Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Application of linear least squares to the analysis of Auger electron spectroscopy depth profiles of plutonium oxides [Application of linear least squares to the analysis of AES depth profiles of plutonium oxides]

In this paper, the application of the linear least squares (LLS) methodology allows for quantitative determination of variation in material composition with depth. LLS fits were applied to decompose and enhance the interpretation of spectra obtained by Auger electron spectroscopy during depth profiles of oxidized plutonium surfaces. By means of the LLS algorithm, chemical state assignments of the Pu P 1 VV/O 45 VV, O KLL, and C KLL Auger transitions were determined and the existence of a subsurface oxycarbide layer was identified, with confirmation of the oxide and metal components provided from comparison to previous measurements of standard samples.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Special Features of the Structure of Titanium Nitride Coatings in Substrate Surface Cuts

Elemental compositions and structure-phase states of titanium nitride coatings on the flat surface and in a cut of substrate from 10Cr18Ni10Ti steel are investigated by the methods of x-ray microspectral analysis, Auger electron spectroscopy, and dark-field electron microscopy analysis of the bending-torsion of the crystal lattice. It is established that the coating in the cut, unlike the coating on the frontal surface, has a modified elemental composition and a two-layer structure whose special features and thicknesses change with distance from the sample surface. It is shown that these changes are caused by phase transformations, decreased number of defects, dispersion of layer structures, and increased concentration of impurities with increasing distance from the substrate surface. Based on the results obtained, possible conditions for coating structure formation in the cut of the substrate surface are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Microstructural and chemical characterization of a purple pigment from a Faiyum mummy portrait

Results are presented from analyses that were conducted to explain the presence of chromium, detected noninvasively using energy dispersive X-ray fluorescence (XRF), in the unusually large (2-3mm diameter) rough gem-like purple pigment particles in the paint used for a Faiyum mummy portrait. An approximately 50 µm diameter particle of the chromium-containing purple pigment was extracted from the Portrait of a Bearded Man, dated to Roman Imperial Egypt in the second century, circa 170-180 CE, accession #32.6 in the Walters Art Museum collection. The particle was characterized using energy dispersive X-ray fluorescence analysis, electron microscopy, diffraction, and atom probe tomography. It is demonstrated that the purple pigment particle is a heterogeneous organic pigment, specifically, a lake pigment likely derived from either plant or insect matter, which contains minor percentages of both transition metals and alkali / alkali earth metals, with nanometer-scale crystallites of lead carbonates and sulfates. The analyses revealed for the first time the nanoscale microstructure and stratigraphy in an ancient lake pigment. Results suggest that similarities with respect to time-period and place of production may be developed among unprovenienced Faiyum mummy portraits to help localize workshops or artists, using analyses focused on lake pigments to characterize specifically metal-based mordants.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The Influence of Nominal Composition on the Microstructure, Tensile Properties, and Weldability of Cast Monel Alloys

Cast Monel alloys are used in many industrial applications that require a combination of good mechanical properties and excellent resistance to corrosion. Despite relative widespread use, there has been limited prior research investigating the fundamental composition–structure–property relationships. Here in this work, microstructural characterization, thermal analysis, electron probe microanalysis, tensile testing, and Varestraint testing were used to assess the effects of variations in nominal composition on the solidification path, microstructure, mechanical properties, and solidification cracking susceptibility of cast Monel alloys. It was found that Si segregation caused the formation of silicides at the end of solidification in grades containing at least 3 wt pct Si. While increases to Si content led to significant improvements in strengthening due to the precipitation of β 1 -Ni 3 Si, the silicide eutectics acted as crack nucleation sites during tensile loading which severely reduced ductility. The solidification cracking susceptibility of low-Si Monel alloys was found to be relatively low. However, increases to Si concentration and the onset of associated eutectic reactions increased the solidification temperature range and drastically reduced cracking resistance. Increases in the Cu and Mn concentrations were found to reduce the solubility limit of Si in austenite which promoted additional eutectic formation and exacerbated the reductions in ductility and/or weldability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mineralogical and isotopic constraints on early, high-temperature events and reservoirs recorded in the interior of a Type B Ca-Al-rich inclusion from the reduced CV3 chondrite Vigarano

A coordinated mineralogical and oxygen and Al-Mg isotopic study of a Type B Ca-Al-rich inclusion (CAI) from the reduced CV3 chondrite Vigarano was carried out using electron microprobe analysis, transmission electron microscopy, and secondary ion mass spectrometry. This CAI, a once molten igneous object, shows heterogeneous oxygen isotopic compositions among its constituent mineral phases. Spinel is uniformly 16 O-rich with Δ 17 O ≤ −23 ‰. The Δ 17 O values of Al,Ti-diopside in the CAI core range from −11 ‰ to −18 ‰, which are positively correlated with its TiO 2 contents, whereas diopside in the Wark–Lovering (WL) rim is 16 O-rich with Δ 17 O = −23 ‰. Melilite in the CAI mantle shows Δ 17 O values ≤ −10 ‰ only when Åk <15 but becomes more 16 O-poor (Δ 17 O = −3 ‰ to −9 ‰) when Åk >15 . These correlated chemical and oxygen isotopic variations were likely established during crystallization of melilite and Al,Ti-diopside from a partial melt, while spinel preserves the original 16 O-rich composition of the CAI precursor. We infer that a partial melt was isotopically evolving from 16 O-rich to 16 O-poor during melilite crystallization, then back to 16 O-rich during Al,Ti-diopside crystallization via exchange with different gas reservoirs of 16 O-poor and 16 O-rich compositions during heating event(s). Our Al-Mg isotopic measurements of the CAI core and mantle define a single isochron with an inferred initial 26 Al/ 27 Al ratio of (4.93 ± 0.18) × 10 −5 , indistinguishable from that of the WL rim. This indicates that multiple high-temperature events and oxygen isotope exchange with isotopically distinct gas reservoirs occurred rapidly during the CAI formation.

Al-Mg isotopic systematic↗
DOE OSTI2025

Fatigue life prediction of powder bed fused–laser beam AlSi10Mg: Incorporating critical defects via crystal plasticity modelling

The current study provides a microstructurally-based computational framework to predict the fatigue life of additive manufactured (AM), i.e., powder bed fused–laser beam (PBF-LB), AlSi10Mg specimens using the crystal plasticity finite element method (CPFEM). The fractography analysis, electron backscatter diffraction (EBSD), uniaxial and cyclic responses, and fatigue life of specimens were used to inform the computational framework. CPFE simulation was used to compute fatigue indicator parameters (FIPs) as fatigue driving forces. A new fatigue criterion is introduced based on FIPs, which was calibrated using experimental fatigue data. The proposed fatigue measure was evaluated versus the specimens with critical defects of various sizes and locations subjected to different stress amplitudes. The results show that the developed framework can capture the fatigue life of samples with different critical defect locations and sizes along with different stress amplitudes for both high-cycle fatigue (HCF) and very high-cycle fatigue (VHCF) regimes.

Additive manufacturing↗
DOE OSTI2025

Solving the “Coloring Problem” in InPd 3– x Ag x ( x = 0–0.7) by Phase Diagrams Modeling and Diffraction Experiments

Here, a series of InPd 3–x Ag x (x = 0–1) compositions were synthesized by conventional high-temperature synthesis, and as-synthesized samples were characterized by powder X-ray diffraction experiments. Up to x = 0.7, InPd 3–x Ag x adopts the ternary substitutional variant of the InPd 3 structure (TiAl 3 -type), when x > 0.7, elemental Ag starts to segregate along with the main phase. Accurate structural characterization in InPd 3–x Ag x faces a critical challenge due to the narrow X-ray scattering contrast among constituents In, Pd, and Ag and nearly identical neutron scattering lengths of Pd and Ag. To overcome this “coloring problem”, a combination of calculation of phase diagrams modeling (CALPHAD) and diffraction techniques (X-ray and neutron) was employed. In the compositional range 0 ≤ x ≤ 0.7, InPd 3–x Ag x presents a ternary variant of the TiAl 3 -type structure, where Ag atoms selectively substitute one (the 2b Wyckoff site) of the two Pd sites in InPd 3 . Notably, in contrast to the isologous InPd 3–x Cu x (x = 0–1) system, Ag substitution does not form an ordered VRh 2 Sn-type structure at the limiting composition. The distinct site preference in InPd 3–x Ag x is elucidated by charge population analysis, electronic structure calculations, and orbital-resolved chemical bonding investigations, and the extent of substitution is supported by formation free energy calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Automated TEM Reveals Intercrystalline Correlations of Conjugated Polymers

Transmission electron microscopy (TEM) continues to transform polymer science by revealing key aspects of chain packing, phase separation and nanoscale structure. The development of instrumentation and data analyses tools is driving the field forward and enabling new experiments. Here, we use automated high-resolution TEM (HRTEM) and image processing to identify the structure of a conjugated polymer used in organic electronics. Analysis of more than 600 HRTEM images reveals lattice parameters and orientation correlations between crystals, including the preferred alignment of neighboring crystals along the same crystallographic direction that is likely the result of liquid crystalline order.

Fair, Ryan A. [Pennsylvania State University, Univ↗
DOE OSTI2020

Displacement of carbon atoms in few-layer graphene

Molecular dynamics simulations were performed to study the susceptibility of carbon atom displacement under electron irradiation. The mapping of threshold displacement energies at different recoiling directions showed that the energies are very sensitive to the layer configurations and positions of neighboring atoms. Carbon atoms on the top and the bottom layers of few-layer graphene are most vulnerable to irradiation damage due to lack of constraints from the neighboring graphene layers. As indirect experiment evidence, transmission electron microscopy was performed on the edge of folded few-layer graphene, which made it possible to reveal “the inside” and compare irradiation tolerance of atoms at different layers, by using an electron analysis beam for both displacement creation and in situ characterization.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Anisotropy of the magnetic and transport properties of EuZn 2 As 2

Several recent studies have shown that the anisotropy in the magnetic structure of EuCd 2 As 2 plays a significant role in stabilizing the Weyl nodes. Therefore, to investigate the relationship between magnetic anisotropy and Weyl physics, we present a comparative study between EuZn 2 As 2 and EuCd 2 As 2 that are isostructural but with different magnetic anisotropy. We performed structural analysis, electronic transport, and magnetization experiments on millimeter-sized single crystals of EuZn 2 As 2 , and compared the results to those of EuCd 2 As 2 . By combining the first principle calculations and neutron diffraction experiment, we identify the magnetic ground state of EuZn 2 As 2 as A-type antiferromagnetic order with a transition temperature (T_N = 19.6 K) twice that of EuCd 2 As 2 . Like EuCd 2 As 2 , the negative magnetoresistance of EuZn 2 As 2 is observed after suppressing the resistivity peak at T_N with increasing fields. However, the anisotropy in both transport and magnetization are much reduced in EuZn 2 As 2 . The difference could be ascribed to the weaker spin-orbit coupling, more localized d orbitals, and a larger contribution from the Eu s orbitals in the zinc compound, as suggested by the electronic band calculations. The same band structure effect could be also responsible for the observation of a smaller nonlinear anomalous Hall effect in EuZn 2 As 2 compared to EuCd 2 As 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Reentrant polar phase induced by the ferroionic coupling in B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanoparticles

Using the model of four sublattices, the Landau-Ginzburg-Devonshire-Kittel phenomenological approach and the Stephenson-Highland ionic adsorption model for the description of coupled polar and antipolar long-range orders in ferroics, we analytically calculated the phase diagrams and polar properties of B⁢i 1−𝑥 ⁢S⁢m 𝑥⁢ Fe⁢O 3 nanoparticles covered by surface ions with dependence on their size, surface ions density, samarium content 𝑥 , and temperature. The size effects and ferroionic coupling govern the appearance and stability conditions of the long-range ordered ferroelectric, reentrant ferrielectric, and antiferroelectric phases in B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanoparticles. Calculated phase diagrams are in qualitative agreement with the x-ray diffraction phase analysis, electron paramagnetic resonance, infrared spectroscopy, and electrophysical measurements of B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanopowders sintered by the solution combustion method. The combined theoretical-experimental approach allows us to explain the influence of the ferroionic coupling and size effects in B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanoparticles on their polar properties.

antiferroelectricity↗
DOE OSTI2016

Ab initio prediction of superdense tetragonal and monoclinic polymorphs of carbon

The design and synthesis of three-dimensional denser carbons are one of the hot issues in condensed matter physics because of their fascinating properties. Here we identify by ab initio calculations several tetragonal and monoclinic polymorphs of carbon that adopt the t32, t32*, m32, and m32* structures in P4¯2 1 c, P4 3 2 1 2, P2 1 /c, and C2 symmetry, respectively. These carbon polymorphs have large 32-atom unit cells in all-sp 3 bonding networks comprising five- and six-membered rings that are dynamically stable, as verified by a phonon mode analysis. Electronic band structure calculations show that they are insulators with band gaps in the range of 5.19–5.41 eV, close to the calculated band gap of 5.34 eV for diamond. Remarkably, these carbon phases possess an extremely high atom number density exceeding that of diamond. Lastly, the present results establish different types of carbon phases and offer insights into their outstanding structural and electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Millikelvin-resolved ambient thermography

Thermography detects surface temperature and subsurface thermal activity of an object based on the Stefan-Boltzmann law. Impacts of the technology would be more far-reaching with finer thermal sensitivity, called noise-equivalent differential temperature (NEDT). Existing efforts to advance NEDT are all focused on improving registration of radiation signals with better cameras, driving the number close to the end of the roadmap at 20 to 40 mK. In this work, we take a distinct approach of sensitizing surface radiation against minute temperature variation of the object. The emissivity of the thermal imaging sensitizer (TIS) rises abruptly at a preprogrammed temperature, driven by a metal-insulator transition in cooperation with photonic resonance in the structure. The NEDT is refined by over 15 times with the TIS to achieve single-digit millikelvin resolution near room temperature, empowering ambient thermography for a broad range of applications such as in operando electronics analysis and early cancer screening.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Electrical Conductivity and Electrochemical Characteristics of Na{sub 3}V{sub 2}(PO{sub 4}){sub 3}-Based NASICON-Type Materials

NASICON-type materials with the compositions Na{sub 3}V{sub 2–x}Al{sub x}(PO{sub 4}){sub 3}, Na{sub 3}V{sub 2-} {sub x}Fe{sub x}(PO{sub 4}){sub 3}, Na{sub 3+} {sub x}V{sub 2–x}Ni{sub x}(PO{sub 4}){sub 3}, and Na{sub 3}V{sub 2-} {sub x}Cr{sub x}(PO{sub 4}){sub 3} (x = 0, 0.03, 0.05, and 0.1) have been prepared and characterized by X-ray diffraction analysis, electron microscopy, and impedance spectroscopy. The results demonstrate that the highest electrical conductivity among the samples studied is offered by the material doped with 5% Fe: Na{sub 3}V{sub 1.9}Fe{sub 0.1}(PO{sub 4}){sub 3}. The activation energy for low-temperature conduction in the doped materials decreases from 84 ± 2 to 54 ± 1 kJ/mol and that for high-temperature conduction is ~33 kJ/mol. The discharge capacity of Na{sub 3}V{sub 1.9}Fe{sub 0.1}(PO{sub 4}){sub 3}/C under typical working conditions of cathodes of sodium ion batteries has been shown to exceed that of Na{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C. The capacity of the more porous material prepared by the Pechini process (Na{sub 3}V{sub 1.9}Fe{sub 0.1}(PO{sub 4}){sub 3}/C-{II}) approaches the theoretical one at a low charge–discharge rate and retains its high level as the charge rate is raised (its discharge capacity was 117.6, 108.8, and 82.6 mAh/g at a discharge rate of 0.1C, 2C, and 8C, respectively).

25 ENERGY STORAGE↗
DOE OSTI2018

Effect of Conditions of Electrochemical Etching on the Morphological, Structural, and Optical Properties of Porous Gallium Arsenide

The properties of porous GaAs samples produced by the electrochemical etching of single-crystal n-GaAs(100) wafers are studied by X-ray diffraction analysis, electron microscopy, and infrared and ultraviolet spectroscopy. It is possible to show that, by choosing the composition of the electrolyte and the conditions of etching, samples can be produced not only with different degrees of porosity and pore sizes (nanopores/micropores), but with another type of sample surface as well. The etching of n-GaAs(100) wafers under the conditions chosen in the study does not change the orientation of the porous layer with respect to the orientation of the single-crystal GaAs(100) substrate. At the same time, etching induces a decrease in the half-width of the diffraction peak compared to that for the initial wafer, a splitting of the phonon mode in the infrared spectra and a partial shift of the components in accordance with the parameters of anodic etching, and a change in the optical properties in the ultraviolet region.

36 MATERIALS SCIENCE↗