SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This report uses Sankey type diagrams to illustrates energy use and CO2 generation within the U.S. for the year 2020. The diagrams show primary energy consumption from coal, natural gas, nuclear, petroleum, and renewables for the electric, residential, commercial, industrial, and transportation sectors, fossil fuel trade/domestic production, and CO2 generation by fuel and end user.
This DOE Basic Energy Physical Biosciences project spanned a 28-year period and two project investigators. Numerous significant research discoveries have occurred over this time frame. Much of this work has been reported in peer-reviewed literature, with the publication of results from the last four years forthcoming. The overarching project themes have focused on probing the metabolism of syntrophic bacteria and their environments. Research supported by this project has been central to ten doctoral dissertations and one master’s thesis at the University of Oklahoma. The project has also supported numerous undergraduate research projects throughout the years. Additionally, several microbial genomes were sequenced and annotated in association with this work 12-16. Key findings and publications from this work are highlighted. More detailed results are provided for unpublished and embargoed work. A complete list of publications and research products associated with this project is at the report's end.
This report describes the emissions of airborne radionuclides from operations at Los Alamos National Laboratory (LANL) for calendar year 2022 and the resulting off-site dose from these emissions. This document fulfills the requirements established by the National Emissions Standards for Hazardous Air Pollutants in 40 CFR 61, Subpart H – Emissions of Radionuclides other than Radon from Department of Energy Facilities, commonly referred to as the Radionuclide NESHAP or Rad-NESHAP. Compliance with this regulation and preparation of this document is the responsibility of LANL’s Rad NESHAP compliance program, which is part of the Environmental Protection and Compliance (EPC) Division. The information in this report is required under the Clean Air Act and is being submitted to the U.S. Environmental Protection Agency (EPA) Headquarters and EPA Region 6. The highest effective dose equivalent (EDE) to an off-site member of the public was calculated using procedures specified by the EPA and described in this report. LANL’s EDE was 0.45 for 2022. The annual limit is 10 millirem per year, established by the EPA in 40 CFR 61 Subpart H. All measured air emissions are modeled to a single location, known as the Maximally Exposed Individual (MEI). During calendar year 2022, LANL continuously monitored radionuclide emissions at 27 “major” release points, or stacks. The Laboratory estimates emissions from an additional 34 “minor” release points using radionuclide usage source terms in lieu of stack monitoring. Also, LANL uses an EPA approved network of air samplers around the Laboratory perimeter to monitor ambient airborne levels of radionuclides. To provide data for dispersion modeling and dose assessment, LANL maintains and operates several meteorological monitoring towers. From these various systems, a comprehensive evaluation is conducted to calculate the MEI dose for the Laboratory. The MEI can be any member of the public at any off-site location where there is a residence, school, business, or office. In 2022, this MEI location was a business at 95 Entrada Drive, located in the eastern end of Los Alamos town site. The primary contributors to the off-site dose at this location are the ambient air data at that location combined with radioactive gas emissions from the LANSCE facility and the collected potential emissions from unmonitored (minor) sources. Overall, the MEI dose in 2022 is similar to that which has been observed in recent years, and it remains well below the EPA’s 10 millirem per year limit. Doses reported to the EPA for the past 10 years are shown in Table E1.
This report identified some of the important requirements that needs to be taken into consideration as part of the data evolution for the CBM application of a CWS in a NPP. In the data evolution process, the information is converted into insight leading into actions using advancements in AI/ML technologies. A notion of RESET AI: design, development, deployment, and operation principals are introduced to lifecycle of AI technologies. Towards the end of the report, we discussed how this CBM can be realized in a SDE. As path forward, this report lays the foundation for developing a more detailed industry guidance supporting data evolution for other plant applications like operations and plant support. These would be developed as part of ongoing research in the fiscal year 2023.
Coal generation currently accounts for approximately 19.5 percent of electricity generated in the United States, down from 51.7 percent of the generation mix in 2000. In 2023, the EIA expects 8.9 gigawatts (GW) of planned retirements of coal-fired capacity. Many of the coal-fired power plant retirements that have already occurred or are planned for the next decade will be plants that have not yet reached the end of their useful life, and are therefore not fully depreciated. Ensuring that utility customers do not face an undue burden in paying for these stranded assets will become an increasingly important issue over the next few years for PUCs overseeing the safety, reliability, and affordability of investor-owned utility service. This report reviews the role that securitization can play in reducing the costs associated with stranded assets due to early coal plant retirements.
This report uses Sankey type diagrams to illustrates energy use and CO 2 generation within the U.S. for the year 2020. The diagrams show primary energy consumption from coal, natural gas, nuclear, petroleum, and renewables for the electric, residential, commercial, industrial, and transportation sectors, fossil fuel trade/domestic production, and CO 2 generation by fuel and end user.
This report uses Sankey type diagrams to illustrates energy use and CO 2 generation within the U.S. for the year 2022. The diagrams show primary energy consumption from coal, natural gas, nuclear, petroleum, and renewables for the electric, residential, commercial, industrial, and transportation sectors, fossil fuel trade/domestic production, and CO 2 generation by fuel and end user.
This illustrative report uses Sankey type diagrams to illustrates energy use and CO 2 generation within the U.S. for the year 2023. The diagrams show primary energy consumption from coal, natural gas, nuclear, petroleum, and renewables for the electric, residential, commercial, industrial, and transportation sectors; fossil fuel trade/domestic production; and CO 2 generation by fuel and end user.
This illustrative report uses Sankey type diagrams to illustrates energy use and CO 2 generation within the U.S. for the year 2024. The diagrams show primary energy consumption from coal, natural gas, nuclear, petroleum, and renewables for the electric, residential, commercial, industrial, and transportation sectors; fossil fuel trade/domestic production; and CO 2 generation by fuel and end use.
This report provides summary information on experiments performed in the Transient Reactor Test Facility (TREAT) during its original operation from 1959-1994, and more specifically, before the TREAT core was upgraded at the end of the 1980s. The tests performed since about 1970 are summarized in considerable detail. Earlier tests are noted by their designated series and by some parameters that help to identify and distinguish each series from the others. The detailed summary descriptions are intended to help inform future researchers regarding the large, historical, empirical data base generated from that 35-year span during which hundreds of TREAT experiments were performed to investigate and demonstrate the transient behavior of a wide variety of nuclear fuels during severe off-normal and accident conditions -- using direct nuclear heating of the test samples. That empirical basis is foundational and valuable for guiding future qualification and safety evaluation of improved fuel designs and for future transient test planning and performance in TREAT. Since Edition 1 of this report, descriptions of the following test series have been added: D, E, EOS, F, H, J, R, RX, and S.
CFRP composites have not been used for nuclear safety-related applications until recently. In 2019, the ASME Boiler and Pressure Vessel Code Committee approved a new Code Case N-871 for internal repairs of Class 2 and 3 safety-related piping using CFRP for Service Levels A, B, C, and D for a service life of 50 years. The NRC did not review N-871 for inclusion in the Code Case Regulatory Guides. This project focuses on evaluating the capabilities and limitations of Nondestructive Evaluation (NDE) methods for examining the Carbon Fiber Reinforced Polymer (CFRP) repairs in commercial nuclear power plants (NPPs). This Report summarizes the work done on this project until the end of FY24.
In the past decade, the number of microgrids deployed by electric utilities, end-use customers, and third parties has been increasing significantly both in the US and worldwide. The increase is driven by various reasons, such as carbon emission reduction, energy efficiency improvement, reliability and resilience enhancement, energy infrastructure modernization, and more. Microgrid controllers, as the most important components in these deployed microgrids, optimally coordinate the operation and control of the microgrid assets (e.g., distributed energy resources [DERs], energy storage systems, demand response, and even electric vehicles) and ensure that the microgrid is being operated in an efficient, clean, and resilient manner. To that end, the market for microgrid controllers has been growing rapidly in recent years. Various microgrid controllers have been released and continuously updated by vendors to satisfy the different needs of microgrid customers. However, the functionalities demonstrated by microgrid controllers released by different vendors show a huge difference because of a lack of widely known and accepted industrial standards, and various microgrid customers have specific requirements for different applications and scenarios. To obtain a clear view of the current state of the commercial microgrid controllers’ functionalities and identify potential research gaps, a survey of the functionalities of commercial microgrid controllers and the Advanced Distribution Management System (ADMS) developed by vendors and national laboratories was conducted in 2023. The results of the survey are presented in this report with the current status of commercial microgrid controllers analyzed, potential research gaps identified, and future research trends revealed.
Improving the understanding of how computational fluid dynamics (CFD) direct numerical simulations (DNS) of flows in the High Flux Isotope Reactor (HFIR) perform when run in parallel using the high performance computing (HPC) platform Summit at the Oak Ridge Leadership Computing Facility (OLCF) is of particular importance to boost the computational tools used to support HFIR conversion to low enriched fuel (LEU). Evaluation of scaling performance was driven by the increasing importance of graphics processing unit (GPU) usage in HPC, which is becoming the standard for modern supercomputers such as Summit. The desired results are to obtain a strong positive correlation between the computational resources dedicated to a problem and the relative speed-up of the simulation in comparison to a benchmark. This capability will allow substantially improvement in HFIR flow analytical capabilities, specifically when predicting turbulence properties at high Reynolds numbers. The study leverages previous simulation results performed with code PHASTA (finite element) on HPC platforms Cori (NERSC) and Theta (ALCF) [1] with computing options provided in the computing platform OpenFOAM (finite volume) at OLCF. Transitioning from PHASTA to OpenFOAM will (1) eliminate dependence on third-party software for mesh generation and manipulation, (2) reduce resource needs by employing modern architectures, and (3) build expertise for future modeling of HFIR-specific problems like heat transfer in involute geometry, entrance effects, flow structure in channel corners, and so on—all important issues when defining the available thermal margins in the transition to LEU. CPUs and GPUs differ significantly in their architecture and utilization, as discussed in the literature [2]. The most important differences are in the approach to computations and their memory. A single GPU contains a large quantity of cores, enabling it to perform with a much higher throughput than a CPU, but execution requires a different approach. GPU codes execute instructions using the Single-Instruction Multiple-Thread (SIMT) approach in which a single instruction is used for groups of threads called warps. A warp typically consists of 32 threads which must execute the same set of instructions, although on separate threads. Alternately, a CPU has far fewer cores that are much more flexible in their operation, excelling at quickly performing more complex serial computations. This is why GPUs have greater throughput when properly utilized. The second important difference is seen when comparing their memory spaces. Limited memory allocations and CPU–GPU communications cause a significant bottleneck in GPU-accelerated programs. Further study was required to properly take advantage of GPU resources. A comprehensive analysis of code performance and the model-specific features of turbulence constitutes the core of this work. In this study, a DNS simulation of HFIR channel turbulence was performed with the finite volume CFD code OpenFOAM v2112 and CUDA v11.0 on Red Hat Enterprise Linux v8.2. The OpenFOAM installation had AMGx integrated to enable GPU acceleration and utilizes the PETSc4FOAM library. The computational resources and the problem size were scaled on CPU and CPU + GPU architectures to gain a better understanding of the performance of a DNS problem on modern computing hardware. The study aimed to analyze the scaling of the code exclusively on CPUs and then to examine the scaling of the codes with GPU acceleration enabled. Scaling studies included CPU and GPU acceleration on a mesh of varying resolution to analyze the impact of problem size relative to computational resources. In the course of preparing the GPU configuration on Summit, mainly using the AMGX solvers, difficulties were encountered stemming from constant changes resulting from extensive ongoing development activities and the changing environment. This resulted in the inability to complete the GPU portion of the work. The code was compiled and tested, but production runs to assess acceleration were not performed because the used discretional compute time allocation expired as year-end approached. The Summit HPC platform is scheduled for decommissioning in 2024, making it unattractive for future use with Nvidia-based GPUs. Therefore, the work will be moved onto NERSC machines in FY24. An application was prepared and submitted, and sufficient node-hours were awarded to continue the research in the next calendar year. This report summarizes work performed thus far, which mostly focused on CPU OpenFOAM computing.
In support of performing follow on irradiation experiments with previously irradiated materials, the Halden Reactor Project developed unique and state of the art capabilities to refabricate and re-instrument previously irradiated materials. Such materials were used in in-pile tests at the Halden reactor, and out-of-pile tests for example using furnaces as a heat source. The decision to close the Halden Reactor Project results in the loss of this refabrication and reinstrumentation capability. As a result, the United States Department of Energy has determined to develop refabrication and re-instrumentation capability at the unique shielded facilities at Idaho National Laboratory. The development of refabrication capability has been completed and demonstrated. This report focuses on the complementary aspects of re-instrumentation and the progress to date. Halden spent nearly 30 years developing both refabrication and reinstrumentation. Collaboration with Halden is allowing INL to develop this capability much more rapidly. The results include development of the capability to drill annular center holes in ceramic UO2 fuel pellets, development of fuel rod end caps with feedthroughs for centerline instrumentation inside the rodlet, The procurement of both fuel drilling and welding demonstration equipment from Halden, evaluation of surface thermocouple attachments to support better understanding of temperature measurement uncertainties, and finally, the conceptual design of a new shielded enclosure where advanced refabrication and re-instrumentation equipment can be housed. The authors would like to thank the numerous colleagues at INL and Halden who provided support in accomplishing this work. Their support both material and intellectual is invaluable in advancing the state of the art and establishing the capabilities for refabrication and re-instrumentation at INL.
Arctic surface temperatures warmed at twice the global average in the second half of the 20 th century due to Arctic amplification (AA), a phenomenon predominantly caused by regional polar changes, like the melting of perennial sea ice and reduced sea ice extent (leading to more solar radiation being absorbed by the ocean surface as opposed to being reflected back to space by the ice surface). AA is projected to reach a factor of three even if the climate is stabilized by the mid 21 st century by reduced greenhouse gas emissions. In all emissions scenarios, AA is projected to lead to temperature changes at least 2.4 times larger than global mean surface temperature changes occurring between 2070 and 2100. The ice-albedo feedback, which occurs when the polar-marine surface absorbs more radiation as highly reflective sea ice melts, is reversible such that the premise of a runaway process is no longer accepted as a realistic possibility. No matter what actions are taken to reduce CO 2 concentrations in the atmosphere from now on, two different methods of predicting an ice-free Arctic suggest that perennial sea ice will mostly disappear in September by the year 2050. If there is no reduction in anthropogenic CO 2 and methane emissions, that scenario could occur sooner than 2030. Defining Arctic navigability as safe and economic passage of Polar Class 7 cargo ships without need of an escorting icebreaker, no single trans Arctic ship route will be navigable year-round in the first half of the 21 st century, including in the strong emission scenarios. However, seasonal trans-Arctic navigability will increase this century. An estimate on the number of days per year that the Northern See Route (NSR) will be navigable in the future is beyond the scope of this report. Along Northern Sea Routes 5 and 6, which run close to the Russian coast and Yamal LNG plant, an ARC 7 ice class LNG tanker, the equivalent of a Polar Class 3 (PC3) vessel, will be at low risk in December through April at some point during the current decade. May will continue to entail some risk (more than April) along relatively short segments of these routes through the end of the next decade (2030-2039). Come June, snow rapidly melts away, and thereafter the underlying sea ice begins becomes thinner and less concentrated, greatly reducing risk. However, neither path is desirable for ARC 7 tankers due to shallow bathymetry in Sannikov Strait, and a more desirable path for these ships passes to the north of the New Siberian Islands (route 20, discussed further below). Conventional LNG tankers (i.e., non-ice-strengthened vessels according to the IMO classification), without icebreaker escorts, will continue to encounter dangerous or impassable conditions along many sections of the NSR through the end of this decade for many months of the year. Through 2039, these conventional tankers will be able to operate safely along NSR 6 from August through October. By 2040-2049, the span of safe operation increases to August through November, and by 2050-2059 it increases to July through November, assuming a northward deviation to avoid the Sannikov Strait.
This report describes research and development (R&D) activities conducted during Fiscal Year 2023 (FY23) in the Advanced Fuels and Advanced Reactor Waste Streams Strategies work package in the Spent Fuel Waste Science and Technology (SFWST) Campaign supported by the United States (U.S.) Department of Energy (DOE). This report is focused on evaluating and cataloguing Advanced Reactor Spent Nuclear Fuel (AR SNF) and Advanced Reactor Waste Streams (ARWS) and creating Back-end Nuclear Fuel Cycle (BENFC) strategies for their disposition. The R&D team for this report is comprised of researchers from Sandia National Laboratories and Enviro Nuclear Services, LLC.
This report describes research and development (R&D) activities conducted during Fiscal Year 2023 (FY23) in the Advanced Fuels and Advanced Reactor Waste Streams Strategies work package in the Spent Fuel Waste Science and Technology (SFWST) Campaign supported by the United States (U.S.) Department of Energy (DOE). This report is focused on evaluating and cataloguing Advanced Reactor Spent Nuclear Fuel (AR SNF) and Advanced Reactor Waste Streams (ARWS) and creating Back-end Nuclear Fuel Cycle (BENFC) strategies for their disposition. The R&D team for this report is comprised of researchers from Sandia National Laboratories and Enviro Nuclear Services, LLC.
Photovoltaic (PV) deployment has accelerated in recent years compared to projections in the early 2010s. This means that PV end of life (EOL) waste streams will also increase at a higher pace than anticipated. To meet and optimise PV EOL management, appropriate regulatory and technological approaches must be implemented in the near term, ensuring that available options are adapted to the conditions of each country or region. This report aims to review the current regulatory and industrial landscape for selected countries belonging to the International Energy Agency's PV Power Systems technology collaboration programme, to assess status of PV EOL management, allow for comparison and cross-fertilization, and establish a foundation for future tracking of progress. Although volumes of EOL PV modules are still small, EOL PV is treated and recycled in a proper manner in the countries and regions that have EOL regulations in place. However, the current low volumes, limited available recycling technologies, logistics challenges, and undeveloped markets for recovered materials result in a high-cost, low-revenue scenario for PV module recycling globally. Nevertheless, the implementation of PV EOL regulations in more countries and R&D investment in PV recycling is expected to accelerate further improvements to meet future demand and to achieve high-value, low-cost recycling. We hope this report contributes to understanding the global status of PV recycling and to accelerating its development as a promising option for the proper EOL management of PV modules in the coming decades.