Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Energy and cost analysis of a solar-hydrogen combined heat and power system for remote power supply using a computer simulation

A simulation program, based on Visual Pascal, for sizing and techno-economic analysis of the performance of solar-hydrogen combined heat and power systems for remote applications is described. The accuracy of the submodels is checked by comparing the real performances of the system's components obtained from experimental measurements with model outputs. The use of the heat generated by the PEM fuel cell, and any unused excess hydrogen, is investigated for hot water production or space heating while the solar-hydrogen system is supplying electricity. A 5 kWh daily demand profile and the solar radiation profile of Melbourne have been used in a case study to investigate the typical techno-economic characteristics of the system to supply a remote household. The simulation shows that by harnessing both thermal load and excess hydrogen it is possible to increase the average yearly energy efficiency of the fuel cell in the solar-hydrogen system from just below 40% up to about 80% in both heat and power generation (based on the high heating value of hydrogen). The fuel cell in the system is conventionally sized to meet the peak of the demand profile. However, an economic optimisation analysis illustrates that installing a larger fuel cell could lead to up to a 15% reduction in the unit cost of the electricity to an average of just below 90 c/kWh over the assessment period of 30 years. Further, for an economically optimal size of the fuel cell, nearly a half the yearly energy demand for hot water of the remote household could be supplied by heat recovery from the fuel cell and utilising unused hydrogen in the exit stream. Such a system could then complement a conventional solar water heating system by providing the boosting energy (usually in the order of 40% of the total) normally obtained from gas or electricity. (author)

14 SOLAR ENERGY↗

The Mechanism of the Translocation Step in DNA Replication by DNA Polymerase I: A Computer Simulation Analysis

High-fidelity DNA polymerases copy DNA rapidly and accurately by adding correct deoxynucleotide triphosphates to a growing primer strand of DNA. Following nucleotide incorporation, a series of conformational changes translocate the DNA substrate by one base pair step, readying the polymerase for the next round of incorporation. Molecular dynamics simulations indicate that the translocation consists globally of a polymerase fingers-opening transition, followed by the DNA displacement and the insertion of the template base into the preinsertion site. They also show that the pyrophosphate release facilitates the opening transition and that the universally conserved Y714 plays a key role in coupling polymerase opening to DNA translocation. The transition involves several metastable intermediates in one of which the O helix is bent in the vicinity of G711. Completion of the translocation appears to require a gating motion of the O1 helix, perhaps facilitated by the presence of G715. These roles are consistent with the high level of conservation of Y714 and the two glycine residues at these positions. It is likely that a corresponding mechanism is applicable to other polymerases.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrogen Dynamics in Supercritical Water Probed by Neutron Scattering and Computer Simulations

In this work, an investigation of supercritical water is presented combining inelastic and deep inelastic neutron scattering experiments and molecular dynamics simulations based on a machine-learned potential of ab initio quality. The local hydrogen dynamics is investigated at 250 bar and in the temperature range of 553–823 K, covering the evolution from subcritical liquid to supercritical gas-like water. The evolution of libration, bending, and stretching motions in the vibrational density of states is studied, analyzing the spectral features by a mode decomposition. Moreover, the hydrogen nuclear momentum distribution is measured, and its anisotropy is probed experimentally. It is shown that hydrogen bonds survive up to the higher temperatures investigated, and we discuss our results in the framework of the coupling between intramolecular modes and intermolecular librations. Results show that the local potential affecting hydrogen becomes less anisotropic within the molecular plane in the supercritical phase, and we attribute this result to the presence of more distorted hydrogen bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computer Simulation of the Phase Stabilities of Lithiated TiO2 Polymorphs

The structure and phase stability of a series of lithiated titania polymorphs were determined using spin unrestricted density functional theory and the B3LYP exchange-correlation potential. These calculations were performed following the linear combination of atomic orbital approach. The lithium content, x, of the titania phases was varied from 0 to 1. Rutile and anatase were found to be the most stable polymorphs in the absence of lithium. Anatase and ramsdellite were calculated to become energetically favored over rutile upon lithium insertion. The hexagonal, spinel, and rocksalt polymorphs were predicted to have stabilities approaching that of rutile with increasing lithium content. At x=1, the hexagonal, spinel, rocksalt and rutile polymorphs showed essentially equivalent total energies. This prediction is consistent with the experimental observation that rutile electrodes, in particular those that consist of nanomaterials, undergo a phase transformation to the hexagonal, spinel, or rocksalt structure upon lithium insertion. In addition, a set of potential parameters was developed to model lithium insertion with a potential shell model. The potential model was found to give good agreement with the structure and energetics of the lithiated titania polymorphs, as determined with the ab initio calculations, at all lithium contents.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Computational simulation and interpretation of the low-lying excited electronic states and electronic spectrum of thioanisole

Three singlet states, namely a closed-shell ground state and two excited states with 1 ππ* and 1 nσ* character, have been suggested to be responsible for the radiationless decay or photochemical reaction of photoexcited thioanisole. The correct interpretation of the electronic spectrum is critical for understanding the character of these low-lying excited states, but the experimental spectrum is yet to be fully interpreted. In the work reported here, we investigated the nature of those three states and a fourth singlet state of thioanisole using electronic structure calculations by multireference perturbation theory, by completely-renormalized equation-of-motion coupled cluster theory with single and double excitations and noniterative inclusion of connected triples (CR-EOM-CCSD(T)), and by linear-response time-dependent density functional theory (TDDFT). We clarified the assignment of the electronic spectrum by simulating it using a normal-mode sampling approach combined with TDDFT in the Tamm–Dancoff approximation (TDA). The understanding of the electronic states and of the accuracy of the electronic structure methods lays the foundation of our future work of constructing potential energy surfaces.

74 ATOMIC AND MOLECULAR PHYSICS↗

Computer Simulation of the Light Yield Nonlinearity of Inorganic Scintillators

To probe the nature of the physical processes responsible for the nonlinear photon response of inorganic scintillators, we have combined a Monte Carlo (MC) code for calculating the microscopic spatial distributions of electron-hole pairs with a kinetic Monte Carlo (KMC) model of energy-transfer processes. In this publication, we focus on evaluating the contribution of an annihilation mechanism between self-trapped excitons (STE) to the photon response of pure CsI and Ce-doped LaBr3. A KMC model of scintillation mechanisms in pure CsI was developed previously and we introduce in this publication a similar model for Ce-doped LaBr3. We show that the KMC scintillation model is able to reproduce both the kinetics and efficiency of the scintillation process in Ce-doped LaBr3. Relative light output curves were generated at several temperatures for both scintillators from simulations carried out at 2, 5, 10, 20, 100, and 400 keV. These simulations suggest that STE-STE annihilation can account for the initial rise in relative light yield with increasing incident energy. This is due to the fact that the proportion of high-density regions decreases as the incident energy increases thus reducing the likelihood for STE-STE encounter. In addition, the simulations clearly show a lack of temperature dependence of the relative light output, in agreement with a majority of experimental work on the temperature dependence of nonlinearity in inorganic scintillators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Computer Simulation of Electron Thermalization in CsI and CsI(Tl)

A Monte Carlo (MC) model was developed and implemented to simulate the thermalization of electrons in inorganic scintillator materials. The model incorporates electron scattering with both longitudinal optical and acoustic phonons. In this paper, the MC model was applied to simulate electron thermalization in CsI, both pure and doped with a range of thallium concentrations. The inclusion of internal electric fields was shown to increase the fraction of recombined electron-hole pairs and to broaden the thermalization distance and thermalization time distributions. The MC simulations indicate that electron thermalization, following {gamma}-ray excitation, takes place within approximately 10 ps in CsI and that electrons can travel distances up to several hundreds of nanometers. Electron thermalization was studied for a range of incident {gamma}-ray energies using electron-hole pair spatial distributions generated by the MC code NWEGRIM (NorthWest Electron and Gamma Ray Interaction in Matter). These simulations revealed that the partition of thermalized electrons between different species (e.g., recombined with self-trapped holes or trapped at thallium sites) vary with the incident energy. Implications for the phenomenon of nonlinearity in scintillator light yield are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Computer simulation on spatial resolution of X-ray bright-field imaging by dynamical diffraction theory for a Laue-case crystal analyzer

Recently, dark-field imaging (DFI) and bright-field imaging (BFI) have been proposed and applied to visualize X-ray refraction effects yielded in biomedical objects. In order to clarify the spatial resolution due to a crystal analyzer in Laue geometry, a program based on the Takagi-Taupin equation was modified to be used for carrying out simulations to evaluate the spatial resolution of images coming into a Laue angular analyzer (LAA). The calculation was done with a perfect plane wave for diffraction wave-fields, which corresponded to BFI, under the conditions of 35 keV and a diffraction index 440 for a 2100 {mu}m thick LAA. As a result, the spatial resolution along the g-vector direction showed approximately 37.5 {mu}m. 126 {mu}m-thick LAA showed a spatial resolution better than 3.1 {mu}m under the conditions of 13.7 keV and a diffraction index 220.

36 MATERIALS SCIENCE↗

Heating-induced glass-glass and glass-liquid transformations in computer simulations of water

Water exists in at least two families of glassy states, broadly categorized as the low-density (LDA) and high-density amorphous ice (HDA). Remarkably, LDA and HDA can be reversibly interconverted via appropriate thermodynamic paths, such as isothermal compression and isobaric heating, exhibiting first-order-like phase transitions. We perform out-of-equilibrium molecular dynamics simulations of glassy water using the ST2 model to study the evolution of LDA and HDA upon isobaric heating. Depending on pressure, glass-to-glass, glass-to-crystal, glass-to-vapor, as well as glass-to-liquid transformations are found. Specifically, heating LDA results in the following transformations, with increasing heating pressures: (i) LDA-to-vapor (sublimation), (ii) LDA-to-liquid (glass transition), (iii) LDA-to-HDA-to-liquid, (iv) LDA-to-HDA-to-liquid-to-crystal, and (v) LDA-to-HDA-to-crystal. Similarly, heating HDA results in the following transformations, with decreasing heating pressures: (a) HDA-to-crystal, (b) HDA-to-liquid-to-crystal, (c) HDA-to-liquid (glass transition), (d) HDA-to-LDA-to-liquid, and (e) HDA-to-LDA-to-vapor. A more complex sequence may be possible using lower heating rates. For each of these transformations, we determine the corresponding transformation temperature as function of pressure, and provide a P-T “phase diagram” for glassy water based on isobaric heating. Our results for isobaric heating dovetail with the LDA-HDA transformations reported for ST2 glassy water based on isothermal compression/decompression processes [Chiu et al., J. Chem. Phys. 139, 184504 (2013)]. The resulting phase diagram is consistent with the liquid-liquid phase transition hypothesis. At the same time, the glass phase diagram is sensitive to sample preparation, such as heating or compression rates. Interestingly, at least for the rates explored, our results suggest that the LDA-to-liquid (HDA-to-liquid) and LDA-to-HDA (HDA-to-LDA) transformation lines on heating are related, both being associated with the limit of kinetic stability of LDA (HDA)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties of a soft-core model of methanol: An integral equation theory and computer simulation study

Thermodynamic and structural properties of a coarse-grained model of methanol are examined by Monte Carlo simulations and reference interaction site model (RISM) integral equation theory. Methanol particles are described as dimers formed from an apolar Lennard-Jones sphere, mimicking the methyl group, and a sphere with a core-softened potential as the hydroxyl group. Different closure approximations of the RISM theory are compared and discussed. The liquid structure of methanol is investigated by calculating site-site radial distribution functions and static structure factors for a wide range of temperatures and densities. Results obtained show a good agreement between RISM and Monte Carlo simulations. The phase behavior of methanol is investigated by employing different thermodynamic routes for the calculation of the RISM free energy, drawing gas-liquid coexistence curves that match the simulation data. Preliminary indications for a putative second critical point between two different liquid phases of methanol are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mathematical model and software complex for computer simulation of field emission electron sources

The software complex developed in MATLAB allows modelling of function of diode and triode structures based on field emission electron sources with complex sub-micron geometry, their volt-ampere characteristics, calculating distribution of electric field for educational and research needs. The goal of this paper is describing the physical-mathematical model, calculation methods and algorithms the software complex is based on, demonstrating the principles of its function and showing results of its work. For getting to know the complex, a demo version with graphical user interface is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computer simulation structure and vibrations of small metal cluster on the Cu (111) surface

Vibrational properties of the small tetrahedral cluster of Co on the Cu (111) surface are studied by using tight-binding second moment approximation interatomic interaction potentials. It was shown that interaction of the clusters with substrate leads to arising of frustrated translation and frustrated rotation in-plane polarized vibrational modes localized on the cluster atoms. The Co{sub 4} cluster on the surface the high frequency modes remain strongly localized and mixed with the nearest neighbor atoms vibrations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High temperature breakdown of the Stokes-Einstein relation in a computer simulated Cu-Zr melt

Transport properties and the Stokes-Einstein (SE) relation in liquid Cu{sub 8}Zr{sub 3} are studied by molecular dynamics simulation with a modified embedded atom potential. The critical temperature T{sub c} of mode coupling theory (MCT) is derived as 930 K from the self-diffusion coefficient D and viscosity η. The SE relation breaks down around T{sub SE} = 1900 K, which is far above T{sub c}. At temperatures below T{sub SE}, the product of D and η fluctuates around a constant value, similar to the prediction of MCT near T{sub c}. The influence of the microscopic atomic motion on macroscopic properties is investigated by analyzing the time dependent liquid structure and the self-hole filling process. The self-holes for the two components are preferentially filled by atoms of the same component. The self-hole filling dynamics explains the different breakdown behaviors of the SE relation in Zr-rich liquid CuZr{sub 2} compared to Cu-rich Cu{sub 8}Zr{sub 3}. At T{sub SE}, a kink is found in the temperature dependence of both partial and total coordination numbers for the three atomic pair combinations and of the typical time of self-hole filling. This indicates a strong correlation between liquid structure, atomic dynamics, and the breakdown of SE relation. The previously suggested usefulness of the parameter d(D{sub 1}/D{sub 2})/dT to predict T{sub SE} is confirmed. Additionally we propose a viscosity criterion to predict T{sub SE} in the absence of diffusion data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation and optimization of the performance of frame geometries for lithium-ion battery application by computer simulation

Tailoring battery geometries is essential for many applications, as geometry influences the delivered capacity value. Two geometries, frame and conventional, have been studied and, for a given scan rate of 330C, the square frame shows a capacity value of 305,52 Ahm{sup −2}, which is 527 times higher than the one for the conventional geometry for a constant the area of all components.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational simulations of solvation force and squeezing out of dodecane chain molecules in an atomic force microscope

Understanding the squeeze out behaviors of liquid films at nanometer scale in an atomic force microscope (AFM) has been a significant interest since the 1990s. We carry out all-atom static-mode AFM simulations in a liquid-vapor molecular dynamics ensemble to investigate the solvation force oscillation and squeeze out mechanisms of a confined linear dodecane fluid between a gold AFM tip and a mica substrate. Solvation force oscillations are found to be associated with the layering transition of the liquid film and unstable jumps of the AFM tip. Detailed structural analyses and molecular animations show that the local permeation of chain molecules and the squeeze out of molecules near the edge of contact promote the layering transition under compression. The confinement-induced slow down dynamics is manifested by the decrease in diffusivity and increase in rotational relaxation times. Furthermore, the persistent diffusive behavior of dodecane chain molecules even in the single-monolayer film is attributed to the chain sliding motions in the film due to the substantial vacancy space and thermal fluctuations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗