Search NASA⌕ Search

SEARCH · Search NASA

Results for “conical shocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Relaxation of the accelerating-gas boundary layer to the test-gas boundary layer on a flat plate in an expansion tube

An analytic investigation of the relaxation of the accelerating-gas boundary layer to the test-gas boundary layer over a flat plate mounted in an expansion tube has been conducted. In this treatment, nitrogen has been considered as the test gas and helium as the accelerating gas. The problem is analyzed in two conically similar limits: (1) when the time lag between the arrival of the shock and the interface at the leading edge of the plate is very large, and (2) when this time lag is negligible. The transient laminar boundary-layer equations of a perfect binary-gas mixture are taken as the flow governing equations. These coupled equations have been solved numerically by Gauss-Seidel line-relaxation method. The results predict the transient behavior as well as the time required for an all-helium accelerating-gas boundary layer to relax to an all-nitrogen boundary layer.

Gupta, R. N.↗
NASA NTRS1991

Comparison of hypersonic experiments and PNS predictions. I - Aerothermodynamics. II - Aerodynamics

A 3D parabolized Navier-Stokes (PNS) technique is examined in terms of applications to equilibrium-air and perfect-gas hypersonic flows at different Mach numbers and angles of attack. The method renders sublayer approximation unnecessary, and treats axis-normal coupling effects first followed by a shock solution and a corrector step. Predictions of hypersonic flowfields over several blunt conical configurations are found to agree with established wind-tunnel and flight data, although those for the Dhawan-Narasimha (1958) transition model vary from the experimental data. The PNS technique is also applied to predictions of wall-pressure distributions and force and moment data, and the results agree with experimental values. The PNS method allows the calculation of a wide variety of configurations with only a slight increase over traditional computing times.

Bhutta, Bilal A.↗
NASA NTRS1992

Quasiconical flowfield structure of the three-dimensional single fin interaction

A series of conical and three-dimensional computations have been performed for the swept oblique shock wave/turbulent boundary-layer interaction generated by a 20-deg sharp fin at Mach 4 and freestream Reynolds number of 2.18 x 10 exp 5 based on the incoming boundary-layer thickness. The Reynolds-averaged compressible Navier-Stokes equations are employed with turbulence incorporated using the Baldwin-Lomax and Jones-Launder models. The computed results are basically similar for both turbulence models and display general agreement with experimental data for surface pressure and surface flow direction, although underestimating the size of the primary vortex. The computed three-dimensional flowfield displays quasiconical behavior of the surface pressure, surface flow direction, and flowfield contours of static pressure, density, and Mach number over the extent of the computational domain except for an inception region near the fin leading edge. Certain features of the flowfield model are not observed in the computations, namely, a 'normal' shock near the attachment line, transonic shocklets in the expansion region, and secondary separation. The absence of these features in the computation is believed to be indirectly attributable to limitations in the turbulence models.

Knight, Doyle D.↗
NASA NTRS1989

Vibrational temperature from measurements of N2 and N2(+) shock layer radiation

Measurements of the vibrational temperature in a shock layer produced by a cylindrical blunt body in an arc jet nitrogen flow are made for both the neutral molecule and the molecular ion. Spectra were obtained at two locations in the shock layer produced by a 20-cm long cylindrical blunt body inserted in the arc jet conical flow. The technique used for determining the temperatures from the spectral radiation involves obtaining ratios of integrated intensities for certain spectral regions of the measured spectrum and making a comparison with computed ratios as a function of temperature for the same spectral regions. The technique is difficult to apply due to radiation overlapping bands from other species. However, using a trial and error procedure, the vibrational and rotational temperatures at the two locations are inferred. The results indicate that the shock layer is significantly out of thermal equilibrium.

Blackwell, Harvel E.↗
NASA NTRS1989

Inception length to a fully-developed fin-generated shock wave boundary-layer interaction

An experimental study of fin-generated shock wave turbulent boundary-layer interactions confirmed previous observations that, sufficiently far from the fin apex, such interactions become conical. The inception length to conical symmetry was found to increase weakly with Mach number for Mach numbers from 2.5 to 4 and fin angles from 4 to 22 deg. For the range of interactions examined, the inception length was found to depend primarily upon the inviscid shock angle, this angle ranging from 21 to 40 deg. The behavior of the inception length with shock angle can be broadly divided into two categories. For 'weak' interactions with shock angles less than about 35 deg, the inception length decreased as the shock angle increased. For 'strong' interactions with shock angles greater than about 35 deg, the inception region was small and was approximately constant at three boundary-layer thicknesses in length. In the latter, strong interaction case, the inception length was an order of magnitude smaller than that found in the weakest interactions examined, to the extent that strong interactions were practically fully-developed from the apex.

Lu, Frank K.↗
NASA NTRS1992

A database of aerothermal measurements in hypersonic flow for CFD validation

This paper presents an experimental database selected and compiled from aerothermal measurements obtained on basic model configurations on which fundamental flow phenomena could be most easily examined. The experimental studies were conducted in hypersonic flows in 48-inch, 96-inch, and 6-foot shock tunnels. A special computer program was constructed to provide easy access to the measurements in the database as well as the means to plot the measurements and compare them with imported data. The database contains tabulations of model configurations, freestream conditions, and measurements of heat transfer, pressure, and skin friction for each of the studies selected for inclusion. The first segment contains measurements in laminar flow emphasizing shock-wave boundary-layer interaction. In the second segment, measurements in transitional flows over flat plates and cones are given. The third segment comprises measurements in regions of shock-wave/turbulent-boundary-layer interactions. Studies of the effects of surface roughness of nosetips and conical afterbodies are presented in the fourth segment of the database. Detailed measurements in regions of shock/shock boundary layer interaction are contained in the fifth segment. Measurements in regions of wall jet and transpiration cooling are presented in the final two segments.

Holden, M. S.↗
NASA NTRS1984

The computation of rotational conical flows

A method based on the Clebsch velocity decomposition is presented to solve the steady, inviscid, supersonic flow field about arbitrary conical geometries. The system of equations developed, although formally equivalent to the Euler equations, retains the computational efficiency of type-dependent potential flow solutions. Accurate rotational-flow solutions are developed using shock-fitting procedures at the bow and imbedded waves along with special treatment of the vortical layer. Solutions are presented for several high Mach number conical flows and compared with existing Euler solutions and experimental data.

Grossman, B.↗
NASA NTRS1979

Internal corner flow fields

A computational procedure has been developed to predict the inviscid super/hypersonic flow field of conical internal corners. The prediction of internal corner flow fields can be important in the design of supersonic 'box' type inlets. The computational procedure utilizes a second order finite difference marching technique to asymptote to the conical corner flow solution of Euler's equations. These flow fields are dominated by complex shock interactions. All discontinuities, shocks and slip surfaces are fitted with the appropriate jump conditions. The 'triple' points (the interaction of two shocks and a slip surface) are also computed exactly. Computed results are compared with experimental data and the computational results of other investigators. In addition, the sensitivity of these flow fields to a number of geometric parameters is studied, and the impact of these flows on inlet performance is assessed.

Marconi, F.↗
NASA NTRS1990

Computational simulation of flows about hypersonic geometries with sharp leading edges

Hypersonic waverider design has become an important concern in the aerospace industry. As one part of an inverse design effort for waveriders, work has been done to apply existing Euler and Navier-Stokies flow solvers to hypersonic geometries with sharp leading edges. Previously, calculations were done on bodies with rounded leading edges or with conical solutions for the nose initial conditions. In this paper, solutions are computed about waveriders and conical shapes with sharp leading edges without resorting to either shortrcut. All solutions show attached shocks with fully supersonic flows at the nose and along the leading edges. Flows about several waverider shapes are shown, as well as a preliminary cone with inlet calculation to study the shock/inlet interaction.

Jones, Kevin D.↗
NASA NTRS1960

The Blunt Plate In Hypersonic Flow

The sonic-wedge characteristics method has been used to obtain the shock shapes and surface pressure distributions on several blunt two-dimensional shapes in a hypersonic stream for several values of the ratio of specific heats. These shapes include the blunt slab at angle of attack and power profiles of the form yb = a)P, where 0 les than m less than 1, Yb and x are coordinates of the body surface, and a is a constant. These numerical results have been compared with the results of blast-wave theory, and methods of predicting the pressure distributions and shock shapes are proposed in each case. The effects of a free-stream conical-flow gradient on the pressure distribution on a blunt slab in hypersonic flow were investigated by the sonic-wedge characteristics method and were found to be sizable in many cases. Procedures which are satisfactory for reducing pressure data obtained in conical flows with small gradients are presented.

Baradell, Donald L.↗
NASA NTRS1959

The Stabilizing Effectiveness of Conical Flares on Bodies with Conical Noses

An analysis is presented of published results of force tests on 80 cone-cylinder-flare configurations at Mach numbers of 2.18, 2.81, and 4.04. The contributions, excluding interference effects, of the cone-cylinder bodies to the over-all normal force derivatives have been removed by means of the second-order shock-expansion method, and the normal force derivatives at zero angle of attack due to the flares alone are shown. The results from a wide variety of configurations are correlated by plotting ratios of the normal force derivatives of the flares to the normal force derivatives of cones having the same included angle. Comparisons are made of the experimental normal force results with the normal force derivatives obtained by assuming conical flow over the flares and with those obtained by use of the second-order shock-expansion method. The comparisons show that use of the second-order shock-expansion method is generally the superior of the two, and in most cases gives values of the normal force derivatives of the flares which agree very well with the experimental results. Centers of pressure of the flares are presented and comparisons are made with results obtained from the theories mentioned. In general, the comparisons show that the assumption of conical flow over the flares is comparable to use of the second-order shock-expansion method in determining the centers of pressure, and in many cases both methods give values which agree closely with the experimental results.

Kirk, Donn B.↗
NASA NTRS1975

Computation of three-dimensional, inviscid supersonic flows

The paper sets forth in detail a method for the finite-difference computation of three-dimensional supersonic fields in an Eulerian mesh. First-, second-, and third-order finite difference schemes are examined. Attention is given to proper treatment of the impermeable and permeable boundaries encompassing the computational plane. Numerical results are presented for certain specific configurations: a conical wing-body combination, internal corner flow, a two-dimensional blunt body, an interfering shock problem, and three-dimensional inviscid supersonic flow past a shuttle-orbiter type vehicle.

Kutler, P.↗
NASA NTRS1973

A computer program for calculating the perfect gas inviscid flow field about blunt axisymmetric bodies at an angle of attack of 0 deg

A method for the rapid calculation of the inviscid shock layer about blunt axisymmetric bodies at an angle of attack of 0 deg has been developed. The procedure is of an inverse nature, that is, a shock wave is assumed and calculations proceed along rays normal to the shock. The solution is iterated until the given body is computed. The flow field solution procedure is programed at the Langley Research Center for the Control Data 6600 computer. The geometries specified in the program are sphores, ellipsoids, paraboloids, and hyperboloids which may conical afterbodies. The normal momentum equation is replaced with an approximate algebraic expression. This simplification significantly reduces machine computation time. Comparisons of the present results with shock shapes and surface pressure distributions obtained by the more exact methods indicate that the program provides reasonably accurate results for smooth bodies in axisymmetric flow. However, further research is required to establish the proper approximate form of the normal momentum equation for the two-dimensional case.

Zoby, E. V.↗
NASA NTRS1986

Application of NCOREL to conical multi-finned and multi-faceted configurations

A more versatile analytic conformal mapping approach for grid generation is implemented in a full potential supersonic flow code (NCOREL). Configurations such as multi-finned bodies and wings with vertical tails cannot be treated using a single conformal mapping transformation for grid generation. Instead, a series of analytic conformal mappings are used in progression to generate grids that are capable of resolving the complex multiple shock flow fields that exist about these configurations. Aplications of the grid generation techniques are presented for a variety of cross sections along with their conical full potential flow solutions.

Siclari, M. J.↗
NASA NTRS2010

Design of Modular, Shape-transitioning Inlets for a Conical Hypersonic Vehicle

For a hypersonic vehicle, propelled by scramjet engines, integration of the engines and airframe is highly desirable. Thus, the forward capture shape of the engine inlet should conform to the vehicle body shape. Furthermore, the use of modular engines places a constraint on the shape of the inlet sidewalls. Finally, one may desire a combustor cross- section shape that is different from that of the inlet. These shape constraints for the inlet can be accommodated by employing a streamline-tracing and lofting technique. This design technique was developed by Smart for inlets with a rectangular-to-elliptical shape transition. In this paper, we generalise that technique to produce inlets that conform to arbitrary shape requirements. As an example, we show the design of a body-integrated hypersonic inlet on a winged-cone vehicle, typical of what might be used in a three-stage orbital launch system. The special challenge of inlet design for this conical vehicle at an angle-of-attack is also discussed. That challenge is that the bow shock sits relatively close to the vehicle body.

Gollan, Rowan J.↗
NASA NTRS2014

Wind-US Results for the AIAA 2nd Propulsion Aerodynamics Workshop

This presentation contains Wind-US results presented at the 2nd Propulsion Aerodynamics Workshop. The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from government, industry, academia, and commercial software companies. Participants were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a 25deg conical nozzle for a range of nozzle pressure ratios between 1.4 and 7.0. Participants were also asked to simulate two cases in which the 25deg conical nozzle was bifurcated by a solid plate, resulting in vortex shedding (NPR=1.6) and shifted plume shock (NPR=4.0). A second set of nozzle cases involved computing the discharge and thrust coefficients for a convergent dual stream nozzle for a range of subsonic nozzle pressure ratios. The workshop committee also compared the plume mixing of these cases across various codes and models. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total pressure at downstream rake locations were examined.

Wind-US↗
NASA NTRS1975

Installation and airspeed effects on jet shock-associated noise

Experimental acoustic data are presented to illustrate, at model scale, the effect of varying the nozzle-wing installation on shock-associated noise, statically and with airspeed. The variation in installations included nozzle only, nozzle under-the-wing (with and without flaps deflected), and nozzle over-the-wing (unattached flow). The nozzles used were a conical and a 6-tube mixer nozzle with a cold-flow nozzle pressure ratio of 2.1. A 33-cm diameter free jet was used to simulate airspeed. With the nozzle only, shock wave noise dominated the spectra in the forward quadrant, while jet mixing noise dominated in the rearward quadrant. Similar trends were observed when a wing (flaps retracted) was included. Shock noise was attenuated with an over-the-wing configuration and increased with an under-the-wing configuration (due to reflection from the wing surface). With increasing flap deflection (under-the-wing configuration), the jet-flap interaction noise exceeded the shock noise and became dominant in both quadrants. The free jet results showed that airspeed had no effect on shock noise. The free jet noise data were corrected for convective amplification to approximate flight and comparisons between the various configurations are made.

Vonglahn, U.↗