SEARCH · Search NASA

Results for “configurational complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS2015

Detached Eddy Simulation for the F-16XL Aircraft Configuration

Numerical simulations for the flow around the F-16XL configuration as a contribution to the Cranked Arrow Wing Aerodynamic Project International 2 (CAWAPI-2) have been performed. The NASA Langley Tetrahedral Unstructured Software System (TetrUSS) with its USM3D solver was used to perform the unsteady flow field simulations for the subsonic high angle-of-attack case corresponding to flight condition (FC) 25. Two approaches were utilized to capture the unsteady vortex flow over the wing of the F-16XL. The first approach was to use Unsteady Reynolds-Averaged Navier-Stokes (URANS) coupled with standard turbulence closure models. The second approach was to use Detached Eddy Simulation (DES), which creates a hybrid model that attempts to combine the most favorable elements of URANS models and Large Eddy Simulation (LES). Computed surface static pressure profiles are presented and compared with flight data. Time-averaged and instantaneous results obtained on coarse, medium and fine grids are compared with the flight data. The intent of this study is to demonstrate that the DES module within the USM3D solver can be used to provide valuable data in predicting vortex-flow physics on a complex configuration.

Elmiligui, Alaa↗

NASA NTRS1966

Chart system simplifies identification of complex design assemblies

Identification breakdown chart that lists the component parts required for any specific end item is used to identify rapidly and accurately, from numerous drawings, all the component parts of a complex design assembly. Cylindrical and complex configurations are depicted as continuous flat surfaces for ready identification.

Morin, H. P.↗

NASA NTRS1969

Automated plotting of equipotentials

By substitution of resistance paper for normal plotting paper, an x-y plotter can be used to draw automatically the equipotential lines between components represented in planar form on the paper. This technique is used for high voltage electronic components of complex configuration for the prediction of stress in the intervening insulation.

Bunker, E. R., Jr.↗

NASA NTRS1972

Space shuttle: Aerodynamic heating tests of the MDAC delta wing orbiter and canard booster

Design of an efficient thermal protection system for the space shuttle orbiter and booster is discussed, based on knowledge of the thermal environment to be experienced by the vehicles in all flight phases. The complex configurations of these vehicles limit the level of confidence which can be associated with purely analytical thermal environment predictions. Tests were conducted during April and May 1971 using an orbiter and booster model at a 96-in. hypersonic shock tunnel. Both models were tested separately as well as together. A sufficiently large range in Reynolds number was covered so that laminar, transitional, and turbulent data could be obtained.

Andresen, T. L.↗

NASA NTRS1974

Static, stability, and dynamic analysis of shells of revolution by numerical integration - A comparison

Recent innovations in digital computer technology have enabled engineers to analyze shell structures of complex configurations without unduly restrictive approximations. An attempt is made to compare the various programs now generally available from the point of view of the advantages of the relative technique utilized, as well as the programmed state of the art. Many of the comparisons are based on the sample problems solved by the STARS-2 system of programs. These examples indicate both the structural detail which can be analyzed by, and the analytical capabilities available in, the numerical shell-of-revolution programs. All advantages and differences are demonstrated by use of solutions for realistic shell problems in the areas of statics, stability, vibrations, and dynamic response of shells subjected to time-dependent loadings.

Svalbonas, V.↗

NASA NTRS1975

FCAP - A new tool for the evaluation of active control technology

A computer program has been developed for the evaluation of flight control systems designed for flexible aircraft. This Flight Control Analysis Program (FCAP) is designed in a modular fashion to incorporate sensor, actuator, and control logic element dynamics as well as aircraft dynamics and aerodynamics for complex configurations. Formulation of the total aircraft dynamic system is accomplished in matrix form by casting the equations in state vector format. The system stability and performance are determined in either the frequency or time domain using classical analysis techniques. The aerodynamic method used also permits evaluation of the flutter characteristics of the aircraft.

Noll, R. B.↗

NASA NTRS1975

Growth of metric noise continuum storms and its relation to the source of microwave S-emissions

The relationship between metric noise continuum storms and the S-component of solar microwave emissions is examined by considering the properties of a solar active region and its relation to LF radio burst emissions observed by IMP 6. It is noted that the development of radio noise continuum sources in metric frequencies or less is usually preceded by the appearance of an S-emission source, which is formed in complex sunspot groups such as beta-gamma and gamma types. A model for the development of radio noise continuum sources in metric and decametric frequencies is proposed in which the development of relationships between emissions is closely connected to the growth of magnetic-field lines above associated sunspot groups into complex configurations.

Sakurai, K.↗

NASA NTRS1976

Response analysis of flexible aircraft with active control

The small-perturbation equations of motion of a flexible aircraft with an active control technology (ACT) system are developed to evaluate the stability and performance of the controlled aircraft. The total aircraft system is formulated in state vector format and the system of equations is completed with fully unsteady and low-frequency aerodynamics for arbitrary, complex configurations based on a potential aerodynamic method. The ACT system equations are incorporated in the digital computer program FCAP (Flight Control Analysis Program) which can be used for the analysis of complete aircraft configurations, including control system, with either low-frequency or fully unsteady aerodynamics. The application of classical performance analyses including frequency response, poles and zeros, mean-square response, and time response in FCAP in state vector format is discussed.

Noll, R. B.↗

NASA NTRS1976

Performance analysis of flexible aircraft with active control

Small perturbation equations of motion of a flexible aircraft with an active control technology (ACT) system were developed to evaluate the stability and performance of the controlled aircraft. The total aircraft system was formulated in state vector format and the system of equations was completed with fully unsteady and low frequency aerodynamics for arbitrary, complex configurations based on a potential aerodynamic method. The ACT system equations were incorporated in the digital computer program FCAP (Flight Control Analysis Program) which can be used for the analysis of complete aircraft configurations, including control system, with either low frequency or fully unsteady aerodynamics. The application of classical performance analyses including frequency response, poles and zeros, mean square response, and time response in FCAP in state vector format was discussed.

Noll, R. B.↗

NASA NTRS1978

Computational requirements for three-dimensional flows

The computational requirements needed for predicting steady viscous flow over complex configurations are considered. The desired predictions must be made at reasonable expense, require a reasonable amount of storage space, and result in solutions that are sufficiently accurate. The data needed to estimate the cost of Navier-Stokes solutions is not available; therefore, experience with the solution of the three-dimensional boundary layers equations are used to illustrate the needed information and what can be expected for the Navier-Stokes solutions.

Blottner, F. G.↗

NASA NTRS1977

Numerical analysis of free vibrations of damped rotating structures

This paper is concerned with the efficient numerical solution of damped and undamped free vibration problems of rotating structures. While structural discretization is achieved by the finite element method, the associated eigenproblem solution is effected by a combined Sturm sequence and inverse iteration technique that enables the computation of a few required roots only without having to compute any other. For structures of complex configurations, a modal synthesis technique is also presented, which is based on appropriate combinations of eigenproblem solution of various structural components. Such numerical procedures are general in nature, which fully exploit matrix sparsity inherent in finite element discretizations, and prove to be most efficient for the vibration analysis of any damped rotating structure, such as rotating machineries, helicopter and turbine blades, spinning space stations, among others.

Gupta, K. K.↗

NASA NTRS1977

Early evolution of an X-ray emitting solar active region

The birth and early evolution of a solar active region has been investigated using X-ray observations from the mapping X-ray heliometer on board the OSO-8 spacecraft. X-ray emission is observed within three hours of the first detection of H-alpha plage. At that time, a plasma temperature of four million K in a region having a density on the order of 10 to the 10th power per cu cm is inferred. During the fifty hours following birth almost continuous flares or flare-like X-ray bursts are superimposed on a monotonically increasing base level of X-ray emission produced by the plasma. If the X-rays are assumed to result from heating due to dissipation of current systems or magnetic field reconnection, it may be concluded that flare-like X-ray emission soon after active region birth implies that the magnetic field probably emerges in a stressed or complex configuration.

Wolfson, C. J.↗

NASA NTRS1979

Numerical method for predicting flow characteristics and performance of nonaxisymmetric nozzles, theory

The theoretical foundation and formulation of a numerical method for predicting the viscous flowfield in and about isolated three dimensional nozzles of geometrically complex configuration are presented. High Reynolds number turbulent flows are of primary interest for any combination of subsonic, transonic, and supersonic flow conditions inside or outside the nozzle. An alternating-direction implicit (ADI) numerical technique is employed to integrate the unsteady Navier-Stokes equations until an asymptotic steady-state solution is reached. Boundary conditions are computed with an implicit technique compatible with the ADI technique employed at interior points of the flow region. The equations are formulated and solved in a boundary-conforming curvilinear coordinate system. The curvilinear coordinate system and computational grid is generated numerically as the solution to an elliptic boundary value problem. A method is developed that automatically adjusts the elliptic system so that the interior grid spacing is controlled directly by the a priori selection of the grid spacing on the boundaries of the flow region.

Thomas, P. D.↗

NASA NTRS1980

Inlet contour and flow effects on radiation

An experimental investigation of sound radiation from inlets with different contours with and without flow is being conducted to study the possibility of reducing noise radiated by aircraft engines. For each inlet configuration, complex directivity patterns and complex pressure reflection coefficients are measured as a function of a single space-time structure of the wave (up to a frequency of 4000Hz and an azimuthal wave number 6) and of flow velocity (up to Mach number 0.4) in a cylindrical duct located downstream the inlet. Experimental results of radiation from an unflanged duct are compared with theory. Effect of inlet contour and flow are deduced by comparing respectively unflanged duct and bellmouth measurements and, no flow and flow measurements with the bellmouth. Results are presented which indicate that the contour effect is significant near the cut-on frequency of a mode and emphasize the necessity for taking into account the inlet geometry in a radiation prediction. These results show also that internal flow has a weak effect on the amplitude of the directivity pattern

Ville, J. M.↗

NASA NTRS1982

Computational fluid dynamics - The coming revolution

The development of aerodynamic theory is traced from the days of Aristotle to the present, with the next stage in computational fluid dynamics dependent on superspeed computers for flow calculations. Additional attention is given to the history of numerical methods inherent in writing computer codes applicable to viscous and inviscid analyses for complex configurations. The advent of the superconducting Josephson junction is noted to place configurational demands on computer design to avoid limitations imposed by the speed of light, and a Japanese projection of a computer capable of several hundred billion operations/sec is mentioned. The NASA Numerical Aerodynamic Simulator is described, showing capabilities of a billion operations/sec with a memory of 240 million words using existing technology. Near-term advances in fluid dynamics are discussed.

Graves, R. A., Jr.↗

NASA NTRS1982

Nonlinear Green's function method for unsteady transonic flows

Advantages to employing Green's function in describing unsteady three-dimensional transonic flows are explored. The development of the function for application to linear subsonic and supersonic unsteady aerodynamics is reviewed. It is shown that unique solutions are possible for external flows, with all functional expressions being defined in Prandtl-Glauert space. The development of methods of using the Green's function for transonic flows is traced, noting the necessity of including the effects of significant nonlinear terms. The steady-state problem is considered to demonstrate the shock-capturing ability of the method and the usefulness of the function in the incompressible, subsonic, transonic, and supersonic areas of potential unsteady three-dimensional flows around complex configurations. Computational time is asserted to be an order of magnitude less than with finite difference methods.

Tseng, K.↗

NASA NTRS1983

Three-dimensional viscous-flow computations using a directionally hybrid implicit-explicit procedure

A new, directionally dependent, hybrid numerical algorithm for solving the unsteady, three-dimensional Navier-Stokes equations has been developed and used to compute the viscous supersonic flow over complex configurations, which may generate local regions of embedded subsonic or streamwise separated flows or both. The new hybrid implicit-explicit algorithm is derived from the more general implicit Beam-Warming algorithm and is particularly suitable for viscous computations in which the grid spacing in the direction outward from the body is considerably smaller than the spacing in the other two directions. Numerical results obtained from both the hybrid and implicit schemes are presented and compared on the basis of numerical stability, convergence history, and computer and core memory requirements.

Rizk, Y. M.↗

NASA NTRS1985

Developments in the simulation of compressible inviscid and viscous flow on supercomputers

In anticipation of future supercomputers, finite difference codes are rapidly being extended to simulate three-dimensional compressible flow about complex configurations. Some of these developments are reviewed. The importance of computational flow visualization and diagnostic methods to three-dimensional flow simulation is also briefly discussed.

Steger, J. L.↗