SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A procedure was developed to generate point spread functions for a segmented mirror system for a deployable reflector for submillimeter astronomy. These point spread functions were generated using ACCOS V and special purpose software. This procedure allows tilt and piston sensitivities to be evaluated. Point spread functions with tilt and piston errors are discussed.
The design and performance of satellite phased-array systems are examined by considering several specific antennas built for spacecraft use. Particular consideration is given to: (1) the JARED (Jammer Reduction Antenna System) antenna, and adaptive phased array which can be used to null jammer signals while providing coverage to specific user areas; (2) the algorithm used in the JARED antenna; and (3) a technique that can be used to detect and locate jammers. The antennas used by the Tracking and Data Relay Satellite System (TDRSS) are then described. A significant aspect of the TDRSS is the multiple access antenna which is a 30-element phased array, providing a single steered beam on transmit and the ability to receive data from 20 simultaneous users. Also included on the TDRSS is a mesh deployable reflector and a C-band and K-band communications system.
It is pointed out that magnetic refrigeration can provide additional cooling for infrared detectors on space missions, taking into account the Shuttle Infrared Telescope Facility (SIRTF) and the Large Deployable Reflector (LDR). From a temperature of 2 K provided by the primary cryogens, magnetic refrigerators could cool bolometers or pumped photoconductors to 0.1 K or below. Such a reduction in operating temperature would increase the sensitivity for bolometers, while the response at longer wavelengths for pumped photoconductors would be improved. Two types of magnetic refrigeration cycles have been proposed. One type uses a complete demagnetization. The present investigation is concerned with the second type, which uses a feedback-controlled isothermal demagnetization, taking into account the temperature stability limits. Attention is given to control system resolution, thermometer noise, reaction time, and thermal time constants.
The conduction of future space missions will require the long term storage of cryogens in space. Such missions will be performed in connection with the employment of the long life version of the Shuttle Infrared Telescope Facility (SIRTF), the Large Deployable Reflector (LDR), Gravity Probe B (GPB), Orbital Transfer Vehicles (OTVs), and the Space Station. The feasibility of building a long lifetime helium Dewar for space applications has been studied. A feasible concept was to be developed for a Shuttle-launchable 3-yr lifetime Dewar. The developed concept was to be used for the identification of key technology development areas. The desired long lifetime requires the minimization of the parasitic heat loads. It has been found that the majority of the parasitic heat load can be provided by the fiberglass-epoxy tension band supports. A new type of support system, the Passive Orbital Disconnect Strut (PODS), was developed to reduce the considered contribution to the heat load.
The ability to resupply scientific instruments in orbit with liquid helium would greatly enhance several planned missions. These missions include the SIRTF (Space Infrared Telescope Facility), the LDR (Large Deployable Reflector), the GP-B (Gravity Probe - B), and include individual instruments on the HST (Hubble Space Telescope), and on the AXAF (Advanced X-ray Astrophysics Facility). Resupply in orbit would extend the lifetimes of these missions without the difficulties, the delays, and the costs that are associated with retrieving the system, resupplying these systems on the ground, and relaunching. This is especially true of systems, such as the LDR, that are assembled in space and thus would be difficult to return to earth. This paper presents a conceptual design of a Helium Resupply System (HERS) and a discussion of the transfer efficiency.
A study was carried out to determine the feasibility, with current technology, of performing aperture synthesis using two telescopes orbiting the earth in coordinated orbits separated by approximately 10 m to 1 km. The objective was to determine whether there is a practical alternative to a very large, deployed, servo-controlled submillimeter telescope (i.e., the Large Deployable Reflector) for obtaining high-resolution submillimeter images of astronomical sources. It is found that suitable classes of orbits exist which can provide good UV coverage over the entire sky and the real-time correlation of wideband signals can be performed in orbit using current technology. The most difficult task appears to be the real-time determination of the orientation of the baseline vector in a stable coordinate system. A plausible scheme has been identified for the determination of an arbitrary direction to within 0.003 arcsec in an astrometric coordinate system. This scheme not only makes submillimeter interferometric image reconstruction possible but should also have numerous other applications.
The present conference is concerned with space-based observatories (including future systems), interplanetary observation platforms, Space Station optical utilization, orbital earth viewing systems, and Spacelab's use as an observations platform. Attention is given to the pointing system for the Space Telescope, the Advanced X-ray Astrophysics Facility, the conceptual definition of the Space IR Telescope Facility's spacecraft, satellite servicing in light of the Solar Maximum Repair Mission, a large deployable reflector telescope concept, moon-based astronomical observatories, Space Station-based remote sensing of the earth, optical systems is geosynchronous orbit, multispectral linear array detector technology, Spacelab-based space plasma and materials processing investigations, and space construction technology for large space observatories. Also discussed are military optical platforms for sea, land and air stationing.
The Hubble Space Telescope uses a primary mirror having an area of 5 sq m. The mirrors needed for two possible future telescopes, 50 sq m and 500 sq m in area, are considered. The former would be an 8-m diameter monolithic mirror of 'zero-expansion' glass, and would be diffraction-limited at optical wavelengths (0.015 arcsecond images). The 500 sq m mirror, the area proposed for the Large Deployable Reflector, would be diffraction-limited down to 30-micron wavelength (0.3 arcsecond images). Both types of mirror could be of honeycomb sandwich construction made by a new 'air inflation' method. The larger reflector would consist of ultralightweight glass panels.
Missions selected by NASA as representative of the most critical technology issues are described and the key technology requirements are discussed. The following are considered: (1) the Large Deployable Reflector (LDR), (2) the Sample Return Missions (SRM), (3) the Earth Observing System (EOS), and (4) the Geostationary Communications Platform (GCP). The LDR, designed for infrared and submillimeter astronomical measurements, will contain the following components for its instruments: indium antimonide charge-coupled arrays, extrinsic photodetector arrays, and heterodyne photoconductors. New technology developed for SRM includes an X-band transponder, a fiber-optic rotation sensor, and long-life batteries. The EOS will consist of instruments designed to measure the earth's atmosphere, interior, and surface, as well as an information system to support scientific research. Inherent in the platform of the GCP is the ability to effectively utilize both the geostationary arc and the electromagnetic spectrum; the GCP can also reduce overall satellite communications system costs.
Exit pupil correction of the Large Deployable Reflector's (a proposed IR to sub-mm space telescope) segmented primary can be done by reimaging it onto a like segmented surface at the exit pupil. This allows the primary to be more flexible, the adaptive element to be smaller, and the supporting structure to be cheaper than if all correction were performed at a stiffly supported primary. Piston, tilt, and decenter errors of an annulus of the primary and the equations for the required corrections are considered. To verify these, the perturbations with spline functions in the lens design program are simulated. Strehl ratios used to measure image quality show that a piston error of 1 mm is fully corrected over a 5 arcmin field for an f/10 system with a 0.7 n.a. primary at 30 micrometers. Limits of correction are also shown for tilt and decenter errors of segments. Tolerances are given for tilt and decenter errors of the remaining optics also.
A number of space flight experiments and entire facilities require superfluid helium as a coolant. Among these are the Space Infrared Telescope Facility (SIRTF), the Large Deployable Reflector (LDR), the Advanced X-ray Astrophysics Facility (AXAF), the Particle Astrophysics Magnet Facility (PAMF or Astromag), and perhaps even a future Hubble Space Telescope (HST) instrument. Because these systems are required to have long operational lifetimes, a means to replenish the liquid helium, which is exhausted in the cooling process, is required. The most efficient method of replenishment is to refill the helium dewars on orbit with superfluid helium (liquid helium below 2.17 Kelvin). To develop and prove the technology required for this liquid helium refill, a program of ground and flight testing was begun. The flight demonstration is baselined as a two flight program. The first, described in this paper, will prove the concepts involved at both the component and system level. The second flight will demonstrate active astronaut involvement and semi-automated operation. The current target date for the first launch is early 1991.
Numerous space applications of the future will require mesh deployable antennas of 15 m in diameter or greater for frequencies up to 20 GHz. These applications include mobile communications satellites, orbiting very long baseline interferometry (VLBI) astrophysics missions, and Earth remote sensing missions. A Lockheed wrap rip antennas was used as the test article. The experiments covered a broad range of structural, control, and RF discipline objectives, which is fulfilled in total, would greatly reduce the risk of employing these antenna systems in future space applications. It was concluded that a flight experiment of a relatively large mesh deployable reflector is achievable with no major technological or cost drivers. The test articles and the instrumentation are all within the state of the art and in most cases rely on proven flight hardware. Every effort was made to design the experiments for low cost.
A simple thermodynamic model of a transfer system for resupplying liquid helium in space is presented, with application to NASA projects including the Space Infrared Telescope Facility, the Large Deployable Reflector, and the Hubble Space Telescope. The relations between different thermodynamic regimes that can be expected in the transfer line are used to study the relative efficiencies of various possible transfer techniques. Low heat leak into the transfer line, particularly at point sources such as the coupling, is necesssary for efficient transfer of liquid helium, and proper selection of supply tank temperature is important during helium resupply.
A two-step approach to wavefront sensing for the Large Deployable Reflector (LDR) was examined as part of an effort to define wavefront-sensing requirements and to determine particular areas for more detailed study. A Hartmann test for coarse alignment, particularly segment tilt, seems feasible if LDR can operate at 5 microns or less. The direct measurement of the point spread function in the diffraction limited region may be a way to determine piston error, but this can only be answered by a detailed software model of the optical system. The question of suitable astronomical sources for either test must also be addressed.
The scientific objectives, engineering analysis and design, results of technology development, and focal-plane instrumentation for a two-meter balloon-borne telescope for far-infrared and submillimeter astronomy are presented. The unique capabilities of balloon-borne observations are discussed. A program summary emphasizes the development of the two-meter design. The relationship of the Large Deployable Reflector (LDR) is also discussed. Detailed treatment is given to scientific objectives, gondola design, the mirror development program, experiment accommodations, ground support equipment requirements, NSBF design drivers and payload support requirements, the implementation phase summary development plan, and a comparison of three-meter and two-meter gondola concepts.
A number of optical design and technology challenges are discussed with reference to specific space optics projects. The projects examined include the Large Deployable Reflector, multiple-mirror telescopes, the Hubble Space Telescope, and the Circumstellar Imaging Telescope. Other projects discussed include a voyage to a distance of 1000 astronomical units, the Shuttle Imaging Spectrometer Experiment, and directional optical systems. The ultimate challenge is the detection of and communication with any planets that may be discovered around nearby stars.
The fundamental principles of the adaptive structures concept and its applications to current and planned space missions are reviewed and illustrated with diagrams, drawings, graphs, and photographs. An adaptive structure is defined as one which can be modified to meet mission requirements, either by remote commands or automatically in response to external stimuli. Topics addressed include the need for adaptive structures, analytical models, ground testing, sensor/actuator-structure interactions, structural concepts, active damping, wave propagation in large structures, the selection of active member locations, and on-orbit system identification. Particular attention is given to adaptive structures being developed for the NASA Large Deployable Reflector and Optical Interferometer projects.
The conclusions and recommendations of the workshop held to study technology development issues critical to the Large Deployable Reflector (LDR) are summarized. LDR is to be a dedicated, orbiting, astronomical observatory, operating at wavelengths from 30 to 1000 microns, a spectral region where the Earth's atmosphere is almost completely opaque. Because it will have a large, segmented, passively cooled aperture, LDR addresses a wide range of technology areas. These include lightweight, low cost, structural composite reflector panels, primary support structures, wavefront sensing and adaptive optics, thermal background management, and integrated vibration and pointing control systems. The science objectives for LDR present instrument development challenges for coherent and direct arrayed detectors which can operate effectively at far infrared and submillimeter wavelengths, and for sub-Kelvin cryogenic systems.