Search NASA⌕ Search

SEARCH · Search NASA

Results for “cellulose”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Polyelectrolyte Complex Coacervate Assembly with Cellulose Nanofibers

Polyelectrolytes are used in paper manufacturing to increase flocculation and water drainage and improve mechanical properties. In this study, we examine the interaction between charged cellulosic nanomaterials and polyelectrolyte complex coacervates of weak polyelectrolytes, polyacrylic acid salt, and polyallylamine hydrochloride. We observe that by changing the order of addition of the polyelectrolytes to cellulose nanofibers (CNFs), we can tune the interactions between the materials, which in turn changes the degree of association of the coacervates to the CNFs and the rate at which they aggregate. Importantly for the papermaking process, when adding the polyelectrolytes sequentially to the CNFs, we found faster aggregation to the fibers and lower water retention values compared to those when preformed coacervates or CNFs by themselves were used. Coarse-grain molecular dynamic simulations further support the fundamental mechanism of aggregation by taking into consideration the interaction between cellulose and the complexes at the molecular level. The simulations corroborate the experimental observations by showing the importance of strong electrostatic interactions in aggregate formation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A grass-specific cellulose–xylan interaction dominates in sorghum secondary cell walls

Abstract Sorghum ( Sorghum bicolor L. Moench) is a promising source of lignocellulosic biomass for the production of renewable fuels and chemicals, as well as for forage. Understanding secondary cell wall architecture is key to understanding recalcitrance i.e. identifying features which prevent the efficient conversion of complex biomass to simple carbon units. Here, we use multi-dimensional magic angle spinning solid-state NMR to characterize the sorghum secondary cell wall. We show that xylan is mainly in a three-fold screw conformation due to dense arabinosyl substitutions, with close proximity to cellulose. We also show that sorghum secondary cell walls present a high ratio of amorphous to crystalline cellulose as compared to dicots. We propose a model of sorghum cell wall architecture which is dominated by interactions between three-fold screw xylan and amorphous cellulose. This work will aid the design of low-recalcitrance biomass crops, a requirement for a sustainable bioeconomy.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Grazing-incidence diffraction reveals cellulose and pectin organization in hydrated plant primary cell wall

Abstract The primary cell wall is highly hydrated in its native state, yet many structural studies have been conducted on dried samples. Here, we use grazing-incidence wide-angle X-ray scattering (GIWAXS) with a humidity chamber, which enhances scattering and the signal-to-noise ratio while keeping outer onion epidermal peels hydrated, to examine cell wall properties. GIWAXS of hydrated and dried onion reveals that the cellulose ( $$110/1\overline{1}0$$ 110 / 1 1 ¯ 0 ) lattice spacing decreases slightly upon drying, while the (200) lattice parameters are unchanged. Additionally, the ( $$110/1\overline{1}0$$ 110 / 1 1 ¯ 0 ) diffraction intensity increases relative to (200). Density functional theory models of hydrated and dry cellulose microfibrils corroborate changes in crystalline properties upon drying. GIWAXS also reveals a peak that we attribute to pectin chain aggregation. We speculate that dehydration perturbs the hydrogen bonding network within cellulose crystals and collapses the pectin network without affecting the lateral distribution of pectin chain aggregates.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Mineral-Ground Micro-Fibrillated Cellulose Reinforcement for Polymer Compounds

Additive Manufacturing (AM) is quickly becoming a mainstream, energy efficient manufacturing technique for complex and custom components. ORNL has taken polymer AM into the next level with Big Area Additive Manufacturing (BAAM). However, we need to develop the strength of AM materials (specifically polymers) to satisfy the mechanical requirements of structural parts. Also, it is crucial that the developed process can easily be scaled up to have a significant impact in the manufacturing industry of US. Furthermore, renewable, bio-derived AM materials are desirable from a sustainability perspective. In the first phase of this project the mechanical properties of polymer AM components were significantly improved developing a micro fibrillated cellulose (MFC)-reinforced composite material system that is derived from biomass and compatible with BAAM. Unfortunately, the improvements were observed only with freeze-dried MFCs, and freeze-drying is a very slow process and is not industrially scalable. Furthermore, MFCs were not available in large quantities at low cost. However, FiberLean has reached 12,000 tons/year capacity (60,000 tons/year including the minerals). FiberLean offers MFCs at a scale and order of magnitude lower price than current market participants. With their recently developed novel (patent pending) drying process FiberLean can achieve over 50% solid content commercially. In the 2nd phase of the project, the original objective was to investigate this new novel drying process along with compounding with different formulations to optimize and adapt to large scale additive manufacturing. However, the compounded materials prepared via this approach were very brittle and demonstrated poor mechanical performance. Therefore, the project was focused more on a scalable chemical surface modification of MFCs to enable their drying via conventional oven process with minimal agglomeration and better dispersion in PLA polymer matrix. Fiberlean and ORNL have worked together in this project to develop mineral-ground microfibrillated cellulose (MFC) - reinforced additive manufacturing feedstock materials with significantly improved mechanical properties. Properly surface modified and dried Fiberlean cellulose microfibrils led to tensile strength increases up to ~40% and elastic modulus increases up to 70% with the addition of 30% MFC into PLA matrix. The work has led to a high impact journal article and a provisional patent. Opportunities for a follow up work to demonstrate the technology in large scale and application of it to AM applications are currently being searched.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Development of nonflammable cellulosic foams

The development of a moldable cellulosic foam for use in Skylab instrument storage cushions is considered. Requirements include density of 10 lb cu ft or less, minimal friability with normal handling, and nonflammability in an atmosphere of 70 percent oxygen and 30 percent nitrogen at 6.2 psia. A study of halogenated foam components was made, including more highly chlorinated binders, halogen-containing additives, and halogenation of the cellulose. The immediate objective was to reduce the density of the foam through reduction in inorganic phosphate without sacrificing flame-retarding properties of the foams. The use of frothing techniques was investigated, with particular emphasis on a urea-formaldehyde foam. Halogen-containing flame retardants were deemphasized in favor of inorganic salts and the preparation of phosphate and sulphate esters of cellulose. Utilization of foam products for civilian applications was also considered.

Luttinger, M.↗
NASA NTRS1989

The case for cellulose production on Mars

From examining the consequences of not requiring that all wastes from life support be recycled back to the food plants, it is concluded that cellulose production on Mars could be an important input for many nonmetabolic material requirements on Mars. The fluxes of carbon in cellulose production would probably exceed those in food production, and therefore settlements on Mars could utilize cellulose farms in building a Mars infrastructure.

Volk, Tyler↗
NASA NTRS1998

Microbial Cellulose Assembly in Microgravity

Based on evidence indicating a possible correlation between hypo-gravity conditions and alteration of cellulose production by the gram negative bacterium, Acetobacter xylinum, a ground-based study for a possible long term Space Shuttle flight has been conducted. The proposed experiment for A. xylinum aboard the Shuttle is the BRIC (Biological Research in a Canister), a metal container containing spaces for nine Petri plates. Using a common experimental design, the cellulose production capability as well as the survivability of the A. xylinum strains NQ5 and AY201 have been described. It should now be possible to use the BRIC for the first long term microgravity experiments involving the biosynthesis of cellulose.

Brown, R. Malcolm, Jr.↗
NASA NTRS2003

Light Weight Biomorphous Cellular Ceramics from Cellulose Templates

Bimorphous ceramics are a new class of materials that can be fabricated from the cellulose templates derived from natural biopolymers. These biopolymers are abundantly available in nature and are produced by the photosynthesis process. The wood cellulose derived carbon templates have three- dimensional interconnectivity. A wide variety of non-oxide and oxide based ceramics have been fabricated by template conversion using infiltration and reaction-based processes. The cellular anatomy of the cellulose templates plays a key role in determining the processing parameters (pyrolysis, infiltration conditions, etc.) and resulting ceramic materials. The processing approach, microstructure, and mechanical properties of the biomorphous cellular ceramics (silicon carbide and oxide based) have been discussed.

Singh, Mrityunjay↗
NASA NTRS1998

Processes for treating cellulosic material

Disclosed are processes for pretreating cellulosic materials in liquid water by heating the materials in liquid water at a temperature at or above their glass transition temperature but not substantially exceeding 220.degree. C., while maintaining the pH of the reaction medium in a range that avoids substantial autohydrolysis of the cellulosic materials. Such pretreatments minimize chemical changes to the cellulose while leading to physical changes which substantially increase susceptibility to hydrolysis in the presence of cellulase.

Ladisch, Michael R.↗
DOE OSTI2024

Cellulosic gels, films and composites including the gels, and methods of forming same

Disclosed are cellulose-based 5 flexible aerogels and xerogels containing bacterial cellulose nanorods, ribbons, fibers, and the like, wherein the gels have tunable optical, heat transfer, and stiffness properties. Further disclosed are highly transparent and flexible cellulose nanofiber-polysiloxane composite aerogels featuring enhanced mechanical robustness, tunable optical anisotropy, and low thermal conductivity.

Smalyukh, Ivan I.↗
DOE OSTI2026

Harnessing plant‐based platform for low‐cost cellulosic sugar recovery from bioenergy crops

The price of pure cellulase enzyme for the recovery of fermentable cellulosic sugars is one of the major challenges that limit the commercialization of second-generation biofuels and bio-based products. This work shows a means to greatly reduce the cost of cellulases. The abundant capacity of plants to synthesize and hyperaccumulate transgenic proteins in their plastids has been demonstrated for two gene constructs using either NPT II or Tet C to regulate the expression of bacterial cellulase Cel6A. Previously, the expression of Cel6A to 20–35% of total soluble leaf protein in tobacco was shown in two consecutive field trials. Moving forward, the key challenge was the extraction of active enzymes from the transgenic tobacco leaves hyperaccumulating bacterial cellulases in a cost-effective manner. The study showed that unpurified crude extracts of NPT II and Tet C transgenic tobacco leaves recovered ~23% and ~29% w/w cellulosic sugars from energycane bagasse, respectively. A supplementation of as low as 25% of purified commercial cellulase improved the glucose recovery by 2.9 times (~85% w/w) compared to 100% crude extract, which is comparable to the glucose recovery obtained by commercial cellulases, thereby suggesting a reduced requirement of commercial cellulases leading to a cost reduction of 75% for biorefineries. Assuming a stable 40% cellulase yield in total soluble protein under field conditions and multiple harvests (one to three) a year, the study estimates that the potential cost for saccharification of 1 t of lignocellulosic biomass can be reduced to 67–200 USD by using crude leaf extracts of transgenic tobacco.

biofuel↗
DOE OSTI2023

Functional group effect of chemically modified microcrystalline methyl cellulose on thermoplastic polyurethane composites

Microcrystalline cellulose (MCC) is a promising bio-based filler for lightweight yet mechanically high-performance eco-polymer composites because of its low density and high biocompatibility. However, intermolecular hydrogen bonding among MCC is stronger than the polymer–filler interactions, which deteriorate the mechanical properties of the composites. Herein, we investigated the effects of functional groups on the mechanical properties of composites by scrutinizing chemically modified microcrystalline methyl cellulose (m-MMC) with three different substitution levels of hydroxyl group to hydroxypropyl (HP) group: no-, low-, and high-level substitution (HP-0, HP-low, and HP-high). The degree of HP substitution of m-MMC was quantitatively measured by CP/MAS NMR analysis. The relatively bulky HP groups interrupted the filler–filler intermolecular interactions and reduced the crystallinity and density of m-MMC, as evident from X-ray diffractometer and pycnometer data, respectively. For scalable production of the composites, the m-MMC were compounded with thermoplastic polyurethane (TPU) by a twin-screw extruder at concentrations between 0.5 and 10 wt%. Despite its low filler concentration, the toughness of m-MMC/TPU composites was remarkably enhanced, up to 28% (229.2 to 294.4 MJ/m 3 ) at 0.5 wt% loading of HP-low, owing to the enhanced polymer–filler interactions. In conclusion, the fundamental understanding on structure–property relationships will provide insights for designing of mechanically robust yet eco-friendly polymer composites.

composites↗
DOE OSTI2023

Sum frequency generation (SFG) microscopy analysis of cellulose microfibrils in Physcomitrium patens gametophore leaf

Physcomitrium patens is a good model system to study the structure and function relationships of cellulose synthase (CESA) proteins since the life cycle of moss is short and genetic modification is relatively easy. Here, we report a microscopic sum frequency generation (SFG) vibrational spectroscopy analysis of P. patens leaves in a never-dried and fully hydrated state. Using imaging-SFG spectroscopy, cellulose microfibril (CMF) organization in the midrib, laminar, and marginal regions of the gametophore leaf were analyzed separately. The azimuth angle dependence of SFG signals showed that CMFs in the thick stereid cell walls in the midrib are highly aligned along the microfibril angle of ~ 30° with respect to the midrib axis. CMFs in the marginal cell walls also are preferentially tilted toward the longitudinal axis of leaf with the characteristic features of secondary cell walls. On the other hand, CMFs in the lamina cell walls have no preferential orientation and their SFG intensity is low, which is consistent with the primary cell wall property. Finally, the thick walls and highly aligned CMFs in the midrib and marginal cells of P. patens leaves are consistent with their support function.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

A Simple Approach for the Synthesis of Cellulose Nanofiber Reinforced Chitosan/PVP Bio Nanocomposite Film for Packaging

The development of chitosan-based food packaging film has been increasing due to its wider availability, biodegradability, low-cost, and renewability. The purpose of this study was to develop cellulose nanofibers (CNFs) reinforced Chitosan/PVP(CHP) green bio nanocomposite film by solvent casting method with enhanced barrier and mechanical property. CNFs of dimension 9–11 nm and 100–200 nm were extracted from jute fibers by directly treating it with HNO{sub 3}–NaNO{sub 2} mixture. Bio nanocomposite films were synthesized with various concentrations of CNFs and evaluated using SEM, TGA/DTG and XRD to analyze the morphology, thermal behavior and crystallinity of bio nanocomposite films. SEM analysis revealed the uniform dispersion of CNFs in CHP matrix. Thermal stability of prepared bio nanocomposite films was improved with the loading of 5 wt% of cellulose nanofibers. ATR(FT-IR) spectra shows physical interaction between all the components of bio nanocomposite film. The bio nanocomposite films were also characterized for physical property like thickness, mechanical testing and barrier properties. The addition of CNFs significantly enhanced the mechanical property of bio nanocomposite films. Furthermore, water and oxygen transmission rate of bio nanocomposite film decreased with the increase in CNFs concentration. Overall the performed studies confirmed, the use of CNFs in polymer matrix makes it possible to produce a flexible, transparent, thermally stable bio nanocomposite film with enhanced mechanical and barrier properties for food packaging applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Cellulose regulated lignin/cellulose-based carbon materials with hierarchical porous structure for energy storage

Lignin has gained extensive attention as an ideal carbon precursor due to its abundance and high carbon content. However, the agglomeration of lignin and additional corrosive and unrecyclable reagents in direct pyrolysis still limit the development of lignin-based porous carbons. Herein, a facile and eco-friendly strategy was proposed to fabricate hierarchical porous lignin/cellulose-based carbon materials (LCs). In the process, cellulose nanofibrils acted as the skeleton of the bio-aerogels, which supported lignin and benefit the preparation of the LCs. Moreover, the specific surface area and the graphitization degree of LCs can be regulated by varying the cellulose content. Without activation, the bio-based carbon material (LC30) had a high specific surface area of 1770 m 2 g –1 , which displayed high specific capacitance of 216.2 F g –1 at the current density of 0.5 A g –1 . The supercapacitor based on LC30 also showed outstanding energy density of 12.3 Wh kg –1 at the power density of 50 W kg –1 . The sustainable raw material, simple and harmless preparation process, and remarkable electrochemical performance enable LC30, a promising supercapacitor electrode for energy storage.

25 ENERGY STORAGE↗
DOE OSTI2020

Chitin- and cellulose-based sustainable barrier materials: a review

Abstract The accumulation of synthetic plastics used in packaging applications in landfills and the environment is a serious problem. This challenge is driving research efforts to develop biodegradable, compostable, or recyclable barrier materials derived from renewable sources. Cellulose, chitin/chitosan, and their combinations are versatile biobased packaging materials because of their diverse biological properties (biocompatibility, biodegradability, antimicrobial properties, antioxidant activity, non-toxicity, and less immunogenic compared to protein), superior physical properties (high surface area, good barrier properties, and mechanical properties), and they can be assembled into different forms and shapes (powders, fibers, films, beads, sponges, gels, and solutions). They can be either assembled into packaging films or used as fillers to improve the properties of other biobased polymers. Methods such as preparation of composites, multilayer coating, and alignment control are used to further improve their barrier, mechanical properties, and ameliorate their moisture sensitivity. With the growing application of cellulose and chitin-based packaging materials, their biodegradability and recyclability are also discussed in this review paper. The future trends of these biobased materials in packaging applications and the possibility of gradually replacing petroleum-based plastics are analyzed in the “Conclusions” section.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Xylose metabolic engineering of Issatchenkia orientalis for 3-hydroxypropionic acid production from cellulosic hydrolysate without nutrient supplementation

Bioconversion of lignocellulosic biomass offers a promising alternative to petroleum-based chemical production. However, inefficient xylose utilization and toxic compounds in cellulosic hydrolysate limit microbial fermentation, as the hydrolysate contains substantial amounts of xylose in addition to glucose. To address these challenges, we engineered Issatchenkia orientalis to produce 3-hydroxypropionic acid (3-HP) directly from sorghum hydrolysate under low-pH conditions. A heterologous xylose utilization pathway consisting of XYL1, XYL2, and XYL3 from Scheffersomyces stipitis was introduced into an engineered 3-HP producing strain, enabling efficient conversion of xylose to 3-HP. The engineered strain produced 46.8 g/L 3-HP from sorghum hydrolysate without nutrient supplementation. To eliminate the lag phase under low-pH conditions, fermentation was conducted at pH 6.0 for the first three days, after which pH control was discontinued and in situ 3-HP accumulation buffered the culture. This partial pH control strategy increased 3-HP productivity by 55% from 0.20 to 0.31 g/L∙h, while maintaining low-pH conditions. Introducing an additional copy of XYL2 further increased 3-HP titer to 53.5 g/L and the yield by 33%, from 0.30 to 0.40 g/g sugars, with pH reaching 4.5 at the end of fermentation. This represents one of the highest reported 3-HP titers and yields from cellulosic hydrolysate without additional nutrient supplementation. This work demonstrates a nutrient-independent and low-pH bioprocess for upgrading lignocellulosic hydrolysate into 3-HP, highlighting the industrial potential of engineered xylose-utilizing I. orientalis for sustainable production of platform chemicals from renewable feedstocks.

3-Hydroxypropionic acid↗