Search NASA⌕ Search

SEARCH · Search NASA

Results for “elastic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

On fracture of fibrous composites

The problem of an existing through-the-thickness center notch in a unidirectional fibrous composite is investigated using a homogeneous anisotropic elasticity analysis in conjunction with various crack growth criteria. Tensor polynomial, strain energy density, and normal stress ratio criteria are applied as crack growth direction criteria and compared to experimental observations. For the cases and criteria studied, only the normal stress ratio criterion exhibits an ability to correctly predict crack growth direction. The normal stress ratio criterion is subsequently applied to the same cases as a failure criterion. Comparison with experiment indicates that these predictions exhibit reasonable correlation with observed critical stresses. Finally, the macroscopic approach to the problem used in this study is compared to a microscopic shear lag analysis of experimental results in the literature. The comparison indicates that both approaches yield essentially identical predictions. The comparisons made with other criteria and approaches indicate that application of the normal stress ratio within a macroscopic level analysis has great potential as an approach to modeling composite crack growth.

Beuth, J. L., Jr.↗

A quadrilateral shell element using a mixed formulation

A simple quadrilateral shell element consisting of five nodes, four corner nodes and a central node, is developed for linear elastic analysis of thin as well as moderately thick shells. Based on a modified Hellinger-Reissner principle, finite element equations are derived from the assumed displacement and strain fields. By carefully choosing appropriate strain terms, all kinematic deformation modes are suppressed. Although the present element is similar to a displacement-based degenerated shell, no locking is experienced when it is applied to thin shell problems. Five examples are given to illustrate the analysis capability of the shell element. Numerical results indicate that the element shows fast mesh convergence and gives excellent stress predictions.

Saleeb, A. F.↗

Thermally induced twist in graphite-epoxy tubes

This paper discusses an analytical and experimental study to investigate the thermally induced twist in laminated angle-ply graphite-epoxy tubes. Attention is focused on balanced laminates which, contrary to intuition, exhibit twist when the temperature is changed. The twisting is due to the fact that a lamina with ( a + phi) orientation and a lamina with (a - phi) orientation must be at slightly different radial positions in the twist. The lamina with the greater radial position determines the sense of the twist. Classical lamination theory does not predict this phenomenon, and so as more sophisticated theory must be employed. This paper outlines such as theory, which is based on an generalized plane-deformation elasticity analysis, and presents experimental data to confirm the predictions of the theory. A brief description of the experimental apparatus and procedure used to measure twist is presented.

Hyer, M. W.↗

On finite element implementation and computational techniques for constitutive modeling of high temperature composites

The research work performed during the past year on finite element implementation and computational techniques pertaining to high temperature composites is outlined. In the present research, two main issues are addressed: efficient geometric modeling of composite structures and expedient numerical integration techniques dealing with constitutive rate equations. In the first issue, mixed finite elements for modeling laminated plates and shells were examined in terms of numerical accuracy, locking property and computational efficiency. Element applications include (currently available) linearly elastic analysis and future extension to material nonlinearity for damage predictions and large deformations. On the material level, various integration methods to integrate nonlinear constitutive rate equations for finite element implementation were studied. These include explicit, implicit and automatic subincrementing schemes. In all cases, examples are included to illustrate the numerical characteristics of various methods that were considered.

Saleeb, A. F.↗

Geometric modeling of inflatable structures for lunar base

A modular inflatable structure consisting of thin, composite membranes is presented for use in a lunar base. Results from a linear elastic analysis of the structure indicate that it is feasible in the lunar environment. Further analysis requires solving nonlinear equations and accurately specifying the geometries of the structural members. A computerized geometric modeling technique, using bicubic Bezier surfaces to generate the geometries of the inflatable structure, was conducted. Simulated results are used to create three-dimensional wire frames and solid renderings of the individual components of the inflatable structure. The component geometries are connected into modules, which are then assembled based upon the desired architecture of the structure.

Nowak, Paul S.↗

New Structural-Dynamics Module for Offshore Multimember Substructures within the Wind Turbine Computer-Aided Engineering Tool FAST: Preprint

FAST, developed by the National Renewable Energy Laboratory (NREL), is a computer-aided engineering (CAE) tool for aero-hydro-servo-elastic analysis of land-based and offshore wind turbines. This paper discusses recent upgrades made to FAST to enable loads simulations of offshore wind turbines with fixed-bottom, multimember support structures (e.g., jackets and tripods, which are commonly used in transitional-depth waters). The main theory and strategies for the implementation of the multimember substructure dynamics module (SubDyn) within the new FAST modularization framework are introduced. SubDyn relies on two main engineering schematizations: 1) a linear frame finite-element beam (LFEB) model and 2) a dynamics system reduction via Craig-Bampton's method. A jacket support structure and an offshore system consisting of a turbine atop a jacket substructure were simulated to test the SubDyn module and to preliminarily assess results against results from a commercial finite-element code.

17 WIND ENERGY↗

Evaluation of Creep-Fatigue Damage Based on Simplified Model Test Approach

Current methods used in the ASME Code, Subsection NH for the evaluation of creep-fatigue damage are based on the separation of elevated temperature cyclic damage into two parts, creep damage and fatigue damage. This presents difficulties in both evaluation of test data and determination of cyclic damage in design. To avoid these difficulties, an alternative approach was identified, called the Simplified Model Test or SMT approach based on the use of creep-fatigue hold time test data from test specimens with elastic follow-up conservatively designed to bound the response of general structural components of interest. A key feature of the methodology is the use of the results of elastic analysis directly in design evaluation similar to current methods in the ASME Code, Subsection NB. Although originally developed for current material included in Subsection NH, recent interest in the application of Alloy 617 for components operating at very high temperatures has caused renewed interest in the SMT approach because it provides an alternative to the proposed restriction on the use of current Subsection NH simplified methods at very high temperatures. A comprehensive review and assessment of five representative simplified methods for creep-fatigue damage evaluation is presented in Asayama [1]. In this review the SMT methodology was identified as the best long term approach but the need for test data precluded its near term implementation. Asayama and Jetter [2] is a summary of the more comprehensive report by Asayama [1] with a summary of the SMT approach presented by Jetter [3].

Wang, Yanli↗

Analysis of deuteron elastic scattering from {sup 6,7}Li using the continuum discretized coupled channels method

The continuum discretized coupled channels (CDCC) approach is applied to analysis of deuteron elastic scattering from {sup 6,7}Li in the energy range from 10 to 50 MeV. Phenomenological neutron and proton optical potentials that are essentially important in the CDCC calculation are determined from the present optical model analysis of differential cross sections of nucleon elastic scattering, neutron total cross sections, and reaction cross sections of {sup 6,7}Li for energies from 5 to 50 MeV. The CDCC result provides satisfactory agreement with experimental data, particularly at forward angles. The obtained nucleon optical model potentials are found to describe reasonably well both nucleon and deuteron elastic scattering from {sup 6,7}Li for energies up to 50 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluating the diffusion of Kr in UO 2 and ADOPT TM using time-of-flight elastic recoil detection analysis (ToF-erda)

A combination of 300 keV 84 Kr ion implantation and Time-of-Flight Elastic Recoil Detection Analysis is utilized to investigate the diffusion of Kr in UO 2 and ADOPT TM fuels. Composition depth-profiles on the nanometer scale were obtained, both for as-implanted samples and after annealing at 800°C for 1 hour. Observed drifts in the 84 Kr profiles could be associated with short-range diffusion mechanisms. The approach employed here provides the possibility to make direct comparisons with atomistic scale modelling data, and can be of service as a separate effect test in line with the Accelerated Fuel Qualification initiative.

ADOPT UO2↗

Statistical Continuum Mechanics Analysis of Effective Elastic Properties in Solid Oxide Fuel Cell Glass–Ceramic Seal Material

A full statistical analysis of the microstructure of glass–ceramic solid oxide fuel cell (SOFC) seal material, G18, is performed to calculate elastic properties. Predictions are made for samples aged for 4 h and 1000 h, giving different crystallinity levels. Microstructure of the glass–ceramic G18 is characterized by correlation function for each individual phase. Predicted results are compared with the Voigt and Reuss bounds in this study. The weak contrast analysis results in elastic modulus predictions between the upper and lower bounds but closer to the upper bound.

Milhans, Jacqueline↗

Dynamic analysis of an elastic plate on a thin, elastic foundation

A review, correction, and extension of Vlasov and Leont'ev's (1966) analysis of beams, plates, and shells on elastic foundations is presented, and an improved theory for the motion of an elastic foundation is developed. The interaction of two or more plates resting on a common foundation is included. A simplified model is derived which appears useful for some applications.

Dowell, E. H.↗

Three-dimensional elastic stress and displacement analysis of tensile fracture specimens containing cracks

A seminumerical method is presented for three-dimensional elastic analysis of finite geometry solids with traction-free cracks. Stress and displacement distributions are calculated for two rectangular bars which are loaded by a uniform surface stress distribution. The first bar contains a through-thickness central crack while the second bar has double-edge cracks. Stress intensity factors K sub I for both configurations are presented.

Gyekenyesi, J. P.↗

Mathematical modeling of spinning elastic bodies for modal analysis.

The problem of modal analysis of an elastic appendage on a rotating base is examined to establish the relative advantages of various mathematical models of elastic structures and to extract general inferences concerning the magnitude and character of the influence of spin on the natural frequencies and mode shapes of rotating structures. In realization of the first objective, it is concluded that except for a small class of very special cases the elastic continuum model is devoid of useful results, while for constant nominal spin rate the distributed-mass finite-element model is quite generally tractable, since in the latter case the governing equations are always linear, constant-coefficient, ordinary differential equations. Although with both of these alternatives the details of the formulation generally obscure the essence of the problem and permit very little engineering insight to be gained without extensive computation, this difficulty is not encountered when dealing with simple concentrated mass models.

Likins, P. W.↗

A Double Scattering Analytical Model For Elastic Recoil Detection Analysis

We present an analytical model for calculation of double scattering in elastic recoil detection measurements. Only events involving the beam particle and the recoil are considered, i.e. 1) an ion scatters off a target element and then produces a recoil, and 2) an ion produces a recoil which then scatters off a target element. Events involving intermediate recoils are not considered, i.e. when the primary ion produces a recoil which then produces a second recoil. If the recoil element is also present in the stopping foil, recoil events in the stopping foil are also calculated. We included the model in the standard code for IBA data analysis NDF, and applied it to the measurement of hydrogen in Si.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time of flight elastic recoil detection analysis with a position sensitive detector

A position sensitive detection system based on the microchannel plate detector has been constructed and installed at the existing time of flight (TOF) spectrometer in order to perform a kinematic correction and improve the surface time/depth resolution of elastic recoil detection analysis (ERDA) system. The position resolution of the detector has been tested for different types of ions and anode voltages. TOF spectra of recoiled O ions from SiO{sub 2} and F from CaF{sub 2} were collected in coincidence with position sensitive detector signal. Kinematic correction of TOF spectra improved surface time/depth resolution by {approx}20% for our system; however even higher improvements could be obtained in larger solid angle TOF-ERDA systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mg segregation in Mg-rich Mg-Ni switchable mirror studied by Rutherford backscattering, elastic recoil detection analysis, and nuclear reaction analysis

Pd/Mg{sub 3.3}Ni films were prepared by dc sputtering deposition on three different substrates of glass, diamondlike carbon/Si, and Si. Hydrogenation and dehydrogenation cycles were performed on these samples simultaneously. The optical switching property due to the hydrogenation and dehydrogenation was monitored by the transmission of laser light via the glass substrate. The switching ability was totally lost after 120 cycles. We made comparative study of the composition change between the new (as-deposited) and old (after 120 switching cycles) samples by Rutherford backscattering (RBS), elastic recoil detection analysis (ERDA), and nuclear reaction analysis (NRA). From the RBS results we found out the segregation of a Mg layer between the Pd cap layer and the rest of the Mg-Ni layer. At the Pd/Mg interface in the old sample, thin MgO layer formed probably during the dehydrogenation process with O{sub 2}. ERDA showed that there is much hydrogen in the old sample. NRA displayed the depth profiles of hydrogen distribution in the old sample. It is revealed that much hydrogen is accumulated at the interface between the Pd cap layer and the segregated Mg layer. It can be concluded that the formations of oxide and hydride of the segregated Mg layer are the main reasons for the degradation of the Mg{sub 3.3}Ni switchable mirror.

36 MATERIALS SCIENCE↗

Meta-Analysis of the Oil Price Elasticity of the GDP for Policy Analysis: Documentation

Given the important role of oil in economic activities, policy makers are interested in estimates of the potential damage to the economy from oil price shocks, particularly during periods of rapid and large increases that accompany severe shocks. Such estimates are needed to quantify the economic costs of oil price shocks, and to evaluate the potential benefits of alternative policy responses. Although research on the economic impacts of oil price shocks is extensive and has generally found that large increases in oil prices exert negative economic impacts, the range of estimates, summarized by the oil price elasticity of the GDP or other aggregate measure of economic activity, is very wide. There are also conditions under which the relationship between the oil price and the economy could be positive. The range of estimates of the oil price elasticity of the GDP for the United States is typified by averages from the studies of Hamilton (2005, 2012) and Kilian and Vigfusson (2014), in which the implied elasticities were -0.014 to - 0.069 and +0.004 to -0.052, respectively. We employ a meta-regression approach to systematically summarize available estimates of the oil price elasticity of the GDP for oil importing economies, and examine the role of key factors. The resulting regression model was used to estimate the oil price elasticity of the GDP for the United States. Based on this we estimate the mean elasticity for the United States at -0.0238, with a 68% confidence interval of -0.0075 to -0.0402, four quarters after a shock.

02 PETROLEUM↗