Search NASA⌕ Search

SEARCH · Search NASA

Results for “correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Adjustment of footprint correction for airborne flux mapping over the FIFE site

A meaningful interpretation of airborne flux estimates over nonuniform terrain must consider local advection from nonhomogeneous source distributions (footprint correction). An empirical procedure for footprint correction of airborne flux data obtained in the First ISLSCP Field Experiment (FIFE) 1989 is presented, based on simple analytical solutions of the diffusion equation which have been adjusted to approximate more realistic solutions. Optimized estimates of surface flux 'maps' derived from airborne observations are then constructed for maximum correlation between flux estimates and independently observed surface characteristics. This paper also includes an analysis of resolution for the given procedure, in terms of amplitude recovery of hypothetical square-wave distributions of surface flux density, and discusses its implications for the interpretation of the optimized estimates of FIFE surface flux maps. Results show that corrected spatial sink distributions are obtained by the current empirical procedure at the cost of considerable reduction in amplitude recovery of small-scale variations in surface flux density. The high spatial correlation observed between corrected flux maps and surface characteristics such as greenness or surface temperature excess is ascribed to the approximately correct positioning of the main flux gradients across the site, which can be expected to have been reproduced with amplitude recovery equal to or greater than 60 percent.

Schuepp, P. H.↗
NASA NTRS1991

Comparison of three atmospheric correction models for a vegetated airborne visible/infrared imaging spectrometer (AVIRIS) scene

Current atmospheric correction models applied to imaging spectroscopy data include such methods as residual or scene average, flat field correction, regression method or empirical line algorithm, the continuum interpolated band ratio (CIBR) derivation and the LOWTRAN 7 method. Due to the limitations of using residual and flat field corrections on vegetated scenes, three methods will be compared: regression, CIBR derivation and LOWTRAN 7. Field-measured bright and dark targets taken at the time of the 13 April, 1989 AVIRIS overflight of Jasper Ridge, California were used to formulate the regression method atmospheric correction. Using this corrected scene as 'ground truth', the CIBR derivation and the LOWTRAN 7 method with both input models are compared on the vegetated Jasper Ridge scene. Although representing a qualitative approach, this is a first approximation and shows the need for more quantitative analysis.

Van Den Bosch, J. M.↗
NASA NTRS1990

Burst error correction extensions for large Reed Solomon codes

Reed Solomon codes are powerful error correcting codes that include some of the best random and burst correcting codes currently known. It is well known that an (n,k) Reed Solomon code can correct up to (n - k)/2 errors. Many applications utilizing Reed Solomon codes require corrections of errors consisting primarily of bursts. In this paper, it is shown that the burst correcting ability of Reed Solomon codes can be increased beyond (n - k)/2 with an acceptable probability of miscorrect.

Owsley, P.↗
NASA NTRS1992

A simple modern correctness condition for a space-based high-performance multiprocessor

A number of U.S. national programs, including space-based detection of ballistic missile launches, envisage putting significant computing power into space. Given sufficient progress in low-power VLSI, multichip-module packaging and liquid-cooling technologies, we will see design of high-performance multiprocessors for individual satellites. In very high speed implementations, performance depends critically on tolerating large latencies in interprocessor communication; without latency tolerance, performance is limited by the vastly differing time scales in processor and data-memory modules, including interconnect times. The modern approach to tolerating remote-communication cost in scalable, shared-memory multiprocessors is to use a multithreaded architecture, and alter the semantics of shared memory slightly, at the price of forcing the programmer either to reason about program correctness in a relaxed consistency model or to agree to program in a constrained style. The literature on multiprocessor correctness conditions has become increasingly complex, and sometimes confusing, which may hinder its practical application. We propose a simple modern correctness condition for a high-performance, shared-memory multiprocessor; the correctness condition is based on a simple interface between the multiprocessor architecture and a high-performance, shared-memory multiprocessor; the correctness condition is based on a simple interface between the multiprocessor architecture and the parallel programming system.

Probst, David K.↗
NASA NTRS1994

Direct and indirect methods for correcting the aerosol effect on remote sensing

Aspects of aerosol studies and remote sensing are reviewed. Aerosol scatters solar radiation before it reaches the surface and scatters and absorbs it again after it is reflected from the surface and before it reaches the satellite sensor. The effect is spectrally and spatially dependent. Therefore atmospheric aerosol (dust, smoke and air pollution particles) has a significant effect on remote sensing. Correction for the aerosol effect was never achieved on an operational basis though several case studies were demonstrated. Correction can be done in a direct way by deriving the aerosol loading from the image itself and correcting for it using the appropriate radiative transfer model or by an indirect way, by defining remote sensing functions that are less dependent on the aerosol loading. To some degree this was already achieved in global remote sensing of vegetation where a composite of several days of NDVI (Normalized Difference Vegetation Index) measurements, choosing the maximal value, was used instead of a single cloud screened value. The Atmospheric Resistant Vegetation Index (ARVI) introduced recently for the NASA Earth Observing System EOS-MODIS is the most appropriate example of indirect correction, where the index is defined in such a way that the atmospheric effect in the blue spectral channel cancels to a large degree the atmospheric in the red channel in computations of a vegetation index. Atmospheric corrections can also use aerosol climatology and ground based instrumentation.

Kaufman, Yoram J.↗
NASA NTRS1994

Data pre-processing: Stratospheric aerosol perturbing effect on the remote sensing of vegetation: Correction method for the composite NDVI after the Pinatubo eruption

An operational stratospheric correction scheme used after the Mount Pinatubo (Phillipines) eruption (Jun. 1991) is presented. The stratospheric aerosol distribution is assumed to be only variable with latitude. Each 9 days the latitudinal distribution of the optical thickness is computed by inverting radiances observed in the NOAA AVHRR channel 1 (0.63 micrometers) and channel 2 (0.83 micrometers) over the Pacific Ocean. This radiance data set is used to check the validity of model used for inversion by checking consistency of the optical thickness deduced from each channel as well as optical thickness deduced from different scattering angles. Using the optical thickness profile previously computed and radiative transfer code assuming Lambertian boundary condition, each pixel of channel 1 and 2 are corrected prior to computation of NDVI (Normalized Difference Vegetation Index). Comparison between corrected, non corrected, and years prior to Pinatubo eruption (1989 to 1990) NDVI composite, shows the necessity and the accuracy of the operational correction scheme.

Vermote, E.↗
NASA NTRS1994

Accuracy enhancements for overset grids using a defect correction approach

A defect-correction approach is investigated as a means of enhancing the accuracy of flow computations on overset grids. Typically, overset-grid techniques process and pass information only at grid boundaries. In the current approach, error corrections at all overlapped interior points are injected between grids by using a defect-correction scheme. In some cases this is found to enhance the overall accuracy of the overset-grid method. Locally refined overset grids can be used to provide an efficient solution-adaptation method. The defect correction can also be ultilized as an error-correction technique for a coarse grid by evaluating the residual using a fine base grid, but solving the implicit equations only on the coarse grid. Numerical examples include an accuracy and dissipation study of an unsteady decaying vortex flow, the flow over a NACA 0012 airfoil, and the flow over a mulit-element high-lift airfoil.

Rogers, Stuart E.↗
NASA NTRS1999

Solving Upwind-Biased Discretizations: Defect-Correction Iterations

This paper considers defect-correction solvers for a second order upwind-biased discretization of the 2D convection equation. The following important features are reported: (1) The asymptotic convergence rate is about 0.5 per defect-correction iteration. (2) If the operators involved in defect-correction iterations have different approximation order, then the initial convergence rates may be very slow. The number of iterations required to get into the asymptotic convergence regime might grow on fine grids as a negative power of h. In the case of a second order target operator and a first order driver operator, this number of iterations is roughly proportional to h-1/3. (3) If both the operators have the second approximation order, the defect-correction solver demonstrates the asymptotic convergence rate after three iterations at most. The same three iterations are required to converge algebraic error below the truncation error level. A novel comprehensive half-space Fourier mode analysis (which, by the way, can take into account the influence of discretized outflow boundary conditions as well) for the defect-correction method is developed. This analysis explains many phenomena observed in solving non-elliptic equations and provides a close prediction of the actual solution behavior. It predicts the convergence rate for each iteration and the asymptotic convergence rate. As a result of this analysis, a new very efficient adaptive multigrid algorithm solving the discrete problem to within a given accuracy is proposed. Numerical simulations confirm the accuracy of the analysis and the efficiency of the proposed algorithm. The results of the numerical tests are reported.

Diskin, Boris↗
NASA NTRS2001

Parameter Sensitivity Study of the Wall Interference Correction System (WICS)

An off-line version of the Wall Interference Correction System (WICS) has been implemented for the "NASA Langley National Transonic Facility. The correction capability is currently restricted to corrections for solid wall interference in the model pitch plane for Mach numbers, less than 0.45 due to a limitation in tunnel calibration data. A study to assess output sensitivity to the aerodynamic parameters of Reynolds number and Mach number was conducted on this code to further ensure quality during the correction process. In addition, this paper includes all investigation into possible correction due to a semispan test technique using a non metric standoff and all improvement to the standard data rejection algorithm.

Walker, Eric L.↗
NASA NTRS1995

BOREAS Aerosol Optical Depth Measurements and Atmospheric Correction

Aerosol optical depth measurements were conducted during all three Intensive Field Campaigns of BOREAS in 1994 by both groundbased and airborne tracking sun photometers. These measurements documented the highly variable aerosol loadings in the BOREAS study areas: very clear days with optical depths at 525 nm of 0.05 alternated with very hazy days (due to smoke from extensive western forest fires) with optical depths greater than 0.5. The airborne sun photometer showed the aerosol layer extended up to 3.5-4 km. Remote sensing missions were largely constrained to clear days, but some occurred under less optimum conditions. The spectral aerosol optical depths were used to derive aerosol size distributions and other aerosol optical properties useful for atmospheric correction of satellite and aircraft remote sensing imagery. Aerosol scattering phase functions and aerosol single scattering albedoes were calculated from Mie scattering theory using reasonable assumptions for the index of refraction for the aersols. Our atmospheric correction procedure Imagecor used the aerosol optical properties to derive surface radiances at each pixel from Landsat Thematic Mapper data of the southern study area on July 25, 1994. Similar efforts under FIFE showed close agreement between atmospherically corrected surface radiances and helicopter measurements of surface radiance of the same sites. Recently we incorporated calculations of the total downwelling irradiance from the 6S radiative transfer program (which vary little over the entire Landsat scene) to derive surface reflectances from the atmospherically corrected surface radiances. Tests using this procedure with both FIFE and HAPEX data sets show good agreement with ground-measured surface reflectances. Surface reflectances derived from the atmospherically corrected radiances of the July 25th Landsat scene will be compared to surface measurements made in BOREAS'southern study area.

Wrigley, R. C.↗
NASA NTRS2003

Sunlight Transmission through Desert Dust and Marine Aerosols: Diffuse Light Corrections to Sun Photometry and Pyrheliometry

Desert dust and marine aerosols are receiving increased scientific attention because of their prevalence on intercontinental scales and their potentially large effects on Earth radiation and climate, as well as on other aerosols, clouds, and precipitation. The relatively large size of desert dust and marine aerosols produces scattering phase functions that are strongly forward- peaked. Hence, Sun photometry and pyrheliometry of these aerosols are more subject to diffuse-light errors than is the case for smaller aerosols. Here we quantify these diffuse-light effects for common Sun photometer and pyrheliometer fields of view (FOV), using a data base on dust and marine aerosols derived from (1) AERONET measurements of sky radiance and solar beam transmission and (2) in situ measurements of aerosol layer size distribution and chemical composition. Accounting for particle non-sphericity is important when deriving dust size distribution from both AERONET and in situ aerodynamic measurements. We express our results in terms of correction factors that can be applied to Sun photometer and pyrheliometer measurements of aerosol optical depth (AOD). We find that the corrections are negligible (less than approximately 1% of AOD) for Sun photometers with narrow FOV (half-angle eta less than degree), but that they can be as large as 10% of AOD at 354 nm wavelength for Sun photometers with eta = 1.85 degrees. For pyrheliometers (which can have eta up to approximately 2.8 degrees), corrections can be as large as 16% at 354 nm. We find that AOD correction factors are well correlated with AOD wavelength dependence (hence Angstrom exponent). We provide best-fit equations for determining correction factors from Angstrom exponents of uncorrected AOD spectra, and we demonstrate their application to vertical profiles of multiwavelength AOD.

Russell, P. B.↗
NASA NTRS2005

Spaceborne Doppler Radar Measurements of Rainfall: Correction of Errors Induced by Pointing Uncertainties

In this paper a sea surface radar echo spectral analysis technique to correct for the rainfall velocity error caused by radar-pointing uncertainty is presented. The correction procedure is quite straightforward when the radar is observing a homogeneous rainfall field. When nonuniform beam filling (NUBF) occurs and attenuating frequencies are used, however, additional steps are necessary in order to correctly estimate the antenna-pointing direction. This new technique relies on the application of the combined frequency-time (CFT) algorithm to correct for uneven attenuation effects on the observed sea surface Doppler spectrum. The performance of this correction technique was evaluated by a Monte Carlo simulation of the Doppler precipitation radar backscatter from high-resolution 3D rain fields (either generated by a cloud resolving numerical model or retrieved from airborne radar measurements). The results show that the antenna-pointing-induced error can, indeed, be reduced by the proposed technique in order to achieve 1 m s(exp -1) accuracy on rainfall vertical velocity estimates.

remote sensing↗
NASA NTRS2007

Temperature-Corrected Model of Turbulence in Hot Jet Flows

An improved correction has been developed to increase the accuracy with which certain formulations of computational fluid dynamics predict mixing in shear layers of hot jet flows. The CFD formulations in question are those derived from the Reynolds-averaged Navier-Stokes equations closed by means of a two-equation model of turbulence, known as the k-epsilon model, wherein effects of turbulence are summarized by means of an eddy viscosity. The need for a correction arises because it is well known among specialists in CFD that two-equation turbulence models, which were developed and calibrated for room-temperature, low Mach-number, plane-mixing-layer flows, underpredict mixing in shear layers of hot jet flows. The present correction represents an attempt to account for increased mixing that takes place in jet flows characterized by high gradients of total temperature. This correction also incorporates a commonly accepted, previously developed correction for the effect of compressibility on mixing.

Abdol-Hamid, Khaled S.↗
NASA NTRS2010

VLBI2010 Imaging and Structure Corrections

Simulations show that the next generation VLBI system is generally well suited for imaging extragalactic radio sources. In addition to revealing the morphology of the sources, simulated VLBI2010 images may also be used to generate structure correction maps, which characterize the impact of source structure on the VLBI measurements. By comparing structure corrections for a set of simulated images based on Monte-Carlo generated visibilities with theoretical structure corrections derived from the model, we assess the accuracy of VLBI2010 structure corrections. In the most favorable case (32-station network, source at declination +40 deg.), statistics demonstrate that the structure corrections obtained from simulated images are statistically close to the theoretical model ones, which seems very promising for the VLBI2010 system.

Collioud, Arnaud↗
NASA NTRS2011

Convergence of Defect-Correction and Multigrid Iterations for Inviscid Flows

Convergence of multigrid and defect-correction iterations is comprehensively studied within different incompressible and compressible inviscid regimes on high-density grids. Good smoothing properties of the defect-correction relaxation have been shown using both a modified Fourier analysis and a more general idealized-coarse-grid analysis. Single-grid defect correction alone has some slowly converging iterations on grids of medium density. The convergence is especially slow for near-sonic flows and for very low compressible Mach numbers. Additionally, the fast asymptotic convergence seen on medium density grids deteriorates on high-density grids. Certain downstream-boundary modes are very slowly damped on high-density grids. Multigrid scheme accelerates convergence of the slow defect-correction iterations to the extent determined by the coarse-grid correction. The two-level asymptotic convergence rates are stable and significantly below one in most of the regions but slow convergence is noted for near-sonic and very low-Mach compressible flows. Multigrid solver has been applied to the NACA 0012 airfoil and to different flow regimes, such as near-tangency and stagnation. Certain convergence difficulties have been encountered within stagnation regions. Nonetheless, for the airfoil flow, with a sharp trailing-edge, residuals were fast converging for a subcritical flow on a sequence of grids. For supercritical flow, residuals converged slower on some intermediate grids than on the finest grid or the two coarsest grids.

Diskin, Boris↗
NASA NTRS2010

Evaluation of Shortwave Infrared Atmospheric Correction for Ocean Color Remote Sensing of Chesapeake Bay

The NASA Moderate Resolution Imaging Spectroradiometer onboard the Aqua platform (MODIS-Aqua) provides a viable data stream for operational water quality monitoring of Chesapeake Bay. Marine geophysical products from MODIS-Aqua depend on the efficacy of the atmospheric correction process, which can be problematic in coastal environments. The operational atmospheric correction algorithm for MODIS-Aqua requires an assumption of negligible near-infrared water-leaving radiance, nL(sub w)(NIR). This assumption progressively degrades with increasing turbidity and, as such, methods exist to account for non-negligible nL(sub w)(NIR) within the atmospheric correction process or to use alternate radiometric bands where the assumption is satisfied, such as those positioned within shortwave infrared (SWIR) region of the spectrum. We evaluated a decade-long time-series of nL(sub w)(lambda) from MODIS-Aqua in Chesapeake Bay derived using NIR and SWIR bands for atmospheric correction. Low signal-to-noise ratios (SNR) for the SWIR bands of MODIS-Aqua added noise errors to the derived radiances, which produced broad, flat frequency distributions of nL(sub w)(lambda) relative to those produced using the NIR bands. The SWIR approach produced an increased number of negative nL(sub w)(lambda) and decreased sample size relative to the NIR approach. Revised vicarious calibration and regional tuning of the scheme to switch between the NIR and SWIR approaches may improve retrievals in Chesapeake Bay, however, poor SNR values for the MODIS-Aqua SWIR bands remain the primary deficiency of the SWIR-based atmospheric correction approach.

Werdell, P. Jeremy↗
NASA NTRS2012

Assessment of a Bidirectional Reflectance Distribution Correction of Above-Water and Satellite Water-Leaving Radiance in Coastal Waters

Water-leaving radiances, retrieved from in situ or satellite measurements, need to be corrected for the bidirectional properties of the measured light in order to standardize the data and make them comparable with each other. The current operational algorithm for the correction of bidirectional effects from the satellite ocean color data is optimized for typical oceanic waters. However, versions of bidirectional reflectance correction algorithms specifically tuned for typical coastal waters and other case 2 conditions are particularly needed to improve the overall quality of those data. In order to analyze the bidirectional reflectance distribution function (BRDF) of case 2 waters, a dataset of typical remote sensing reflectances was generated through radiative transfer simulations for a large range of viewing and illumination geometries. Based on this simulated dataset, a case 2 water focused remote sensing reflectance model is proposed to correct above-water and satellite water-leaving radiance data for bidirectional effects. The proposed model is first validated with a one year time series of in situ above-water measurements acquired by collocated multispectral and hyperspectral radiometers, which have different viewing geometries installed at the Long Island Sound Coastal Observatory (LISCO). Match-ups and intercomparisons performed on these concurrent measurements show that the proposed algorithm outperforms the algorithm currently in use at all wavelengths, with average improvement of 2.4% over the spectral range. LISCO's time series data have also been used to evaluate improvements in match-up comparisons of Moderate Resolution Imaging Spectroradiometer satellite data when the proposed BRDF correction is used in lieu of the current algorithm. It is shown that the discrepancies between coincident in-situ sea-based and satellite data decreased by 3.15% with the use of the proposed algorithm.

LISCO(LONG ISLAND SOUND COASTAL OBSERVATORY)↗
NASA NTRS2012

Piezocomposite Actuator Arrays for Correcting and Controlling Wavefront Error in Reflectors

Three reflectors have been developed and tested to assess the performance of a distributed network of piezocomposite actuators for correcting thermal deformations and total wave-front error. The primary testbed article is an active composite reflector, composed of a spherically curved panel with a graphite face sheet and aluminum honeycomb core composite, and then augmented with a network of 90 distributed piezoelectric composite actuators. The piezoelectric actuator system may be used for correcting as-built residual shape errors, and for controlling low-order, thermally-induced quasi-static distortions of the panel. In this study, thermally-induced surface deformations of 1 to 5 microns were deliberately introduced onto the reflector, then measured using a speckle holography interferometer system. The reflector surface figure was subsequently corrected to a tolerance of 50 nm using the actuators embedded in the reflector's back face sheet. Two additional test articles were constructed: a borosilicate at window at 150 mm diameter with 18 actuators bonded to the back surface; and a direct metal laser sintered reflector with spherical curvature, 230 mm diameter, and 12 actuators bonded to the back surface. In the case of the glass reflector, absolute measurements were performed with an interferometer and the absolute surface was corrected. These test articles were evaluated to determine their absolute surface control capabilities, as well as to assess a multiphysics modeling effort developed under this program for the prediction of active reflector response. This paper will describe the design, construction, and testing of active reflector systems under thermal loads, and subsequent correction of surface shape via distributed peizeoelctric actuation.

piezoelectric actuation↗