Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics cooling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Kinetic modeling of hot tail runaway electron generation during plasma disruptions using the JOREK code

The generation of runaway electrons (REs) during disruptions poses a significant challenge for the operation of tokamaks. The production of these high-energy electrons can cause substantial damage, particularly when the plasma current is high, making it a critical concern for ITER. For the high-temperature plasmas anticipated in ITER, the primary generation of REs may be dominated by the hot tail mechanism, which consists of the acceleration of hot electrons from the pre-disruption population which have not yet thermalized with the bulk following the rapid cooling of the plasma. To account for the significant 3D effects on RE production, a hot tail modeling framework has been developed within the non-linear 3D extended MHD code JOREK. This paper presents the structure of this framework, which is based on test electrons evolving in MHD fields. The verification of the method shows good agreement with the reference DREAM code for 0D test cases, as well as for axisymmetric simulations of 15 MA ITER H-mode disruption scenarios. Furthermore, a proof-of-principle application to a DIII-D case demonstrates the framework’s capability to capture for the first time the hot tail generation in 3D MHD simulations in realistic geometry. Preliminary results suggest that the production of REs is significantly reduced by stochastic losses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Spin reorientations in structurally metastable, disordered, and hexagonal Cr 7 ⁢Te 8

Vapor deposited two-dimensional Cr 7 ⁢Te 8 displays unusual temperature dependent Hall effect properties, including a room-temperature anomalous Hall effect, sign reversals of the Hall resistivity on cooling, and a peak in the Hall resistivity at low temperatures. The two-dimensional Cr 7⁢ Te 8 heterostructures that form the basis of these measurements are hexagonal in structure. We study the magnetic and structural properties of bulk Cr 7 ⁢Te 8 synthesized by quenching from 1000⁢°C with the goal of relating the magnetic, structural, and electronic properties. This quenched phase is metastable, hexagonal, and displays different magnetic properties from the slow-cooled and more thermodynamically stable monoclinic phase. High-resolution x-ray diffraction of the quenched hexagonal phase finds a first-order transition to a lower symmetry monoclinic phase on heating above ∼550 K. Magnetic susceptibility measurements of the quenched hexagonal phase reveal ferromagnetic ordering above room temperature, along with the two distinct transitions at ∼220 K and ∼70 K. Through neutron diffraction studies, we find the ∼220 K anomaly is a spin reorientation transition of the ferromagnetically aligned magnetic moments and the ∼70K feature represents a transition from a high-temperature ferromagnet to a low-temperature antiferromagnet. We suggest that these magnetic transitions are related to changes in the unit-cell dimensions and are connected to the temperature-dependent Hall resisitivity studied in two-dimensional heterostructures. This implies a link between structural, magnetic, and electronic properties in the “pseudo” two-dimensional chromium tellurides.

Chemical synthesis↗
DOE OSTI2026

Influence of conical wire array geometry on plasma flow and temperature profiles of radiatively cooled jets

The influence of conical wire array geometry on the formation and dynamics of pulsed-power driven plasma jets is investigated. In the experiments, the jet becomes isolated from the inflows as it passes through an aperture, allowing the study of its intrinsic evolution for different conical angles. Here, our results show that, regardless of the array opening angle, the jets are supersonic, highly collisional, and exhibit an exponential axial density decay with a characteristic scale length of 𝐿 𝑛 ≈ 3 mm, significantly shorter than the overall length of the jet. In contrast, axial velocity systematically increases with larger array opening angles. The near invariance of the density profile is attributed to a compensating mechanism between geometric divergence and axial acceleration, consistent with an asymptotically steady flow regime. Additionally, temperature measurements reveal ion-electron thermal decoupling near the base of the jet, with equilibration downstream. Analysis of radiative cooling and collisional energy exchange timescales indicates that the plasma evolves in a radiatively stable regime and that the two-temperature profile is fully described by the competition between both methods. These findings provide valuable information into the internal structure and evolution of pulsed-power plasma jets in regimes dominated by geometric shaping and radiative cooling, demonstrating experimental control over flow acceleration and collimation relevant to both laboratory and astrophysical contexts.

Physics - Plasma physics↗
DOE OSTI2026

Structural Propensities in Cs2MBiX6 (M=Na, Ag; X=Cl, Br) Bismuth Halide Double Perovskites

A previously unreported low-temperature phase transition in the bismuth halide double perovskite Cs2AgBiCl6 is reported, thereby establishing trends in the structural ground state across Cs2NaBiCl6, Cs2AgBiCl6, and Cs2AgBiBr6. Using the combined toolkit of variable-temperature synchrotron X-ray and neutron powder diffraction, Raman spectroscopy, and density-functional theory–based electronic structure modeling, we demonstrate a cubic Fm¯3m → tetragonal I4/m transition upon cooling with distinct onset temperatures. Neutron powder diffraction refinements permit the unambiguously assignment of the low-temperature phase of Cs2NaBiCl6 to I4/m, correcting prior reports of an I4/mmm ground state. Cs2AgBiCl6 is also found to transforms to a structure crystallizing in the I4/m space group at low temperatures. Temperaturedependent Raman data and density-functional theory-based modeling capture the softening and freezing of out-of-phase octahedral-tilt modes and quantify relative instabilities. Solid-state nuclear magnetic resonance spectroscopy at room temperature completes the characterization and helps underpin the subtle differences in covalency across the compounds. Trends in the phase transition temperature Ts and tilt magnitudes emerge from coupled effects of halide identity, M(I)–site bonding character, and a mismatch between interatomic distances. These results establish the structure– dynamics–bonding framework for tuning tilt-driven instabilities in halide double perovskites.

Tian, Haowen↗
DOE OSTI2025

Magnetic Phase Diagram of 2D Magnet Fe 5– x GeTe 2 Revealed by Cryogenic Lorentz 4D-STEM

A two-dimensional van der Waals ferromagnet Fe 5–x GeTe 2 (F5GT) exhibits room-temperature magnetic transition and magnetic anisotropy. Studies have identified diverse magnetic states, including stripe domains, skyrmionic type-I and topologically trivial type-II bubbles, depending on the magnetic and thermal history. Yet, the underlying micromagnetic energetics driving these states remains unclear. Here, we establish the magnetic phase diagram of bulk F5GT using cryogenic Lorentz four-dimensional scanning transmission electron microscopy. We reveal that stripe domains spontaneously form upon zero-field cooling, while metastable magnetic bubbles are stabilized by external fields. Transitions from type-I to type-II bubbles are driven by an oblique external field. Micromagnetic simulations confirm that these transitions arise from the interplay of uniaxial anisotropy, dipolar interactions, and external fields, without requiring significant Dzyaloshinskii–Moriya Interaction (DMI). In conclusion, these findings clarify the micromagnetic origin of spin textures of F5GT and establish it as a tunable platform for nanoscale topological magnetism.

2D Magnets↗
DOE OSTI2026

Weibel-mediated filamentary structures observed in the ICF context

Here, in light of novel and past experimental results, we demonstrate how Weibel-mediated filamentary structures can develop in the expanding plasma plume of a laser-irradiated foil. The transverse ballistic cooling that occurs during the quasi-spherical plasma expansion naturally drives an electron pressure anisotropy, resulting in the growth of electron current filaments. This effect competes with electron–ion Coulomb collisions, which tend to isotropize the electron distribution function. Based on theoretical and particle-in-cell modeling, we provide estimates of the dominant wavelength and amplitude of the self-generated magnetic fluctuations, which are found to explain experimental data obtained at the OMEGA and Laser Megajoule facilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Selection of Target Thickness and Size of Drive Electron Beam for Ce+BAF Injector

A baseline concept for a continuous wave (CW) polarized positron injector was developed for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab. This concept is based on the generation of CW longitudinally polarized positrons by a high-current, polarized electron beam (1 mA, 130-370 MeV, and 90% longitudinal polarization) that passes through a rotating, water-cooled, tungsten target. The positron yield and longitudinal polarization are calculated for the 123 MeV Ce+BAF injector at the Low Energy Recirculator Facility (LERF). The longitudinal and transverse CEBAF acceptances, defined as an energy spread of less than 1% and a normalized emittance of less than 100 mm·mrad, have been used in these calculations. The impact of target thickness, transverse electron beam size, and electron beam energy on the yield and polarization of a positron injector is evaluated. The total energy deposited by the beams in the tungsten target and the peak energy density are calculated for different target thicknesses, electron beam sizes, and energies.

Ushakov, Andriy [Thomas Jefferson National Acceler↗
DOE OSTI2025

CdSe Magic-Size Clusters Deviate from Nanocrystal-Size Scalings for Ultrafast Intraband Relaxation and Auger Recombination

The cluster regime of colloidal semiconductor quantum dots (QDs) occupies an interesting space on the continuum from molecule to bulk material and allow the study of QD properties at extreme quantum confinement limits. For typical QDs, several size-dependent property trends are well established including intraband relaxation rates and universal scaling of Auger recombination with particle volume. Advances in synthesis now allow isolation of atomically precise semiconductor magic-size clusters (MCs), which offer experimental insight regarding how electronic structure changes with particle size in the ultrasmall limit. Here, we report intraband cooling and Auger recombination for several stable CdSe MCs as a function of particle size and observe deviation from QD response in the cluster regime. We additionally show optical signatures ascribed to transient disordering 2 that appear in the single exciton regime for MCs, which point to complexities regarding their implementation.

Auger recombination↗
DOE OSTI2024

RF AND MECHANICAL DESIGN OF A 915 MHz SRF CAVITY FOR CONDUCTION-COOLED CRYOMODULES

Conduction-cooled SRF niobium cavities are being developed for use in compact, continuous-wave electron linear accelerators for a variety of industrial applications. A 915MHz two-cell cavity has been designed to achieve an energy gain of 3.5 MeV. The design of the cell shape aims at minimizing the peak surface magnetic field. Field flatness is achieved by adjusting the length of the outer end half-cells. The higher-order mode analysis shows that absorbers are not required for a moderate beam current of 5 mA. One of the beam tubes has two side-ports for insertion of coaxial fundamental power couplers. The mechanical design and analysis were done to maintain a stress near or less than 15.5 MPa for all anticipated loading conditions. This is half the measured yield strength and is to provide relief from creep when cavity is evacuated and stored with outside atmospheric pressure.

Ciovati, Gianluigi↗
DOE OSTI2024

RF and Mechanical Design of a 915 MHz SRF Cavity for Conduction-Cooled Cryomodules

Conduction-cooled SRF niobium cavities are being developed for use in compact, continuous-wave electron linear accelerators for a variety of industrial applications. A 915 MHz two-cell cavity has been designed to achieve an energy gain of 3.5 MeV. The design of the cell shape aims at minimizing the peak surface magnetic field. Field flatness is achieved by adjusting the length of the outer end half-cells. The higher-order mode analysis shows that absorbers are not required for a moderate beam current of 5 mA. One of the beam tubes has two side-ports for insertion of coaxial fundamental power couplers. The mechanical design and analysis were done to maintain a stress near or less than 15.5 MPa for all anticipated loading conditions. This is half the measured yield strength and is to provide relief from creep when cavity is evacuated and stored with outside atmospheric pressure.

Ciovati, Gianluigi↗
DOE OSTI2026

Positron Injector for Ce+BAF

A baseline concept for a continuous wave (CW) polarized positron injector was developed for the CEBAF at Jefferson Lab. This concept is based on the generation of CW longitudinally polarized positrons by a high-current, polarized electron beam 1 mA, 130-370 MeV, and 90% longitudinal polarization that passes through a rotating, water-cooled, tungsten target. The simulations for the Ce+BAF injector at the Low Energy Recirculator Facility (LERF) are performed, including positron beam generation, capture, energy selection, and acceleration to 123 MeV. The positron yield (or positron current) and longitudinal polarization are calculated considering the longitudinal and transverse CEBAF acceptances (<1% energy spread, 1.2 mm bunch length and normalized emittance of 100 mm·mrad). The impact of target thickness, electron beam energy, and transverse size on positron yield within the required emittance limit is evaluated. Target thermal and structural FEM analyses (ANSYS Fluent) are performed to determine the maximum electron beam current and minimum transverse beam size on the target.

Benesch, Jay [Thomas Jefferson National Accelerato↗
DOE OSTI2026

Simulations of positron injector for Ce+BAF

A baseline concept for a continuous wave (CW) polarized positron injector was developed for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab. This concept is based on the generation of CW longitudinally polarized positrons by a high-current, polarized electron beam (1 mA, 130‑370 MeV, and 90% longitudinal polarization) that passes through a rotating, water-cooled, tungsten target. The simulation results for the Ce+BAF injector at the Low Energy Recirculator Facility (LERF) are presented, including positron beam generation, capture, energy selection, and acceleration to 123 MeV. The positron yield (or positron current) and longitudinal polarization are calculated considering the longitudinal and transverse CEBAF acceptances (<1% energy spread, <1 mm bunch length and normalized emittance of <100 mm mrad). The impact of target thickness, drive electron beam energy, and transverse size on positron yield within the required emittance limit is evaluated.

Accelerator Physics↗
DOE OSTI2026

Ligand Control of Ultrafast Hot-Carrier Cooling in CdSe Quantum Dots by a Coherent Nonadiabatic Mechanism

Using the results from global modeling of the broadband two-dimensional electronic spectrum and an analysis of the concurrent damping of excited-state vibronic coherences, we show herein that a coherent nonadiabatic mechanism converts the electronic excitation energy of the X3 (1P 3/2 –1P e ) exciton state to ligand vibrations on the <50 fs time scale in oleate- and hexadecylamine-capped CdSe quantum dots. A comparison of the rates for the two ligands suggests that this process is promoted by mid-frequency vibrations of the ligands due to modulation of their electron-donating tendency. An intramolecular vibrational redistribution process then follows on the ∼200 fs time scale with both ligands, which accompanies thermalization in the band-edge X1 (1S 3/2 –1S e ) state and dephasing of the spectator ligand vibrations. These findings suggest that charge-separated intermediates associated with photoinduced charge transfer or triplet–triplet excitation energy transfer will be produced with retention of phase coherence in the vibrations that modulate the charge-transfer character of surface-bound organic acceptors.

14 SOLAR ENERGY↗
DOE OSTI2025

Understanding Oxide–Metal Interactions During Hot Isostatic Pressing to Diffusion Bond Aluminum Alloy 6061 Plates

The interaction between Mg, Si, and Al 2 O 3 during hot isostatic pressing diffusion bonding of aluminum alloy 6061 (AA6061) plates was investigated through thermodynamic calculations and experimental microstructural characterization. Thermodynamic calculations as functions of temperature, pressure, and composition revealed that the interaction among Mg, Si, and Al 2 O 3 yields Mg 2 Si and either MgO + Al or MgAl 2 O 4 + Al, facilitating the reduction of Al 2 O 3 and allowing Al/Al metallic bonds to form. Total pressure variation had a negligible influence on the oxygen partial pressure, and consequently, the reaction product formation. Oxygen partial pressure variation as a function of temperature and initial amount of Al 2 O 3 determined the formation of either MgO or MgAl 2 O 4 . Experimental Hot Isostatic Pressure (HIP) bonding at 723 K and 833 K under a constant pressure of 1017 atm documented the cooling rate-dependent formation of β–Mg 2 Si precipitates. High-resolution transmission electron microscopy imaging and selected area electron diffraction patterns verified the formation of β–Mg 2 Si and MgO at the interface but did not detect MgAl 2 O 4 . In conclusion, findings from this study clarify the role of thermochemical interactions in oxide disruption and bonding mechanisms during HIP diffusion bonding of AA6061 and provide guidance for optimizing joining processes for monolithic nuclear fuel assemblies.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Modular Coaxial Power Converter for High-Density Integration into Medium-Voltage Cables

This work proposes to combine the functionality benefits of power electronics with the power density benefits of medium-voltage cables to create a streamlined, high-density power electronics solution that seamlessly integrates with medium-voltage cables. Located at the ends of a medium- or high-voltage line, the proposed converter uses a cascade of coaxial power conversion cells to gradually step down the voltage, and excels in high step-down applications. By mimicking the coaxial geometry of medium-voltage cables, the converter preserves the axisymmetric electric field of the cable which, when combined with a solid insulating dielectric, provides a voltage scaling advantage over conventional planar and PCB-based converter solutions. Similar to medium voltage cables, the converter is fully passively cooled. A passive cooling strategy allows for combined installation with existing medium voltage cable systems without the added cost, maintenance needs, infrastructure, and reliability concerns associated with active cooling systems. The scalability of the modular structure in combination with the integration benefits provide a flexible power electronics system that can adapt to the evolving demands of the grid.

coaxial power conversion cells↗
DOE OSTI2024

Wehnelt photoemission in an ultrafast electron microscope: Stability and usability

We tested and compared the stability and usability of three different cathode materials and configurations in a thermionic-based ultrafast electron microscope: (1) on-axis thermionic and photoemission from a custom 100 μm diameter LaB 6 source with a graphite guard ring, (2) off-axis photoemission from the Ni aperture surface of the Wehnelt electrode, and (3) on-axis thermionic and photoemission from a custom 200 μm diameter polycrystalline Ta source. For each cathode type and configuration, including the Ni Wehnelt aperture, we illustrate how the photoelectron beam-current stability is deleteriously impacted by simultaneous cooling of the source following thermionic heating. Furthermore, we demonstrate usability via collection of parallel- and convergent-beam electron diffraction patterns and by formation of the optimum probe size. We find that usability of the off-axis Ni Wehnelt-aperture photoemission is at least comparable to on-axis LaB 6 thermionic emission, as well as to on-axis photoemission [the heretofore conventional approach to ultrafast electron microscopy (UEM) in thermionic-based instruments]. However, the stability and achievable beam currents for off-axis photoemission from the Wehnelt aperture were superior to that of the other cathode types and configurations, regardless of the electron-emission mechanism. Beam-current stability for this configuration was found to be ±1% (one standard deviation from the mean) for 70 min (longest duration tested), and steady-state beam current was reached within the sampling-time resolution used here (~1 s) for 15 pA beam currents (i.e., 460 electrons per packet for a 200 kHz repetition rate). Repeatability and robustness of the steady-state condition were also found to be within ±1% of the mean. We discuss the implications of these findings for UEM imaging and diffraction experiments, for pulsed-beam damage measurements, and for practical switching between optimum conventional TEM and UEM operation within the same instrument.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Tungsten control in long pulse operation: feedback from WEST to ITER

The full W environment that is now foreseen for ITER puts strong emphasis on experimental results obtained in present devices in similar conditions. In this context, the WEST tokamak is well equipped to bring key contributions to the preparation of ITER operation, thanks to its capability to perform long pulses in dominant electron heating, torque-free scheme based on RF systems, and its ITER-grade actively cooled divertor. Recent results of interest cover the understanding of tungsten contamination and the evaluation of conditioning methods, the feedback on the current ramp-up phase, and the ageing of the ITER divertor components in L-mode attached condition. Further, new directions are being explored, in particular low divertor temperature operation that should be the normal operating regime of ITER. We also report on tungsten peaking physics, and the role of light impurity content.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

An integrated approach to examine fuel-cladding chemical interaction in HT9/U-10Zr metallic fast reactor fuels: Coupling machine learning with electron microscopy and local mechanical properties analysis

The metallic U-Zr nuclear fuel alloy has garnered renewed interest as a promising candidate for next-generation sodium-cooled fast reactors. Recent studies and technology assessments have identified several areas requiring improvements, enhanced knowledge, and reliable data to strengthen the U-Zr fuel design basis for qualification and commercial applications. One of the most challenging phenomena impacting this fuel system’s performance is fuel-cladding chemical interaction (FCCI). This work aimed to harvest FCCI data by examining selected HT9/U-10Zr (wt. %) fuel samples of prototypic full-length fuel pins through an integrated approach. This approach integrated scanning electron microscopy (SEM) microstructure characterization with localized mechanical properties examination to deepen understanding of FCCI phenomenon in HT9/U-10Zr fuel system. Particularly, this study focused on MFF fuel pins irradiated at Fast Flux Test Facility (FFTF), which aimed to qualify metallic fuel as a driver fuel for FFTF and to assess its viability for larger-scale fast reactors. Electron microscopy provided high confidence in detecting and distinguishing the different FCCI layers, while small-scale mechanical testing (SSMT) probed the mechanical properties of these layers. SEM examination of a MFF-2 pin 192167, with a time averaged inner cladding temperature (TICT) slightly over 500°C, revealed minimal cladding-side FCCI (cladding wastage). In contrast, significantly thicker cladding wastage comprising two distinct sublayers was observed in samples from the thermally hot MFF-3 pin 193045 and MFF-5 pin 195011 where the TICT ranged from 610-635°C. SSMT indicated complete embrittlement in the sublayer adjacent to the fuel and a tendency toward embrittlement in the other sublayer. Additionally, a new machine learning method was developed, validated, and used to quantify cladding wastage thickness. The machine learning method reliably predicted the wastage thickness across various fuel pins and sample cross-sections. Furthermore, the available cladding wastage data from HT9/U-10Zr fuel system demonstrated a strong temperature dependency. However, the dataset remains small, and ongoing research activities are essential to further understand the FCCI phenomenon and develop a reliable FCCI model for enhanced fuel performance simulation under various conditions.

36 - MATERIALS SCIENCE↗