Search NASA⌕ Search

SEARCH · Search NASA

Results for “damage threshold”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Modeling the effect of native and laser-induced states on the dielectric breakdown of wide band gap optical materials by multiple subpicosecond laser pulses

A model for the multiple-pulse laser-induced breakdown behavior of dielectrics is presented. It is based on a critical conduction band (CB) electron density leading to dielectric breakdown. The evolution of the CB electron density during the pulse train is calculated using rate equations involving transitions between band and mid-gap states (native and laser-induced). Using realistic estimations for the trap density and ionization cross-section, the model is able to reproduce the experimentally observed drop in the multiple-pulse damage threshold relative to the single-pulse value, as long as the CB electron density is controlled primarily by avalanche ionization seeded by multiphoton ionization of the traps and the valence band. The model shows that at long pulse duration, the breakdown threshold becomes more sensitive to presence of traps close (within one photon energy) to the CB. The effect of native and laser-induced defects can be distinguished by their saturation behavior. Finally, measurements of the multiple-pulse damage threshold of hafnium oxide films are used to illustrate the application of the model.

36 MATERIALS SCIENCE↗

Study of diamond film growth and properties

The objective was to study diamond film growth and its properties in order to enhance the laser damage threshold of substrate materials. Calculations were performed to evaluate laser induced thermal stress parameter, R(sub T) of diamond. It is found that diamond has several orders of magnitude higher in value for R(sub T) compared to other materials. Thus, the laser induced damage threshold (LIDT) of diamond is much higher. Diamond films were grown using a microwave plasma enhanced chemical vapor deposition (MPECVD) system at various conditions of gas composition, pressure, temperature, and substrate materials. A 0.5 percent CH4 in H2 at 20 torr were ideal conditions for growing of high quality diamond films on substrates maintained at 900 C. The diamond films were polycrystalline which were characterized by scanning electron microscopy (SEM) and Raman scattering spectroscopy. The top surface of the growing film is always rough due to the facets of polycrystalline film while the back surface of the film replicates the substrate surface. An analytical model based on two dimensional periodic heat flow was developed to calculate the effective in-plane (face parallel) diffusivity of a two layer system. The effective diffusivity of diamond/silicon samples was measured using a laser pulse technique. The thermal conductivity of the films was measured to be 13.5 W/cm K, which is better than that of a type Ia natural diamond. Laser induced damage experiments were performed on bare Si substrates, diamond film coated Si, and diamond film windows. Significant improvements in the LIDT were obtained for diamond film coated Si compared to the bare Si.

Albin, Sacharial↗

How reduced vacuum pumping capability in a coating chamber affects the laser damage resistance of HfO 2 /SiO 2 antireflection and high-reflection coatings

Here, optical coatings with the highest laser damage thresholds rely on clean conditions in the vacuum chamber during the coating deposition process. A low-base pressure in the coating chamber, as well as the ability of the vacuum system to maintain the required pressure during deposition, are important aspects of limiting the amount of defects in an optical coating that could induce laser damage. Our large optics coating chamber at Sandia National Laboratories normally relies on three cryo pumps to maintain low pressures for e-beam coating processes. However, on occasion, one or more of the cryo pumps have been out of commission. In light of this circumstance, we explored how deposition under compromised vacuum conditions resulting from the use of only one or two cryo pumps affects the laser-induced damage thresholds of optical coatings. The coatings of this study consist of HfO 2 and SiO 2 layer materials and include antireflection coatings for 527 nm at normal incidence and high-reflection coatings for 527 nm at 45-deg angle of incidence in P-polarization.

36 MATERIALS SCIENCE↗

Designing Damage-Resistant Multilayer Dielectric Gratings for Petawatt-Class Lasers

We have successfully developed high efficiency dielectric gratings for chirped pulse amplification (CPA) pulse compression with a focus on improving damage thresholds for high peak power. Specifically, we focused on developing first-of-kind designs that operate at TM polarization. Unpublished modeling within our group shows that the electric field enhancement in the solid material for gratings operating at TM can be significantly less than for TE. Subsequently, the laser damage threshold of TM gratings should be higher by potentially a factor of 2X.

42 ENGINEERING↗

How reduced vacuum pumping capability in a coating chamber affects the laser damage resistance of HfO 2 /SiO 2 antireflection and high reflection coatings.

Optical coatings with the highest laser damage thresholds rely on clean conditions in the vacuum chamber during the coating deposition process. A low base pressure in the coating chamber, as well as the ability of the vacuum system to maintain the required pressure during deposition, are important aspects of limiting the amount of defects in an optical coating that could induce laser damage. Our large optics coating chamber at Sandia National Laboratories normally relies on three cryo pumps to maintain low pressures for e-beam coating processes. However, on occasion, one or more of the cryo pumps have been out of commission. In light of this circumstance, we explored how deposition under compromised vacuum conditions resulting from the use of only one or two cryo pumps affects the laser-induced damage thresholds of optical coatings. Finally, the coatings of this study consist of HfO 2 and SiO 2 layer materials and include antireflection coatings for 527 nm at normal incidence, and high reflection coatings for 527 nm, 45⁰ angle of incidence (AOI), in P-polarization (P-pol).

Field, Ella Suzanne↗

Exploring Fabrication of Ultra-low Absorption, Multilayer, Hafnium High Reflectors

Ultra-low absorption, high damage threshold coatings are critical for the advancement of the high power CW laser technologies, and in most cases, are a limiting factor for the output power. Since high power CW laser systems enable extremely high power irradiances, when the light is incident on an HR mirror, part of the energy is absorbed and converted into heat, which can have many detrimental side effects. The worst-case scenarios are optical distortion and laser-induced damage. These optics must operate reliably with irradiances of 100's kW/cm 2 to MW/cm 2 . The highest pulsed laser damage threshold high reflectors are consistently fabricated with hafnia material. However, hafnia is not the material of choice for high power CW laser systems because of very high absorption and scatter properties, factors of >100x higher than tantala-silica, due to its poly crystalline nature. This study focuses on CW laser use applications, where the coatings’ laser damage resistance is largely limited by the inherent absorption of the coating materials. The goal is to study the feasibility of utilizing a “composite” hafnium-silica and a “doped” hafnia-silica target materials to prohibit crystallization. The results from the study were extremely successful. Hafnia high reflectors coatings generated from this study exhibited one micron absorption values of approximately 1 ppm, which are the lowest reported values to date.

36 MATERIALS SCIENCE↗

Ridge Waveguide Structures in Magnesium-Doped Lithium Niobate

This work proposes to establish the feasibility of fabricating isolated ridge waveguides in 5% MgO:LN. Ridge waveguides in MgO:LN will significantly improve power handling and conversion efficiency, increase photonic component integration, and be well suited to spacebased applications. The key innovation in this effort is to combine recently available large, high-photorefractive-damage-threshold, z-cut 5% MgO:LN with novel ridge fabrication techniques to achieve high-optical power, low-cost, high-volume manufacturing of frequency conversion structures. The proposed ridge waveguide structure should maintain the characteristics of the periodically poled bulk substrate, allowing for the efficient frequency conversion typical of waveguides and the high optical damage threshold and long lifetimes typical of the 5% doped bulk substrate. The low cost and large area of 5% MgO:LN wafers, and the improved performance of the proposed ridge waveguide structure, will enhance existing measurement capabilities as well as reduce the resources required to achieve high-performance specifications. The purpose of the ridge waveguides in MgO:LN is to provide platform technology that will improve optical power handling and conversion efficiency compared to existing waveguide technology. The proposed ridge waveguide is produced using standard microfabrication techniques. The approach is enabled by recent advances in inductively coupled plasma etchers and chemical mechanical planarization techniques. In conjunction with wafer bonding, this fabrication methodology can be used to create arbitrarily shaped waveguides allowing complex optical circuits to be engineered in nonlinear optical materials such as magnesium doped lithium niobate. Researchers here have identified NLO (nonlinear optical) ridge waveguide structures as having suitable value to be the leading frequency conversion structures. Its value is based on having the low-cost fabrication necessary to satisfy the challenging pricing requirements as well as achieve the power handling and other specifications in a suitably compact package.

Himmer, Phillip↗

Use of wire grid polarizers with liquid crystal display for large-volume stereolithography

Spatial light modulators that use liquid crystal devices (LCDs) to pattern ultraviolet light for vat polymerization suffer from a few limitations: limited range of wavelengths that can be patterned, low damage threshold for incoming light, and low efficiency of light transmission. A monochrome LCD can more efficiently transmit useful wavelengths of light for stereolithography (365–405 nm) than a color LCD, but it still contains two absorptive film polarizers that suffer from the aforementioned limitations. Wire grid polarizers reflect rather than absorb the blocked polarizations of light, resulting in a higher intensity damage threshold. They can also polarize lower wavelength light that is limited only by the wire pitch. In this work, this research investigates the effects of replacing an LCD’s film polarizers with wire grid polarizers to enable polarization and patterning of high intensity UV light, resulting in shorter curing times and the ability to print a wider range of stereolithography feedstocks.

42 ENGINEERING↗

Performance characterization of freeform finished surfaces of potassium dihydrogen phosphate using fluid jet polishing with a nonaqueous slurry

Abstract Potassium dihydrogen phosphate (KDP) and its deuterated analog (DKDP) are unique nonlinear optical materials for high power laser systems. They are used widely for frequency conversion and polarization control by virtue of the ability to grow optical-quality crystals at apertures suitable for fusion-class laser systems. Existing methods for freeform figuring of KDP/DKDP optics do not produce surfaces with sufficient laser-induced–damage thresholds (LIDT’s) for operation in the ultraviolet portion of high-peak-power laser systems. In this work, we investigate fluid jet polishing (FJP) using a nonaqueous slurry as a sub-aperture finishing method for producing freeform KDP surfaces. This method was used to selectively polish surface areas to different depths on the same substrate with removals ranging from 0.16 μm to 5.13 μm. The finished surfaces demonstrated a slight increase in roughness as the removal depth increased along with a small number of fracture pits. Laser damage testing with 351 nm, 1 ns pulses demonstrated excellent surface damage thresholds, with the highest values in areas devoid of fracture pits. This work demonstrates, for the first time, a method that enables fabrication of a waveplate that provides tailored polarization randomization that can be scaled to meter-sized optics. Furthermore, this method is based on FJP technology that incorporates a nonaqueous slurry specially designed for use with KDP. This novel nonaqueous FJP process can be also used for figuring other types of materials that exhibit similar challenging inherent properties such as softness, brittleness, water-solubility, and temperature sensitivity.

36 MATERIALS SCIENCE↗

High laser fluence ITO coatings utilizing a Fabry-Perot thin film filter to reduce effective absorption

Laser-induced damage threshold of transparent conductors, such as Indium Tin Oxide (ITO), is limited by their high optical absorption due to free carriers. However, the effective absorption of a transparent conductor thin film can be reduced by an order of magnitude, without changing the electrical characteristics of the film, when placed in a low electric field section of a multilayer coating. A Fabry-Perot thin film interference filter has both high transmittance and low electric field positions, so it is an ideal thin film structure for this application. Although Fabry-Perot interference filters are not known as particularly high laser-induced damage resistant coatings due to their resonant characteristics, a laser-induced damage threshold (LIDT) improvement of up to 8× was observed with this technique compared to single layer ITO coatings fabricated using either radio frequency magnetron sputtering or electron-beam deposition. Additionally, an approximately 4× LIDT improvement for a Fabry-Perot interference filter has been observed by the addition of ITO into the multilayer structure.

47 OTHER INSTRUMENTATION↗

The interaction of 193-nm excimer laser irradiation with single-crystal zinc oxide: Positive ion emission

We examine UV laser-induced ion emission from a wide bandgap semiconductor, single-crystal ZnO, at fluences well below both the damage threshold and plasma formation. At fluences below 200 mJ/cm{sup 2}, we observe only Zn{sup +}, and the Zn{sup +} intensity decreases monotonically during exposure. At higher fluences, after an initial decrease, the emission is sustained; in addition O{sup +} and O{sub 2}{sup +} are observed. We explain: how Zn ions of several eV in energy can be produced on the surface of a semiconductor, how sustained emission can be maintained, and the origin of an anomalous emission of slow Zn{sup +} ions -- the latter is shown to arise from photoionization of atomic Zn, also emitted by this radiation.

36 MATERIALS SCIENCE↗

X-ray diffraction gratings: Precise control of ultra-low blaze angle via anisotropic wet etching

Diffraction gratings are used from micron to nanometer wavelengths as dispersing elements in optical instruments. At shorter wavelengths, crystals can be used as diffracting elements, but due to the 3D nature of the interaction with light are wavelength selective rather than wavelength dispersing. There is an urgent need to extend grating technology into the x-ray domain of wavelengths from 1 to 0.1 nm, but this requires the use of gratings that have a faceted surface in which the facet angles are very small, typically less than 1°. Small facet angles are also required in the extreme ultra-violet and soft x-ray energy ranges in free electron laser applications, in order to reduce power density below a critical damage threshold. In this work, we demonstrate a technique based on anisotropic etching of silicon designed to produce very small angle facets with a high degree of perfection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hanging by a thread? Forests and drought

Trees are the living foundations on which most terrestrial biodiversity is built. Central to the success of trees are their woody bodies, which connect their elevated photosynthetic canopies with the essential belowground activities of water and nutrient acquisition. The slow construction of these carbon-dense, woody skeletons leads to a slow generation time, leaving trees and forests highly susceptible to rapid changes in climate. Other long-lived, sessile organisms such as corals appear to be poorly equipped to survive rapid changes, which raises questions about the vulnerability of contemporary forests to future climate change. The emerging view that, similar to corals, tree species have rather inflexible damage thresholds, particularly in terms of water stress, is especially concerning. This Review examines recent progress in our understanding of how the future looks for forests growing in a hotter and drier atmosphere.

Science & Technology - Other Topics↗

Crystal growth and anisotropic thermal properties of the nonlinear and polar oxide Cs{sub 2}TeW{sub 3}O{sub 12}

Large crystal of the nonlinear optical and polar oxide Cs{sub 2}TeW{sub 3}O{sub 12} with a size of 20×15×4 mm{sup 3} has been grown by the top-seeded solution growth (TSSG) method. This crystal can be thermally stable up to 808 °C and melts incongruently. It possesses a large transparent range of 0.415–5.250 μm. Thermal properties, including thermal expansion, specific heat, thermal diffusivity and thermal conductivity were investigated. The average linear thermal expansion coefficients were calculated based on the measurement in the temperature range of 30–390 °C. It exhibits strong anisotropic thermal expansion which was discussed according to the relationships between the structure and thermal properties. Furthermore, laser-induced damage threshold has been estimated to be 591.28 MW/cm{sup 2} with a laser wavelength of 1064 nm and pulse duration of 8 ns. - Graphical abstract: The crystallization region of Cs{sub 2}TeW{sub 3}O{sub 12} single-phase in the quasi-ternary Cs{sub 2}TeW{sub 3}O{sub 12}–TeO{sub 2}–Cs{sub 2}O system has been investigated. And Cs{sub 2}TeW{sub 3}O{sub 12} large crystal has been grown by the top-seeded solution growth method. - Highlights: • The crystallization region of Cs{sub 2}TeW{sub 3}O{sub 12} in Cs{sub 2}TeW{sub 3}O{sub 12}–TeO{sub 2}–Cs{sub 2}O system has been investigated. • Large Cs{sub 2}TeW{sub 3}O{sub 12} crystal has been grown. • Cs{sub 2}TeW{sub 3}O{sub 12} possesses a large transparent range of 0.415–5.250 μm. • Cs{sub 2}TeW{sub 3}O{sub 12} possesses large laser-induced damage threshold of 591.28 MW/cm{sup 2}. • Detialed thermal properties have been investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Studies on the synthesis, structure, growth and physical properties of an organic NLO crystal: 2-Amino-5-nitropyridinium Phenolsulfonate

Graphical abstract: 2-Amino-5-nitropyridinium Phenolsulfonate is identified as potential candidate for efficient frequency conversion. Highlights: Black-Right-Pointing-Pointer Single crystals of 2A5NPP have been grown from saturated solution. Black-Right-Pointing-Pointer The high resolution X-ray diffraction curve (DC) measurements substantiate the good quality of the crystals. Black-Right-Pointing-Pointer Powder test with Nd:YAG laser radiation shows a high second harmonic generation. Black-Right-Pointing-Pointer The high value of damage threshold is related to the specific heat of the crystal which is reasonably high. -- Abstract: A noncentrosymmetric crystal was prepared from 2-amino-5-nitropyridine (2A5NP) and p-Phenolsulfonic acid, which was designed for second harmonic generation. Good quality single crystals of 2-amino-5-nitropyridinium Phenolsulfonate (2A5NPP) were successfully grown by the slow evaporation method with dimensions 10 Multiplication-Sign 4 Multiplication-Sign 3 mm{sup 3}. The unit cell dimensions were determined from single crystal X-ray diffraction studies. The structural perfection of the grown crystals has been analyzed by high-resolution X-ray diffraction (HRXRD) rocking curve measurements. Fourier transform infrared (FTIR) spectral studies have been performed to identify the functional groups. The optical transmittance window and the lower cutoff wavelength of the 2A5NPP have been identified by UV-vis-NIR studies. Thermo gravimetric analysis (TGA) and differential thermal analysis (DTA) were used to study its thermal properties. Powder test with Nd:YAG laser radiation shows a high second harmonic generation. The laser induced surface damage threshold for the grown crystal was measured using Nd:YAG laser.

36 MATERIALS SCIENCE↗

Synthesis, structure, growth and physical properties of a novel organic NLO crystal: 1,3-Dimethylurea dimethylammonium picrate

Graphical abstract: 1,3-Dimethylurea dimethylammonium picrate is identified as potential candidate for efficient frequency conversion. Research highlights: {yields} A new organic crystal, 1,3-dimethylurea dimethylammonium picrate, crystal has been grown for the first time and reported. {yields} The structure is reported for the first time in the literature. {yields} The high resolution X-ray diffraction curve (DC) measurements substantiate the good quality of the crystals. {yields} Powder test with Nd:YAG laser radiation shows a high second harmonic generation. {yields} Single shot and multiple shot (50 pulses) surface laser damage thresholds are determined to be 0.42 GW/cm{sup 2} and 0.31 GW/cm{sup 2} at 532 nm laser radiation, respectively. -- Abstract: A novel noncentrosymmetric crystal was prepared from 1,3-dimethylurea dimethylammonium picrate, C{sub 11}H{sub 18}N{sub 6}O{sub 8} (DMUP), which was designed for second harmonic generation. DMUP crystals exist in noncentro symmetric space group Cmc2{sub 1} with unit cell dimensions a = 14.288(4) A, b = 17.023(5) A, c = 6.8268(13) A, {alpha} = {beta} = {gamma} = 90{sup o} and volume = 1660.5(8) A{sup 3}. The crystal structure of DMUP has been determined using single crystal X-ray diffraction studies. The single crystals of DMUP were successfully grown by the slow evaporation method with dimensions 10 mm x 4 mm x 3 mm using dimethylformamide as solvent. The structural perfection of the grown crystals has been analysed by High-resolution X-ray diffraction (HRXRD) rocking curve measurements. Powder test with Neodymium-doped Yttrium aluminum garnet (Nd:YAG) laser radiation shows a high second harmonic generation (SHG). The laser induced surface damage threshold for the grown crystal was measured using Nd:YAG laser.

36 MATERIALS SCIENCE↗

Development of a robust damage analysis scheme at the National Ignition Facility

The onset of laser-induced damage in optical materials is a limiting factor in the design and operation of most high-energy laser systems. As such, significant effort has been dedicated to developing laser damage testing protocols and procedures to inform laser system design and operating limits. These tests typically rely on multiple laser exposures for statistical validation. Historically, small beam single fluence (N / 1) or ramped fluence (R / 1) tests have been used to quantify the “laser-induced damage threshold” of a material. However, due to various distributions in damage precursor populations, the laser fluence at which damage occurs for a given sample varies with beam size and is therefore better described as the onset of observed damage for that testing geometry. In conclusion, we document the development of irradiation, measurement, and analysis methods for damage testing resulting in damage initiation density as a function of incident fluence or ρ(ϕ) which is suitable for both small and large beam area testing and more conducive to extrapolating from one to the other.

Beam diameter↗

Advanced Silicon Avalanche Photodiodes on NASA's Global Ecosystem Dynamics Investigation (GEDI) Mission

Silicon Avalanche Photodiodes (APDs) are used in NASA’s Global Ecosystem Dynamics Investigation (GEDI) which was launched in December 2018 and is currently measuring the Earth’s vegetation vertical structure from the International Space Station. The APDs were specially made for space lidar with a much lower hole-to-electron ionization coefficient ratio (k-factor ~0.008) than that of commercially available silicon APDs in order to reduce the APD excess noise from the randomness of the avalanche gain. A silicon heater resistor was used under the APD chip to heat the device up to 70°C and improve its quantum efficiency at 1064 nm laser wavelength while maintaining a low dark current such that the overall signal to noise ratio is improved. Special APD protection circuits were used to raise the overload damage threshold to prevent device damage from strong laser return by specular surfaces, such as still water bodies, and space radiation events. The APD and a hybrid transimpedance amplifier circuit were hermetically sealed in a package with a sufficiently low leak rate to ensure multi-year operation lifetime in space. The detector assemblies underwent a series of pre-launch tests per NASA Goddard Environmental Verification Standard for space qualification. They have performed exactly as expected with GEDI in orbit. A detailed description of the GEDI detector design, signal and noise model, and test results are presented in this paper.

Sun, Xiaoli↗