Search NASA⌕ Search

SEARCH · Search NASA

Results for “elevated temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

AlScO 3 perovskite—An ~8 eV bandgap oxide predicted to exhibit low small hole polaron ionization energies and p -type conductivity at elevated temperatures

Here, we investigate electronic structure and dopability of an ultrawide bandgap (UWBG) AlScO 3 perovskite, a known high-pressure and long-lived metastable oxide. From first-principles electronic structure calculations, HSE06(+G 0 W 0 ), we find this material to exhibit an indirect bandgap of around 8.0 eV. Defect calculations point to cation and oxygen vacancies as the dominant intrinsic point defects limiting extrinsic doping. While acceptor behaving Al and Sc vacancies prevent n-type doping, oxygen vacancies permit the Fermi energy to reach ~0.3 eV above the valence band maximum, rendering AlScO 3 p-type dopable. Furthermore, we find that both Mg and Zn could serve as extrinsic p-type dopants. Specifically, Mg is predicted to have achievable net acceptor concentrations of ~10 17 cm -3 with ionization energy of bound small hole polarons of ~0.49 eV and free ones below 0.1 eV. These values place AlScO 3 among the UWBG oxides with lowest bound small hole polaron ionization energies, which, as we find, is likely due to large ionic dielectric constant that correlates well with low hole polaron ionization energies across various UWBG oxides.

14 SOLAR ENERGY↗
DOE OSTI2026

Lattice anharmonicity effects in fluorite oxide single crystals and anomalous increase in phonon lifetime in ceria at elevated temperature

Here, we investigate the temperature dependence of the frequency and linewidth of the triply degenerate T 2g zone-centered optical phonon in flux-grown ceria and hydrothermally synthesized thoria single crystals from room temperature to 1273 K using Raman spectroscopy. Both crystals exhibit an expected increase in the phonon linewidth with temperature due to enhanced phonon–phonon scattering. However, ceria displays an anomalous linewidth reduction in the temperature range of 1023–1123 K. First-principles phonon linewidth calculations considering cubic and quartic phonon interactions within temperature-independent phonon dispersion fail to describe this anomaly. A parameterization of the temperature-dependent second-order interatomic force constants based on previously reported phonon dispersion measured at room and high temperatures predicts a deviation from the monotonic linewidth increase, albeit at temperatures lower than those observed experimentally for ceria. The qualitative agreement in the trend of temperature-dependent linewidth suggests that lattice anharmonicity-induced phonon renormalization plays a role in phonon lifetime. Specifically, a change in the overlap between softened acoustic and optical branches in the dispersion curve reduces the available phonon scattering phase space of the Raman-active mode at the zone center, leading to an increased phonon lifetime within a narrow temperature interval. These findings provide insights into higher-order anharmonic interactions in ceria and thoria, motivating further investigations into the role of anharmonicity-induced phonon renormalization on phonon lifetimes at high temperatures.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

An in-situ conductometric apparatus for physicochemical characterization of solutions and in-line monitoring of separation processes at elevated temperatures and pressures

Specific conductance and frequency-dependent resistance (impedance) data are widely utilized for understanding the physicochemical characteristics of aqueous and non-aqueous fluids and for evaluating the performance of chemical processes. However, the implementation of such an in-situ probe in high-temperature and high-pressure environments is not trivial. This work provides a description of both the hardware and software associated with implementing a parallel-type in-situ electrochemical sensor. The sensor can be used for in-line monitoring of thermal desalination processes and for impedance measurements in fluids at high temperature and pressure. Further, a comparison between the experimental measurements on the specific conductance in aqueous sodium chloride solutions and the conductance model demonstrate that the methodology yields reasonable agreement with both the model and literature data. A combination of hardware components, a software-based correction for experimental artifacts, and computational fluid dynamics (CFD) calculations used in this work provide a sound basis for implementing such in-situ electrochemical sensors to measure frequency-dependent resistance spectra.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Study of interface reaction in a B 4 C/Cr mirror at elevated temperature using soft X-ray reflectivity

Boron carbide is a prominent material for high-brilliance synchrotron optics as it remains stable up to very high temperatures. The present study shows a significant change taking place at 550°C in the buried interface region formed between the Cr adhesive layer and the native oxide layer present on the silicon substrate. An in situ annealing study is carried out at the Indus-1 Reflectivity beamline from room temperature to 550°C (100°C steps). The studied sample is a mirror-like boron carbide thin film of 400 Å thickness deposited with an adhesive layer of 20 Å Cr on a silicon substrate. The corresponding changes in the film structure are recorded using angle-dependent soft X-ray reflectivity measurements carried out in the region of the boron K-edge after each annealing temperature. Analyses performed using the Parratt recursive formalism reveal that the top boron carbide layer remains intact but interface reactions take place in the buried Cr–SiO2 region. After 300°C the Cr layer diffuses towards the substrate. At higher temperatures of 500°C and 550°C the Cr reacts with the native oxide layer and tends to form a low-density compound of chromium oxysilicide (CrSiOx). Depth profiling of Si and Cr distributions obtained from secondary ion mass spectroscopy measurements corroborate the layer model obtained from the soft X-ray reflectivity analyses. Details of the interface reaction taking place near the substrate region of boron carbide/Cr sample are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Sequential versus Simultaneous Aging of XLPE Nuclear Cable Insulation Subjected to Elevated Temperature and Gamma Radiation

Electrical cables constitute a critical component of nuclear power generation. The aging behavior of electrical cable insulation under combined exposure to thermal and radiation stress is not additive, complicating lifetime prediction of cable performance based on sequential accelerated aging. In this work we explore the relative effects of simultaneous and sequential thermal and gamma radiation aging on cross-linked polyethylene (XLPE), which is commonly found in commercial nuclear power plants in the United States. Samples of XLPE were subjected to up to 320 kGy of gamma irradiation at a dose rate of 300 Gy/hr in two heating scenarios. In the first, simultaneously-aged samples were heated at 150°C during irradiation. In the second, sequentially aged samples were heated at 150°C for designated durations followed by corresponding periods of irradiation without heating. The mass, total color difference, and density were characterized to quantify aging of the insulation polymer. Sequential aging is hypothesized to be more damaging to XLPE insulation due to an increased trend in mass gain, total color difference, and density.

Cross-linked polyethylene, XLPE, nuclear cable, ac↗
DOE OSTI2023

Oxidation performance and limitations of additively manufactured SiC/Si-O-C composites at elevated temperatures

Here, SiC preforms were infiltrated with polycarbosiloxane preceramic polymer to create low-cost SiC—Si x O y C z matrix composites for possible high temperature application. The effect of specimen annealing conditions on the steam and air oxidation resistance was analyzed. Air exposures from 900–1500°C showed stability of the Si x O y C z matrix phase with moderate oxidation resistance. After 900°C exposures, oxidation of the composite is primarily limited to the matrix phase, and only at 1200 and 1500°C was SiC consumption visualized. Steam cycle exposures at 1200°C resulted in rapid linear oxidation of the composites with induced specimen swelling from volume expansion associated with internal oxidation. Specimens annealed in argon were found to be the most oxidation resistant due to increased matrix crystallinity and carbon retention. The results of this work were used to develop clear strategies for improving the high-temperature properties of SiC—Si x O y C z composites.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Insights into the thermo-hydraulic properties of compacted MX80 bentonite during hydration under elevated temperature

In high-level radioactive waste geological repositories, compacted bentonite undergoes coupled thermo-hydraulic processes due to heat released from a central waste canister and groundwater imbibition from the surrounding host rock. An understanding of these processes is essential for long-term simulations of radionuclide migration and canister corrosion, which requires an understanding of temperature effects on the coupled thermo-hydraulic properties governing these processes. In this study, a tank-scale radial infiltration test was used to investigate water imbibition processes in compacted bentonite under a central heater temperature of 200 °C that simulates high thermal gradients in a repository. Interpretation of this test focuses on evaluation of the liquid water wetting front during hydration and the interpretation of the temperature-dependent transient soil water retention curve (SWRC), thermal conductivity function (TCF), and hydraulic conductivity function (HCF). The SWRC during imbibition follows a temperature-dependent wetting path. Temperature effects on the hydraulic conductivity of bentonite in saturated conditions had the greatest effect on the shape of the HCF, with minimal temperature effects at higher suctions. The transient thermal conductivity data matched well with a new TCF linked with the SWRC shape. Although the bentonite layer was restrained, local deformations during hydration may have affected the shapes of the TCF and HCF.

Engineering↗
DOE OSTI2020

Evaluation of the Tenti S6 model for hydrocarbon fuels at elevated temperatures using filtered Rayleigh scattering measurements

This Letter targets the assessment of the well-known Tenti S6 model for predicting the Rayleigh–Brillouin scattering (RBS) spectra of select gas–phase hydrocarbon fuels (CH 4 , C 2 H 2 , C 2 H 4 , C 3 H 8 , and C 4 H 10 ) over a temperature range of 300 to 700 K. The Tenti S6 model is evaluated by comparing filtered Rayleigh scattering (FRS) measurements to synthetic FRS signals generated from the combination of the Tenti S6 output and an accurate iodine absorption filter model. Here, the experimental and synthetic FRS results agree very well (<3% difference) over the full temperature range for CH 4 , C 2 H 2 , and C 2 H 4 , indicating accurate calculation of the RBS spectra. For C 3 H 8 and C 4 H 10 , there are some large differences between the experimental and synthetic FRS results which cannot be resolved through tuning of bulk viscosity, internal heat capacity, or inclusion of vibrational degrees of freedom, suggesting the need for detailed measurements of the Rayleigh–Brillouin spectra.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Utah FORGE: Fluid Injection Induced Shearing Experiments on Fractured Granitoid at Elevated Temperatures

This repository contains experimental data from a series of fluid injection-induced shearing tests conducted on Utah FORGE granitoid. The experiments were performed using an aluminum triaxial pressure vessel (TEMCO) apparatus at Pennsylvania State University. The primary aim was to investigate the impact of temperature on fault seismicity and to explore how different pre-stress ratios influence shearing behavior. The data includes results from experiments conducted under varying conditions of temperature, pre-stress ratios, and pore pressure increments. The rock samples used in these experiments were 60-grit granitoid with a single inclined fracture oriented at 60 degrees with respect to the horizontal cross-section. The dataset also includes measurements of normal stiffness at different temperatures and images of the experimental apparatus. The included README file details each experiential setup and outlines which data files represent which experimental conditions.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

Influence of Nanoconfinement and Elevated Temperatures on Geocolloid-Facilitated Transport of Energy related Contaminants

Fossil fuels obtained using hydraulic fracturing and nuclear energy are deemed crucial for meeting the current and future energy demands of the United States. The utilization of these resources, especially fossil fuels from hydraulic fracturing, has increased rapidly within the last decade. However, with the increasing levels of hydraulic fracturing activities, the occurrence and fate of chemicals used in these processes in the geosystem, as well as the potential consequences of their interactions with environment and geosystems (e.g. mineral-based geocolloids and geosurfaces), have been increasingly recognized as issues warranting consideration owing to the toxic nature of these chemicals. Scientific results originated from this project has brought better understandings on how such contaminants can preferentially or adversely interact with geosystems and how geocolloids can facilitate their transport by realistically mimicking geological conditions and environments in the laboratory level for the first time. Based on such knowledge, it may eventually lead to the development of mitigation strategies for reducing and minimizing the transport and wide distribution of contaminants and pollutants. This aspect is important for the society to ensure that energy-related contaminants do not find their way to waterbodies that are used as drinking water or irrigation. The project is also anticipated to increase public awareness about potential adverse effects of energy systems on the geosphere and environment and may motivate society to consider better mitigation strategies to prevent such occurrences.

(Nano)Confinement↗
DOE OSTI2023

Investigation of oxygen ion mobility through Zr x Ta 2 O 2x+5 (ZTOx) and Hf 6 Ta 2 O 17 (HTO) at elevated temperatures

Thermal Protection Systems (TPS) allow for technology to withstand high heat, which is especially critical for aerospace applications. As technology advances, better TPS are required to keep up with more extreme operating temperatures. Ultra-High Temperature Ceramics (UHTCs) are of interest because of their high melting points above 3000°C, but they suffer from oxidation when exposed to the atmosphere. A standard remedy to prevent oxidation is the use an oxide coating to shield from oxygen in the atmosphere while still allowing high operating temperatures and thermal cycling. However, standard oxide coatings such as yttria stabilized zirconia (YSZ) have limited operating temperatures before they allow oxygen to diffuse into the substrate material. A recently proposed alternative material has the formula A 6 B 2 O 17 (A: Zr or Hf) (B: Ta or Nb). In this study, determination of the oxygen protection ability of Hf 6 Ta 2 O 17 (HTO), Zr 6 Ta 2 O 17 (ZTO6), and various Zr x Ta 2 O 2x+5 (ZTOx) was determined using Electrochemical Impedance Spectroscopy (EIS). Optimal synthesis and sintering conditions were determined for ZTO6 and several of its ZTO variations. Activation energy for oxygen mobility was also determined. The importance of ball milling was found to be crucial to achieve high sintering density with these ceramics. The sintering study revealed that the ideal temperature of the ZTO variations increased with increased Zr/Ta ratio in the formulation. It was determined that both HTO and the ZTO variations conduct oxygen ions less than current ceramic coatings such as YSZ, with HTO conducting the least, with results confirming the validity of both HTO and ZTO materials as candidates for TPS coatings based on their low oxygen ion conductivity.

36 MATERIALS SCIENCE↗