SEARCH · Search NASA

Results for “conditional generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1985

The evolution of large-scale structure in a universe dominated by cold dark matter

The results of numerical simulations of nonlinear gravitational clustering in universes dominated by weakly interacting, 'cold' dark matter are presented. The numerical methods used and the way in which initial conditions were generated are described, and the simulations performed are catalogued. The evolution of the fundamental statistical properties of the models is described and their comparability with observation is discussed. Graphical comparisons of these open models with the observed galaxy distribution in a large redshift survey are made. It is concluded that a model with a cosmological density parameter omega equal to one is quite unacceptable if galaxies trace the mass distribution, and that models with omega of roughly two, while better, still do not provide a fully acceptable match with observation. Finally, a situation in which galaxy formation is suppressed except in sufficiently dense regions is modelled which leads to models which can agree with observation quite well even for omega equal to one.

Davis, M.↗

NASA NTRS1985

The wind-disk interaction in X-ray burst sources

The interaction between a radiatively driven wind from the surface of a neutron star and an accretion disk surrounding the star is considered. A bow shock forms if the wind is supersonic when it reaches the inner edge of the disk. The resultant heating of the wind material can enhance the X-ray luminosity of the source, but this effect is important only if the wind is very strong. If the terminal velocity of the wind is at least about 0.99c and the integrated kinetic energy flux of the wind is at least about 30 times the Eddington limit, then super-Eddington X-ray luminosities will be generated. The conditions that are required for the formation of such a wind are briefly discussed. Also developed are estimates for the spectral shape, color temperature, and X-ray luminosity resulting from the wind-disk interaction, and it is shown that these results are consistent with the observed properties of type I cosmic X-ray bursts.

Melia, F.↗

NASA NTRS1987

Solution of the surface Euler equations for accurate three-dimensional boundary-layer analysis of aerodynamic configurations

The three-dimensional boundary-layer equations in the limit as the normal coordinate tends to infinity are called the surface Euler equations. The present paper describes an accurate method for generating edge conditions for three-dimensional boundary-layer codes using these equations. The inviscid pressure distribution is first interpolated to the boundary-layer grid. The surface Euler equations are then solved with this pressure field and a prescribed set of initial and boundary conditions to yield the velocities along the two surface coordinate directions. Results for typical wing and fuselage geometries are presented. The smoothness and accuracy of the edge conditions obtained are found to be superior to the conventional interpolation procedures.

Iyer, V.↗

NASA NTRS1990

Strategies for concurrent processing of complex algorithms in data driven architectures

The performance modeling and enhancement for periodic execution of large-grain, decision-free algorithms in data flow architectures is examined. Applications include real-time implementation of control and signal processing algorithms where performance is required to be highly predictable. The mapping of algorithms onto the specified class of data flow architectures is realized by a marked graph model called ATAMM (Algorithm To Architecture Mapping Model). Performance measures and bounds are established. Algorithm transformation techniques are identified for performance enhancement and reduction of resource (computing element) requirements. A systematic design procedure is described for generating operating conditions for predictable performance both with and without resource constraints. An ATAMM simulator is used to test and validate the performance prediction by the design procedure. Experiments on a three resource testbed provide verification of the ATAMM model and the design procedure.

Stoughton, John W.↗

NASA NTRS1990

Strategies for concurrent processing of complex algorithms in data driven architectures

Performance modeling and performance enhancement for periodic execution of large-grain, decision-free algorithms in data flow architectures are discussed. Applications include real-time implementation of control and signal processing algorithms where performance is required to be highly predictable. The mapping of algorithms onto the specified class of data flow architectures is realized by a marked graph model called algorithm to architecture mapping model (ATAMM). Performance measures and bounds are established. Algorithm transformation techniques are identified for performance enhancement and reduction of resource (computing element) requirements. A systematic design procedure is described for generating operating conditions for predictable performance both with and without resource constraints. An ATAMM simulator is used to test and validate the performance prediction by the design procedure. Experiments on a three resource testbed provide verification of the ATAMM model and the design procedure.

Som, Sukhamoy↗

NASA NTRS1991

Energy-heading transients in atmospheric flight guidance for airbreathing hypersonic vehicles

A time-range-fuel optimization problem is formulated for an airbreathing, hypersonic vehicle. Singular perturbation theory is used to decompose the problem into simpler subproblems. Analysis of the cruise-dash problem shows the importance of a Mach-limit. Energy-heading transients are studied and a family of trajectories, fairing asymptotically to a cruise condition, are generated.

Cliff, Eugene M.↗

NASA NTRS1993

Radio stimulation and diagnostics of space plasmas

We have investigated the small-scale topside ionospheric plasma structures first observed at Millstone Hill, Massachusetts with the 440 MHz incoherent scatter radar. These small-scale obliquely propagating plasma modes occurring in the vicinity of the midlatitude ionospheric trough, have large radar cross-sections and narrow spectral widths. They have, until recently, been dismissed solely as hard target contamination of the incoherent scatter radar. The geophysical conditions associated with the ionospheric trough, such as the field-aligned current activity and steep plasma density gradients, suggest that these recently discovered small-scale topside ionospheric plasmas may also appear in the auroral and polar ionosphere. In fact, this speculation has been corroborated by the preliminary experiments and data analyses at Tromso, Norway and Sondrestromfjord, Greenland. The primary research results are highlighted. Described in Section 3 are the experiments conducted at Arecibo, Puerto Rico in the past summer for simulating the geophysical conditions of generating these topside ionospheric plasma structures. Recommendation for the future research is finally given. Attached as the appendix of this report are several chapters which present the detailed results of research in the concerned topside ionospheric clutter. Highlights of the research results include: (1) causes of the enhanced radar backscatter (ERB) phenomenon; (2) occurrence of the ERB phenomenon; (3) altitudes of the ERB phenomenon; (4) strength of the ERB returns; (5) range of altitudes of the ERB returns; (6) occurrence frequency of the ERB phenomenon; (7) Doppler effect of the ERB phenomenon; (8) persistency of the ERB; and (9) distinction between ERB phenomenon and space object signatures.

Lee, Min-Chang↗

NASA NTRS1993

Assessment of crack growth in a space shuttle main engine first-stage, high-pressure fuel turbopump blade

A two-dimensional finite element fracture mechanics analysis of a space shuttle main engine (SSME) turbine blade firtree was performed using the MARC finite element code. The analysis was conducted under combined effects of thermal and mechanical loads at steady-state conditions. Data from a typical engine stand cycle of the SSME were used to run a heat transfer analysis and, subsequently, a thermal structural fracture mechanics analysis. Temperature and stress contours for the firtree under these operating conditions were generated. High stresses were found at the firtree lobes where crack initiation was triggered. A life assessment of the firtree was done by assuming an initial and a final crack size.

Abdul-Aziz, Ali↗

NASA NTRS1993

Gas dynamic simulations of galaxy formation

Results are presented from a simulation modeling the formation of a group of galaxies in a 'standard' cold, dark matter universe with delta = 1, h sub 0 = 50 km/(s(Mpc)), baryon fraction omega sub b = 0.1 and spectrum normalization sigma sub 8 = 0.6 (bias parameter b = 1.7). Initial conditions are generated within a periodic box with comoving length 16 Mpc in a manner constrained to produce a small cluster of total mass approximately 10 exp 14 solar mass. Two sets of 643 particles are used to model the dark matter and baryon fluids. Each gas particle represents 1.08 x 10 exp -8 solar mass, implying an L* galaxy is resolved by approximately 1000 particles. The system is evolved self-consistently in three dimensions using the combined N-body/hydrodynamic scheme P3MSPH up to a final redshift z = 1. Evolving to the present is prohibited by the fact that the mean density in the simulated volume is above critical and the entire volume would be going nonlinear beyond this point, We are currently analyzing another run with somewhat poorer mass resolution which was evolved to the present.

Evrard, August E.↗

NASA NTRS1992

Application of space-marching methods to hypersonic forebody flow fields

The heavy reliance on CFD in the design of hypersonic flight vehicles emphasizes the importance of choosing computationally efficient techniques. As a result, the development and application of space-marching flow solvers for the parabolized Navier-Stokes equations have received considerable attention in the past decade. This paper summarizes a space-marching approach used at NASA Ames Research Center for the analysis of hypersonic vehicle forebodies. Aspects of the simulation process are addressed that contain features unique to space-marching flow solvers, such as grid generation, initial condition specification, and finite-rate chemistry models. For completeness, sections are also included on turbulence modeling and equilibrium air chemistry modeling. The discussion includes an overview of the computational methods utilized as well as a number of relevant results.

Lawrence, Scott L.↗

NASA NTRS1993

Assumed modes method and flexible multibody dynamics

The use of assumed modes in flexible multibody dynamics algorithms requires the evaluation of several domain dependent integrals that are affected by the type of modes used. The implications of these integrals - often called zeroth, first and second order terms - are investigated in this paper, for arbitrarily shaped bodies. Guidelines are developed for the use of appropriate boundary conditions while generating the component modal models. The issue of whether and which higher order terms must be retained is also addressed. Analytical results, and numerical results using the Shuttle Remote Manipulator System as the multibody system, are presented to qualitatively and quantitatively address these issues.

Tadikonda, S. S. K.↗

NASA NTRS1994

On-orbit spacecraft servicing: An element in the evolution of space robotics applications

This paper addresses the renewed interest in on-orbit spacecraft servicing (OSS), and how it fits into the evolution of space applications for intelligent robots. Investment in the development of space robotics and associated technologies is growing as nations recognize that it is a critical component of the exploration and commercial development of space. At the same time, changes in world conditions have generated a renewal of the interest in OSS. This is reflected in the level of activity in the U.S., Japan and Europe in the form of studies and technology demonstration programs. OSS is becoming widely accepted as an opportunity in the evolution of space robotics applications. Importantly, it is a feasible proposition with current technologies and the direction of ongoing research and development activities. Interest in OSS dates back more than two decades, and several programs have been initiated, but no operational system has come on line, arguably with the Shuttle as the exception. With new opportunities arising, however, a fresh look at the feasibility of OSS is warranted. This involves the resolution of complex market, technical and political issues, through market studies, economic analyses, mission requirement definitions, trade studies, concept designs and technology demonstrations. System architectures for OSS are strongly dependent on target spacecraft design and launch delivery systems. Performance and cost factors are currently forcing significant changes in these areas. This presents both challenges and opportunities in the provision of OSS services. In conclusion, there is no question OSS will become a reality, but only when the technical feasibility is combined with either economic viability or political will. In the evolution of space robotics satellite servicing can become the next step towards its eventual role in support of planetary exploration and human beings' journey out into the universe.

Anders, Carl J.↗

NASA NTRS2000

Resin Film Infusion (RFI) Process Modeling for Large Transport Aircraft Wing Structures

This investigation completed the verification of a three-dimensional resin transfer molding/resin film infusion (RTM/RFI) process simulation model. The model incorporates resin flow through an anisotropic carbon fiber preform, cure kinetics of the resin, and heat transfer within the preform/tool assembly. The computer model can predict the flow front location, resin pressure distribution, and thermal profiles in the modeled part. The formulation for the flow model is given using the finite element/control volume (FE/CV) technique based on Darcy's Law of creeping flow through a porous media. The FE/CV technique is a numerically efficient method for finding the flow front location and the fluid pressure. The heat transfer model is based on the three-dimensional, transient heat conduction equation, including heat generation. Boundary conditions include specified temperature and convection. The code was designed with a modular approach so the flow and/or the thermal module may be turned on or off as desired. Both models are solved sequentially in a quasi-steady state fashion. A mesh refinement study was completed on a one-element thick model to determine the recommended size of elements that would result in a converged model for a typical RFI analysis. Guidelines are established for checking the convergence of a model, and the recommended element sizes are listed. Several experiments were conducted and computer simulations of the experiments were run to verify the simulation model. Isothermal, non-reacting flow in a T-stiffened section was simulated to verify the flow module. Predicted infiltration times were within 12-20% of measured times. The predicted pressures were approximately 50% of the measured pressures. A study was performed to attempt to explain the difference in pressures. Non-isothermal experiments with a reactive resin were modeled to verify the thermal module and the resin model. Two panels were manufactured using the RFI process. One was a stepped panel and the other was a panel with two 'T' stiffeners. The difference between the predicted infiltration times and the experimental times was 4% to 23%.

Loos, Alfred C.↗

NASA NTRS2001

Solid-State Power Generating Microdevices for Distributed Space System Architectures

Deep space missions have a strong need for compact, high power density, reliable and long life electrical power generation and storage under extreme temperature conditions. Conventional power generating devices become inefficient at very low temperatures (temperatures lower than 200 K encountered during Mars missions for example) and rechargeable energy storage devices cannot be operated thereby limiting mission duration. At elevated temperatures (for example for planned solar probe or Venus lander missions), thin film interdiffusion destroys electronic devices used for generating and storing power. Solar power generation strongly depends upon the light intensity, which falls rapidly in deep interplanetary missions (beyond 5 AU), and in planetary missions in the sun shadow or in dusty environments (Mars, for example). Radioisotope thermoelectric generators (RTGs) have been successfully used for a number of deep space missions RTGs. However, their energy conversion efficiency and specific power characteristics are quite low, and this technology has been limited to relatively large systems (more than 100 W). The National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory (JPL) have been planning the use of much smaller spacecrafts that will incorporate a variety of microdevices and miniature vehicles such as microdetectors, microsensors, and microrovers. Except for electrochemical batteries and solar cells, there are currently no available miniaturized power sources. Novel technologies that will function reliably over a long duration mission (ten years and over), in harsh environments (temperature, pressure, and atmosphere) must be developed to enable the success of future space missions. It is also expected that such micropower sources could have a wide range of terrestrial applications, in particular when the limited lifetime and environmental limitations of batteries are key factors. Additional information is contained in the original extended abstract.

Fleurial, J.-P.↗

NASA NTRS2001

State-space receptive fields of semicircular canal afferent neurons in the bullfrog

Receptive fields are commonly used to describe spatial characteristics of sensory neuron responses. They can be extended to characterize temporal or dynamical aspects by mapping neural responses in dynamical state spaces. The state-space receptive field of a neuron is the probability distribution of the dynamical state of the stimulus-generating system conditioned upon the occurrence of a spike. We have computed state-space receptive fields for semicircular canal afferent neurons in the bullfrog (Rana catesbeiana). We recorded spike times during broad-band Gaussian noise rotational velocity stimuli, computed the frequency distribution of head states at spike times, and normalized these to obtain conditional pdfs for the state. These state-space receptive fields quantify what the brain can deduce about the dynamical state of the head when a single spike arrives from the periphery. c2001 Elsevier Science B.V. All rights reserved.

Non-NASA Center↗

NASA NTRS2005

Aerosol climatology using a tunable spectral variability cloud screening of AERONET data

Can cloud screening of an aerosol data set, affect the aerosol optical thickness (AOT) climatology? Aerosols, humidity and clouds are correlated. Therefore, rigorous cloud screening can systematically bias towards less cloudy conditions, underestimating the average AOT. Here, using AERONET data we show that systematic rejection of variable atmospheric optical conditions can generate such bias in the average AOT. Therefore we recommend (1) to introduce more powerful spectral variability cloud screening and (2) to change the philosophy behind present aerosol climatologies: Instead of systematically rejecting all cloud contaminations, we suggest to intentionally allow the presence of cloud contamination, estimate the statistical impact of the contamination and correct for it. The analysis, applied to 10 AERONET stations with approx. 4 years of data, shows almost no change for Rome (Italy), but up to a change in AOT of 0.12 in Beijing (PRC). Similar technique may be explored for satellite analysis, e.g. MODIS.

Kaufman, Yoram J.↗

NASA NTRS2007

A Database of Supercooled Large Droplet Ice Accretions

A unique, publicly available database regarding supercooled large droplet ice accretions has been developed in NASA Glenn's Icing Research Tunnel. Identical cloud and flight conditions were generated for five different airfoil models. The models chosen represent a variety of aircraft types from the horizontal stabilizer of a large trans-port aircraft to the wings of regional, business, and general aviation aircraft. In addition to the standard documentation methods of 2D ice shape tracing and imagery, ice mass measurements were also taken. This database will also be used to validate and verify the extension of the ice accretion code, LEWICE, into the SLD realm.

VanZante, Judith Foss↗

NASA NTRS2007

A Database of Supercooled Large Droplet Ice Accretions [Supplement]

A unique, publicly available database regarding supercooled large droplet (SLD) ice accretions has been developed in NASA Glenn's Icing Research Tunnel. Identical cloud and flight conditions were generated for five different airfoil models. The models chosen represent a variety of aircraft types from the horizontal stabilizer of a large transport aircraft to the wings of regional, business, and general aviation aircraft. In addition to the standard documentation methods of 2D ice shape tracing and imagery, ice mass measurements were also taken. This database will also be used to validate and verify the extension of the ice accretion code, LEWICE, into the SLD realm.

VanZante, Judith Foss↗