Search NASA⌕ Search

SEARCH · Search NASA

Results for “deep Gaussian processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

133 records · Page 8

SERENDIPITOUS DISCOVERY OF AN OVERDENSITY OF Ly{alpha} EMITTERS AT z {approx} 4.8 IN THE CL1604 SUPERCLUSTER FIELD

We present results of a spectroscopic search for Ly{alpha} emitters (LAEs) in the Cl1604 supercluster field using the extensive spectroscopic Keck/DEep Imaging Multi-Object Spectrograph database taken as part of the Observations of Redshift Evolution in Large-Scale Environments survey. A total of 12 slitmasks were observed and inspected in the Cl1604 field, spanning a survey volume of 1.365 x 10{sup 4} comoving Mpc{sup 3}. We find a total of 17 high-redshift (4.39 {<=} z {<=} 5.67) LAE candidates down to a limiting flux of 1.9 x 10{sup -18} erg s{sup -1} cm{sup -2} (L(Ly{alpha}) = 4.6 x 10{sup 41} erg s{sup -1} or {approx}0.1 L {sub *} at z {approx} 5), 13 of which we classify as high quality. The resulting LAE number density is nearly double that of LAEs found in the Subaru deep field at z {approx} 4.9 and nearly an order of magnitude higher than in other surveys of LAEs at similar redshifts, an excess that is essentially independent of LAE luminosity. We also report on the discovery of two possible LAE group structures at z {approx} 4.4 and z {approx} 4.8 and investigate the effects of cosmic variance of LAEs on our results. Fitting a simple truncated single Gaussian model to a composite spectrum of the 13 high-quality LAE candidates, we find a best-fit stellar velocity dispersion of 136 km s{sup -1}. Additionally, we see modest evidence of a second peak in the composite spectrum, possibly caused by galactic outflows, offset from the main velocity centroid of the LAE population by {approx}440 km s{sup -1} as well as evidence for a nontrivial Ly{alpha} escape fraction. We find an average star formation rate density (SFRD) of {approx}5 x 10{sup -3} M {sub sun} yr{sup -1} Mpc{sup -3} with moderate evidence for negative evolution in the SFRD from z {approx} 4.6 to z {approx} 5.7. By simulating the statistical flux loss due to our observational setup, we measure a best-fit luminosity function characterized by {phi}{sub *} L {sub *} = 2.2{sup +3.9} {sub -1.3} x 10{sup 39} erg s{sup -1} Mpc{sup -3} for {alpha} = -1.6, generally consistent with measurements from other surveys at similar epochs. Finally, we investigate any possible effects from weak or strong gravitational lensing induced by the foreground supercluster, finding that our LAE candidates are minimally affected by lensing processes.

99 GENERAL AND MISCELLANEOUS↗

Peri-Net-Pro: the neural processes with quantified uncertainty for crack patterns

Abstract This paper develops a deep learning tool based on neural processes (NPs) called the Peri-Net-Pro, to predict the crack patterns in a moving disk and classifies them according to the classification modes with quantified uncertainties. In particular, image classification and regression studies are conducted by means of convolutional neural networks (CNNs) and NPs. First, the amount and quality of the data are enhanced by using peridynamics to theoretically compensate for the problems of the finite element method (FEM) in generating crack pattern images. Second, case studies are conducted with the prototype microelastic brittle (PMB), linear peridynamic solid (LPS), and viscoelastic solid (VES) models obtained by using the peridynamic theory. The case studies are performed to classify the images by using CNNs and determine the suitability of the PMB, LBS, and VES models. Finally, a regression analysis is performed on the crack pattern images with NPs to predict the crack patterns. The regression analysis results confirm that the variance decreases when the number of epochs increases by using the NPs. The training results gradually improve, and the variance ranges decrease to less than 0.035. The main finding of this study is that the NPs enable accurate predictions, even with missing or insufficient training data. The results demonstrate that if the context points are set to the 10th, 100th, 300th, and 784th, the training information is deliberately omitted for the context points of the 10th, 100th, and 300th, and the predictions are different when the context points are significantly lower. However, the comparison of the results of the 100th and 784th context points shows that the predicted results are similar because of the Gaussian processes in the NPs. Therefore, if the NPs are employed for training, the missing information of the training data can be supplemented to predict the results.

Mathematics↗

Galaxy blending effects in deep imaging cosmic shear probes of cosmology

ABSTRACT Upcoming deep imaging surveys such as the Vera C. Rubin Observatory Legacy Survey of Space and Time will be confronted with challenges that come with increased depth. One of the leading systematic errors in deep surveys is the blending of objects due to higher surface density in the more crowded images; a considerable fraction of the galaxies which we hope to use for cosmology analyses will overlap each other on the observed sky. In order to investigate these challenges, we emulate blending in a mock catalogue consisting of galaxies at a depth equivalent to 1.3 yr of the full 10-yr Rubin Observatory that includes effects due to weak lensing, ground-based seeing, and the uncertainties due to extraction of catalogues from imaging data. The emulated catalogue indicates that approximately 12 per cent of the observed galaxies are ‘unrecognized’ blends that contain two or more objects but are detected as one. Using the positions and shears of half a billion distant galaxies, we compute shear–shear correlation functions after selecting tomographic samples in terms of both spectroscopic and photometric redshift bins. We examine the sensitivity of the cosmological parameter estimation to unrecognized blending employing both jackknife and analytical Gaussian covariance estimators. An ∼0.025 decrease in the derived structure growth parameter S8 = σ8(Ωm/0.3)0.5 is seen due to unrecognized blending in both tomographies with a slight additional bias for the photo-z-based tomography. This bias is greater than the 2σ statistical error in measuring S8.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantifying the effect of anode surface roughness on diagnostic x-ray spectra using Monte Carlo simulation

Purpose: The accurate prediction of x-ray spectra under typical conditions encountered in clinical x-ray examination procedures and the assessment of factors influencing them has been a long-standing goal of the diagnostic radiology and medical physics communities. In this work, the influence of anode surface roughness on diagnostic x-ray spectra is evaluated using MCNP4C-based Monte Carlo simulations. Methods: An image-based modeling method was used to create realistic models from surface-cracked anodes. An in-house computer program was written to model the geometric pattern of cracks and irregularities from digital images of focal track surface in order to define the modeled anodes into MCNP input file. To consider average roughness and mean crack depth into the models, the surface of anodes was characterized by scanning electron microscopy and surface profilometry. It was found that the average roughness (R{sub a}) in the most aged tube studied is about 50 {mu}m. The correctness of MCNP4C in simulating diagnostic x-ray spectra was thoroughly verified by calling its Gaussian energy broadening card and comparing the simulated spectra with experimentally measured ones. The assessment of anode roughness involved the comparison of simulated spectra in deteriorated anodes with those simulated in perfectly plain anodes considered as reference. From these comparisons, the variations in output intensity, half value layer (HVL), heel effect, and patient dose were studied. Results: An intensity loss of 4.5% and 16.8% was predicted for anodes aged by 5 and 50 {mu}m deep cracks (50 kVp, 6 deg. target angle, and 2.5 mm Al total filtration). The variations in HVL were not significant as the spectra were not hardened by more than 2.5%; however, the trend for this variation was to increase with roughness. By deploying several point detector tallies along the anode-cathode direction and averaging exposure over them, it was found that for a 6 deg. anode, roughened by 50 {mu}m deep cracks, the reduction in exposure is 14.9% and 13.1% for 70 and 120 kVp tube voltages, respectively. For the evaluation of patient dose, entrance skin radiation dose was calculated for typical chest x-ray examinations. It was shown that as anode roughness increases, patient entrance skin dose decreases averagely by a factor of 15%. Conclusions: It was concluded that the anode surface roughness can have a non-negligible effect on output spectra in aged x-ray imaging tubes and its impact should be carefully considered in diagnostic x-ray imaging modalities.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Learning effective stochastic differential equations from microscopic simulations: Linking stochastic numerics to deep learning

We identify effective stochastic differential equations (SDEs) for coarse observables of fine-grained particle- or agent-based simulations; these SDEs then provide useful coarse surrogate models of the fine scale dynamics. We approximate the drift and diffusivity functions in these effective SDEs through neural networks, which can be thought of as effective stochastic ResNets. The loss function is inspired by, and embodies, the structure of established stochastic numerical integrators (here, Euler–Maruyama and Milstein); our approximations can thus benefit from backward error analysis of these underlying numerical schemes. They also lend themselves naturally to “physics-informed” gray-box identification when approximate coarse models, such as mean field equations, are available. Existing numerical integration schemes for Langevin-type equations and for stochastic partial differential equations can also be used for training; we demonstrate this on a stochastically forced oscillator and the stochastic wave equation. Our approach does not require long trajectories, works on scattered snapshot data, and is designed to naturally handle different time steps per snapshot. We consider both the case where the coarse collective observables are known in advance, as well as the case where they must be found in a data-driven manner.

97 MATHEMATICS AND COMPUTING↗

A novel conditional generative model for efficient ensemble forecasts of state variables in large-scale geological carbon storage

Integrating monitoring data to efficiently update reservoir pressure and CO 2 plume distribution forecasts presents a significant challenge in geological carbon storage (GCS) applications. Inverse modeling techniques are commonly used to fuse observational data and refine reservoir model parameters, thereby improving state variable forecasts. However, these techniques often rely on linear or Gaussian assumptions, which can limit their effectiveness in accurately predicting state variables. Moreover, simulating large-scale three-dimensional (3D) GCS problems is computationally expensive, making iterative runs in inverse problems prohibitive. To address these challenges, we propose a conditional generative model utilizing the score-based diffusion method for real-time 3D pressure and saturation field distribution predictions. Our approach involves solving the score function with a mini-batch-based Monte Carlo estimator to generate labeled data. This data is subsequently employed to train a fully connected neural network, enabling it to learn the conditional sample generator within a supervised learning framework. This method enables the rapid generation of a large ensemble of predictions, facilitating comprehensive uncertainty quantification of state variables. Here we applied our method to forecast the dynamic 3D distributions of pressure and saturation fields over a 30-year injection period. The statistical assessment with low root mean square error (RMSE) values demonstrates that our method can accurately predict the spatiotemporal distributions of both pressure and saturation fields. Moreover, the developed conditional generative model shows high computational efficiency by generating 100 ensemble forecasts of 3D state variables in less than 10 min. The consistency between ensemble averages and ground truth values further illustrates the model’s capability to capture state variable dynamics during the CO 2 plume injection process. Notably, the ground truth values fall within the ensemble forecasts, indicating that our uncertainty quantification effectively captures variability and potential noise in the observations. Thus, the developed conditional generative model proves to be a more efficient, accurate, and practical tool for GCS applications, facilitating timely risk analysis and informed decision-making.

58 GEOSCIENCES↗

Pulsed Thermal Tomography Nondestructive Examination of Additively Manufactured Reactor Materials and Components (Final Technical Report)

Metal Additive Manufacturing (AM) is a promising method for cost-efficient fabrication of complex shape structures for applications in harsh environment, such as in a nuclear reactor. However, internal defects (pores) occur in high-strength AM alloys, which are manufactured with Laser Powder Bed Fusion (LPBF) AM method. Pulsed Infrared Thermography (PIT) is an efficient nondestructive evaluation (NDE) method to examine actual structures, because this method offers one-sided non-contact measurements, and fast processing of large sample areas. However, imaging of material defects, particularly defects with sizes at microscopic level, is challenging. In this report, we benchmark the performance of several Unsupervised Learning (UL) algorithms designed to enhance imaging of microscopic defects in metals with PIT. UL aims to learn the latent principal patterns (dictionaries) in PIT data to detect defects with minimal human supervision. Performance of Independent Component Analysis (ICA), Sparse Coding (SC), Principal Component Analysis (PCA) and Exploratory Factor Analysis (EFA) was compared using F-score, UL model training time and defects reconstruction time. We obtained the average F-score of 0.75, and a highest F-score of 0.89 for the EFA algorithm. Overall, EFA outperforms other UL algorithms considered in this study. In another approach, we investigate Thermal Tomography (TT), which is a computational method for reconstruction of depth profile of internal material defects from PIT nondestructive evaluation (NDE). TT algorithm obtains depth reconstructions of thermal effusivity, which has been shown to provide visualization of subsurface internals defects in metals. In many applications, one needs to determine the defect shape and orientation from reconstructed effusivity images. Interpretation of TT images is non-trivial because of blurring, which increases with depth due to heat diffusion-based nature of image formation. We have developed a deep learning convolutional neural network (CNN) to classify size and orientation of subsurface material defects in TT images. CNN was trained with TT images produced with computer simulations of 2D metallic structures (thin plates) containing elliptical subsurface voids. Performance of CNN was investigated using test TT images developed with computer simulations of plates containing elliptical defects, and defects with shape imported from scanning electron microscopy (SEM) images. CNN demonstrated the ability to classify radii and angular orientation of elliptical defects in previously unseen test TT images. We have also demonstrated that CNN trained on TT images of elliptical defects is capable of classifying shape and orientation of irregular defects. Training the CNN on irregular defect shapes instead of on elliptical shapes would make the resulting classifications more descriptive of actual defect shapes. However, this requires a much higher volume of SEM images of material defects, which are difficult to obtain because of random occurrence of defects in LPBF. To address this challenge, we developed a generative adversarial network (GAN) to augment the existing dataset of SEM defect images. The GAN model is demonstrated to create novel yet realistic defect shapes that can be used as input for simulated PTT images to train CNN. We also investigate several approaches based on Gaussian Random Circle and Bezier Curves for constructing parametric models of irregular-shape defects.

36 MATERIALS SCIENCE↗