Search NASA⌕ Search

SEARCH · Search NASA

Results for “dual numbers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗

Learning-Accelerated ADMM for Distributed DC Optimal Power Flow

We propose a novel data-driven method to accelerate the convergence of Alternating Direction Method of Multipliers (ADMM) for solving distributed DC optimal power flow (DC-OPF) where lines are shared between independent network partitions. Using previous observations of ADMM trajectories for a given system under varying load, the method trains a recurrent neural network (RNN) to predict the converged values of dual and consensus variables. Given a new realization of system load, a small number of initial ADMM iterations is taken as input to infer the converged values and directly inject them into the iteration. We empirically demonstrate that the online injection of these values into the ADMM iteration accelerates convergence by a significant factor for partitioned 14-, 118- and 2848-bus test systems under differing load scenarios. The proposed method has several advantages: it maintains the security of private decision variables inherent in consensus ADMM; inference is fast and so may be used in online settings; RNN-generated predictions can dramatically improve time to convergence but, by construction, can never result in infeasible ADMM subproblems; it can be easily integrated into existing software implementations. While we focus on the ADMM formulation of distributed DC-OPF in this paper, the ideas presented are naturally extended to other distributed optimization problems.

alternating direction method of multipliers↗

Experimental Investigation of a Large-Scale Low-Boom Inlet Concept

A large-scale low-boom inlet concept was tested in the NASA Glenn Research Center 8- x 6- foot Supersonic Wind Tunnel. The purpose of this test was to assess inlet performance, stability and operability at various Mach numbers and angles of attack. During this effort, two models were tested: a dual stream inlet designed to mimic potential aircraft flight hardware integrating a high-flow bypass stream; and a single stream inlet designed to study a configuration with a zero-degree external cowl angle and to permit surface visualization of the vortex generator flow on the internal centerbody surface. During the course of the test, the low-boom inlet concept was demonstrated to have high recovery, excellent buzz margin, and high operability. This paper will provide an overview of the setup, show a brief comparison of the dual stream and single stream inlet results, and examine the dual stream inlet characteristics.

Hirt, Stefanie M.↗

High-order accurate finite difference discretisations on fully unstructured dual quadrilateral meshes

Here, we present a novel approach for high-order accurate numerical differentiation on unstructured meshes of quadrilateral elements. To differentiate a given function, an auxiliary function with greater smoothness properties is defined which when differentiated provides the derivatives of the original function. The method generalises traditional finite difference methods to meshes of arbitrary topology in any number of dimensions for any order of derivative and accuracy. We demonstrate the accuracy of the numerical scheme using dual quadrilateral meshes and a refinement method based on subdivision surfaces. The scheme is applied to the solution of a range of partial differential equations, including both linear and nonlinear, second and fourth order equations, and a time-dependent first order equation.

97 MATHEMATICS AND COMPUTING↗

System-Independent X-Ray Characterization

We have developed a method for image reconstruction and analysis of dual-energy X-ray scans that has been demonstrated to yield a physically intuitive characterization of materials (by electron density and effective atomic number) in a system-independent way. Our methodology stands in contrast to common practice of reconstructing images to yield linear attenuation coefficients, which depend strongly on system spectral response. At the core of our method, a technique called dual-energy decomposition is used to generate spectral energy-independent characterizations of the attenuation properties of a material. Inputs to this decomposition include system spectral response estimates and dual-energy X-ray projection data. X-ray cross-section tables are used to convert decomposition results to physical feature estimates (electron density, effective atomic number). Our method currently works best for materials with atomic numbers below 22 (titanium). In prior work for DHS, we demonstrated in a controlled, no-clutter environment that the decomposition technique could be applied to scans of a well-characterized materials on multiple systems with different X-ray spectral responses. In cases where LAC values showed a standard deviation of as much as 20% of mean value, application of our method yielded results with standard deviations as low as 1–3% of mean value.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An Analysis of Gravity-Field Estimation Based on Intersatellite Dual-1-Way Biased Ranging

The GRACE (Gravity Recovery And Climate Experiment) mission is designed to make global, highly accurate measurements of the Earth's gravity field with high spatial resolution. Ancillary GPS occultation measurements are also to be carried out for atmospheric monitoring. In the dual-1-way biased ranging of this mission, the range between two satellites separated by 100 to 200 km in nearly polar, coplanar, circular orbits, is measured to very high precision, to within an additive constant, through the exchange of K- and Ka-band sinusoidal signals. Such biased ranging data, along with GPS L-band range and phase data, can be processed and fit over successive multiday intervals to obtain accurate estimates of the Earth's gravity field. This report approximately models and analyzes this process, from the generation of the RF signals at the two satellites through the extraction of the geopotential. The steps include generation of the transmitted signals, processing the received signals to extract high-rate baseband phase, carrying out a dual-1-way combination of baseband phase to extract high-rate biased range for each band, combining K- and Ka-band ranges to correct for the ionosphere effect, and processing the resulting high-rate biased range values to extract three types of reduced-rate observables: biased range, range rate and range acceleration. The version of dual-1-way biased ranging developed by this report improves upon previous versions in a number of ways: highly accurate satellite-timetag corrections derived from concurrent GPS data, better baseband phase extraction using highly digital processing, highly accurate USO-rate calibration derived from concurrent GPS data, an improved method for extracting high-rate biased range from baseband phase, improved filtering for extracting reduced- rate observables from high-rate biased range, and parallel extraction of three observable types.

SINUSOIDAL SIGNALS↗

Combination probe for hi-frequency unsteady aerodynamic measurements

A combination probe for time-resolved measurements of unsteady compressible flows in transonic wind tunnels is described. The probe measures stagnation (total) temperature and pressure, static pressure, and flow angles in two planes. From these, the fluctuating mass flux, Mach number, and velocity as well as their components in three directions can be deduced. The combination probe consists of a dual hot-wire aspirating temperature and pressure probe mounted piggyback with a high-frequency angle probe. The angle probe has four surface-mounted silicon pressure sensors. A scheme is described for retrieving from the four pressure signals the stagnation and static pressures, Mach number, and flow angles in two planes. The calibrations forming the base for this procedure, obtained from steady-state tests, are given. Typical data obtained in the Karman vortex street shed from a cylinder and at the exit of a Mach 0.4 air jet are presented.

Ng, W. F.↗

A combination probe for high-frequency unsteady aerodynamic measurements in transonic wind tunnels

A combination probe for time-resolved measurements for unsteady compressible flows is described. The probe measures stagnation (total) temperature and pressure, static pressure, and flow angles in two planes. From these, the fluctuating mass flux, Mach number, and velocity as well as their components in three directions can be deduced. The combination probe consists of a dual hot-wire aspirating temperature and pressure probe mounted piggyback with a high-frequency angle probe. The angle probe has four surface-mounted silicon pressure sensors. A scheme is described for retrieving from the four pressure signals the stagnation and static pressures, Mach number, and flow angles in two planes. The calibrations forming the basis for this procedure, obtained from steady-state tests, are given. Typical data obtained in the Karman vortex street shed from a cylinder and at the exit of a Mach-0.4 air jet are presented.

Ng, Wing F.↗