Search NASA⌕ Search

SEARCH · Search NASA

Results for “change point”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Simulation study of particle transport by weakly coherent mode in the Alcator C-Mod tokamak

A simulation study has been conducted of the physical mechanisms behind the weakly coherent mode (WCM) and its produced particle transport in the I-mode edge plasmas by using the BOUT++ code. The WCM is identified in our simulations by its poloidal and radial distributions as well as its frequency and wavenumber spectra. Its produced radial particle flux is calculated and compared with the experimental value. The good agreement indicates that the WCM is an important particle transport channel in the I-mode pedestal. It is found that the WCM can transport particles across the strong outer shear layer of the Er well established in the formation of I-mode, based on which a possible explanation is provided why I-mode does not feature a density pedestal. The key point lies in the change of the cross-phase between the electric potential and density fluctuations induced by the E × B Doppler shift. In the strong shear layer, although the electric potential fluctuation is significantly suppressed, the cross-phase is close to π/2, resulting in a strong drive of the density fluctuation and particle transport. To identify the physical nature of the WCM, a linear dispersion relation for drift Alfvén modes is derived in the slab geometry. A drift Alfvén wave instability is found to have similar dependence to the simulated linear instability behind the WCM on the resistivity and the parallel electron pressure gradient and thermal force terms in the parallel Ohm's law.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Laser melting modes in metal powder bed fusion additive manufacturing

In laser powder bed fusion additive manufacturing of metals, extreme thermal conditions create many highly dynamic physical phenomena such as vaporization and recoil, Marangoni convection, and protrusion and keyhole instability. Collectively however, the full set of phenomena is too complicated for practical applications and, in reality, the melting modes are used as a guideline for printing. With increasing local material temperature beyond the boiling point, the mode can change from conduction to keyhole. These mode designations ignore laser-matter interaction details but in many cases are adequate to determine the approximate microstructures and hence the properties of the build. To date, no consistent, common, and coherent definitions have been agreed upon because of historic limitations in melt pool and vapor depression morphology measurements. Here, we distinguish process-based definitions of different melting modes from those based on postmortem evidence. The latter are mainly derived from the transverse cross-sections of the fusion zone, whereas the former come directly from time-resolved x-ray imaging of melt pool and vapor depression morphologies. These process-based definitions are more strict and physically sound, and they offer new guidelines for laser additive manufacturing practices and create new research directions. Further, we highlight the significance of the keyhole, which substantially enhances the laser energy absorption by the melt pool. Recent studies strongly suggest that stable-keyhole laser melting enables efficient, sustainable, and robust additive manufacturing. The realization of this scenario demands the development of multiphysics models, signal translations from morphology to other feasible signals, and in-process metrology across platforms and scales.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Characterization of Inlet Guide Vane Performance for Discharge Compressor Operation near the Dome of an sCO 2 Pumped Heat Energy Storage

Southwest Research Institute® (SwRI®) developed and tested a Variable Inlet Guide Vane (IGV herein) assembly on an integrally-geared sCO 2 compressor (IGC) to demonstrate compressor operation at both the compressor design point and near the dome and to define the operating limits of the compressor by monitoring for two-phase flow, flow turbulence from the IGVs, and compressor choke and surge as the CO 2 inlet temperature is varied. Performance testing was conducted on an existing integrally-geared, two-stage main compressor designed for near-critical-point operation with CO 2 . This testing campaign validated the IGV design and operation, as well as improved the understanding and confidence in operating compressors and predicting performance characteristics near the critical point where fluid properties change rapidly with temperature. In addition to improving the robust operating limits of an sCO 2 compressor, the development of an IGV for the IGC system improved off-design compressor efficiency by 12%.

25 ENERGY STORAGE↗
DOE OSTI2025

Evaluation of Technologies to Mitigate the Presence of Gaseous Elemental Mercury in Waste Disposal Containers

A study was conducted to evaluate sorbent technologies that can mitigate the presence of elemental mercury (Hg⁰) in waste containers for mercury-contaminated debris (MCD). Decontamination and demolition (D&D) activities at the Y-12 National Security Complex (Y-12) and other U.S. Department of Energy (DOE) Oak Ridge Reservation (ORR) facilities generate MCD requiring offsite disposal. The debris is packaged in appropriate waste containers and may be temporarily stored onsite prior to transport for treatment and/or disposal. During transportation of loads that had no visible liquid Hg at the point of origin, temperature changes can cause Hg⁰ to evaporate, condense, and form droplets on container walls. Furthermore, vibration during transportation could cause beads of Hg to be released from the debris, container walls, and ceiling, resulting in pools of liquid Hg⁰ on the container floor. Waste acceptance criteria (WAC) limitations for commercial disposal facilities, the Nevada National Security Site (NNSS), and ORR mixed low-level waste landfills prohibit the presence of any free liquids in containers identified as a solid waste form. Potential solutions to mitigate the presence of residual liquids that could be formed through vapor condensation include the use of sorbents or similar materials to capture and stabilize volatile Hg⁰ vapors and thus ensure compliance with landfill WAC requirements. This report summarizes data from small-scale laboratory experiments conducted to evaluate sorbent materials for Hg⁰ vapor suppression and sorption of liquid Hg⁰ that could form under relevant transportation and disposal conditions. A series of experiments was conducted to evaluate commercial sorbent materials and their effectiveness for Hg⁰ sorption across a temperature range from 19.4°C to 60°C. The impact of residual moisture on sorption was investigated under relevant conditions, and leaching tests were performed to assess the stability of Hg⁰ captured sorbent materials. The results provide estimates for sorbent quantities needed for a given Hg⁰ mass loading based on experimental results exposing sorbents to gaseous and liquid Hg⁰ at various mass ratios. Overall, sorbents that were most effective for Hg⁰ vapor suppression were brominated activated carbons, mackinawite-based sorbents coated on vermiculite, and sulfur-modified granular activated carbon. Elevated temperatures and moisture conditions did not result in significant increases of Hg⁰ headspace concentrations, and the materials also demonstrated high sorption capacities for the sorption of liquid Hg⁰.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Use of Machine Learning for Signature Development in a Multi-Sensor Environment for Safeguard Applications of Solvent Extraction Processes

Idaho National Laboratory is constructing the Special Nuclear Material test bed (Beartooth) for research and development pertaining to nuclear fuel processing operations using centrifugal contactors. Beartooth will enable give researchers the opportunity to study the dissolution, separation, and conversion of special nuclear materials (e.g., plutonium, enriched uranium, and thorium). As a lead-in to Beartooth, this project constructed a test bed to study the process and equipment behavior with real time series data collection using a variety of non-traditional sensors, in order to identify process failures and label them as either accidental or purposeful, thus enhancing nuclear nonproliferation stewardship. The measurement sources in this test bed include vibration, acoustic, current, flow, colorimetric, and thermal data. These measurements vary in terms of magnitude, frequency, and location. This information will be combined and used within data-driven machine-learning methods to detect operation condition changes that are either intentional (i.e., changes in operating set points) or malicious (i.e., flow diversion) in nature. This presentation covers the data processing and signature development activities necessary for utilizing this heterogeneous dataset to classify process anomalies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Fiber and bundle orientations, matrix rich regions, and mechanical properties of fiber reinforced composites using thermal digital image correlation

Methods for assessing fiber and bundle orientations and mechanical properties of fiber reinforced composite materials using Thermal Digital Image Correlation (TDIC) are disclosed. In some examples, the method comprises exposing the composite material to a temperature change; imaging the composite material at a plurality of time points before, during and/or after the temperature change; and assessing the characteristic of the composite material based on the imaging. In others, temperature changes naturally occur during the cooling process after manufacturing can be employed for this method such as compression molding process, injection molding process, resin transfer molding processes and its variants.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of Source Geometry on Detector Response Matrix Efficiency: Simulations of the PFUNS-MUSiC Experiments

This work looks at two different bare highly enriched uranium (HEU) systems, configuration one from Measurements of Uranium Subcritical and Critical (MUSiC) and Prompt Fission Uranium Neutron Spectrum (PFUNS) to see the effect geometry has on detector efficiency and the response matrix. The distance from the multiplying source, the medium between the source and detector, and the geometry of the source all play a part in the efficiency of the detector. These factors are especially important when performing spectrum unfolding. Spectrum unfolding is a process used to reconstruct a true spectrum from measured detector response data. It involves interpreting a set of measured values, such as a light signal from a scintillator, to recover the original neutron energy spectrum. This leads to the question, how much will the efficiency of a detector change when you measure a point source compared to an extended source? The distance and solid angle from the source to the detector may be different. It may only be a minuscule change, but in the spectrum unfolding process it can have a considerable effect on the unfolded spectrum

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Unusual magnetotransport in twisted bilayer graphene from strain-induced open Fermi surfaces

Anisotropic hopping in a toy Hofstadter model was recently invoked to explain a rich and surprising Landau spectrum measured in twisted bilayer graphene away from the magic angle. Suspecting that such anisotropy could arise from unintended uniaxial strain, we extend the Bistritzer–MacDonald model to include uniaxial heterostrain and present a detailed analysis of its impact on band structure and magnetotransport. We find that such strain strongly influences band structure, shifting the three otherwise-degenerate van Hove points to different energies. Coupled to a Boltzmann magnetotransport calculation, this reproduces previously unexplained nonsaturating B 2 magnetoresistance over broad ranges of density near filling ν = ± 2 and predicts subtler features that had not been noticed in the experimental data. In contrast to these distinctive signatures in longitudinal resistivity, the Hall coefficient is barely influenced by strain, to the extent that it still shows a single sign change on each side of the charge neutrality point—surprisingly, this sign change no longer occurs at a van Hove point. The theory also predicts a marked rotation of the electrical transport principal axes as a function of filling even for fixed strain and for rigid bands. More careful examination of interaction-induced nematic order versus strain effects in twisted bilayer graphene could thus be in order.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Coastal typologies and surface and subsurface characteristics of the Alaskan Beaufort Sea Coast

This dataset was generated to classify the Alaskan Beaufort Sea Coast (ABSC) into a set of distinct coastal typologies, to understand the surface and subsurface characteristics and variability of the ABSC, and to quantify relationships between these characteristics and historical rates of shoreline change. This geospatial dataset contains two csv files of points along the ABSC at a 50 m spacing, one for points sheltered by a barrier island and one for points exposed to the open ocean. Each point has a lat/lon location, and we have attributed to each point average values for elevation, historical long-term shoreline change rates, shoreline orientation, landcover, mean annual ground temperature, geomorphic unit, lithology, geology, ecological landscape unit, maximum thaw settlement potential, massive ice content, and segregated ice content. Each point is also assigned to one of 16 coastal typologies, determined by a hierarchical clustering algorithm on the elevation, shoreline change, orientation, and ground temperature data. There are 9 sheltered typologies and 7 exposed typologies, identified by an integer label in the last column of each csv file. The other two csv files contain the integer IDs and classes for the landcover and geomorphology datasets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Bacterial Membranes Are More Perturbed by the Asymmetric Versus Symmetric Loading of Amphiphilic Molecules

Characterizing the biophysical properties of bacterial membranes is critical for understanding the protective nature of the microbial envelope, interaction of biological membranes with exogenous materials, and designing new antibacterial agents. Presented here are molecular dynamics simulations for two cationic quaternary ammonium compounds, and the anionic and nonionic form of a fatty acid molecule interacting with a Staphylococcus aureus bacterial inner membrane. The effect of the tested materials on the properties of the model membranes are evaluated with respect to various structural properties such as the lateral pressure profile, lipid tail order parameter, and the bilayer’s electrostatic potential. Conducting asymmetric loading of molecules in only one leaflet, it was observed that anionic and cationic amphiphiles have a large impact on the Staphylococcus aureus membrane’s electrostatic potential and lateral pressure profile as compared to a symmetric distribution. Nonintuitively, we find that the cationic and anionic molecules induce a similar change in the electrostatic potential, which points to the complexity of membrane interfaces, and how asymmetry can induce biophysical consequences. Finally, we link changes in membrane structure to the rate of electroporation for the membranes, and again find a crucial impact of introducing asymmetry to the system. Understanding these physical mechanisms provides critical insights and viable pathways for the rational design of membrane-active molecules, where controlling the localization is key.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Extreme metrics from large ensembles: investigating the effects of ensemble size on their estimates

Abstract. We consider the problem of estimating the ensemble sizes required to characterize the forced component and the internal variability of a number of extreme metrics. While we exploit existing large ensembles, our perspective is that of a modeling center wanting to estimate a priori such sizes on the basis of an existing small ensemble (we assume the availability of only five members here). We therefore ask if such a small-size ensemble is sufficient to estimate accurately the population variance (i.e., the ensemble internal variability) and then apply a well-established formula that quantifies the expected error in the estimation of the population mean (i.e., the forced component) as a function of the sample size n, here taken to mean the ensemble size. We find that indeed we can anticipate errors in the estimation of the forced component for temperature and precipitation extremes as a function of n by plugging into the formula an estimate of the population variance derived on the basis of five members. For a range of spatial and temporal scales, forcing levels (we use simulations under Representative Concentration Pathway 8.5) and two models considered here as our proof of concept, it appears that an ensemble size of 20 or 25 members can provide estimates of the forced component for the extreme metrics considered that remain within small absolute and percentage errors. Additional members beyond 20 or 25 add only marginal precision to the estimate, and this remains true when statistical inference through extreme value analysis is used. We then ask about the ensemble size required to estimate the ensemble variance (a measure of internal variability) along the length of the simulation and – importantly – about the ensemble size required to detect significant changes in such variance along the simulation with increased external forcings. Using the F test, we find that estimates on the basis of only 5 or 10 ensemble members accurately represent the full ensemble variance even when the analysis is conducted at the grid-point scale. The detection of changes in the variance when comparing different times along the simulation, especially for the precipitation-based metrics, requires larger sizes but not larger than 15 or 20 members. While we recognize that there will always exist applications and metric definitions requiring larger statistical power and therefore ensemble sizes, our results suggest that for a wide range of analysis targets and scales an effective estimate of both forced component and internal variability can be achieved with sizes below 30 members. This invites consideration of the possibility of exploring additional sources of uncertainty, such as physics parameter settings, when designing ensemble simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Spin Berry points as crucial for ultrafast demagnetization

Laser-induced ultrafast demagnetization has puzzled researchers around the world for over two decades. Intrinsic complexity in electronic, magnetic and phononic subsystems is difficult to understand microscopically. So far, it is not possible to explain demagnetization using a single mechanism, which suggests a crucial piece of information still missing. In this paper, we return to a fundamental aspect of physics: spin and its change within each band in the entire Brillouin zone. We employ face-centered cubic (fcc) Ni as an example and use an extremely dense k mesh to map out spin changes for every band close to the Fermi level along all the high symmetry lines. To our surprise, spin angular momentum at some special k points abruptly changes from [Formula: see text] to [Formula: see text] simply by moving from one crystal momentum point to the next. This explains why intraband transitions, which the spin superdiffusion model is based upon, can induce a sharp spin moment reduction, and why electric current can change spin orientation in spintronics. These special k points, which are called spin Berry points [M. V. Berry, Proc. R. Soc. Lond. A 393 (1984) 45], are not random and appear when several bands are close to each other, so the Berry potential of spin majority states is different from that of spin minority states. Although within a single band, spin Berry points jump, when we group several neighboring bands together, they form distinctive smooth spin Berry lines. It is the band structure that disrupts those lines. Spin Berry points are crucial to laser-induced ultrafast demagnetization and spintronics.

Physics↗
DOE OSTI2022

GW-PINN: A deep learning algorithm for solving groundwater flow equations

Machine learning methods provide new perspective for more convenient and efficient prediction of groundwater flow. In this study, a deep learning method “GW-PINN” without labeled data for solving groundwater flow equations with wells was proposed. GW-PINN takes the physics inform neural network (PINN) as the backbone and uses either the hard or soft constraint in the loss function for training. A locally refined sampling strategy (LRS) is adopted to generate the consistent spatial sampling points for problems with strong hydraulic head change, and then combined with an appropriate temporal sampling scheme to obtain the final spatial-temporal sampling points. A snowball-style two-stage training strategy by dividing the temporal domain into two subdomains is designed to decrease the sampling points. Five cases were designed to test the training performance of GW-PINN under different sampling strategies and two constraints. The predicted results of GW-PINN were compared with MODFLOW and the analytical solution. The results demonstrate that GW-PINN possesses strong ability in capturing the hydraulic head change for both confined and un-confined aquifers. The hard constraint owns more robust learning ability than the soft constraint. The LRS strategy can generate more accurate results with much fewer sampling points than traditional sampling strategies, and the snowball-style two-stage training strategy is significantly efficient for problems with the drastic change of hydraulic head. Additionally, the application of GW-PINN as a surrogate model for parameterized groundwater flow equations is illustrated. This study provides an option tool for efficient groundwater flow simulation, especially for those with local refinements are needed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

SICOPOLIS-AD: Quick-Start Manual (Revision 0.11)

SICOPOLIS-AD is a version of the ice sheet model SICOPOLIS used to produce adjoint sensitivities of chosen control variables. It can be used to assess the sensitivity of some quantity of interest to perturbations in variables that may affect that quantity of interest. For example, it can be used to comprehensively and quantitatively assess exactly how the volume of the Greenland Ice Sheet is sensitive to changes in surface temperature at each point on the ice sheet. This document provides basic startup and troubleshooting methods, as well as some best practices for making changes in the code for the purposes of adjoint production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Exploring the non-Gaussianity of the cosmic infrared background and its weak gravitational lensing

ABSTRACT Gravitational lensing deflects the paths of photons, altering the statistics of cosmic backgrounds and distorting their information content. We take the cosmic infrared background (CIB), which provides plentiful information about galaxy formation and evolution, as an example to probe the effect of lensing on non-Gaussian statistics. Using the Websky simulations, we first quantify the non-Gaussianity of the CIB, revealing additional detail on top of its well-measured power spectrum. To achieve this, we use needlet-like multipole-band filters to calculate the variance and higher-point correlations. Using our simulations, we show the two-, three- and four-point spectra, and compare our calculated power spectra and bispectra to Planck values. We then lens the CIB, shell-by-shell with corresponding convergence maps, to capture the broad redshift extent of both the CIB and its lensing convergence. The lensing of the CIB changes the three- and four-point functions by a few tens of per cent at large scales, unlike with the power spectrum, which changes by less than two per cent. We expand our analyses to encompass the full intensity probability distribution functions (PDFs) involving all n-point correlations as a function of scale. In particular, we use the relative entropy between lensed and unlensed PDFs to create a spectrum of templates that can allow estimation of lensing. The underlying CIB model is missing the important role of star bursting, which we test by adding a stochastic lognormal term to the intensity distributions. The novel aspects of our filtering and lensing pipeline should prove useful for any radiant background, including line intensity maps.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Mesoscopic two-point collective dynamics of glass-forming liquids

The collective density–density and hydrostatic pressure–pressure correlations of glass-forming liquids are spatiotemporally mapped out using molecular dynamics simulations. It is shown that the sharp rise of structural relaxation time below the Arrhenius temperature coincides with the emergence of slow, nonhydrodynamic collective dynamics on mesoscopic scales. The observed long-range, nonhydrodynamic mode is independent of wave numbers and closely coupled to the local structural dynamics. Below the Arrhenius temperature, it dominates the slow collective dynamics on length scales immediately beyond the first structural peak in contrast to the well-known behavior at high temperatures. Furthermore, these results highlight a key connection between the qualitative change in mesoscopic two-point collective dynamics and the dynamic crossover phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Occupancy-Driven Stochastic Decision Framework for Ranking Commercial Building Loads

For effective integration of building operations into the evolving demand response programs of the power grid, real-time decisions concerning the use of building appliances for grid services must excel on multiple criteria, ranging from the added value to occupants' comfort to the quality of the grid services. In this paper, we present a data-driven stochastic decision-support framework to dynamically rank load control alternatives in a commercial building, addressing the needs of multiple decision criteria (e.g. occupant comfort, grid service quality) under uncertainties in occupancy patterns. We adopt a stochastic multi-criteria decision algorithm recently applied to prioritize residential on/off loads, and extend it to i) consider complex load control decisions (e.g. dimming of lights, changing zone temperature set-points) in a commercial building; and ii) systematically integrate zonal occupancy patterns to better identify short-term (and time-varying) opportunities for grid service participation. We evaluate the performance of the proposed framework for curtailment of air-conditioning, lighting, and plug-loads in a multi-zone commercial office building for a range of design choices. With the help of a prototype system that integrates an interactive \textit{Data Analytics and Visualization} frontend we demonstrate a way for the building operators to monitor and change in real-time the available flexibility in energy consumption and to develop trust in the decision recommendations by interpreting the rationale behind the ranking.

Jain, Milan↗
DOE OSTI2020

A Discrete Dendrite Dynamics Model for Epitaxial Columnar Grain Growth in Metal Additive Manufacturing with Application to Inconel

Epitaxial columnar grain growth is a prevalent microstructural feature in the additive manufacturing (AM) of metal components such as Inconel, with cubic unit cell crystal lattice structure (face centered cubic (FCC) or body centered cubic (BCC)). These columnar grains evolve from the partly molten grains in the substrate or the solidified metal. This work proposes an efficient model to simulate the competitive growth of epitaxial columnar dendritic grains. The proposed model tracks the dynamic changes in the dendrites emanating from discrete points along the solid/liquid interface of a quasi-steady melt pool (MP). These dynamic changes include convergence and divergence of growing dendrites. The model is extended to predict the microstructure of large 3D parts and experimentally validated by comparing the simulation results for laser powder bed fusion (L-PBF) and wire-arc additive manufacturing (WAAM) processes. The microstructure and pole figures are predicted for Inconel 718 samples produced by L-PBF and Inconel 740H samples produced by WAAM processes. Finally, the model predictions compare well with the observed microstructure and pole figures results for both the L-PBF and WAAM processes.

20 FOSSIL-FUELED POWER PLANTS↗