Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron energy distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Microwave signature of thick-target electron beams in solar flares

The steady-state behavior of a flux of nonthermal electrons injected into a fully ionized thick target is examined. Owing to the (inverse square) energy dependence of the Coulomb collisional cross section, it is found that injected electron distributions that are monotonically decreasing functions of electron energy develop at finite depths into distributions that have 'humps' in velocity space; the electron energy corresponding to the hump correlates with the overlying particle column density to the target. This results in a two-stream unstable situation. The distribution is constantly being relaxed by quasi-linear relaxation and re-created by collisions; in this way a steady nonthermal level of Langmuir plasma waves is created, and these waves in turn produce microwave plasma radiation with a typical flux of 3 x 10 to the -16th erg/sq cm-sec. This flux can be enhanced by a factor of up to 100 by a high level of low-frequency (such as ion-acoustic) turbulence, which prevents quasi-linear relaxation for a sufficient fraction of the path length.

Emslie, A. G.↗

Auroral data from Michigan airglow payload launch

Auroral studies are presented of flight data analysis from the Michigan airglow payload. Analysis of the stellar occultation data and results from the twilight flight are reported. Optical emissions from bottled aurora and an electron analyzer for measurement of distributions in energy of electrons along a beam are also presented. A list of related publications is included.

Hays, P. B.↗

Power

The space station requires an increase in power or energy of at least several orders of magnitude compared to previous space missions. With the requirement up in the range of 10 kilowatt hours, this obviiously requires the development of new technology. Although the power area is very well integrated in the spacecraft itself, it represents a diverse set of components necessary for energy conversion, electronics, and energy distribution. Considerable work is ongoing at NASA Lewis in the power devices development area, including transformers, large area solid-state chips, transistors, and fast recovery diodes. This work is oriented toward eventual application to both AC and DC power conversion approaches. In the energy storage area, there are many options available to fit into the space station representing various degrees of risk and leverage combination, such as the near-term integral-pressure-vessel nickel hydrogen battery, an advanced Ni-H2 battery concept, and the regenrative hydrogen-oxygen system utilizing essentially the Shuttle orbiter type of fuel cell.

Corbett, R.↗

VLBI observations of the RS Canum Venaticorum binary systems UX Arietis and HR 1099 at 1.65 GHz

VLBI observations of the RS CVn binaries UX Arietis and HR 1099 have been made at 1.65 GHz using a three-element array with a minimum fringe spacing of 11.5 milli-arcsec. Both sources were found to be unresolved within measurement uncertainties. In both cases, the derived upper limit to the source size was comparable to the overall size of each binary system. The lower limits to the brightness temperature were 1.4 x 10 to the 10th K for UX Arietis and 2.9 x 10 to the 10th K for HR 1099. Simultaneous polarization measurements at the VLA showed 4-8 percent circular polarization and less than 2 percent linear polarization. It is found that the data are consistent with gyrosynchrotron emission from a power-law energy distribution of electrons in a magnetic field B less than or approximately equal to 6 gauss.

Mutel, R. L.↗

Detection of a sub-milliarcsecond radio component in the RS CVn system HR 1099

The RS CVn system HR 1099 was observed with a five station VLBI array at a frequency of 8.4 GHz during a strong radio outburst of approximately 400 mJy. The data are consistent with a circular Gaussian source of 0.8 + or - 0.12 milli-arcsec (FWHM), corresponding to a linear size of 4 + or - 0.6 x 10 to the 11th cm. This is comparable to the distance between the surfaces of the two stars, or to 75 percent of the diameter of the chromospherically active K star. Extrapolation of published photometric data shows that the starspot formation of HR 1099 was facing toward the observers at the times of observations. The high equivalent brightness temperature, approximately 10 billion K, is consistent with gyrosynchrotron emission from a power-law energy distribution of electrons in a magnetic field of strength about 30 gauss.

Mutel, R. L.↗

Electron density-sensitive line ratios for Fe XII in the solar corona

The collision strengths for electron-impact excitation of fine-structure transitions from the ground 3s23p3 configuration to the excited 3s3p4 configuration in Fe XII are presented. These are calculated by transforming the K-matrices obtained in a nonrelativistic R-matrix method to K-matrices in intermediate coupling using term-coupling coefficients which take into account the effect of breakdown of target LS coupling. Extensive configuration-interaction wave functions are used to represent the target states. The effective collision strengths are determined assuming a Maxwellian distribution of electron energies. Rydberg series of resonances converging to the excited state thresholds are explicitly included in the calculation. The relative level populations and emission-line strengths for Fe XII are calculated using the new atomic data presented in this paper and that published by Tayal, Henry, and Pradhan (1987) and Tayal and Henry (1986) over a wide range of electron densities and temperatures (1-2 x 10 to the 6th K). Present results for collision strengths and emission-line strengths are compared with the previous calculation of Flower (1977). Some significant differences are noted.

Tayal, S. S.↗

Electron velocity space hole modes and narrowband electrostatic noise in the distant tail

Narrowband electrostatic noise (NEN) is frequently observed upstream of the slow shocks in the distant tail. It is suggested that NEN represents a nonstandard plasma wave mode which results from a hole in the low energy electron velocity distribution. A very simple model which plausibly indicates how a hole might be formed by the interaction of the electrons with the slow shock is presented. The hole mode is destabilized by a positive slope in the parallel electron distribution and/or by a weak beam of energetic ions which escape upstream from the slow shock.

Coroniti, Ferdinand V.↗

Radio synthesis imaging during the GRO solar campaign

The Owens Valley (OVRO) Solar Array was recently expanded to 5 antennas. Using frequency synthesis, the 5-element OVRO Solar Array has up to 450 effective baselines, which can be employed as necessary to make maps at frequencies in the range 1 to 18 GHz. Fortuitously, the last of the 5 antennas was completed and brought into operation on 7 Jun., just in time for the Gamma Ray Observatory (GRO)/Max 1991 observing campaign. Many events were observed jointly with OVRO and the BATSE experiment on GRO, including the six larger events that are presented in tabular form. Unfortunately, the X flares that occurred during the campaign all occurred outside the OVRO time range. The UV coverage of the newly expanded solar array, combined with frequency synthesis, should give a more complete view of solar flares in the microwave range by providing simultaneous spatial and spectral resolution. A promising application of MEM (maximum entropy) is also being pursued that will use smoothness criteria in both the spatial and spectral domains to give brightness temperature maps at each observed frequency (up to 45 frequencies every 10 s). Such maps can be compared directly with the theory of microwave emission to yield plasma parameters in the source - notably the number and energy distribution of electrons, for comparison with the x ray and gamma ray results from GRO.

Gary, Dale E.↗

Laboratory Astrophysics at the LLNL Electron Beam Ion Traps: EBIT-I and EBIT-II

In order to provide a complete, accurate set of atomic data for interpreting spectra provided by missions such as XMM-Newton, the Chandra X-Ray Observatory, and Astro-E2, we have harnessed the Lawrence Livermore National Laboratory's electron beam ion traps EBIT-I. EBIT-II, and Super-EBIT for laboratory astrophysics. In support of this work we have developed a number of unique techniques, including the ability to experimentally simulate a Maxwellian distribution of electron energies and measuring low-energy charge exchange cross sections using the magnetic trapping mode. We have also built and operated a full suite of spectrometers spanning the 1-7000 Angstrom wavelength band, the most recent being a spectrometer based on a spare Astro-E (6 x 6) microcalorimeter array. Results of our efforts include a complete list of wavelengths of the Fe L-shell transitions, measurements of absolute and relative cross sections for direct impact, dielectronic, and resonance excitation, and measurements of low energy charge transfer reactions. A brief overview of the LLNL ebit facility, its capabilities, and some results will be discussed.

Brown, G. V.↗

Saturn Radiation (SATRAD) Model

The Saturnian radiation belts have not received as much attention as the Jovian radiation belts because they are not nearly as intense-the famous Saturnian particle rings tend to deplete the belts near where their peak would occur. As a result, there has not been a systematic development of engineering models of the Saturnian radiation environment for mission design. A primary exception is that of Divine (1990). That study used published data from several charged particle experiments aboard the Pioneer 1 1, Voyager 1, and Voyager 2 spacecraft during their flybys at Saturn to generate numerical models for the electron and proton radiation belts between 2.3 and 13 Saturn radii. The Divine Saturn radiation model described the electron distributions at energies between 0.04 and 10 MeV and the proton distributions at energies between 0.14 and 80 MeV. The model was intended to predict particle intensity, flux, and fluence for the Cassini orbiter. Divine carried out hand calculations using the model but never formally developed a computer program that could be used for general mission analyses. This report seeks to fill that void by formally developing a FORTRAN version of the model that can be used as a computer design tool for missions to Saturn that require estimates of the radiation environment around the planet. The results of that effort and the program listings are presented here along with comparisons with the original estimates carried out by Divine. In addition, Pioneer and Voyager data were scanned in from the original references and compared with the FORTRAN model s predictions. The results were statistically analyzed in a manner consistent with Divine s approach to provide estimates of the ability of the model to reproduce the original data. Results of a formal review of the model by a panel of experts are also presented. Their recommendations for further tests, analyses, and extensions to the model are discussed.

Garrett, H. B.↗

Electron Collisional Excitation Rates for OI USING the B-Spline R-Matrix Approach

The B-spline R-matrix approach has been used to calculate electron collisional excitation strengths and rates for transitions between the 3P, 1D, and 1S states of ground configuration and from these states to the states of the excited 2s(sup 2)2p(sup 3)ns (n = 3-5), 2s(sup 2)2p(sup 3)np (n = 3-4), 2s(sup 2)2p(sup 3)nd (n = 3-4), 2s(sup 2)2p(sup 3)4f, and 2s2p(sup 5) configurations. The nonorthogonal orbitals are used for an accurate description of both the target wave functions and the R-matrix basis functions. The thermally averaged collision strengths are obtained from the collision strengths by integrating over a Maxwellian velocity distribution of electron energies, and these are tabulated over a temperature range from 1000 to 60,000 K. The parametric functions of scaled energy have also been obtained to represent collision strengths over a wide energy range or thermally averaged collision strengths at any desired temperature.

Zatsarinny, O.↗

New Accurate Oscillator Strengths and Electron Excitation Collision Strengths for N1

The nonorthogonal orbitals technique in a multiconfiguration Hartree-Fock approach is used to calculate oscillator strengths and transition probabilities of N(I) lines. The relativistic effects are allowed by means of Breit-Pauli operators. The length and velocity forms of oscillator strengths show good agreement for most transitions. The B-spline R-matrix with pseudostates approach has been used to calculate electron excitation collision strengths and rates. The nonorthogonal orbitals are used for an accurate description of both target wave functions and the R-matrix basis functions. The 24 spectroscopic bound and autoionizing states together with 15 pseudostates are included in the close-coupling expansion. The collision strengths for transitions between fine-structure levels are calculated by transforming the LS-coupled K-matrices to K-matrices in an intermediate coupling scheme. Thermally averaged collision strengths have been determined by integrating collision strength over a Maxwellian distribution of electron energies over a temperature range suitable for the modeling of astrophysical plasmas. The oscillator strengths and thermally averaged collision strengths are presented for transitions between the fine-structure levels of the 2s(sup 2)p(sup 3) (sup 4)S(sup 0), (sup 2)D(sup 0), (sup 2)P(sup 0), 2s2p(sup 4) (sup 4)P, 2s(sup 2)2p(sup 2)3s (sup 4)P, and (sup 2)P terms and from these levels to the levels of the 2s(sup 2)2p(sup 2)3p (sup 2)S(sup 0), (sup 4)D(sup 0), (sup 4)P(sup 0), (sup 4)S(sup 0), (sup 2)D(sup 0), (sup 2)P(sup 0),2s(sup 2)2p(sup 2)3s(sup 2)D, 2s(sup 2)2p(sup 2)4s(sup 4)P, (sup 2)P, 2s(sup 2)2p(sup 2)3d(sup 2)P, (sup 4)F,(sup 2)F,(sup 4)P, (sup 4)D, and (sup 2)D terms. Thermally averaged collision strengths are tabulated over a temperature range from 500 to 50,000 K.

Tayal, S. S.↗