Search NASA⌕ Search

SEARCH · Search NASA

Results for “commensurate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Ground test article for deployable space structure systems

The ground test article fabrication and assembly plan was completed by Santek Engineering, Inc. The plan was reviewed and accepted by Rockwell during an on-site visit to the Santek facility. Raw material and hardware orders were placed by Santek in July. Approximately 98% of the raw materials and 10% of the hardware deliveries have been completed. Several material and hardware substitutions were requested by Santek due to no-bid responses from suppliers or excessive costs for limited quantity items. These substitutions were evaluated and approved by Rockwell Engineering and Material and Process and are being incorporated into the drawing package. Santek started fabrication of detail parts in mid-August. Their current resource utilization is at approximately 50% of the planned eventual commitment and is increasing at a rate commensurate with the fabrication and assembly plan. At this writing, Santek's estimate of completion is 03%. During verification testing of the diagonal member joint, in a program funded by Rockwell discretionary funds, the axial load to unlock the joint was found to increase significantly after a few cycles of operation. This was attributed to galling, poor lubrication, and locking pin geometry. A change of materials, lubricant, and modification of the pin geometry reduced the unlocking load and provided repeatability after 50 cycles of operation. This new design is being implemented into the ground test article.

Malloy, G. D.↗

Chaotic behavior and the origin of the 3/1 Kirkwood gap

The sudden eccentricity increases discovered by Wisdom (1982) are reproduced in numerical integrations of the planar ecliptic restricted three-body problem, verifying that this phenomenon is real. Mapping derivations are qualitatively reviewed and the maximum Liapunov characteristic exponent and its importance for determining the character of a trajectory are explained. The results of a number of calculations of this exponent using the differential equations for the unaveraged three-body problem are shown and compared to equivalent calculations using a mapping. In all cases the two approaches agree whether the orbits are chaotic or quasiperiodic. The mappings are used to trace out the chaotic zone near the 3/1 commensurability, both in the planar-ecliptic problem and in the three-dimensional elliptic problem. The outer boundary of the chaotic zone coincides with the boundary of the 3/1 Kirkwood gap in the actual distribution of asteroids within the errors of the asteroid orbital elements.

Wisdom, J.↗

Landsat image registration for agricultural applications

An image registration system has been developed at the NASA Johnson Space Center (JSC) to spatially align multi-temporal Landsat acquisitions for use in agriculture and forestry research. Working in conjunction with the Master Data Processor (MDP) at the Goddard Space Flight Center, it functionally replaces the long-standing LACIE Registration Processor as JSC's data supplier. The system represents an expansion of the techniques developed for the MDP and LACIE Registration Processor, and it utilizes the experience gained in an IBM/JSC effort evaluating the performance of the latter. These techniques are discussed in detail. Several tests were developed to evaluate the registration performance of the system. The results indicate that 1/15-pixel accuracy (about 4m for Landsat MSS) is achievable in ideal circumstances, sub-pixel accuracy (often to 0.2 pixel or better) was attained on a representative set of U.S. acquisitions, and a success rate commensurate with the LACIE Registration Processor was realized. The system has been employed in a production mode on U.S. and foreign data, and a performance similar to the earlier tests has been noted.

Wolfe, R. H., Jr.↗

Proposed structures for poorly characterized phases in C2M carbonaceous chondrite meteorites

A recent investigation of C2M carbonaceous chondrite meteorite matrices using electron microscopy and High-Resolution Transmission Electron Microscopy (HRTEM) has provided data on the structure and chemistry of Poorly Characterized Phases (PCP). It is suggested that a dominant matrix variety (10 A PCP) has a structure equivalent to iron-rich tochinilite (6Fe0.9S5/Fe, Mg//OHO2/), which consists of coherently intrastratified mackinawite and brucite sheets. In addition, it is proposed that 17 A PCP is a commensurate intergrowth of serpentine and tochinilite layers. Various forms of PCP observed in carbonaceous chondrites appear to be intergrowths of tochinilite, serpentine, and tochinilite-serpentine minerals.

Mackinnon, I. D. R.↗

A collection of Galilean satellite eclipses 1652-1982

Data from visual observations of the eclipses of the Jovian Galilean satellites recorded in two 17th and 18th century manuscripts are analyzed. It is shown that a 'lost' group of more than 6800 eclipse observations known as the Delambre collection is actually contained in two smaller manuscripts, the Pingre book and the Delisle manuscript. The data in the collections are expected to be useful in determining the ephemerides, masses and libration parameters of the Jovian satellites, for the study of questions related to Delta T (Ephemeris Time-Universal Time) as it was recorded in the 17th century, and for the study of the Laplace commensurability.

Lieske, J. H.↗

Ring torque on Janus and the melting of Enceladus

The absence of craters noted on Voyager 2 images of Encedalus indicates geologically recent resurfacing, probably due to internal melting; heating mechanism calculations, however, yield heating rates too small to cause melting. If Janus, whose orbital mean motion is currently decreasing as Janus' orbit evolves outward due to resonant torques from Saturn's rings, were ever to become locked into a stable 2:1 orbital commensurability with Encedalus, the resulting angular momentum transfer could have sufficiently enhanced the eccentricity of Encedalus' orbit for the ensuing tidal heating to have melted Encedalus' interior. However, the predicted rapid time scale for ring evolution due to resonant torques from Saturn's inner moons remains a major problem.

Lissauer, J. J.↗

European retrievable carrier (Eureca) and evolutionary space carrier for microgravity, Earth observation and technology demonstration

The Spacelab relatively short stay-time in orbit has led to consideration of the European Retrievable Carrier (EURECA) concept as a reusable carrier. The EURECA concept is a free-flying carrier of experiments which is launched and recovered by the space shuttle. It is commensurate with the size of payloads that can be economically developed in Europe and combines the advantages of Spacelab (high mass and power capability, recovery) with those of a free flyer (extended operating time in a non-polluted environment). The launch of the first EURECA mission is scheduled for October 1987. The Eureca spacecraft will be deployed from the Shuttle cargo bay in orbit, will operate in a free-flying mode for about six months, and will then be retrieved, together with its payloads, returned to Earth by the Space Shuttle and prepared for the next mission. The first mission of EURECA is dedicated to research in the fields of life sciences and material sciences. The experimental hardware of the first mission consist of a variety of processin chambers for crystal growth and equipment for biological investigations viz plant growth and protein crystallization, and there is the possibility to perform experiments in the field of exobiology.

Mory, R.↗

NASA's SESAC report on research and analysis in space and Earth sciences

The Research and Analysis Program is the core of the OSSA program in the space and Earth sciences because it provides the means of identifying the most appropriate missions and ensures that scientific results are fully realized. Consequently, this program must be given a priority in funding that is commensurate with that of flight programs. The goals of the R&A program and its role in meeting present day OSSA objectives; management of the R&A program by NASA Headquarters Discipline Chiefs and Programs Managers; and funding and distribution trends are assessed. Recommendations are advanced for halting the declining support of this program.

Source record↗

The bulk-Moon MgO/FeO ratio: A highlands perspective

Compositional data for nonmare (highlands) samples suggest that the Moon's mg ratio (MgO/FeO) is higher than general estimates. Geochemically representative highlands soils have mg ratios of 0.66 (Apollo 16), 0.69 (Luna 20) and 0.73 (ALHA81005). These soils are mixtures of unrelated pristine nonmare rocks, of which there are at least three groups: Mg-rich rocks, ferroan anorthosites, and KREEP. Other than Mg-rich rocks, virtually all pristine rocks have mg 0.65. Thus, assuming the mixing process that sampled Mg-rich materials was random, the average mg of Mg-rich parent magmas was probably at least 0.70. More direct evidence can be derived from the Mg-rich rocks themselves. Nine of them have bulk-rock mg 0.87. Two (15445 A and 67435 PST) contain Fo(92) olivine. Production of melts that crystallized Fo(92) olivine implies that the mg ratios of source regions in lunar mantle were commensurably high. A quantification of this constraint is developed assuming that the parent melts formed by equilibrium (batch) partial melting. Implications of the model are discussed.

Warren, P. H.↗

Stability of the Galilean Satellites in Deep Orbital Resonance

The Galilean satellites are locked in the Laplace resonance, which is responsible for forcing their significant orbital eccentricites. The eccentricites in turn result in tidal energy dissipation within the satellites that is responsible for the great thermal activity on Io, including both volcanism observed by Voyager and heat flux measured from Earth. The resonance results from the nearly 2:1 commensurability of orbital periods (or equivalently of mean motions) taken by pairs. These geometrical relations enhance the mutual gravitational effects. Yoder pointed out that tides raised on Io tend to drive the system out of resonance (toward greater nu and correspondingly smaller eccentricities) while tides raised on Jupiter tend to drive the system towards deeper resonance (smaller nu and larger forced eccentricities). The possible behavior of the system in deep resonance is investigated.

Richard Greenburg↗

Capture of liquid hydrogen boiloff with metal hydride absorbers

A procedure which uses metal hydrides to capture some of this low pressure (,1 psig) hydrogen for subsequent reliquefaction is described. Of the five normally occurring sources of boil-off vapor the stream associated with the off-loading of liquid tankers during dewar refill was identified as the most cost effective and readily recoverable. The design, fabrication and testing of a proof-of-concept capture device, operating at a rate that is commensurate with the evolution of vapor by the target stream, is described. Liberation of the captured hydrogen gas at pressure .15 psig at normal temperatures (typical liquefier compressor suction pressure) are also demonstrated. A payback time of less than three years is projected.

Rosso, M. J.↗

Late-stage planetesimals: How big?

Numerical simulation of the early stages of planet growth show that a few bodies nearly 1000 km in diameter may have formed within approx. 100,000 yr after solid material grew into km scale planetesimals by gravitational instability. Even after such large bodies formed, the bulk of the mass of the future terrestrial planet zone resided in small bodies. Subsequent evolution is difficult to model because it requires simultaneous consideration of continuum (multitudinous small bodies) and discrete (a few large bodies) evolution. Some relevant issues include definition of accretional feeding zones, evaluation of the range of gravitational influence, viscous transport and diffusion, orbital commensurabilities, role of gas, etc. The first large bodies may have been (1) the embryos of the final planets, which grew by accreting tiny planetesimals, or (2) merely the first of many 1000+ km bodies, which grew independently and later collided to form the planets. Models of late stage accretion that assume all bodies to be initially nearly Moon sized provide insight into relevant collisional and dynamical processes. The chief point in this research is that the correct size distribution during the later stages of planet growth remains unknown.

Greenberg, R.↗

On the extended chromosphere of Alpha Orionis

A detailed examination of the extended chromosphere of Alpha Orionis was performed in an attempt to characterize the matter-emitting processes of red giants and supergiants. The problem was approached using an Alfven wave driven stellar wind model to compute the density, temperature, and velocity structure of the wind. It is shown that the mechanical energy fluxes necessary to maintain the observed chromospheric temperatures are commensurate with the momentum deposition necessary to extend the chromosphere. The chromospheric model constructed is, however, inconsistent with the kinematics of the observed symmetric profiles, which could correspond to a fountain-type model that described infalling, rather than escaping, ejected material such as He.

Hartmann, L.↗

Control algorithms and computer simulation of a stand-alone photovoltaic village power system

At Stand-Alone Photovoltaic (SAPV) power systems increase in size and load diversity, the design and simulation of control subsystems takes on added importance. These SAPV systems represent 'mini utilities' with commensurate controls requirements, albeit with the added complexity of the energy source (sunlight received) being an uncontrollable variable. This paper briefly describes a stand-alone photovoltaic power/load system computerized simulation model. The model was tested against operational data from the Schuchuli stand-alone village photovoltaic system and has achieved acceptable levels of simulation accuracy. The model can be used to simulate system designs although with probable battery modification.

Groumpos, P. P.↗

Observation of an absorption feature in a gamma ray burst spectrum

A gamma ray burst was detected on March 25, 1978 by the High Energy X-ray and Low Energy Gamma Ray Experiment on HEAO-1. The burst spectrum shows an absorption feature at 55 + or - 5 keV with an equivalent width of 13 + or - 3 keV, values commensurate with those of similar features observed by the KONUS experiment. The burst spectrum also is characterized by a hard component extending from about 0.25-6 MeV. This component can be interpreted in terms of a fireball model for gamma ray bursts, which places the distance to the source at 1 kpc. The integrated fluence of the burst between 0.025 and 6 MeV is 1.5 x 10 to the -5th ergs/sq cm. The burst source has been localized to within a degree of RA = 237.5 deg and Dec = 76.2 deg.

Hueter, G. J.↗

Design and technology considerations for the far ultraviolet spectroscopic explorer (FUSE) telescope

An initial assessment of telescope designs satisfying the basic requirements derived for the FUSE mission is presented. A review of recent optical coating technology indicates that normal incidence telescope designs are viable only for wavelengths greater than about 600 A. It is noted that glancing incidence telescope designs, such as the Wolter Type II or thg Wolter-Schwarzschild, are the only designs with acceptable throughputs for the entire FUSE spectral range. Initial design trade studies have established the fundamental framework for the selection of an optimum Type II design satisfying the FUSE science and engineering requirements. It is also found that current optical fabrication technology, e.g., computer controlled polishing, can accommodate meter class glancing incidence components with figure errors commensurate with 1-2 arcsec imaging.

Davila, P. S. M.↗

Orbital resonances in the solar nebula - Implications for planetary accretion

The influence of gas drag and gravitational perturbations by a planetary embryo on the orbit of a planetesimal in the solar nebula was examined. Non-Keplerian rotation of the gas causes secular decay of the orbit. If the planetesimal's orbit is exterior to the perturber's, resonant perturbations oppose this drag and can cause it to be trapped in a stable orbit at a commensurability of order j/(j + 1), where j is an integer. Numerical and analytical demonstrations show that resonant trapping occurs for wide ranges of perturbing mass, planetesimal size, and j. Induced eccentricities are large, causing overlap of orbits for bodies in different resonances with j greater than 2. Collisions between planetesimals in different resonances, or between resonant and nonresonant bodies, result in their disruption. Fragments smaller than a critical size can pass through resonances under the influence of drag and be accreted by the embryo. This effect speeds accretion and tends to prevent dynamical isolation of planetary embryos, making gas-rich scenarios for planetary formation more plausible.

Weidenschilling, S. J.↗

The importance of improved facular observations in understanding solar constant variations

A new study of solar irradiance modeling has been undertaken to improve the previous modeling efforts and perhaps to resolve the energy-balance question. In the present study, the daily sunspot and facular areas (using plages as a proxy measure of faculae) have been utilized, as well as a plage intensity index to examine brightness variations. It is noted that the reported plage areas changed by a factor of 2 near the end of 1979. Although this can be partially modeled because a commensurate change in plage brightness occurs, it leads to the conclusion that facular areas and brightness uncertainties prevent a definitive answer to the energy-balance question with this technique.

Schatten, K. H.↗