Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide heterostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Properties of ZnSe/Al{sub 2}O{sub 3} Nanostructures Obtained by RF Magnetron Sputtering

Experimental data for the synthesis of ZnSe/Al{sub 2}O{sub 3} nanostructures utilizing a technology widely used in integrated circuit (IC) production are reported. It has been shown that the refractive index and size of the coherent scattering domains grow, whereas the energy bandgap decreases, with an increase in ZnSe width. It has been supposed that samples with a ZnSe width of 9 Å contain a ZnSeO{sub 3} compound and/or ZnSe ⋅ Al{sub 2}O{sub 3} complex compound. Multilayer heterostructures with a ZnSe width more than 9 Å contain cubic ZnSe nanocrystallites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhancing the electron mobility of SrTiO{sub 3} with strain

We demonstrate, using high-mobility SrTiO{sub 3} thin films grown by molecular beam epitaxy, that stress has a pronounced influence on the electron mobility in this prototype complex oxide. Moderate strains result in more than 300% increases in the electron mobilities with values exceeding 120 000 cm{sup 2}/V s and no apparent saturation in the mobility gains. The results point to a range of opportunities to tailor high-mobility oxide heterostructure properties and open up ways to explore oxide physics.

36 MATERIALS SCIENCE↗

Magnetic order and interfacial coupling in oxide thin films and heterostructures probed with soft x-ray dichroism

The combination of novel magnetic properties induced by reduced dimensionality and strong magnetic interactions across interfaces leads to intriguing new properties in magnetic hetero- and nanostructures not observed in the constituent materials in bulk form. It is the careful optimization of the characteristics of the individual layers as well as the magnetic coupling across the interface that allows us to control the magnetic properties and tailor them for devices, e.g., in information storage and processing technology. Soft x-ray magnetic spectroscopies can make unique contributions to improving our understanding of complex magnetic nanostructures since these techniques provide elemental, valence- and site-symmetry specific information with high sensitivity and tunable probing depth. X-ray magnetic circular dichroism (XMCD) is sensitive to (unidirectional) ferromagnetic order, while x-ray magnetic linear dichroism (XMLD) can also detect (uniaxial) antiferromagnetic order. A crystalline electric field with cubic symmetry induces only a weak angular dependence in XMCD spectra [1] but can cause a very pronounced anisotropy in XMLD spectra [2]. Furthermore, non-magnetic sites with a distorted local cubic symmetry can give rise to an x-ray linear dichroism (XLD). In this presentation, we discuss how to distinguish between the individual contributions to soft x-ray dichroism spectra in order to extract the wealth of information about magnetic thin films, interfaces and hetero- and nanostructures contained in the data [3, 4, 5] We determined the magnetic structure of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO)/La{sub 0.7}Sr{sub 0.3}FeO{sub 3} (LSFO) superlattices with 6 unit cell thick sublayers using soft x-ray magnetic dichroism [5]. Circular dichroism was employed to study the characteristics of the ferromagnetic LSMO layer indicating a reduced magnetic ordering temperature of 200 K compared to the bulk value of 360 K. Linear dichroism is used to analyze the antiferromagnetic order in the LSFO layers which persists up to the bulk Neel temperature near 400 K. Our experiments clearly show that when the magnetization of the LSMO layer is aligned with a magnetic field, a torque is created on the Fe moments in the LSFO layer through exchange coupling at the interface realigning the Fe moments as well. Through comparison with theoretical calculations we are able to show that independent of the LSMO magnetization direction in the sample surface plane, the Fe moments are always oriented perpendicular to the Mn moments. This perpendicular alignment is due to the frustrated exchange coupling at the interface and the weak anisotropy in the thin LSFO layer. Revisiting previous XMLD studies of the Co/NiO(001) interface taking the impact of the crystal electric field on the XMLD into account for the first time, we show that NiO(001) exhibits a crystallographic and magnetic domain structure near the surface that is identical to that of the bulk. Upon Co deposition perpendicular coupling of Co and Ni moments is observed [2, 3] that persists even in the presence of uncompensated interface moments. We also measured the asphericity and the energy splitting of the 4f states in EuO thin films [4] - a material with fascinating properties and of technological importance for spintronics applications - using XMLD. Our measurements, which are confirmed by multiplet calculations, show that there is significant 4f anisotropy. This suggests that pinning of the f states by the local environment becomes feasible and can be tuned by external conditions, chemical doping, and strain for use in device applications. Moreover, we will discuss the impact of epitaxial strain on the magnetic properties and XMLD spectra of complex oxide thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exchange anisotropy, engineered coercivity and spintronics in atomically engineered L1 0 heterostructures

We identified and investigated some of the scientific and technically most challenging issues in thin film magnetism focusing on epitaxially grown layers of specific L1 0 ordered, intermetallic, heterostructures with well-controlled crystallography and interface structures. Specifically, we addressed antiferromagnetic/ferromagnetic heterostructures, exhibiting exchange bias (EB) in both in-plane (MnPd/Fe) and perpendicular (IrMn/(Co/Pt) n ) geometries, and ferromagnetic/ferrimagnetic (Co/Y 3 Fe 5 O 12 ) bilayers with strong interlayer exchange coupling and exhibiting spin reorientation transitions. In the former case, the work included experimental and theoretical studies to gain more fundamental insight into the origin and magnitude of EB, as well as to address important aspects of EB such as the asymmetry in the magnetic reversal mechanism, the role of interfacial structure, including compensated or uncompensated spins, AF domains, competing anisotropies and the angular dependence of the magnetization reversal process. Exchange bias is central to many magnetic technologies and driven by the fast development of nanotechnology, there is much interest in understanding the phenomenon of exchange bias on the nanoscale. By patterning, as the FM domain size reaches a lateral scale comparable to the AF domain size (~100nm), each nano-element can be treated as a separate and isolated exchange bias system that behaves independently. Therefore, the non-averaged, intrinsic, exchange bias, in all its complexity, can be studied. Such size and dimensionality effects, particularly in structures with lateral dimension of the order of their domain sizes, were studied by developing and implementing a novel Nano-imprint as well as convention optical lithography/patterning. However, one limitation of the NIL method is that after imprinting the material-deposition or -evaporation has to be done at around room temperature in order to keep the resists structure undisturbed. As a result, the method is unsuitable for epitaxial growth, since the latter often involves growth at elevated temperatures higher than the glass transition temperature of the resist. Therefore, a mask transfer NIL process was developed to grow epitaxial nanostructure arrays at elevated temperatures where organic resists are rendered unstable. In the case of the metal/oxide heterostructures, the domain structure of the metal is carefully modulated by that of the underlying oxide, opening the possibility of carrying out novel experiments to study spin-dependent domain-wall scattering and quantify domain wall resistance in mesoscopic geometries. Utilizing state-of-the-art characterization methods, using synchrotron radiation and electron holography, we addressed the critical role of all aspects of the microstructure, at relevant length scales, in determining these specific magnetic properties. Two significant highlights of this project were the use of photoemission electron microscopy (PEEM) work to elucidate their asymmetric magnetization reversal mechanism and the use of element-specific X-ray magnetic reflectivity and x-ray resonant scattering to probe buried interfaces, both of importance in understanding the fundamental physics of exchange bias. In the latter case, a complex magnetic interfacial configuration in Fe/MnPd, consisting of a 2-monolayer-thick induced ferromagnetic region, and pinned uncompensated Mn moments that reach far deeper (~13 Å), both in the antiferromagnet, were found. Such epitaxial EB samples also show in-plane reorientation transitions, determined by the competition between the interface exchange coupling and the intrinsic uniaxial energies, and is driven by the temperature, as well as the thickness of MnPd and Fe layers. Complementing these results, work on multilayers show that perpendicular EB arise from a complex interplay between unidirectional anisotropy at the terminating FM/AFM interface, the perpendicular anisotropy of the FM/nonmagnet(NM) multilayer stack and the overall magnetostatic energy of the structure. Collaborative work with Prof. R. Stamps (UWA) in modeling and analysis of slow-dynamics, using an inductive ferromagnetic resonance technique, were also carried out. Further details of our research is presented below broadly in five thematic areas. Overall, this research allowed us to obtain a deeper understanding of the range of related magnetic phenomena and establish pathways for potential technological applications of these thin film and patterned heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-healing Growth of LaNiO 3 on a Mixed-Terminated Perovskite Surface

Developing atomic-scale synthesis control is a prerequisite for understanding and engineering the exotic physics inherent to transition-metal oxide heterostructures. Thus, far, however, the number of materials systems explored has been extremely limited, particularly with regard to the crystalline substrate, which is routinely SrTiO 3 . Here, we investigate the growth of a rare-earth nickelate-LaNiO 3 -on (LaAlO 3 )(Sr 2 AlTaO 6 ) (LSAT) (001) by oxide molecular beam epitaxy (MBE). Whereas the LSAT substrates are smooth, they do not exhibit the single surface termination usually assumed necessary for control over the interface structure. Performing both nonresonant and resonant anomalous in situ synchrotron surface X-ray scattering during MBE growth, we show that reproducible heterostructures can be achieved regardless of both the mixed surface termination and the layer-by-layer deposition sequence. The rearrangement of the layers occurs dynamically during growth, resulting in the fabrication of high-quality LaNiO 3 /LSAT heterostructures with a sharp and consistent interfacial structure. This is due to the thermodynamics of the deposition window as well as the nature of the chemical species at interfaces-here, the flexible charge state of nickel at the oxide surface. This has important implications regarding the use of a wider variety of substrates for fundamental studies on complex oxide synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Si (sub X)Ge (sub 1-x)/Si Heterostructures for Device Applications Using Spectroscopic Ellipsometry

Spectroscopic ellipsometry (SE) characterization of several complex Si (sub X)Ge (sub 1-x)/Si heterostructures prepared for device fabrication, including structures for heterojunction bipolar transistors (HBT), p-type and n-type heterostructure modulation doped field effect transistors, has been performed. We have shown that SE can simultaneously determine all active layer thicknesses, Si (sub X)Ge (sub 1-x) compositions, and the oxide overlayer thickness, with only a general knowledge of the structure topology needed a priori. The characterization of HBT material included the SE analysis of a Si (sub X)Ge (sub 1-x) layer deeply buried (600 nanometers) under the silicon emitter and cap layers. In the SE analysis of n-type heterostructures, we examined for the first time a silicon layer under tensile strain. We found that an excellent fit can be obtained using optical constants of unstrained silicon to represent the strained silicon conduction layer. We also used SE to measure lateral sample homogeneity, providing quantitative identification of the inhomogeneous layer. Surface overlayers resulting from prior sample processing were also detected and measured quantitatively. These results should allow SE to be used extensively as a non-destructive means of characterizing Si (sub X)Ge (sub 1-x)/Si heterostructures prior to device fabrication and testing.

Sieg, R. M.↗

Emergent Ferromagnetism in CaRuO 3 /CaMnO 3 (111)-Oriented Superlattices

The boundary between CaRuO 3 and CaMnO 3 is an ideal test bed for emergent magnetic ground states stabilized through interfacial electron interactions. In this system, nominally antiferromagnetic and paramagnetic materials combine to yield interfacial ferromagnetism in CaMnO 3 due to electron leakage across the interface. In this work, we show that the crystal symmetry at the surface is a critical factor determining the nature of the interfacial interactions. Specifically, by growing CaRuO 3 /CaMnO 3 heterostructures along the (111) instead of the (001) crystallographic axis, we achieve a 3-fold enhancement of the magnetization and involve the CaRuO 3 layers in the ferromagnetism, which now spans both constituent materials. Importantly, the stabilization of a net magnetic moment in CaRuO 3 through strain effects has been long-sought but never consistently achieved, and our observations demonstrate the importance of interface engineering in the development of new functional heterostructures.

36 MATERIALS SCIENCE↗

Nanocrystal heterostructures of LiCoO 2 with conformal passivating shells

Stabilization of electrode–electrolyte interfaces is required to increase the energy stored in battery electrodes. Introducing redox-inactive ions on the electrode surface minimizes deleterious side reactions without affecting the bulk properties. A synthetic challenge exists to grow such layers conformally at each primary particle, to fully passivate interfaces that are buried in the final electrode architecture. The development of methods of sequential colloidal growth of complex oxides and overlayers, enabled by surfactant interactions, would provide novel means to advance toward this goal. For this, nanocrystals composed of LiCoO 2 , a commercially relevant material for high energy devices, were grown with a shell enriched in Al 3+ , deposited conformally through a one-pot colloidal synthetic method. The effects of synthetic conditions on the composition of the Al-rich shell and the corresponding electrochemical performance were investigated. The modified nanocrystals showed enhanced electrochemical properties, while maintaining carrier transport.

25 ENERGY STORAGE↗

Effect of fabrication processes on BaTiO 3 capacitor properties

There is an increasing desire to utilize complex functional electronic materials such as ferroelectrics in next-generation microelectronics. As new materials are considered or introduced in this capacity, an understanding of how we can process these materials into those devices must be developed. Here, the effect of different fabrication processes on the ferroelectric and related properties of prototypical metal oxide (SrRuO 3 )/ferroelectric (BaTiO 3 )/metal oxide (SrRuO 3 ) heterostructures is explored. Two different types of etching processes are studied, namely, wet etching of the top SrRuO 3 using a NaIO 4 solution and dry etching using an Ar + -ion beam (i.e., ion milling). Polarization-electric-field hysteresis loops for capacitors produced using both methods are compared. For the ion-milling process, it is found that the Ar + beam can introduce defects into the SrRuO 3 /BaTiO 3 /SrRuO 3 devices and that the milling depth strongly influences the defect level and can induce a voltage imprint on the function. Realizing that such processing approaches may be necessary, work is performed to ameliorate the imprint of the hysteresis loops via ex situ “healing” of the process-induced defects by annealing the ferroelectric material in a barium-and-oxygen-rich environment via a chemical-vapor-deposition-style process. This work provides a pathway for the nanoscale fabrication of these candidate materials for next-generation memory and logic applications.

36 MATERIALS SCIENCE↗

Nodeless High- T c Superconductivity in the Highly Overdoped CuO 2 Monolayer

We study the electronic structure and superconductivity in a CuO 2 monolayer grown recently on the d-wave cuprate superconductor Bi 2 Sr 2 CaCu 2 O 8+δ . Density functional theory calculations indicate a significant charge transfer across the interface such that the CuO 2 monolayer is heavily overdoped into the hole-rich regime yet inaccessible in bulk cuprates. We show that both the Cu d x 2 –y 2 and d 3z 2 –r 2 orbitals become important and the Fermi surface contains one electron and one hole pocket associated with the two orbitals, respectively. Constructing a minimal correlated two-orbital model for the e g complex, we show that the spin-orbital exchange interactions produce a nodeless superconductor with extended s-wave pairing symmetry and a pairing energy gap comparable to the bulk d-wave gap, in agreement with recent experiments. Here, the findings point to a direction of realizing new high-T c superconductors in ozone grown transition-metal-oxide monolayer heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In Situ Observation of Oxygen Vacancy Dynamics and Ordering in the Epitaxial LaCoO 3 System

Vacancy dynamics and ordering underpin the electrochemical functionality of complex oxides and strongly couple to their physical properties. In the field of the epitaxial thin films, where connection between chemistry and film properties can be most clearly revealed, the effects related to oxygen vacancies are attracting increasing attention. Here, we report a direct, real-time, atomic level observation of the formation of oxygen vacancies in the epitaxial LaCoO 3 thin films and heterostructures under the influence of the electron beam utilizing scanning transmission electron microscopy (STEM). In the case of LaCoO 3 /SrTiO 3 superlattice, the formation of the oxygen vacancies is shown to produce quantifiable changes in the interatomic distances, as well as qualitative changes in the symmetry of the Co sites manifested as off-center displacements. The onset of these changes was observed in both the [100]pc and [110]pc orientations in real time. Additionally, annular bright field images directly show the formation of oxygen vacancy channels along [110]pc direction. In the case of 15 u.c. LaCoO 3 thin film, we observe the sequence of events during beam-induced formation of oxygen vacancy ordered phases and find them consistent with similar processes in the bulk. Moreover, we record the dynamics of the nucleation, growth, and defect interaction at the atomic scale as these transformations happen. These results demonstrate that we can track dynamic oxygen vacancy behavior with STEM, generating atomic-level quantitative information on phase transformation and oxygen diffusion.

36 MATERIALS SCIENCE↗

Disentangled Cooperative Orderings in Artificial Rare-Earth Nickelates

Coupled transitions between distinct ordered phases are important aspects behind the rich phase complexity of correlated oxides that hinder our understanding of the underlying phenomena. For this reason, fundamental control over complex transitions has become a leading motivation of the designer approach to materials. We have devised a series of new superlattices by combining a Mott insulator and a correlated metal to form ultrashort period superlattices, which allow one to disentangle the simultaneous orderings in RENiO 3 . Tailoring an incommensurate heterostructure period relative to the bulk charge ordering pattern suppresses the charge order transition while preserving metal-insulator and antiferromagnetic transitions. Such selective decoupling of the entangled phases resolves the long-standing puzzle about the driving force behind the metal-insulator transition and points to the site-selective Mott transition as the operative mechanism. In conclusion, this designer approach emphasizes the potential of heterointerfaces for selective control of simultaneous transitions in complex materials with entwined broken symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Core-Shell Heterostructures as Solid Oxide Fuel Cell Electrodes

The goals of the project are to synthesize and deploy core-shell heterostructures as solid oxide fuel cell (SOFC) cathodes which exhibit high oxygen reduction rates at lower operating temperatures resulting in high performance at lower operating temperature and simultaneously exhibit longterm resistance to Cr-impurity attack induced performance degradation. An ancillary objective is to eliminate cumbersome, multiple infiltration steps in the cathode to achieve high performance. The expected outcomes are (1) a novel, environmentally benign, and inexpensive synthesis tool for synthesizing complex cathode powders, scalable to high volumes; (2) decrease in energy expenditure during synthesis of cathode powders; (3) up to a factor of 1.5 improvement in maximum power density of single cells at 700ºC; and (4) significant improvements in cell performance degradation rates down to 0.02%/1000 h.

03 NATURAL GAS↗

Core-Shell Heterostructures as Solid Oxide Fuel Cell Electrodes

The goals of the project are to synthesize and deploy core-shell heterostructures as solid oxide fuel cell (SOFC) cathodes which exhibit high oxygen reduction rates at lower operating temperatures resulting in high performance at lower operating temperature and simultaneously exhibit longterm resistance to Cr-impurity attack induced performance degradation. An ancillary objective is to eliminate cumbersome, multiple infiltration steps in the cathode to achieve high performance. The expected outcomes are (1) a novel, environmentally benign, and inexpensive synthesis tool for synthesizing complex cathode powders, scalable to high volumes; (2) decrease in energy expenditure during synthesis of cathode powders; (3) up to a factor of 1.5 improvement in maximum power density of single cells at 700ºC; and (4) significant improvements in cell performance degradation rates down to 0.02%/1000 h.

03 NATURAL GAS↗

Core-Shell Heterostructures as Solid Oxide Fuel Cell Electrodes Quarterly Report

The goals of the project are to synthesize and deploy core-shell heterostructures as solid oxide fuel cell (SOFC) cathodes which exhibit high oxygen reduction rates at lower operating temperatures resulting in high performance at lower operating temperature and simultaneously exhibit longterm resistance to Cr-impurity attack induced performance degradation. An ancillary objective is to eliminate cumbersome, multiple infiltration steps in the cathode to achieve high performance. The expected outcomes are (1) a novel, environmentally benign, and inexpensive synthesis tool for synthesizing complex cathode powders, scalable to high volumes; (2) decrease in energy expenditure during synthesis of cathode powders; (3) up to a factor of 1.5 improvement in maximum power density of single cells at 700ºC; and (4) significant improvements in cell performance degradation rates down to 0.02%/1000 h.

20 FOSSIL-FUELED POWER PLANTS↗

Core-Shell Heterostructures as Solid Oxide Fuel Cell Electrodes Quarterly Report

The goals of the project are to synthesize and deploy core-shell heterostructures as solid oxide fuel cell (SOFC) cathodes which exhibit high oxygen reduction rates at lower operating temperatures resulting in high performance at lower operating temperature and simultaneously exhibit longterm resistance to Cr-impurity attack induced performance degradation. An ancillary objective is to eliminate cumbersome, multiple infiltration steps in the cathode to achieve high performance. The expected outcomes are (1) a novel, environmentally benign, and inexpensive synthesis tool for synthesizing complex cathode powders, scalable to high volumes; (2) decrease in energy expenditure during synthesis of cathode powders; (3) up to a factor of 1.5 improvement in maximum power density of single cells at 700ºC; and (4) significant improvements in cell performance degradation rates down to 0.02%/1000 h.

03 NATURAL GAS↗

Structure−Property Correlations in Hybrid Polymer−Nanoparticle Electrospun Fibers and Plasmonic Control over their Dichroic Behavior

Electrospinning constitutes a simple and versatile approach of fabricating polymer heterostructures composed of nanofibers. A preferred alignment of polymer crystallites stems from complex shear elongational forces and generates a strong intrinsic optical anisotropy in typical electrospun fibers of semicrystalline polymers. While it can prove useful for certain devices, this intrinsic anisotropy can be extremely detrimental for other key applications such as high-performance polymer-based lighting and solar-energy harvesting platforms. We report a dramatic reduction in the intrinsic dichroism of electrospun poly(ethylene oxide) fibers resulting from the incorporation of inorganic nanoparticles in the polymer matrix. This effect is shown to originate from a controllable randomization of the orientational ordering of the crystalline domains in the hybrid nanofibers and not merely from a reduction in crystallinity. This improved understanding of the crystalline structure-optical property correlation then leads to a better control over the intrinsic anisotropy of electrospun fibers using localized surface-plasmon enhancement effects around metallic nanoparticles.

14 SOLAR ENERGY↗

Controlling Metal–Organic Framework/ZnO Heterostructure Kinetics through Selective Ligand Binding to ZnO Surface Steps

Metal–organic framework (MOF) heterostructures exhibit unique properties beyond those of individual components, but their design requires an understanding of energetic and kinetic controls at MOF–substrate interfaces. Although the structural relationship has been widely used in heterostructure design, it overlooks the interplay between the organic ligand and the substrate which controls the kinetics and energetics of growth of the final structure. In this study, we used zeolitic imidazolate frameworks (ZIF-8) on ZnO as a model system to evaluate this interplay via in situ monitoring and simulations. Our results demonstrate multiple roles of the 2-methyl-imidazole (2-MIM) ligand as “dissolution-promoter”, “step-pinner”, and “terrace-binder” on the ZnO (001) face and “dissolution-promoter” and “terrace-binder” on the ZnO (100) face. Through these multiple face-specific roles, 2-MIM modulates ZnO dissolution kinetics and, hence, the Zn 2+ release rate, tuning local supersaturations that dictating the characteristic ZIF-8 crystallization kinetics on different substrate faces. The critical thickness for transition from 2D to 3D growth is dictated by competition between interfacial and strain energies. The atomic-scale mechanism of the coupled substrate dissolution and MOF growth, mediated by selective linker–substrate binding, furnishes a new synthesis pathway for other complex heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗