Search NASA⌕ Search

SEARCH · Search NASA

Results for “charge tunable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Hole doping in compositionally complex correlated oxide enables tunable exchange biasing

Magnetic interfaces and the phenomena arising from them drive both the design of modern spintronics and fundamental research. Recently, it was revealed that through designing magnetic frustration in configurationally complex entropy stabilized oxides, exchange bias can occur in structurally single crystal films. This eliminates the need for complex heterostructures and nanocomposites in the design and control of magnetic response phenomena. In this work, we demonstrate through hole doping of a high entropy perovskite oxide that tuning of magnetic responses can be achieved. With detailed magnetometry, we show magnetic coupling exhibiting a variety of magnetic responses including exchange bias and antiferromagnetic spin reversal in the entropy stabilized ABO 3 perovskite oxide La 1-x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 family. We find that manipulation of the A-site charge state can be used to balance magnetic phase compositions and coupling responses. This allows for the creation of highly tunable exchange bias responses. In the low Sr doping regime, a spin frustrated region arising at the antiferromagnetic phase boundary is shown to directly couple to the antiferromagnetic moments of the film and emerges as the dominant mechanism, leading to a vertical shift of magnetization loops in response to field biasing. At higher concentrations, direct coupling of antiferromagnetic and ferromagnetic regions is observed. This tunability of magnetic coupling is discussed within the context of these three competing magnetic phases, revealing critical features in designing exchange bias through exploiting spin frustration and disorder in high entropy oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ligand Controls Excited Charge Carrier Dynamics in Metal-Rich CdSe Quantum Dots: Computational Insights

Small metal-rich semiconducting quantum dots (QDs) are promising for solid-state lighting and single-photon emission due to their highly tunable yet narrow emission line widths. Nonetheless, the anionic ligands commonly employed to passivate these QDs exert a substantial influence on the optoelectronic characteristics, primarily owing to strong electron–phonon interactions. In this work, we combine time-domain density functional theory and nonadiabatic molecular dynamics to investigate the excited charge carrier dynamics of Cd 28 Se 17 X 22 QDs (X = HCOO – , OH – , Cl – , and SH – ) at ambient conditions. These chemically distinct but regularly used molecular groups influence the dynamic surface-ligand interfacial interactions in Cd-rich QDs, drastically modifying their vibrational characteristics. The strong electron–phonon coupling leads to substantial transient variations at the band edge states. The strength of these interactions closely depends on the physicochemical characteristics of passivating ligands. Consequently, the ligands largely control the nonradiative recombination rates and emission characteristics in these QDs. Our simulations indicate that Cd 28 Se 17 (OH) 22 has the fastest nonradiative recombination rate due to the strongest electron–phonon interactions. Conversely, QDs passivated with thiolate or chloride exhibit considerably longer carrier lifetimes and suppressed nonradiative processes. The ligand-controlled electron–phonon interactions further give rise to the broadest and narrowest intrinsic optical line widths for OH and Cl-passivated single QDs, respectively. Finally, obtained computational insights lay the groundwork for designing appropriate passivating ligands on metal-rich QDs, making them suitable for a wide range of applications, from blue LEDs to quantum emitters.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Two-dimensional assembly of gold nanoparticles grafted with charged-end-group polymers

We introduced charged terminal groups to polymers that graft nanoparticles enable Coulombic control over their assembly by tuning the pH and salinity of their aqueous suspensions. Gold nanoparticles (AuNPs) are grafted with poly (ethylene glycol) (PEG) terminated with CH 3 (charge-neutral), COOH (negatively charged) or NH 2 groups (positively charged), and characterized with dynamic light scattering, ζ-potential, and thermal gravimetric analysis. Liquid surface X-ray reflectivity (XR) and grazing incidence small-angle X-ray scattering (GISAXS) are used to determine the density profile and in-plane structure of the AuNPs assembly at the aqueous surface. Assembly of PEG-AuNPs at the liquid/vapor interface is tunable by adjusting pH or salinity for COOH but less for NH 2 terminals. The distinct assembly behaviors are attributed to the overall charge of PEG-AuNPs as well as PEG conformation. COOH-PEG corona is more compact than those of the other terminal groups, leading to a crystalline structure with a smaller superlattice. The net charge per particle depends not only on the PEG terminal groups but also on the cation sequestration of PEG and the intrinsic negative charge of the AuNP surface. The closeness to overall charge neutrality, and hydrogen bonding in play, brought by NH 2 -PEG, drive NH 2 -PEG-AuNPs to assembly and crystallinity without additives to the suspensions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Tunable Electronic Energy Level Alignment and Exciton Diversity in Organic–Inorganic van der Waals Heterostructures

van der Waals stacking of two-dimensional (2D) materials offers a powerful platform for engineering material interfaces with tailored electronic and optical properties. While most van der Waals multilayers have featured inorganic monolayers, incorporating molecular monolayers introduces additional degrees of tunability and functionality. Here, in this study, we investigate hybrid bilayers composed of atomically thin perylene-based molecular crystals interfaced with monolayer transition metal dichalcogenides (TMDs), specifically MoS 2 and WS 2 . Using the ab initio many-body perturbation theory within the GW approximation and the Bethe-Salpeter equation approach, we predict emergent properties beyond those of the isolated constituent systems. Notably, we find substantial renormalization of monolayer molecular crystal band gap due to TMD-induced polarization. Furthermore, by varying the TMD monolayer, we demonstrate tuning of the energy level alignment of the bilayer and subsequent control over a diversity of lowest-energy excitons, which include strongly bound hybrid excitons and long-lived charge-transfer excitons. These findings establish organic-inorganic van der Waals heterostructures as a promising class of materials for tunable optoelectronic devices and quantum excitonic phenomena, expanding the design space for low-dimensional systems.

GW-BSE calculations↗
DOE OSTI2025

Revealing the Influence of Binding Motifs on Electron Transfer and Recombination Kinetics for CdSe Quantum Dots Functionalized with a Modified Viologen

Anchoring of molecules to the surfaces of semiconductor nanocrystals (NCs) presents an opportunity to leverage the precise synthetic tunability of molecular function and the remarkable light harvesting properties of NCs to drive photochemical reactions. However, charge transfer between the two species depends not only on the energy level alignments but also on the details of their binding interactions, which are difficult to probe. Here, in this work, we characterize the binding between CdSe quantum dots (QDs) and a new phosphonated derivative of the electron acceptor methyl viologen, designed to attach to the QD surface via the phosphonate group. We use isothermal titration calorimetry to probe the thermodynamics of the QD–molecule interaction and use the parameters determined therein to analyze transient absorption spectroscopy measurements of forward and back electron transfer from QDs to the viologen. We find that the ligand-like phosphonate binding leads to an electron-transfer rate constant that is 3 orders of magnitude smaller than that for the face-on binding of the bipyridine ring of methyl viologen. Back electron transfer is also significantly slower in the derivative. Interestingly, a minor fraction of the phosphonated derivative also binds in the face-on configuration, with similar forward and back electron transfer kinetics as methyl viologen. Numerical simulations show that the ligand-like binding will lead to significantly improved quantum yields of photocatalysis over a wide range of reaction rates. By independently characterizing binding thermodynamics and charge transfer kinetics, this work reveals how the complexities underlying electron transfer at the NC–molecule interface determine photocatalytic outcomes. This work also represents a step toward controlling forward and back electron transfer kinetics via rational molecular design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Alloying effect of rare-earth tritellurides on the charge density wave and magnetic properties

Among many van der Waals materials rare-earth tritellurides (RTe3) allow studying several phenomena like magnetic, superconducting, and charge density wave (CDW). These studies show the effect of cationic alloying of antiferromagnetic RTe3 for fully tunable near room-temperature CDW properties. DyxGd1−xTe3 and DyxTb1−xTe3 alloys were synthesized through a chemical vapor transport technique, and the rare-earth element composition was controlled by changing the ratio of rare-earth metal reagents. The results show that the lattice parameters can be continuously tuned with the composition of the rare-earth cations leading to the variation of the internal chemical pressure. Temperature-dependent Raman spectroscopy and electric transport measurement show that the CDW transition temperature (TCDW) of RTe3 alloys varies with lattice parameters/chemical pressure spanning across 300–380 K. Additional magnetism studies offer the first insights into the magnetic ordering in RTe3 alloys. The emergence of multiple magnetic transitions implies complex magnetic interactions that arise from interactions between different rare-earth elements. Overall findings introduce ways to control the CDW behavior and provide valuable insights into the magnetic ordering in RTe3 alloys, contributing to further investigation and a better understanding of their properties.

Physics↗
DOE OSTI2020

Probing Charge Ordering in Fractional Mixed-Valence Charge Density Wave Systems with Oriented HERFD-XANES Spectroscopy

In this paper, we present oriented Pt L III edge high energy resolution fluorescence detected X-ray absorption near edge structure (HERFD-XANES) measurements on a series of structurally tunable quasi-one-dimensional mixed-valence platinum-halide linear chain materials, [Pt(en) 2 ][Pt(en) 2 X 2 ](ClO 4 ) 4 with X = Cl, Br, I, together with ab initio modeling of the spectral components and electronic structure. The materials exhibit a commensurate charge density wave (CDW) with an amplitude controlled by the bridging halide ion, giving rise to fractional mixed valence states. Ab initio FEFF9 modeling of the spectra and the associated angular momentum projected density of states (lDOS) are used to interpret the results, revealing systematic changes in the platinum orbital occupancy through the series of materials that reflect the fractional mixed valence states of the CDW. A significant contribution to a post-edge feature in the oriented spectra is identified as resulting from quantum interference between the final states of the X-ray absorption transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Intramolecular redox-site interplay effect on organic electrode for fast-charging and wide-temperature-range sodium-ion batteries

Organic electrode materials (OEMs) hold great promise for sodium-ion batteries (SIBs) due to their exceptional structural tunability and sustainability. However, the development of OEMs with fast redox kinetics and robust structural integrity remains challenging, especially over a wide temperature range. Herein, we propose an effective strategy to address both sluggish redox kinetics and insufficient structural stability in OEMs by constructing an intramolecular redox-site interplay effect. This effect is demonstrated by two hexaazatrinaphthylene-carboxylate isomers, namely HATN-m-COONa and HATN-o-COONa. Systematic experimental and computational results jointly reveal the intramolecular redox-site interplay effect in HATN-o-COONa decreases the rigid π-π stacking interactions and minimizes the skeleton structural distortion, offering faster redox kinetics and enhanced structural integrity in HATN-o-COONa compared to HATN-m-COONa (without intramolecular redox-site interplay effect). Consequently, HATN-o-COONa exhibits superior rate performance (258 mA h g−1 at 10 A g−1) and enhanced cycle stability (93% after 1000 cycles at 5 A g−1) compared to HATN-m-COONa. More importantly, HATN-o-COONa demonstrates exceptional wide-temperature adaptability, ranging from -40 °C (315 mA h g−1 at 0.1 A g−1) to 60 oC (343 mAh g-1 at 5 A g-1). This work establishes a promising design rationale for developing fast-charging and wide-temperature adaptable OEMs for energy storage systems.

Gao, Yawei [ORNL] (ORCID:0000000225672853)↗
DOE OSTI2026

Modulating charge transport via 2 MeV He + irradiation in VO 2

Vanadium dioxide (VO 2 ) is of interest for adaptive electronic applications such as neuromorphic neuristor devices and variable emissivity or tunable thermal control materials, thanks to its key property—a metal–insulator transition (MIT) at 68 °C that is accompanied by a dramatic change in electrical and optical properties. To improve performance in these roles, it is critical to develop approaches to engineer transport properties and the MIT behavior. While many documented techniques exist to modulate the MIT and film resistivities via lattice strain and chemical doping, less is known about the effects of ion irradiation on the intrinsic properties of VO 2 , despite the ability to control the spatial distribution of irradiation beams and the prevalence of high energy ion implantation in the semiconductor industry. The impact of irradiation of different acceleration energies on the responses of VO 2 is of specific interest, as charged particle energy generally impacts both the resulting defect profile and corresponding transport behavior. Here, we demonstrate that 2 MeV He ions at equivalent calculated displacements per atom, in two different types of films, can create remarkable changes to the nature of charge transport in VO 2 , especially in the low-temperature insulating phase. Simulation of resulting changes in electrical conductivity reveals that He ion irradiation offers a strategy to increase both oscillation frequency and the signal transmission. These results provide insights into the intentional design of defect populations to modulate transport for neuromorphic VO 2 devices.

Gurrola, Rebeca M. [Texas A & M Univ., College Sta↗
DOE OSTI2026

Advances in Colloidal InP-Based Quantum Dots for Photocatalytic Hydrogen Evolution

Photocatalytic materials for hydrogen generation are typically categorized into UV-absorbing metal oxides and visible-range semiconductors such as chalcogenides or perovskites, which often incorporate toxic elements. To address environmental concerns of the latter group, indium phosphide (InP)-based quantum dots (QDs) have recently emerged as a less toxic alternative. These nanocrystals (NCs) benefit from a broadband and tunable absorption spectrum, which is well matched for solar photochemistry, and offer suitable electronic characteristics to drive photoinduced charge separation. This perspective provides a comprehensive summary of the recent advancements in developing InP-based NCs with a focus on photocatalytic hydrogen production. We discuss synthetic strategies that enhance the catalytic activity of these materials and highlight key challenges that must be addressed to enhance their performance. Finally, we explore future research directions aimed at improving photocatalytic efficiency and integrating InP-based QDs into practical solar-to-fuel conversion systems.

Hydrogen↗
DOE OSTI2022

Photo-Induced Charge Transfer of Fullerene and Non-Fullerene Conjugated Polymer Blends via Ab Initio Excited-State Dynamics

Organic conjugated polymers (CPs) are promising candidates for organic photovoltaic (OPV) devices due to their unique tunable mechanical and optoelectronic performance. Over the last decade, optoelectronic properties of narrow band gap CPs as a blend with acceptor units are largely optimized, which leads to noticeable progress in OPV technology. However, their power conversion efficiency is still lower than their organic counterparts (i.e., silicon), limiting their practical usage. In this study, we employ ab initio molecular dynamics to explore photo-induced charge transfer (CT) of the diketopyrrolopyrrole-based polymer as a blend with non-fullerene (i.e., ITIC) and fullerene (i.e., PCBM) acceptor units. The results of charge carrier dynamics induced by selected photoexcitation show that hole density redistribution in space is much faster than electron relaxation. We track the relaxation rates of charge carriers over time, where the derivative of the difference between the rate of electron and hole implies the current density at zero voltage. Furthermore, this can be utilized to characterize the CT performance of CPs blended with different acceptor units. Relaxation rate results indicate that CP blend with ITIC promises a better PV performance, illustrating that the current computational approach opens the door to determine bulk heterojunctions’ electronic performance for OPV devices and narrowing down the list of potential donor–acceptor candidates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Crystal Prediction and Design of Tunable Light Emission in BTB–Based Metal–Organic Frameworks

Metal-organic frameworks (MOFs) have recently been shown to exhibit unique mechanisms of luminescence based on charge transfer between structural units in the framework. These MOFs have the potential to be structural tuned for targeted emission with little or no metal participation. Here a computationally led, material design and synthesis methodology is presented that elucidates the mechanisms of light emission in interpenetrated structures comprised of metal centers (M = In, Ga, InGa, InEu) and BTB (1,3,5-Tris(4-carboxyphenyl)benzene) linkers, forming unique luminescent M-BTB MOF frameworks. Gas phase and periodic electronic structure calculations indicate that the intensity of the emission and the wavelength are overwhelmingly controlled by a combination of the number of interacting stacked linkers and their interatomic spacings, respectively. In the MOF, the ionic radii of the metal centers primarily control the expansion or shrinkage of the linker stacking distances. Experimentally, multiple M-BTB-based MOFs are synthesized and their photoluminescence was tested. Experiments validated the modeling by confirming that shifts in the crystal structure result in variations in light emission. Through this material design method, the mechanisms of tuning luminescence properties in interpenetrated M-BTB MOFs have been identified and applied to the design of MOFs with specific wavelength emission based on their structure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Highly skewed current–phase relation in superconductor–topological insulator–superconductor Josephson junctions

Three-dimensional topological insulators (TIs) in proximity with superconductors are expected to exhibit exotic phenomena, such as topological superconductivity (TSC) and Majorana-bound states (MBS), which may have applications in topological quantum computation. In superconductor–TI–superconductor Josephson junctions, the supercurrent versus the phase difference between the superconductors, referred to as the current–phase relation (CPR), reveals important information including the nature of the superconducting transport. Here, we study the induced superconductivity in gate-tunable Josephson junctions (JJs) made from topological insulator BiSbTeSe 2 with superconducting Nb electrodes. We observe highly skewed (non-sinusoidal) CPR in these junctions. The critical current, or the magnitude of the CPR, increases with decreasing temperature down to the lowest accessible temperature ( T ~ 20 mK), revealing the existence of low-energy modes in our junctions. The gate dependence shows that close to the Dirac point the CPR becomes less skewed, indicating the transport is more diffusive, most likely due to the presence of electron/hole puddles and charge inhomogeneity. Our experiments provide strong evidence that superconductivity is induced in the highly ballistic topological surface states (TSS) in our gate-tunable TI-based JJs. Furthermore, the measured CPR is in good agreement with the prediction of a model which calculates the phase-dependent eigenstate energies in our system, considering the finite width of the electrodes, as well as the TSS wave functions extending over the entire circumference of the TI.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct measurement of ferroelectric polarization in a tunable semimetal

Abstract Ferroelectricity, the electrostatic counterpart to ferromagnetism, has long been thought to be incompatible with metallicity due to screening of electric dipoles and external electric fields by itinerant charges. Recent measurements, however, demonstrated signatures of ferroelectric switching in the electrical conductance of bilayers and trilayers of WTe 2 , a semimetallic transition metal dichalcogenide with broken inversion symmetry. An especially promising aspect of this system is that the density of electrons and holes can be continuously tuned by an external gate voltage. This degree of freedom enables measurement of the spontaneous polarization as free carriers are added to the system. Here we employ capacitive sensing in dual-gated mesoscopic devices of bilayer WTe 2 to directly measure the spontaneous polarization in the metallic state and quantify the effect of free carriers on the polarization in the conduction and valence bands, separately. We compare our results to a low-energy model for the electronic bands and identify the layer-polarized states that contribute to transport and polarization simultaneously. Bilayer WTe 2 is thus shown to be a fully tunable ferroelectric metal and an ideal platform for exploring polar ordering, ferroelectric transitions, and applications in the presence of free carriers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Proton Tunable Analog Transistor for Low Power Computing

This project was broadly motivated by the need for new hardware that can process information such as images and sounds right at the point of where the information is sensed (e.g. edge computing). The project was further motivated by recent discoveries by group demonstrating that while certain organic polymer blends can be used to fabricate elements of such hardware, the need to mix ionic and electronic conducting phases imposed limits on performance, dimensional scalability and the degree of fundamental understanding of how such devices operated. As an alternative to blended polymers containing distinct ionic and electronic conducting phases, in this LDRD project we have discovered that a family of mixed valence coordination compounds called Prussian blue analogue (PBAs), with an open framework structure and ability to conduct both ionic and electronic charge, can be used for inkjet-printed flexible artificial synapses that reversibly switch conductance by more than four orders of magnitude based on electrochemically tunable oxidation state. Retention of programmed states is improved by nearly two orders of magnitude compared to the extensively studied organic polymers, thus enabling in-memory compute and avoiding energy costly off-chip access during training. We demonstrate dopamine detection using PBA synapses and biocompatibility with living neurons, evoking prospective application for brain - computer interfacing. By application of electron transfer theory to in-situ spectroscopic probing of intervalence charge transfer, we elucidate a switching mechanism whereby the degree of mixed valency between N-coordinated Ru sites controls the carrier concentration and mobility, as supported by density functional theory (DFT) .

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Observation of dimension-crossover of a tunable 1D Dirac fermion in topological semimetal NbSi x Te 2

Condensed matter systems in low dimensions exhibit emergent physics that does not exist in three dimensions. When electrons are confined to one dimension (1D), some significant electronic states appear, such as charge density wave, spin-charge separations, and Su-Schrieffer-Heeger (SSH) topological state. However, a clear understanding of how the 1D electronic properties connects with topology is currently lacking. Here we systematically investigated the characteristic 1D Dirac fermion electronic structure originated from the metallic NbTe 2 chains on the surface of the composition-tunable layered compound NbSi x Te 2 (x = 0.40 and 0.43) using angle-resolved photoemission spectroscopy. We found the Dirac fermion forms a Dirac nodal line structure protected by the combined $\widetilde {M_y}$ and time-reversal symmetry T and proves the NbSi x Te2 system as a topological semimetal, in consistent with the ab-initio calculations. As x decreases, the interaction between adjacent NbTe 2 chains increases and Dirac fermion goes through a dimension-crossover from 1D to 2D, as evidenced by the variation of its Fermi surface and Fermi velocity across the Brillouin zone in consistence with a Dirac SSH model. Our findings demonstrate a tunable 1D Dirac electron system, which offers a versatile platform for the exploration of intriguing 1D physics and device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Growth-induced Donnan exclusion influences swelling kinetics in highly charged dynamic polymerization hydrogels

Polymeric gels crosslinked by DNA sequences can exploit DNA strand-displacement reactions to promote swelling through dynamic polymerization. The degree of swelling and the rate of swelling must be directly tunable to achieve the promise of programmable soft matter. Though the kinetics of the strand-displacement reaction provide insertion rates up to 10 4 /Molar/second as measured in bulk solution, DNA hydrogel swelling can take upwards of 30 h to complete. Computational modeling of the reaction-induced swelling of these gels with our recently-developed reactive electrochemomechanical theory (Zimmerman et al., 2024) suggests that their extraordinarily slow swelling is partly due to a scaling mismatch between the addition of charge and the addition of fluid volume, leading to a large transient increase in the fixed charge density. The significant increase in the gel’s fixed charge density, due to the binding of negatively charged DNA, sharply restricts the concentration of mobile hairpins through the phenomenon of Donnan charge exclusion, an effect commonly exploited in nanofiltration applications using polymeric membranes. The scaling problem is overcome when the mean additional swelling provided to the hydrogel by addition of a crosslink is above a critical value, thus the swelling outpaces the charge accumulation, leading the fixed charge density to drop and significantly accelerating the swelling process. This study shows that Donnan exclusion can explain the kinetics of DNA hydrogel swelling, and studies ways to modulate the reaction speed by either modifying the salt concentration or increasing or decreasing the number of base pairs in each DNA sequence.

42 ENGINEERING↗