Insights into the Improved High-Voltage Performance of Li-Incorporated Layered Oxide Cathodes for Sodium-Ion Batteries
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Poly (ethylene oxide) (PEO)-based solid-state polymer electrolytes (SPEs) show prospects in all-solid-state lithium metal batteries. However, they suffer from low ionic conductivity at room temperature and interfacial instability with high voltage cathodes for long-term cycling. In this work, top-down fluorinated PEOs (F-PEOs) for the all-solid-state electrolytes, which are scalable and cost-effective, are developed to improve the battery performance. We demonstrate, that by enhancing the disordering of the F-PEO matrix, the SPE achieves a maximum Li + conductivity of 1.1 x 10 -4 S cm -1 at 40 °C, which is 20 times higher than the baseline. By forming robust cathode/SPE and Li/SPE interfaces, the F-PEO-based SPEs demonstrate stable cycling in the LiFePO 4 /Li and LiNi 0·8 Mn 0·1 Co 0·1 O 2 /Li (3-4.4 V, 500 cycles, capacity retention of 91.6%) based all-solid-state batteries at 40 °C. Therefore, our work highlights the significance of "disordering engineering" for energy storage materials.
Non-flammable and high-temperature stable ionic liquid (IL)-based electrolytes could eliminate catastrophic battery failures and improve battery safety, but their poor electrochemical interaction with the LiNi x Mn y Co z O 2 (NMC) family of cathodes is a long-standing problem due to severe parasitic reactions at high temperature. Understanding surface and bulk structural mechanisms of NMC-type cathodes at elevated operational temperature is of paramount importance to facilitate stable electrochemical performance. Here, we report a non-flammable phosphonium IL-based cell chemistry that offers stable electrode-electrolyte interfaces, leading to electrochemical performance up to 125°C and high-temperature safety. We combine electrochemistry with multimodal X-ray spectroscopy methods to understand interfaces at elevated temperature (100°C). This nanoscale understating enables a proof-of-concept high-temperature cylindrical cell (14500), and the design achieves an average Coulombic efficiency of ≈99.5% up to 300 cycles at 100°C. The results ascertain the significance of depth-dependent degradation at the interface, guiding room-temperature Li-ion technology toward extreme-temperature applications.
All-solid-state batteries (ASSBs) have the potential to provide greater energy density than conventional batteries based on liquid electrolytes. Here, an operando ASSB cell setup for tender X-ray photoelectron spectroscopy (XPS) was developed, and the interface of a Ni-rich layered transition metal oxide cathode active material (CAM) and an Li 6 PS 5 Cl (LPSCl) solid electrolyte (SE) was evaluated during initial charge/discharge cycles. After validating the cell performance against a conventional pouch cell operated at high compression, intermittent galvanostatic cycling was performed, and XPS data were recorded as a function of state of charge (SOC). Upon the initial charge of the cell to ≈3.3 V Li , the LPSCl appears to decompose into LiCl, Li 3 PS 4 , and polysulfides, whose amount gradually increases with potential. Upon further charge, at a potential higher than ≈3.8 V Li , initially, present sulfate and sulfite impurities decompose, and at ≈74% SOC (corresponding to a cathode potential of ≈4.10 V Li ), surface reconstruction of the CAM particles due to lattice oxygen release is detected. In addition, at potentials beyond ≈4.6 V Li , a decrease of the S 1s counts of the sum of the LPSCl, the thiophosphate, and polysulfide species suggests the formation of elemental sulfur that is lost via sublimation into the vacuum chamber.
Among the emerging 'beyond lithium-ion' technologies for maximized sustainability, lithium-sulfur (Li-S) is a favoured chemistry because of its exceptional energy density from the conversion of sulfur, an element in abundant supply. However, the dissolution of several intermediate polysulfides formed during conversion leads to rapid performance degradation over cycling. Here, in this study, we address this issue by sulfurizing a hybrid polymer network with polyphosphazene and carbon as a cathode for Li-S batteries. With rich sites to re-bond and adsorb dissociative sulfur species, this hybrid polymer network circumvents the formation of soluble polysulfides and enables a unique, reversible inserting conversion reaction. Thus, our cathode delivers both high capacity (~900 mAh g -1 cathode ) and excellent cycling stability in Li-S coin cells, with a pouch cell demonstration of projected energy density of ~300 Wh kg -1 and 84.9% capacity retention after 150 cycles. The strategy can be extended to other cost-effective, recyclable polymers, advancing sulfur-based batteries towards practical energy storage application.
Our long-term goal is to improve the reliability of electrode materials and their ability to transport and store various metal ions for electrochemical energy storage applications. The main objective of this work was to investigate the intrinsic relationship between the role of alkali metal ions and electrochemically driven mechanical stability and kinetic properties of battery materials. The overall question was “What is the role of alkali metal ions on the electrochemical and mechanical behavior of cathode electrodes? Our guiding hypothesis was that intercalation of larger alkali metal ions (Na and K) inevitably alters the coupled transport-reaction processes during battery operation in organic electrolytes, leading to more intensive chemo-mechanical instabilities in cathode electrodes, resulting in rapid capacity fade. To validate the hypothesis, we experimentally characterized the reaction-transport processes and governing forces driving the instability of electrode materials in different alkali metal-ion environments. The project had three main tasks. The first one was to investigate intercalation-induced strains and associated stress generation, and their impact on structural deformations in composite cathode electrodes. The second task focused on identifying potential-dependent dynamic changes in the electrode-electrolyte interface in alkali metal ion batteries. The last task was focused on determining how larger alkali metal ions with slower diffusivity affect the transport-mechanics coupling at faster scan rates, compared to smaller ions with faster diffusivity in electrodes. We shortly provided the outcome of each task in the accomplishment section. This project produced 10 peer-reviewed publications (9 research papers and one review manuscript) and supported two Ph.D. students, who graduated from Oklahoma State University.
Sodium-metal batteries are an appealing, sustainable, low-cost alternative to lithium metal batteries due to the high abundance and theoretical specific capacity (1,165 mA h g -1 ) of sodium. However, the poor compatibility of the electrolyte with the cathode and anode leads to unstable electrode-electrolyte interphases. Here we introduce the concept of using a salt as a diluent, which enables the use of a single non-flammable solvent, such as trimethyl phosphate. By using sodium nitrate (NaNO 3 ) salt as a model diluent, we report a 1.1 M NaFSI-NaNO 3 -trimethyl phosphate electrolyte that forms a stable interface with sodium-metal anode. In addition, the formation of robust cathode-electrolyte interphases on Na(Ni 0.3 Fe 0.4 Mn 0.3 )O 2 cathode facilitates smooth phase transitions, thus leading to stable cycle life with a capacity retention of 80% over 500 cycles at C/5 rate in Na||Na(Ni 0.3 Fe 0.4 Mn 0.3 )O 2 cells. Further, the work demonstrates a promising approach towards the development of safe, low-cost, sustainable high-performance sodium-metal batteries. Electrolytes with non-flammable solvents are important for the safe operation of sodium-metal batteries. Here the authors report an electrolyte engineering approach, employing salts as a diluent, to enhance interfacial stability and overall safety.
Aqueous zinc-ion batteries (AZIBs) using ZnSO 4 aqueous electrolytes complement Li-ion batteries and offer high safety, low cost, and scalability. However, an inferior cycle life, attributed to the generation of basic layered double hydroxides (LDHs) on the cathode during cycling, hampers the development of AZIBs. Although Zn(CF 3 SO 3 ) 2 (Zn(OTf) 2 ) electrolytes demonstrate exceptional performance, their higher cost in comparison to ZnSO 4 offsets their electrochemical stability benefits. Toward this end, we propose a fluorinated interphase strategy to achieve a stable battery with ZnSO 4 electrolytes by in situ pre-constructing the cathode-electrolyte interphase (CEI) of ZnOTf-LDH on the cathode surface. Unlike ZnSO 4 - LDH, which obstructs the diffusion channel of zinc ions, ZnOTf-LDH facilitates the desolvation of zinc ions, thereby enhancing the cycling stability (over 50 cycles at a low current density of 200 mA g -1 ). Further, this work offers valuable insights into the degradation mechanism of AZIBs and provides an effective approach for developing stable and low-cost AZIBs.
Vanadium-based compounds have been widely used as electrode materials in aqueous zinc ion batteries (ZIBs) due to the multiple oxidation states of vanadium and their open framework structure. However, the solubility of vanadium in aqueous electrolytes and the formation of byproducts during the charge/discharge process cause severe capacity fading and limit cycle life. Here in this paper, we report an ultrathin HfO 2 film as an artificial solid electrolyte interphase (SEI) that is uniformly and conformally deposited by atomic layer deposition (ALD). The inactive hafnium(IV) oxide (HfO 2 ) film not only decreases byproduct (Zn 4 SO 4 (OH) 6 ·xH 2 O) formation on the surface of Zn 3 V 2 O 7 (OH) 2 ·2H 2 O (ZVO) but also suppresses the ZVO cathode dissolution in the electrolyte. As a result, the obtained HfO 2 -coated ZVO cathodes deliver higher capacity and better cycle life (227 mAh g –1 @100 mA g –1 , 90% retention over 100 cycles) compared with pristine ZVO (170 mAh g –1 @100 mA g –1 , 45% retention over 100 cycles). A mechanistic investigation of the role of HfO 2 is presented, along with data showing that our method constitutes a general strategy for other cathodes to enhance their performance in aqueous ZIBs.
The separation of electrode active materials from spent Li-ion batteries (LIBs) by froth flotation is challenging due to the changes in surface properties of electrode active materials from cycling as well as the presence of organic binders. In this work, the froth flotation separation of aged anode and cathode composite materials from spent LIBs was systematically investigated after the materials were heat treated. The results show that aged anode and cathode materials from spent LIBs can be well separated from each other after a heating process in air at 400 degrees C and at which some of the PVDF binder remains intact. The underlying mechanism was investigated by X-ray photoelectron spectroscopy (XPS), contact angle measurements, and scanning transmission electron microscopy (STEM) coupled with energy-dispersive X-ray spectroscopy (EDX). The results from the XPS and contact angle measurements show that there is a hydrophilic and oxygen-rich layer on the surface of aged anode materials. This hydrophilic surface, associated with the solid electrolyte interface (SEI) layer, impacts the froth flotation process significantly. The results also show that both the SEI layers and PVDF binder residues on the surface are removed at 400 degrees C for an hour, restoring the hydrophobicity of the anode materials, which, in turn, benefits the separation of anode and cathode materials. The STEM/EDX elemental analysis data confirms that there are 20 nm-thick oxygen-rich SEI layers on the surfaces, which can be removed after a heating process. The present result illustrates the significance of the SEI layers in flotation separation of electrode materials and sheds new lights into the future development of the recycling processes for the separation of anode and cathode composite materials from spent Li-ion batteries.
Next-generation lithium-ion batteries are expected to use solid electrolytes (SEs) to enable higher energy density and extreme fast-charge capabilities. One major mode of degradation at the cathode|SE interface is delamination between the cathode active materials and SEs, which leads to performance decay. Experimental observations indicate that implementation of interphase layers can minimize the cathode|SE delamination induced capacity fade. A multiscale computational methodology is developed here to investigate the applicability of boron substituted lithium carbonate (Li 2+x B x C 1–x O 3 , x = 0.5, or LBCO) to minimize the delamination at the cathode|SE interface. Atomistic simulations indicate that the fracture energies at both the cathode|LBCO and LBCO|SE interfaces are higher than those at the cathode|SE interface, which reduces the extent of delamination. Mesoscale simulations indicate that, apart from increasing the fracture energy, decreasing the evolution of strain energy by lowering the elastic modulus of the interphase layer can also minimize the extent of delamination at the cathode|SE interface. However, the adoption of an interphase layer with high ionic conductivity is necessary to minimize the ohmic losses during operation at higher current densities. This study provides guidance on selecting interphase layers with specific properties and thicknesses to minimize both interfacial delamination and impedance growth.
The high reactivity of sodium (Na) metal restricts its compatibility to ether-based electrolytes, while the poor oxidative stability of ethers precludes their coupling to high-voltage cathodes, fundamentally limiting the operating voltage and energy density of sodium–metal batteries (SMBs). We present here a coordination-asymmetry strategy to reconcile this thermodynamic mismatch by generating in situ an asymmetric fluoroalkoxylated organoborate anion, [FB(OCH(CF 3 ) 2 ) 3 ] − (BOF – ), via a Lewis acid–base adduct reaction in ether electrolyte. The asymmetric ligand architecture differentiates oxidative and fluorination pathways: oxidizable B–O moieties mediate controlled interfacial reconstruction, whereas the terminal B–F units supply fluorine for chemical passivation. This self-adaptive chemistry yields nanoscale, conformal, compositionally graded interphases: a boron-oxide/boron-oxycarbide-rich cathode-electrolyte interphase (CEI) that mitigates ether oxidation and a bilayered inorganic–organic solid–electrolyte interphase (SEI) that regulates Na deposition. The nanostructured interphases enable highly reversible Na plating/stripping with an average Coulombic efficiency (CE) of 99.98% and sustain stable 4.3 V operation of anode-free SMBs in oxidation-prone ether electrolytes. Furthermore, this work establishes asymmetric boron coordination as a molecular-level design principle for creating chemically adaptive interphases that overcome the redox asymmetry in energy-dense electrochemical systems.
Abstract The development of all‐solid‐state rechargeable batteries is plagued by a large interfacial resistance between a solid cathode and a solid electrolyte that increases with each charge–discharge cycle. The introduction of a plastic–crystal electrolyte interphase between a solid electrolyte and solid cathode particles reduces the interfacial resistance, increases the cycle life, and allows a high rate performance. Comparison of solid‐state sodium cells with 1) solid electrolyte Na 3 Zr 2 (Si 2 PO 4 ) particles versus 2) plastic–crystal electrolyte in the cathode composites shows that the former suffers from a huge irreversible capacity loss on cycling whereas the latter exhibits a dramatically improved electrochemical performance with retention of capacity for over 100 cycles and cycling at 5 C rate. The application of a plastic–crystal electrolyte interphase between a solid electrolyte and a solid cathode may be extended to other all‐solid‐state battery cells.
The development of all-solid-state rechargeable batteries is plagued by a large interfacial resistance between a solid cathode and a solid electrolyte that increases with each charge–discharge cycle. The introduction of a plastic–crystal electrolyte interphase between a solid electrolyte and solid cathode particles reduces the interfacial resistance, increases the cycle life, and allows a high rate performance. In this work, comparison of solid-state sodium cells with 1) solid electrolyte Na 3 Zr 2 (Si 2 PO 4 ) particles versus 2) plastic–crystal electrolyte in the cathode composites shows that the former suffers from a huge irreversible capacity loss on cycling whereas the latter exhibits a dramatically improved electrochemical performance with retention of capacity for over 100 cycles and cycling at 5 C rate. The application of a plastic–crystal electrolyte interphase between a solid electrolyte and a solid cathode may be extended to other all-solid-state battery cells.
High-nickel layered oxide cathodes and lithium-metal anode are promising candidates for next-generation battery systems due to their high energy density. Nevertheless, the instability of the electrode–electrolyte interphase is hindering their practical application. Localized high-concentration electrolytes (LHCEs) present a promising solution for achieving uniform lithium deposition and a stable cathode–electrolyte interphase. However, the limited choice of diluents and their high cost are restricting their implementation. Four novel cost-effective diluents and their performance with highly reactive LiNiO 2 cathode and Li-metal anode are reported here. The results show that all the LHCE cells exhibit a Coulombic efficiency of >99.38% in Li | Cu cells and a capacity retention of >85% in Li | LiNiO 2 cells after 250 cycles. Advanced characterizations unveil that the stable cell operation is due to well-tuned electrode–electrolyte interphases and Li deposition morphology. In addition, online electrochemical mass spectroscopy and differential scanning calorimetry reveal that the gas generation and heat-release are greatly reduced with the LHCEs presented. Altogether, the study provides new insights into the role of diluents in LHCEs and offers valuable guidance for further optimization of LHCEs for high energy density lithium-metal batteries.
A new orthochelated salt, lithium bis(monofluoromalonato)borate (LiBFMB), has been synthesized and purified for the first time for application in lithium ion batteries. The presence of fluorine in the borate anion of LiBFMB increases its oxidation potential and also facilitates ion dissociation, as reflected by the ratio of ionic conductivity measured by electrochemical impedance spectroscopy ( exp) and that by ion diffusivity coefficients obtained using pulsed field gradient nuclear magnetic resonance (PFG-NMR) technique ( NMR). Half-cell tests using 5.0 V lithium nickel manganese oxide (LiNi0.5Mn1.5O4) as a cathode and EC/DMC/DEC as a solvent reveals that the impedance of the LiBFMB cell is much larger than those of LiPF6 and LiBOB based cells, which results in lower capacity and poor cycling performance of the former. XPS spectra of the cycled cathode electrode suggest that because of the stability of the LiBFMB salt, the solid electrolyte interphase (SEI) formed on the cathode surface is significantly different from those of LiPF6 and LiBOB based electrolytes, resulting in more solvent decomposition and thicker SEI layer. Initial results also indicate that using high dielectric constant solvent PC alters the surface chemistry, reduces the interfacial impedance, and enhances the performance of LiBFMB based 5.0V cell.
The present disclosure is directed to fluoride (F) ion batteries and F shuttle batteries comprising an anode with a solid electrolyte interphase (SEI) layer, a cathode comprising a core shell structure, and a liquid fluoride battery electrolyte. According to some aspects, the components therein enable discharge and recharge at room-temperature.