SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Connector snap-locks over toothed bolthead mounted on column end, forming rigid joint that will not bend or twist. Connector is used in conventional construction to install temporary structures or as mechanical coupler. Up to nine receptacles can be clustered in one node to join up to nine converging columns.
Difficulties in joining tubular structural members made of composite materials are overcome by improved conectors. Connectors are made from same composite as structural shapes, eliminating stress and weight problems experienced with metal connectors. Composites allow joint strength to be optimized by properly choosing fiber orientation and fabric. Only two basic shapes are required to make 90 degrees and T-joints in plane. Used to assemble strong, lightweight, three-dimensional structures.
Test jig checks whether pins of connector are within location tolerance. Jig greatly reduces test time. Machined slots on opposite faces of plate form matrix of rectangular windows at intersections. If connector pin is out of alinement, it makes electrical contact with side of window, triggering indicator.
Connector lock resists vibration, automatically compensates for wear, and exhibits no backlash when parts are seated. Mechanism built into coupling nut on outer connector body. Outer collar turned clockwise to tighten treaded coupling nut, transmitting torque to coupling nut through six radially oriented pins.
Electromechanical interface transfers electric power, data and coolant from one system to another. Motor-actuated jackscrew moves connector on active half of interface to mating connector on passive half. Originally suggested for spacecraft, concept adaptable to underwater connections.
Fluid line connector for high pressure tests has split ferrule, nut, and O-ring seal. Following test, ferrule nut, and O-ring fitting are removed leaving line unaltered except for bushing braze to free end. Connector assures strong joint for high-pressure testing without redundant parts requiring postest debrazing.
Results of an investigation of the behavior of a bolted, flange type marine riser connector is reported. The method used to account for the nonlinear effect of connector separation due to bolt preload and axial tension load is described. The automated multilevel substructing capability of COSMIC/NASTRAN was employed at considerable savings in computer run time. Simplified formulas for computer resources, i.e., computer run times for modules SDCOMP, FBS, and MPYAD, as well as disk storage space, are presented. Actual run time data on a VAX-11/780 is compared with the formulas presented.
Concept for separating electrical connectors by remote control simple and reliable. Suitable for one-time, irreversible separations, method uses weak explosion to destroy one member of the connector.
Mating pair of insulators forces initial alinement of plug and socket. Male pins recessed behind one of alining insulators so they cannot touch female contacts alined. Contacts mate when coupling nut draws alined plug and socket together, depressing one of alining insulators against spring. Compressed spring provides tension on mated threads of assembly helping connector to resist loosening under vibration or shock. Arrangement prevents breakage or bending of male pins on conventional connectors when misalined contacts carelessly pressed together.
New right-angle connector between hose and "quick-disconnect" coupler smaller and simpler than its predecessor. Employs fewer parts and therefore cheaper and less likely to leak. Connector consists of only two major parts.
This invention relates to improvements in the method by which elongate frame elements such as the spars in aircraft wings are fastened to the skin panels covering same where these skin pane]s are of the sandwich type having inner and outer facesheets with a core bonded therebetween, such method consisting of preparing the panel to receive its frame elements by cutting elongate grooves spanwise through the inner facesheet and the core therebeneath while leaving the outer facesheet intact; bridging the gap thus produced in the inner facesheet with one bundle of filaments adhesively bonded thereto, the latter being contained in a woven connector in the form of a strap or band running lengthwise of the groove, and this filament bundle farming an endless strand of yarn that is laid back and forth transversely across the gap in side-by-side parallel rows but which are parted at intervals for the side-by-side lays of at least one other similar yarn strand to pass therebetween in intersecting relation; adhesive]y-bonding the skin panel core exposed within the groove to one or both sides of the frame element located proximal thereto using two endless strands of yarn laid back and forth to define a pair of intersecting webs arranged in spaced substantially parallel relation to one another that form a part of the connector and pass through the spaces between the first-mentioned yarn strands.
A slip joint connector for joining first and second structural elements together is presented. The connector has a first body member attachable to the first structural element and a second body member attachable to the second structural element. The first body member has a male protuberance including a conical portion and the second body member has a conical receptacle for cooperatively receiving the conical portion of the protuberance. The protuberance includes a bridging portion for spacing the conical portion from the remainder of the first body member and the second body member has a well communicating with the conical receptacle for receiving the bridging portion. The conical male portion internally carries a nut while the second body member may receive a bolt through the receptacle to be threadedly received by the nut to secure the first and second body members tightly together.
Report describes Connector Adapter Cable Information Data Base (CONNAID) computer program, managing data base containing necessary information concerning electrical connectors, breakout boxes, adapter cables, backshells, and pertinent torque specifications for engineering project.
Presented here is the second set of testing conducted by the Technology Validation Laboratory for Photonics at NASA Goddard Space Flight Center on the 12 optical fiber ribbon cable with MTP array connector for space flight environments. In the first set of testing the commercial 62.5/125 cable assembly was characterized using space flight parameters. The testing showed that the cable assembly would survive a typical space flight mission with the exception of a vacuum environment. Two enhancements were conducted to the existing technology to better suit the vacuum environment as well as the existing optoelectronics and increase the reliability of the assembly during vibration. The MTP assembly characterized here has a 100/140 optical commercial fiber and non outgassing connector and cable components. The characterization for this enhanced fiber optic cable assembly involved vibration, thermal and radiation testing. The data and results of this characterization study are presented which include optical in-situ testing.
In Stennis Space Center's Component Test Facility, piping lines carry rocket propellants and high pressure cryogenic fuels. When the lines are chilled to a pretest temperature of 400 degrees below zero, ordinary piping connectors can leak. Under contract to Stennis, Reflange, Inc. developed the T-Con connector, which included a secondary seal that tolerates severe temperature change. Because of the limited need for the large and expensive T-Con product, Reflange also developed the less costly E-Con, a smaller more compact design with the same technical advantages as the T-Con.
The U-shaped wire devices in the upper photo are Digi-Klipsm; aids to compact packaging of electrical and electronic devices. They serve as connectors linking the circuitry of one circuit board with another in multi-board systems. Digi-Klips were originally developed for Goddard Space Flight Center to meet a need for lightweight, reliable connectors to replace hand-wired connections formerly used in spacecraft. They are made of beryllium copper wire, noted for its excellent conductivity and its spring-like properties, which assure solid electrical contact over a long period of time.
An electrical connector in which conductive rubber rods are mounted in a metal substrate covered by a nonconductive layer. The rods extend above and below the upper and lower surfaces, respectively, of the substrate for electrically interconnecting conductive traces on a pair of electronic components. A method for making the connector is disclosed.
The development of a new ultrasonic measurement technique to quantitatively assess wire crimp connections is discussed. The amplitude change of a compressional ultrasonic wave propagating through the junction of a crimp connector and wire is shown to correlate with the results of a destructive pull test, which previously has been used to assess crimp wire junction quality. Various crimp junction pathologies (missing wire strands, incorrect wire gauge, incomplete wire insertion in connector) are ultrasonically tested, and their results are correlated with pull tests. Results show that the ultrasonic measurement technique consistently (as evidenced with pull-testing data) predicts good crimps when ultrasonic transmission is above a certain threshold amplitude level. A physics-based model, solved by finite element analysis, describes the compressional ultrasonic wave propagation through the junction during the crimping process. This model is in agreement within 6% of the ultrasonic measurements. A prototype instrument for applying the technique while wire crimps are installed is also presented.