Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Electronic and magnetic phase diagram of [Beta]Fe[subscript1.01]Se with superconductivity at 36.7 K under pressure

The discovery of new high-temperature superconductors based on FeAs has led to a new 'gold rush' in high-T{sub C} superconductivity. All of the new superconductors share the same common structural motif of FeAs layers and reach T{sub C} values up to 55 K. Recently, superconductivity has been reported in FeSe, which has the same iron pnictide layer structure, but without separating layers. Here, we report the magnetic and electronic phase diagram of {beta}-Fe{sub 1.01}Se as a function of temperature and pressure. The superconducting transition temperature increases from 8.5 to 36.7 K under an applied pressure of 8.9 GPa. It then decreases at higher pressures. A marked change in volume is observed at the same time as T{sub C} rises, owing to a collapse of the separation between the Fe{sub 2}Se{sub 2} layers. No static magnetic ordering is observed for the whole p-T phase diagram. We also report that at higher pressures (starting around 7 GPa and completed at 38 GPa), Fe{sub 1.01}Se transforms to a hexagonal NiAs-type structure and exhibits non-magnetic behavior.

36 MATERIALS SCIENCE↗

Correlative Energy-Dispersive X-Ray Spectroscopic Tomography and Atom Probe Tomography of the Phase Separation in an Alnico 8 Alloy

Alnico alloys have long been used as strong permanent magnets because of their ferromagnetism and high coercivity. Understanding their structural details allows for better prediction of the resulting magnetic properties. However, quantitative three-dimensional characterization of the phase separation in these alloys is still challenged by the spatial quantification of nanoscale phases. Herein, we apply a dual tomography approach, where correlative scanning transmission electron microscopy (STEM) energy-dispersive X-ray spectroscopic (EDS) tomography and atom probe tomography (APT) are used to investigate the initial phase separation process of an alnico 8 alloy upon non-magnetic annealing. STEM-EDS tomography provides information on the morphology and volume fractions of Fe–Co-rich and Νi–Al-rich phases after spinodal decomposition in addition to quantitative information of the composition of a nanoscale volume. Subsequent analysis of a portion of the same specimen by APT offers quantitative chemical information of each phase at the sub-nanometer scale. Furthermore, APT reveals small, 2–4 nm Fe-rich α 1 phases that are nucleated in the Ni-rich α 2 matrix. From this information, we show that phase separation of the alnico 8 alloy consists of both spinodal decomposition and nucleation and growth processes. Lastly, we discuss the complementary benefits and challenges associated with correlative STEM-EDS and APT.

36 MATERIALS SCIENCE↗

First-order melting of a weak spin-orbit mott insulator into a correlated metal

Herein, the electronic phase diagram of the weak spin-orbit Mott insulator (Sr 1-x La x ) 3 Ir 2 O 7 is determined via an exhaustive experimental study. Upon doping electrons via La substitution, an immediate collapse in resistivity occurs along with a narrow regime of nanoscale phase separation comprised of antiferromagnetic, insulating regions and paramagnetic, metallic puddles persisting until x≈0.04. Continued electron doping results in an abrupt, first-order phase boundary where the Néel state is suppressed and a homogenous, correlated, metallic state appears with an enhanced spin susceptibility and local moments. In conclusion, as the metallic state is stabilized, a weak structural distortion develops and suggests a competing instability with the parent spin-orbit Mott state.

36 MATERIALS SCIENCE↗

Alpha phase precipitation from phase-separated beta phase in a model Ti-Mo-Al alloy studied by direct coupling of transmission electron microscopy and atom probe tomography

The benefit of direct coupling of APT with TEM dark field imaging to investigate early stages of phase transformation in multicomponent alloys is demonstrated by analyzing alpha phase precipitated in a model Ti-10 at% Mo-10 at% Al alloy during annealing at 400oC. Through such a direct coupling approach a thermodynamically unexpected solute partitioning trend between beta matrix and alpha precipitate is observed in the early stages of precipitation, which is explained based on possible nucleation of alpha phase in the Ti rich (Mo and Al depleted regions) created as a result of phase separation in beta matrix. On further higher temperature annealing at 600oC for 1 hour, the alpha precipitates were shown to grow and get enriched in Al and further depleted in Mo reaching the thermodynamic equilibrium.

Environmental Molecular Sciences Laboratory↗

Lifshitz Transitions In Multi-band Hubbard Models for Topological Superconductivity in Complex Quantum Matter

How the macroscopic quantum coherence can resist to the decoherence attacks of high temperature is a major challenge for the science of the twenty-first century. Superstripes 2017 conference held in Ischia on June 2017 has been focused on the new physics of high-T{sub c} superconductors made of complex quantum matter. Today, the standard model of high-T{sub c} superconductivity which grabs the physics of complex quantum matter is the multi-band Hubbard model where the dome of T{sub c} occurs by driving the chemical potential in the proximity of a topological Lifshitz transition. The multi-gap superconductivity in the T{sub c} dome is driven by exchange interaction between a first condensate in the BEC-BCS crossover which coexists with second BCS condensates. The proximity to Lifshitz transitions in correlated electronic systems gives the ubiquitous arrested phase separation observed in all high-temperature superconductors. Non-Euclidean filamentary hyperbolic geometry is needed for the space description of superstripe textures produced by the coexistence of short-range CDW puddles, hole-poor SDW puddles, and self-organized dopant-rich puddles. A road map to room-temperature superconductors in particular organic compounds made of superlattices of quantum wires driven by Fano resonances with one of the condensates in the BEC-BCS crossover has been proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Guided Crystallization of P3HT in Ternary Blend Solar Cell Based on P3HT:PCPDTBT:PCBM

To mimic the performance of the tandem solar cells, ternary blend solar cells with a single active layer of P3HT:PCPDTBT:PC61BM were cast from chlorobenzene and thermally annealed. By varying blending ratio, thermal annealing time and P3HT molecular weight, the device performance was enhanced relative to the binary references.For further understanding, the morphology of the active layer was studied using hard and soft X-ray scattering methods in concert with bright field and energy resolved transmission electron microscopies. We found that the phase separation of the amorphous PCPDTBT and P3HT guided the formation of P3HT fibrils, resulting in a unique multi-length-scale morphology. This morphology consisted of bundles of well-defined P3HT fibrils, forming a network, imbedded in an amorphous mixture of the PCBM, PCPDTBT and P3HT. The two polymers acted independently in their specific photoactive ranges, and the sensitization of PCPDTBT benefited the cascade charge transfer. In addition, this multi-length-scale morphology was linked to the improved device performance of P3HT:PCPDTBT:PC 61 BM and the photophysics of the active layer.

14 SOLAR ENERGY↗

Rotational excitation of H2 in collision with H

Rate coefficients for the reactive processes of ortho-para conversion in which the j = 0 rotational level of molecular hydrogen is excited to the j = 1 and j = 3 level by impacts with hydrogen atoms are calculated for temperatures between 30 K and 1000 K using a fully converged complete close-coupled method. Rate coefficients are also obtained for the excitation from the j = 0 to the j = 2 rotational level and from the j = 1 to the j = 3 rotational level. The interference between the direct and reactive channels is taken into account as is the geometric phase resulting from the adiabatic separation of electronic and nuclear motion that generates the potential energy surface. Convenient analytic representations of the rate coefficients are presented.

Sun, Y.↗

Electronics Upgrades to the Green is Clean Phoswich Detector Systems and Programmatic Implementation at LANL - Phase II Completion - 18403

Los Alamos National Laboratory (LANL) radiological facilities produce low-density room trash that, in many cases, is not contaminated with radioactivity. It has been estimated that 50 to 90% of low-density room trash is free of radioactive contamination and eligible for inclusion in LANL's Green is Clean (GIC) program. The GIC program is a verification program for non-regulated waste from radiation controlled areas that has been actively segregated as nonradioactive through the use of the waste generator's acceptable knowledge. The GIC program has employed two large area Phoswich gamma ray detector systems (HERCULES and ZEUS) to verify that GIC candidate low-density waste contains no radioactivity above background. The large area (127 cm{sup 2}) Phoswich detectors consist of a thin NaI front crystal (3 mm thick) that is optically coupled to a thick CsI back crystal (50 mm thick). The scintillation properties of the two crystals are different enough to allow the system's electronic components to identify the origin of any pulse. The original systems utilize Nuclear Instrumentation Module (NIM) electronics to process the detector signals. The electronics currently in use by the systems are out of date and some components are no longer manufactured. In 2015, phase I upgrades to the GIC detector systems were completed. Phase I objectives included identifying more modern commercially available electronics that could replace the NIM electronics. A pulse shape discriminator (PSD) module, the Digital Gamma Finder (DGF) Pixie-4 made by XIA LLC, that fits in a compact National Instruments{sup TM} PXI chassis was identified to replace the majority of the original NIM bin electronics - a single Pixie-4 module replaces four NIM amplifiers and four NIM pulse shape analyzers (PSAs). Another phase I objective was to show that that new PSD could separate out the NaI and CsI detector signals in a manner equivalent to or better than the NIM electronics. Proof of concept was achieved in 2015 when a prototype upgrade system on ZEUS was built and tested and gating parameter settings were determined that successfully separated the NaI and CsI signals. Phase II required establishing a LabVIEW software interface with Pixie-4 electronics in lieu of the manufacturer provided Pixie-4 software called the Pixie Viewer. In addition, phase II included 1) final optimization of the gating parameters on the prototype Pixie-4 ZEUS system, 2) finalizing Requirements, Design and Test Plan documents, 3) LabVIEW software interface quality assurance (QA) testing, 4) setting up the HERCULES system with the Pixie-4 upgrade electronics, 5) check source and background calibration of both systems, 6) absolute efficiency determination on both systems and 7) procedure revisions and implementation of both systems into routine operations. In 2017 phase II was completed including the preparation of detailed Requirements, Design and Test Plan documents. The LabVIEW interface software that communicates and controls the Pixie-4 has been completed, merged with the preexisting LabVIEW operations software and fully tested. Gating parameter optimization, configuration of HERCULES with the Pixie-4 electronics, check source and background calibrations and absolute efficiency determinations have all been performed - quantitative results are presented in the full paper. For performance validation, comparison measurements of actual GIC bags on both the HERCULES system using the old NIM Bin electronics and the ZEUS system using the upgraded Pixie-4 electronics have been done and evaluated. Finally, procedure revisions and implementation of both systems into routine operations is currently in process and planned to be complete by the end of calendar year 2017. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Specific features of the cathodoluminescence spectra of AlInGaN QWs, caused by the influence of phase separation and internal electric fields

The specific features of the cathodoluminescence (CL) spectra in AlInGaN heterostructures, caused by the influence of phase separation and internal electric fields, observed at varied CL excitation density, are studied. It is shown that the evolution of the CL spectrum and the variation in the spectral position of emission lines of nanoscale layers with current density in the primary electron beam makes it possible to identify the occurrence of phase separation in the layer and, in the absence of this separation, to estimate the electric-field strength in the active region of the structure.

36 MATERIALS SCIENCE↗

Statistical mechanics of light elements at high pressure. VI - Liquid-state calculations with Thomas-Fermi-Dirac theory

A model free energy is developed for hydrogen-helium mixtures based on solid-state Thomas-Fermi-Dirac calculations at pressures relevant to the interiors of giant planets. Using a model potential similar to that for a two-component plasma, effective charges for the nuclei (which are in general smaller than the actual charges because of screening effects) are parameterized, being constrained by calculations at a number of densities, compositions, and lattice structures. These model potentials are then used to compute the equilibrium properties of H-He fluids using a charged hard-sphere model. The results find critical temperatures of about 0 K, 500 K, and 1500 K, for pressures of 10, 100, and 1000 Mbar, respectively. These phase separation temperatures are considerably lower (approximately 6,000-10,000 K) than those found from calculations using free electron perturbation theory, and suggest that H-He solutions should be stable against phase separation in the metallic zones of Jupiter and Saturn.

Macfarlane, J. J.↗

A semiempirical study for the ground and excited states of free-base and zinc porphyrin-fullerene dyads

The ground and excited states of a covalently linked porphyrin-fullerene dyad in both its free-base and zinc forms (D. Kuciauskas et al., J. Phys. Chem. 100 (1996) 15926) have been investigated by semiempirical methods. The excited-state properties are discussed by investigation of the character of the molecular orbitals. All frontier MOs are mainly localized on either the donor or the acceptor subunit. Thus, the absorption spectra of both systems are best described as the sum of the spectra of the single components. The experimentally observed spectra are well reproduced by the theoretical computations. Both molecules undergo efficient electron transfer in polar but not in apolar solvents. This experimental finding is explained theoretically by explicitly considering solvent effects. The tenth excited state in the gas phase is of charge-separated character where an electron is transferred from the porphyrin donor to the fullerene acceptor subunit. This state is stabilized in energy in polar solvents due to its large formal dipole moment. The stabilization energy for an apolar environment such as benzene is not sufficient to lower this state to become the first excited singlet state. Thus, no electron transfer is observed, in agreement with experiment. In a polar environment such as acetonitrile, the charge-separated state becomes the S, state and electron transfer takes place, as observed experimentally. The flexible single bond connecting both the donor and acceptor subunits allows free rotation by ca. +/- 30 degrees about the optimized ground-state conformation. For the charge-separated state this optimized geometry has a maximum dipole moment. The geometry of the charge-separated state thus does not change relatively to the ground-state conformation. The electron-donating properties of porphyrin are enhanced in the zinc derivative due to a reduced porphyrin HOMO-LUMO energy gap. This yields a lower energy for the charge-separated state compared to the free-base dyad.

Bridged Compounds/chemistry↗

Local electric field direct writing – Electron-beam lithography and mechanism

Local electric field induced by a focused electron probe in silicate glass thin films is evaluated in this paper by the migration of cations. Extremely strong local electric fields can be obtained by the focused electron probe from a scanning transmission electron microscope. As a result, collective atomic displacements occur. This newly revised mechanism provides an efficient tool to write patterned nanostructures directly, and thus overcome the low efficiency of the conventional electron-beam lithography. Applying this technique to silicate glass thin films, as an example, a grid of rods of nanometer dimension can be efficiently produced by rapidly scanning a focused electron probe. This nanopatterning is achieved through swift phase separation in the sample, without any post-development processes. The controlled phase separation is induced by massive displacements of cations (glass modifiers) within the glass-former network, driven by the strong local electric fields. The electric field is induced by accumulated charge within the electron probed region, which is generated by the excitation of atomic electrons by the incident electron. Throughput is much improved compared to other scanning probe techniques. Finally, the half-pitch spatial resolution of nanostructure in this particular specimen is 2.5 nm.

36 MATERIALS SCIENCE↗

Ionic Tuning of Cobaltites at the Nanoscale

Control of materials through custom design of ionic distributions is one of the most promising approaches for developing future technologies ranging from spintronic logic and memory devices to energy storage. Perovskites have shown particular promise for ionic-devices due to their high ion mobility and sensitivity to chemical stoichiometry. In this work, we demonstrate control of ion distributions in (La,Sr)CoO3. Commensurate with control of the oxygen stoichiometry, the Co valence and saturation magnetization show a smooth continuous variation. In contrast, magnetoresistance measurements show a sharp, step-wise transition in the magnetic anisotropy and resistivity over the same range of oxygen stoichiometry. These results suggest significant phase separation, with conductive magnetic regions and oxygen-deficient, insulating, non-magnetic regions, forming percolated networks. Indeed, X-ray diffraction identifies oxygen vacancy ordering, including the emergence of Brownmillerite ordering. The unusual appearance of the Brownmillerite phase under ambient temperature is further confirmed by high resolution scanning transmission electron microscopy. This work demonstrates room-temperature ionic control of magnetism, electrical conductivity and crystalline structure, in a 40 nm film, presenting new opportunities for ionic devices that leverage multiple material properties.

thin films, magnetism, xmcd, pnr, STEM, defects↗

Enhancement of local electrical conductivities in SiC by femtosecond laser modification

Enhancement of local electric conductivities induced by femtosecond laser modification in silicon carbide was studied. Current-voltage (I-V) characteristics of the laser-modified regions were measured between the ion-implanted metal contacts. Interestingly, the resistance sharply decreased in the fluence range from 5.0 to 6.7 J/cm{sup 2}. The resistance at the irradiation fluence of 53 J/cm{sup 2} decreased by more than six orders of magnitude compared with the nonirradiated one. From the I-V characteristics and the scanning electron microscope observations, we conclude that the phase separation associate with the formation of classical laser induced periodic structure causes the drastic increase in electric conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improving the efficiencies of small molecule solar cells by solvent vapor annealing to enhance J-aggregation

Here, we report highly efficient small molecule organic solar cells (SM-OSCs) based on a porphyrin derivative electron donor of ZnP2-DPP and an electron acceptor of [6,6]-phenyl-C 61 -butyric acid methyl ester (PC 60 BM) by using a solvent vapor annealing (SVA) method with a series of low boiling solvents. Absorption spectral studies indicate that carbon disulfide (CS 2 ) SVA induces J-aggregation in blend films accompanied by expanded and enhanced absorption which contributes largely to the fabrication of broader light response and larger short-circuit current (J SC ) solar cell devices. In addition, we systematically analyze the relationship between the film morphology and device performance. Finally, the electronic study shows that the CS 2 SVA-treated device showed a higher exciton generation rate and enhanced carrier collection efficiency. And the morphology study indicates that the blend films treated with CS2 SVA exhibit tighter molecular packing, better crystallization and an appropriate phase separation length scale. In other words, these collective electronic and morphological features correlate well with the champion J SC , the fill factor (FF) and the power conversion efficiency (PCE) of the CS 2 treated devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ZrO{sub 2}-ZnO composite thin films for humidity sensing

ZrO{sub 2}-ZnO composite thin films were grown by reactive DC magnetron sputtering. X-ray diffraction studies reveal the composite nature of the films with separate ZnO and ZrO{sub 2} phase. Scanning electron microscopy studies confirm the nanocrystalline structure of the films. The films were studied for their impedometric relative humidity (RH) sensing characteristics. The complex impedance plot was fitted with a standard equivalent circuit consisting of an inter-granular resistance and a capacitance in parallel. The DC resistance was found to be decreasing with increase in RH.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cometary MHD and chemistry

An MHD and chemical comet-coma model was developed, applying the computer program of Huebner (1985) for the detailed chemical evolution of a spherically expanding coma and the program of Schmidt and Wegman (1982) and Wegman (1987) for the MHD flow of plasma and magnetic field in a comet to the Giotto-mission data on the ion abundances measured by the HIS ion mass spectrometer. The physics and chemistry of the coma are modeled in great detail, including photoprocesses, gas-phase chemical kinetics, energy balance with a separate electron temperature, multifluid hydrodynamics with a transition to free molecular flow, fast-streaming atomic and molecular hydrogen, counter and cross streaming of the ionized species relative to the neutral species in the coma-solar wind interaction region with momentum exchange by elastic collisions, mass-loading through ion pick-up, and Lorentz forces of the advected magnetic field. The results, both inside and outside of the contact surface, are discussed and compared with the relevant HIS ion mass spectra.

Wegmann, R.↗