Search NASA⌕ Search

SEARCH · Search NASA

Results for “bond cleavage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Catalytic materials for lithium-sulfur batteries: mechanisms, design strategies and future perspective

Lithium-sulfur batteries (LSBs) are attractive candidates for post-lithium-ion battery technologies because of their ultrahigh theoretical energy density and low cost of active cathode materials. However, the commercialization of LSBs remains extremely challenging primarily due to poor cycling performance and safety concerns, which are inherently caused by low conductivity of S 8 and Li 2 S, severe polysulfide shuttling, and high polarization by solid Li 2 S 2 /Li 2 S deposition. Catalytic materials could facilitate the large-scale practical application of LSBs by overcoming all these challenges. In this review, we investigate the sulfur species evolution in LSBs and explore the roles of catalytic materials in charge/discharge processes, highlighting the catalysis of solid S 8 to liquid polysulfides and solid Li 2 S 2 to Li 2 S. Furthermore, we offer systematic strategies from atomic to macro levels, including defect engineering, morphology engineering and catalyst compositing, to enhance catalysis efficiency in terms of sulfur supercooling, fast charge transfer, thiosulfate generation, disulfide bond cleavage, tuneable Li 2 S growth and Li 2 S decomposition enhancement. Finally, the design and availability of the proposed catalytic materials will further advance LSB technology from coin cells and pouch cells to the subsequent commercialization scale.

25 ENERGY STORAGE↗
DOE OSTI2023

Insertion reactions and structural studies of [(NHC)CuH] 2 with nitrogen-based substrates

The stoichiometric and catalytic reactions of Cu-H dimers supported by N-heterocyclic carbenes (NHCs) have mainly focused on the insertions of aldehydes, ketones, CO 2 , and unsaturated hydrocarbons. Here we investigated the stoichiometric reactions of dimeric [(NHC)CuH] 2 (NHC = IPr*, 6Dipp) with unsaturated nitrogen-based substrates of PhN=NPh, N 3 Ad, pyrazine, and N 2 O. The spectroscopic and structural chacterizations of the resulting monomeric, two-coordinate Cu(I) complexes containing diphenyl hydrazido, triazenido, pyrazinyl, and hydroxide ligands are discussed. The hydrazido complex of (IPr*)Cu(NPh-NHPh) and triazenido complex of (IPr*)Cu(HNNNAd) are resistant to N—N bond cleavage and loss of N 2 , respectively, to form the corresponding amido complexes even when heated at 80 °C over several hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Methanol adsorption and dissociation on GaP(110) studied by ambient pressure X-ray photoelectron spectroscopy

Ambient pressure X-ray photoelectron spectroscopy (AP-XPS) was used to investigate methanol (CH 3 OH) adsorption and reaction on the GaP(110) surface. Exposure of CH 3 OH to GaP(110) at room temperature led to the formation of at least four different surface species as indicated by analysis of C 1s and O 1s XPS features. By combining AP-XPS data with density functional theory calculations, the surface species were identified as methoxy (CH 3 O*), formaldehyde (CH 2 O*), and paired methanol (p-CH 3 O*H) and methoxy (p-CH 3 O*) species, where “paired” means that they belong to a hydrogen-bonded methoxy-methanol complex. Asterisk * here indicates an adsite. The formation of CH 2 O* via the dehydrogenation of CH 3 O* was shown to be limited by the availability of vacant phosphorus (P) sites on GaP(110). With an increase in CH 3 OH pressure, the fractional coverage of CH 3 O* species reached 0.55, and the surface P sites were completely saturated with hydrogen. Under a constant CH 3 OH pressure of 0.5 Torr, the surface concentration of the paired species and of CH 2 O* remained constant until 400 K. At higher temperatures, thermally driven reactions led to a significant increase in the concentration of surface CH x * species, which suggests that C-O bond cleavage of the CH 3 O group is the dominant decomposition mechanism on GaP(110). In conclusion, based on the reactivity of GaP(110) toward CH 3 OH dehydrogenation, elevated temperatures and CH 3 OH pressures may be used to functionalize this surface.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Impact of Small-Alkane Solvents on Polyolefin Hydrogenolysis over a Ruthenium Catalyst

Selective catalytic hydrogenolysis of polyolefins is a promising route to convert plastic waste into valuable liquid products, such as lubricants, waxes, and surfactants. However, the high viscosity of polymer melts imposes mass transfer limitations on this reaction. Solvents can mitigate these challenges, but their effects on reaction kinetics and product selectivity remain underexplored. Here, we systematically explore the effects of small n-alkanes and cycloalkanes on the hydrogenolysis of polyethylene and polypropylene over a Ru/TiO 2 catalyst. Using kinetic measurements and isotopic labeling, we show that n-octane at high mass fractions alters the mechanism from direct hydrogenation to solvent-mediated hydrogen transfer, reducing the rate of C–C bond cleavage. Longer alkanes further inhibit reactivity due to stronger surface binding. 1,4-Dimethylcyclohexane suppresses methane formation, favoring heavier products, while decalin likely forms surface-bound aromatics that poison the catalyst. Overall, alkane solvents modulate product selectivity and reduce the yield of methane byproduct, allowing for ∼35–40% selectivity to valuable C 20 -C 30 alkane products. This work highlights the complex impact of polymer–alkane mixtures on hydrogenolysis kinetics relevant to the design of commercial-scale plastic waste valorization processes.

Catalysts↗
DOE OSTI2023

A Dicationic fac -Re(bpy)(CO) 3 Cl for CO 2 Electroreduction at a Reduced Overpotential

Here, a dicationic Re bipyridine-type complex, fac-Re(6,6'-(2-((trimethylammonio)-methyl)phenyl)-2,2'-bipyridine)(CO) 3 Cl hexafluorophosphate (1 2+ ), has been synthesized and its electrochemical behavior under Ar and CO 2 has been investigated. The presence of pendent tetra-alkylammonium cations induces an anodic shift in the electrocatalytic potential for CO 2 reduction relative to structurally similar model complexes. The electrochemical mechanisms in anhydrous CH 3 CN and in the presence of weak acids (water or trifluoroethanol) have been analyzed using cyclic voltammetry assisted by infrared spectroelectrochemistry and theoretical calculations. The dication enables catalysis at a diminished potential through coulombic stabilization of the doubly reduced pentacoordinate species, its CO 2 adduct, the hydroxide anion, and the conjugate base formed during acid-assisted C-OH bond cleavage of the metallocarboxylic acid to the metallocarbonyl and H 2 O. The major reduction product is CO, but in the presence of trifluoroethanol, formate is also produced with 14% Faradaic efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Bond Dissociation Energies and Electronic Calculations on the Actinide Halides ThX and UX (X = Cl, Br, I)

Resonant two-photon ionization spectroscopy has been used to locate predissociation thresholds in the spectra of the actinide halides ThX and UX, where X = Cl, Br, and I. These predissociation thresholds are identified as the bond dissociation energies (BDEs) of the molecules. The resulting values show very similar BDEs for the corresponding ThX and UX species, with the thorium molecules being slightly more strongly bound: D 0 (ThCl) = 5.077(6) eV, D 0 (ThBr) = 4.391(4) eV, D 0 (ThI) = 3.537(8) eV, D 0 (UCl) = 4.989(3) eV, D 0 (UBr) = 4.313(3) eV, and D 0 (UI) = 3.449(8) eV. Here, the estimated error limit is given in parentheses in units of the last reported digit. Spinor-based coupled cluster calculations have also been carried out on the halides of this work, including also ThF and UF. Here, the final D 0 values after including contributions due to basis set incompleteness, outer-core-correlation, picture-change, and QED effects are within 0.04 eV of the present experimental values in each case.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enabling Efficient and Accurate Computational Studies of MOF Reactivity via QM/MM and QM/QM Methods

Electronic structure calculations can provide unique insight into metal–organic framework (MOF) reactivity and defect formation. Such calculations can be broadly categorized as utilizing either periodic or cluster models, each with their respective advantages and disadvantages. In the present study, we demonstrate how multiscale methods can leverage the advantages of both approaches to enable high levels of accuracy and computational efficiency in studies of MOF reactivity. Using defect formation in a zeolitic imidazolate framework (ZIF) as a prototypical example, we benchmark a quantum mechanics/molecular mechanics (QM/MM) scheme that enables highly efficient cluster-based calculations on MOFs. We demonstrate the importance of correctly accounting for the influence of both dative bond cleavage in the QM cluster and long-range mechanical coupling to the bulk to achieving accurate QM/MM studies of MOFs. We subsequently leverage these cluster models in a QM/QM scheme that goes beyond standard DFT to yield “gold-standard” correlated wave function results on MOFs at modest computational cost. Crucially, we find several cases in which the incorporation of these correlated corrections yields qualitatively important corrections over conventional DFT values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Surprising Dynamics of the McLafferty Rearrangement

We report femtosecond time-resolved measurements of the McLafferty rearrange- ment following the strong-field tunnel ionization of 2-pentanone, 4-methyl-2-pentanone, and 4,4- dimethyl-2-pentanone. The pump–probe-dependent yields of the McLafferty product ion are fit to a biexponential function with fast (~100 fs) and slow (~10 ps) time constants, the latter of which is faster for the latter two compounds. Following nearly instantaneous ionization, the fast time scale is associated with rotation of the molecule to a six-membered cyclic intermediate that facilitates transfer of the γ-hydrogen, while the ~50–100 times longer time scale is associated with a π-bond rearrangement and bond cleavage between the α- and β-carbons to produce the enol cation. Furthermore, these experimental measurements are supported by ab initio molecular dynamics trajectories, which further confirm the time scale of this important stepwise reaction in mass spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ring-Opening in the Actinide Cyclopropyl Complexes [Cp 3 U(2,2-Diphenylcyclopropyl)] n – ( n = 0, 1)

The reaction of [Cp 3 UCl] with in situ generated 1-lithium-2,2-dipenylcyclopropane results in the formation of [Cp 3 U(2,2-diphenylcyclopropyl)] (1) in good yield. Reduction of 1 with KC 8 , in the presence of 2.2.2-cryptand, results in the formation of a rare U(III) alkyl complex, [K(2.2.2-cryptand)][Cp 3 U(2,2-diphenylcyclopropyl)] (2). Thermolysis or photolysis of 1 for 10 d in toluene results in isomerization to the U(IV) η 1 -allyl complex, [Cp 3 U(η 1 -3,3-diphenylallyl)] (3). Moreover, photolysis of 2 in THF for 9 h at room temperature results in isomerization to the U(III) η 1 -allyl complex, [K(2,2,2-cryptand)][Cp 3 U(η 1 -3,3-diphenylallyl)] (4). Both 3 and 4 were fully characterized. Additionally, selective labeling of the C α positions of 1 and 2 with deuterium revealed that cyclopropyl ring-opening occurs via distal C–C bond cleavage via a hypothesized η 3 -allyl intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Flash Communication: Properties and Applications of a Pentavalent Bromoantimony Lewis Acid

While normally reluctant toward oxidation, SbBr 3 can be oxidized with 3,4,5,6-tetrachloro-1,2-benzoquinone (o-chloranil) in the presence of a Lewis base like the bromide anion or triphenylphosphine oxide (PPh 3 O) to form the tetrachlorocatecholate (cat Cl ) derivatives [SbBr 4 (cat Cl )] − ([2-Br] − ) and SbBr 3 (cat Cl )•OPPh 3 (2•OPPh 3 ), respectively. Structural, spectroscopic, and computational data indicate that the SbBr 3 (cat Cl ) fragment is similarly, if slightly less, Lewis acidic than the previously reported SbCl 3 (cat Cl ) fragment. The SbBr 3 /o-chloranil system, as well as its previously reported counterpart SbCl 3 /o-chloranil, were tested as Lewis acid catalysts for C−O bond metathesis and polycarbonate depolymerization. These results identified SbX 3 /o-chloranil pairs (X = Cl, Br) as simple main-group platforms for C−O bond cleavage chemistry.

Anions↗
DOE OSTI2022

Enhanced CO 2 Methanation Activity of Sm 0.25 Ce 0.75 O 2-δ –Ni by Modulating the Chelating Agents-to-Metal Cation Ratio and Tuning Metal–Support Interactions

Highly active and selective CO 2 methanation catalysts are critical to CO 2 upgrading, synthetic natural gas production, and CO 2 emission reduction. Wet impregnation is widely used to synthesize oxide-supported metallic nanoparticles as the catalyst for CO 2 methanation. However, as the reagents cannot be homogeneously mixed at an atomic level, it is challenging to modulate the microstructure, crystal structure, chemical composition, and electronic structure of catalysts via wet impregnation. In this work, a scalable and straightforward catalyst fabrication approach has been designed and validated to produce Sm 0.25 Ce 0.75 O 2-δ -supported Ni (SDC–Ni) as the CO 2 methanation catalyst. By varying the chelating agents-to-total metal cations ratio (C/I ratio) during the catalyst synthesis, we can readily and simultaneously modulate the microstructure, metallic surface area, crystal structure, chemical composition, and electronic structure of SDC–Ni, consequently fine-tuning the oxide–support interactions and CO 2 methanation activity. The optimal C/I ratio (0.1) leads to an SDC–Ni catalyst that facilitates C–O bond cleavage and significantly improves CO 2 conversion at 250 °C. A CO 2 -to-CH 4 yield of >73% has been achieved at 250 °C. Furthermore, a stable operation of >1500 hours has been demonstrated, and no degradation is observed. Extensive characterizations were performed to fundamentally understand how to tune and enhance CO 2 methanation activity of SDC–Ni by modulating the C/I ratio. The correlation of physical, chemical, and catalytic properties of SDC–Ni with the C/I ratio is established and thoroughly elaborated in this work. This study could be applied to tune the oxide–support interactions of various catalysts for enhancing the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Critical Hydrogen Coverage Effect on the Hydrogenation of Ethylene Catalyzed by δ-MoC(001): An Ab Initio Thermodynamic and Kinetic Study

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the promotion by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from CO and CO 2 to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to CH 4 and O 2 led to surface CH 3 O and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations which showed that water preferentially dissociates over the active Ce ions at the CeO 2 -Cu 2 O/Cu(111) interface. The adsorbed OH blocked O-O bond cleavage that would dehydrogenate CH 3 O to CO and CO 2 , and it directly converted this species to methanol, while O 2 now reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Differences in Mechanism and Rate of Zeolite-Catalyzed Cyclohexanol Dehydration in Apolar and Aqueous Phase

The rate of acid-base catalyzed dehydration of alcohols strongly depends on the solvent and the environment of the acid sites. In this work, we find that Brønsted acidic sites in large-pore zeolites, but not in medium-pore zeolites, catalyze cyclohexanol dehydration in decalin at significantly higher rates than hydrated hydronium ions in aqueous phase. Specifically, the difference in turnover rates between the two solvents amounts to two to three orders of magnitude on H-BEA and H-FAU, while being very modest (within a factor of 2) for H-MFI. Combining kinetic, isotopic tracer and 2H NMR measurements, it is established that cyclohexanol dehydration generally follows an E1-elimination pathway in decalin. A notable exception is the monomer dehydration route on H-MFI, which exhibits a much lower activation energy and a substantially negative activation entropy that appear to be associated with an E2-type mechanism. The C-O bond cleavage displays a dominant degree of rate control in decalin, which stands in contrast to deprotonation (C-H cleavage) being rate-limiting in aqueous-phase dehydration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Disordered, Sub-Nanometer Ru Structures on CeO 2 are Highly Efficient and Selective Catalysts in Polymer Upcycling by Hydrogenolysis

We report non-degradable polyolefin plastics pose severe environmental threats, and thus demand efficient upcycling technologies. In this work, we discovered that low-loading (= 0.25 wt%) Ru/CeO 2 exhibits remarkable catalytic performance in the hydrogenolysis of polypropylene (PP), polyethylene (PE), and n-C 16 H 34 that is superior to high-loading (= 0.5 wt%) Ru/CeO 2 . They possess high PP conversion efficiency (7-fold increase over current literature reports), low selectivity towards undesired CH 4 , and good isomerization ability. In the low-loading range, the intrinsic activity of Ru in PP hydrogenolysis increases as the particle size decreases, opposite of the trend in the high-loading range. Detailed characterization revealed that the abrupt changes in catalytic behaviors coincide with Ru species transitioning from well-defined to highly disordered structures in the low-loading domain. The disordered Ru species were shown to be sub-nanometer in size and cationic. Mechanistically, the regioselectivity and the rate dependence on hydrogen pressure of C-C bond cleavage are different on low- and high-loading Ru/CeO 2 , both explained by the higher coverage of adsorbed hydrogen (*H) on low-loading Ru/CeO 2 . This work uncovers the remarkable catalytic performance of highly disordered, sub-nanometer, cationic Ru species in polyolefin hydrogenolysis, opening immense opportunities to develop effective, selective, and versatile catalysts for plastic upcycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Plasmonic Energetic Electrons Drive CO 2 Reduction on Defective Cu 2 O

Plasmonic photoreduction of CO 2 is valuable for decarbonization and producing value-added chemicals. However, insights into the mechanisms of this reaction remain elusive, particularly regarding the roles of structural defects and their interplay with the nonequilibrium charge carriers. Here, we report density functional theory calculations on Cu 2 O, a prototype photocatalyst, through which we investigate CO 2 reduction over three defected facets to reveal the interfacial charge transfer and bond dynamics under plasmonic excitation. We find that the activation barrier of C–O bond cleavage decreases from 3.2 to about 1 eV, assisted by oxygen vacancies, and that the remaining barrier can be further reduced or eliminated at the plasmon-excited states when Cu 2 O is integrated with plasmonic metals. The regeneration of oxygen vacancies (by H 2 to form water) on Cu 2 O to complete the catalysis cycle is feasible and not affected by the energetic electrons. Furthermore, our calculations thus show the important synergistic effect of energetic electrons and point defects to promote CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Modeling the Effect of Surface Platinum–Tin Alloys on Propane Dehydrogenation on Platinum–Tin Catalysts

Uncertainty analysis, reported experimental literature data, and density functional theory were synthesized to model the effect of surface tin coverage on platinum-based catalysts for nonoxidative propane dehydrogenation to propylene. Here, this study tests four different platinum–tin skin surface models as potential catalytic sites, Pt 3 Sn/Pt(100), PtSn/Pt(100), Pt 3 Sn/Pt(111), and Pt 2 Sn/Pt(211), and compares them to the corresponding pure Pt surface sites using an uncertainty analysis methodology that uses BEEF-vdW with its ensembles (BMwE) to generate the uncertainty for the energies of the intermediates and transition states. One experimental data set with two experimental observations, selectivity to propylene and turnover frequency of propylene, was used as a calibration data set to evaluate the impact of the experimental data on informing the models. This study finds that the prior model for Pt 3 Sn/Pt(100) is the most active and Pt 2 Sn/Pt(211) is the most selective toward propylene. Active sites on the (100) facet have the highest probability of being responsible for C 1 and C 2 product formations (C–C bond cleavage). Increasing the Sn coverage on the (100) surface facet to a PtSn/Pt(100) active site leads to a significantly reduced rate and might explain the experimentally observed higher selectivity of Sn-doped catalysts relative to pure Pt catalysts. Next, this study finds that for all surfaces, except PtSn/Pt(100), the rate-controlling steps are the initial dehydrogenation steps alongside some partially rate-controlling second dehydrogenation steps. For PtSn/Pt(100), only the initial terminal dehydrogenation step to CH 3 CH 2 CH 2 * and second dehydrogenation steps are rate-controlling. Next, the calibrated models for all surfaces were found to be selective toward propylene production and model the reported turnover frequency successfully. Nevertheless, Pt 2 Sn/Pt(211) emerges as the active site with some (minor) evidence as the main active site based on Jeffreys’ scale interpretation of Bayes factors. This observation agrees with prior studies that also found step sites to be most likely the most relevant active sites for pure Pt catalysts. Overall, the results indicate that tin, in addition to affecting the binding strength of the adsorbed species, prevents deeper dehydrogenation (reducing coking) and cracking reactions through increasing activation barriers for unwanted side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Polystyrene Hydrogenolysis to High-Quality Lubricants Using Ni/SiO 2

Pyrolytic and light-activated oxidation processes are leading technologies for utilizing polystyrene (PS) wastes. These approaches exhibit poor selectivities, use complex reactors, and require solvents. Hydrogenolysis is effective for deconstructing polyolefins, but its application to PS feedstocks has been limited. Herein, we demonstrate Ni/SiO 2 catalysts to facilitate PS (M w ≈ 97 kDa) hydrogenolysis to produce lubricant base oils possessing group IV properties, achieving maximum yields of 70% within 6 h at 300 °C and 70 bar of H 2 . Gas, liquid, and oil product yields are stable across reaction conditions, whereas hydrogenation of the PS aromaticity and reduction of the molecular weight benefit from higher temperatures and H 2 pressures. Time-dependent experiments underscore the importance of elevated H 2 pressure, revealing that PS hydrogenolysis occurs sequentially, with aromatic ring hydrogenation preceding degradation of the C–C backbone. Kinetic measurements with 1,2-diphenylethane as a probe molecule demonstrate that ring hydrogenation pis 3 orders of magnitude faster than internal C–C bond cleavage over Ni/SiO 2 . Ni/SiO 2 proves to be effective in the hydrogenolysis of heavier PS polymers and rigid commercial PS products. Conversely, flexibility and foam PS feeds result in Ni/SiO 2 deactivation, attributed to performance additives. Unlike polyolefins, the process produces very little methane and other light hydrocarbons. Furthermore, these findings expand the applicability of hydrogenolysis to PS feedstocks, offering a versatile solution and broadening the range of high-value products from PS to include lubricant base oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Formation of (Rh–Fe)–FeO x Complex Sites Enables Methanol Synthesis from CO 2

Here, we addressed the challenges of designing catalysts for selective CO 2 hydrogenation by incorporating oxide Fe species onto Rh nanoparticles. Nanoscopic FeO x domains created a “reverse catalyst” structure (i.e., a metal oxide supported on a metal) that increased the density of interfacial sites compared to traditional supported catalysts. The contact between the metal nanoparticle and the oxide overlayer induced the formation of a surface Rh-Fe alloy that stabilize methoxy groups while suppressing hydrogenolysis to methane. Sites at FeO x -metal interfaces interact with CO 2 sevenfold stronger than sites on metal surfaces, show larger energy barriers to cleave the C-O bonds, and offer a barrierless pathway for hydrogenation of methoxy species to methanol. Consequently, the multifunctional sites over FeO x /Rh-Fe catalysts highlight and meet the requirements of a selective methanol catalyst: strong interaction with CO 2 to ensure high density of transition states; metal sites to activate and make hydrogen available to surface intermediates; and high energy barriers for C-O bond cleavage to form carbides. These synthesis and catalytic chemistries, demonstrated for Rh-Fe-FeO x interfaces, enable us to overcome the limitations to the design of methanol production catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗