AstroPhysics↗
DOE OSTI2021

Fast Local Spatial Verification for Feature-Agnostic Large-Scale Image Retrieval

Images from social media can reflect diverse viewpoints, heated arguments, and expressions of creativity, adding new complexity to retrieval tasks. Researchers working on Content-Based Image Retrieval (CBIR) have traditionally tuned their algorithms to match filtered results with user search intent. However, we are now bombarded with composite images of unknown origin, authenticity, and even meaning. With such uncertainty, users may not have an initial idea of what the search query results should look like. For instance, hidden people, spliced objects, and subtly altered scenes can be difficult for a user to detect initially in a meme image, but may contribute significantly to its composition. It is pertinent to design systems that retrieve images with these nuanced relationships in addition to providing more traditional results, such as duplicates and near-duplicates — and to do so with enough efficiency at large scale. In this work, we propose a new approach for spatial verification that aims at modeling object-level regions using image keypoints retrieved from an image index, which is then used to accurately weight small contributing objects within the results, without the need for costly object detection steps. We call this method the Objects in Scene to Objects in Scene (OS2OS) score, and it is optimized for fast matrix operations, which can run quickly on either CPUs or GPUs. It performs comparably to state-of-the-art methods on classic CBIR problems (Oxford 5K, Paris 6K, and Google-Landmarks), and outperforms them in emerging retrieval tasks such as image composite matching in the NIST MFC2018 dataset and meme-style imagery from Reddit.

42 ENGINEERING↗
DOE OSTI2020

Time as a microbial resource

Microbes need resources for energy and cellular building material. They also need access to clement conditions with liquid water and a cellular damage rate that is lower than repair. When deprived of resources and clement conditions, microbes often enter some form of dormancy (e.g., by ceasing cell division, slowing metabolic rate, or forming an endospore) until they can grow again. For example, at night, phototrophs wait for the sun to return. In winter, soil microbes wait for warmer temperatures. Microbes that cause diseases like tuberculosis can stay dormant for years, waiting for the cessation of antibiotic or immune system bombardment. But what about longer timescales? Unlike multicellular life, microbes survive in an extremely broad range of conditions and can access an amazing variety of resources to maintain cellular functions in the absence of cell division. This means that they have the potential to be dormant for much longer than a few months or years. There is no theoretical reason microbes cannot survive on maintenance energy for hundreds or thousands of years, or longer, with little to no cell proliferation. Here, given this lack of theoretical constraints on the length of microbial dormancy intervals, two questions arise, (i) is there evidence for the existence of organisms experiencing very long dormancies? And (ii) what could be the advantages of such long wait times?

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Molecular dynamics study of silicon atomic layer etching by chlorine gas and argon ions

Classical molecular dynamics (MD) is used to simulate atomic layer etching processes of silicon by alternating exposure to chlorine gas and argon ions. In order to validate our model, a rigorous comparison is done with ion beam experiments found in the literature [Park et al., Jpn. J. Appl. Phys. 44, 389 (2005)]. Here it is shown that the etch per cycle (EPC) as a function of argon ion energy from simulations is in quantitative agreement with experimental results if the correct argon ion fluence is used in the simulations. The EPC as a function of ion irradiation time and amount of chlorine exposure also show good agreement with the experiment. The MD simulations also show the formation of an amorphous silicon region with chlorine atoms mixed uniformly throughout following ion bombardment. Finally, the etch products during the ion irradiation step are analyzed and discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

In-plasma photo-assisted etching of Si with chlorine aided by an external vacuum ultraviolet source

Photo-assisted etching of p-type Si was previously found to occur in a chlorine-containing, Faraday-shielded, inductively coupled plasma (ICP), and this was attributed to the vacuum ultraviolet (VUV) light generated by the plasma. Other causes for the very high etching rates were ruled out, including ion bombardment. In the present study, the substrate in the main Cl2/Ar ICP was subjected to extra VUV light that was generated in an independently controlled, auxiliary Ar/He ICP in tandem with the main ICP. The ICPs were separated by a tungsten mesh and a bundle of high-aspect-ratio quartz tubes in a honeycomb configuration. There was no measurable perturbation of the main plasma by the auxiliary plasma. The etching rate was found to be enhanced by 11%–51% with the additional VUV light provided by the auxiliary ICP. With absolute measurements of the auxiliary ICP photon flux at the sample surface, as described elsewhere, incredibly large etching yields of 90–240 Si atoms per photon were obtained. It is argued that etching is not a result of electron–hole pair formation but is instead ascribed to a photocatalytic chain reaction.

42 ENGINEERING↗
DOE OSTI2023

Characterizing the composition, structure, and mechanical properties of magnetron sputtering physical vapor deposition TiN and TiSiN coatings

Ti(Si)N coatings were deposited on Si wafers via magnetron sputtering physical vapor deposition technique. Scanning electron microscopy and atomic force microscopy were used to study the morphologies, grain size, and thicknesses of the different films. X-ray diffraction confirmed the formation of the titanium nitride cubic phase. X-ray photoelectron spectroscopy (XPS) was used to study the silicon and oxygen levels in the films, and high resolution XPS was used to determine the surface oxide to nitride ratios as well as the silicon–nitrogen environment. The hardness of these films was then determined with nanoindentation. It was shown that grain size and film density could be controlled by the Si level and the ion bombardment to eliminate the oxygen level in the nitride coatings, which led to the harder films. It was suggested that due to the miscibility of Si, a ternary TiSiN solid solution was formed. Stronger (200) orientation of the TiN B1-NaCl crystals was associated with increased hardness of the coatings. In conclusion, this crystalline structure was preserved after incorporating Si.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reactor wall effects in Si–Cl 2 –Ar atomic layer etching

This work complements our previous manuscript [J. Vac. Sci. Technol. A41, 062602 (2023)] where predictions from molecular dynamics (MD) simulations of silicon–chlorine–argon (Si–Cl 2 –Ar) atomic layer etching (ALE) are compared to experiments. When etch product distributions for atomic chlorine (Cl) and silicon chlorides were initially compared to optical emission spectroscopy (OES) signals, it appeared that there was a discrepancy between the MD predictions and experimental results at higher ion fluences. Experiments showed a relatively long period of nearly constant Cl-containing etch products released from the ion-bombarded surface (referred to as the “plateau”) but this effect was not observed in MD simulations. In this report, we demonstrate that the “plateau” observed in the OES signals is most likely due to the desorption of Cl-containing etch products from the walls of the reactor and subsequent adsorption on the Si substrate. Experiments varying the gas residence time in the chamber while keeping incoming gas concentrations and pressure constant support this interpretation. We also conducted experiments with an additional Ar-only flow in the chamber to reduce the concentration of Cl-containing species on the chamber walls. For both sets of flow modification experiments, we observe results consistent with the hypothesis that Cl-containing species desorbing from chamber walls are a significant cause of the observed discrepancy between MD predictions and experimental observations. If the measured OES signals are corrected for this “additional” source of Cl-containing species at the surface, the MD predictions and measured OES signals are in excellent agreement. This further supports the predictive capability of MD simulations to accurately capture the relevant physical and chemical processes in plasma-assisted ALE processes. We provide an order of magnitude estimate of the required density of Cl-containing species that would account for the additional etch products observed. Finally, we discuss the implications of this effect on ALE in plasma nanofabrication.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Deep potential molecular dynamics simulations of low-temperature plasma-surface interactions

Machine learning approaches to potential generation for molecular dynamics (MD) simulations of low-temperature plasma-surface interactions could greatly extend the range of chemical systems that can be modeled. Empirical potentials are difficult to generalize to complex combinations of multiple elements with interactions that might include covalent, ionic, and metallic bonds. This work demonstrates that a specific machine learning approach, Deep Potential Molecular Dynamics (DeepMD), can generate potentials that provide a good model of plasma etching in the Si-Cl-Ar system. Comparisons are made between MD results using DeepMD models and empirical potentials, as well as experimental measurements. Pure Si properties predicted by the DeepMD model are in reasonable agreement with experimental results. Simulations of Si bombardment by Ar + ions demonstrate the ability of the DeepMD method to predict sputtering yields as well as the depth of the amorphous-crystalline interface. Etch yields as a function of flux ratio and ion energy for simultaneous Cl 2 and Ar + impacts are in good agreement with previous simulation results and experiment. Predictions of etch yields and etch products during plasma-assisted atomic layer etching of Si-Cl 2 -Ar are shown to be in good agreement with MD predictions using empirical potentials and with experiment. Finally, good agreement was also seen with measurements for the spontaneous etching of Si by Cl atoms at 300 K. Further, the demonstration that DeepMD can reproduce results from MD simulations using empirical potentials is a necessary condition to future efforts to extend the method to a much wider range of systems for which empirical potentials may be difficult or impossible to obtain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗