Search NASA⌕ Search

SEARCH · Search NASA

Results for “environmental sample results”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Idaho National Laboratory Site Environmental Surveillance Program Report: Third Quarter 2022

This report for the third quarter of 2022 contains results from the INL Site environmental surveillance program’s monitoring of the U.S. Department of Energy’s Idaho National Laboratory (INL) Site’s onsite, boundary and distant location environment, July 1 through September 30, 2022. All sample types (media) and the sampling schedule followed during 2022 are listed in Appendix A. This report contains results for the following sample types: • Air, including particulate air filters, charcoal cartridges, and atmospheric moisture, • Precipitation, • Milk, • Lettuce, • Grain, and • Large Game Animal Sampling.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Idaho National Laboratory Site Environmental Surveillance Program: Fourth Quarter 2022

This report for the fourth quarter of 2022 contains results from the INL Site environmental surveillance program’s monitoring of the U.S. Department of Energy’s Idaho National Laboratory (INL) Site’s Onsite, Boundary and Offsite location environment, October 1 through December 31, 2022. All sample types (media) and the sampling schedule followed during 2022 are listed in Appendix A. This report contains results for the following sample types: • Air, including particulate air filters, charcoal cartridges, and atmospheric moisture, • Quarterly composites, • Precipitation, • Drinking and surface water, • Milk, • Potatoes, • Soil, • Large game animals, • Waterfowl, and • OSLDs.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Idaho National Laboratory Site Environmental Surveillance Program Report: First Quarter 2023

This report for the first quarter of 2023 contains results from the INL Site environmental surveillance program’s monitoring of the U.S. Department of Energy’s Idaho National Laboratory (INL) Site’s onsite, boundary and offsite location environment, January 1 through March 31, 2023. All sample types (media) and the sampling schedule followed during 2023 are listed in Appendix A. This report contains results for the following sample types: •Air, including particulate air filters, charcoal cartridges, and atmospheric moisture •Quarterly composites •Precipitation •Milk •Large game animal sampling.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS1995

LDEF materials results for spacecraft applications: Executive summary

To address the challenges of space environmental effects, NASA designed the Long Duration Exposure Facility (LDEF) for an 18-month mission to expose thousands of samples of candidate materials that might be used on a space station or other orbital spacecraft. LDEF was launched in April 1984 and was to have been returned to Earth in 1985. Changes in mission schedules postponed retrieval until January 1990, after 69 months in orbit. Analyses of the samples recovered from LDEF have provided spacecraft designers and managers with the most extensive data base on space materials phenomena. Many LDEF samples were greatly changed by extended space exposure. Among even the most radially altered samples, NASA and its science teams are finding a wealth of surprising conclusions and tantalizing clues about the effects of space on materials. Many were discussed at the first two LDEF results conferences and subsequent professional papers. The LDEF Materials Results for Spacecraft Applications Conference was convened in Huntsville to discuss implications for spacecraft design. Already, paint and thermal blanket selections for space station and other spacecraft have been affected by LDEF data. This volume synopsizes those results.

Whitaker, A. F.↗
NASA NTRS2024

Analyses of the MISSE 9-15 Polymers and Composites Experiment 1-4 (PCE 1-4) Contamination Samples

Spacecraft in low Earth orbit (LEO) are subjected to harsh environmental conditions, including radiation (cosmic rays, ultraviolet (UV), x-ray and charged particle radiation), micrometeoroids and orbital debris, temperature extremes, thermal cycling, and atomic oxygen (AO). These environmental exposures can result in erosion, embrittlement and optical property degradation of susceptible materials threatening spacecraft performance and durability. To increase our understanding of environmental effects such as AO erosion and radiation induced embrittlement of spacecraft materials, NASA Glenn Research Center developed a series of experiments that were flown as part of the Materials International Space Station Experiment (MISSE) missions on the exterior of the International Space Station (ISS). Recently, four Glenn experiments with 365 flight samples were flown on ISS’s MISSE-Flight Facility (MISSE-FF). These experiments are the Polymers and Composites Experiment-1 (PCE-1) flown as part of the MISSE-9 mission, the PCE-2 flown as part of the MISSE-10 mission, the PCE-3 flown as part of the MISSE-12 and MISSE-15 missions, and the PCE-4 flown as part of the MISSE-13 mission. Each of these experiments included passive contamination witness samples in each flight direction for post-flight molecular contamination analyses. A total of 13 contamination flight samples were flown. The post-flight analyses of the PCE 1-4 contamination samples include X-ray Photoelectron Spectroscopy (XPS) analyses (surface and ion sputter depth analyses) and optical properties (total reflectance, total transmittance and solar absorptance). This paper provides results of post-flight analyses of the PCE 1-4 contamination samples and their corresponding control samples. Knowledge of on-orbit contamination is important for the PCE 1-4 flight data interpretation.

Atomic Oxygen↗
NASA NTRS1999

Rapid direct methods for enumeration of specific, active bacteria in water and biofilms

Conventional methods for detecting indicator and pathogenic bacteria in water may underestimate the actual population due to sublethal environmental injury, inability of the target bacteria to take up nutrients and other physiological factors which reduce bacterial culturability. Rapid and direct methods are needed to more accurately detect and enumerate active bacteria. Such a methodological advance would provide greater sensitivity in assessing the microbiological safety of water and food. The principle goal of this presentation is to describe novel approaches we have formulated for the rapid and simultaneous detection of bacteria plus the determination of their physiological activity in water and other environmental samples. The present version of our method involves the concentration of organisms by membrane filtration or immunomagnetic separation and combines an intracellular fluorochrome (CTC) for assessment of respiratory activity plus fluorescent-labelled antibody detection of specific bacteria. This approach has also been successfully used to demonstrate spatial and temporal heterogeneities of physiological activities in biofilms when coupled with cryosectioning. Candidate physiological stains include those capable of determining respiratory activity, membrane potential, membrane integrity, growth rate and cellular enzymatic activities. Results obtained thus far indicate that immunomagnetic separation can provide a high degree of sensitivity in the recovery of seeded target bacteria (Escherichia coli O157:H7) in water and hamburger. The captured and stained target bacteria are then enumerated by either conventional fluorescence microscopy or ChemScan(R), a new instrument that is very sensitive and rapid. The ChemScan(R) laser scanning instrument (Chemunex, Paris, France) provides the detection of individual fluorescently labelled bacterial cells using three emission channels in less than 5 min. A high degree of correlation has been demonstrated between results obtained with the ChemScan and traditional plate counts of mixed natural bacterial populations in water. The continuing evolution of these methods will be valuable in the rapid and accurate analysis of environmental samples.

Review, Tutorial↗
DOE OSTI2024

Chloroform Fumigation Extraction for Microbial Biomass and Dissolved Organic Carbon from SPRUCE, Marcell Experimental Forest, Minnesota, 2021, 2022, and 2024

This data set provides the results for chloroform fumigation extraction (CFE) of peat samples collected from ambient and experimental plots in the Spruce and Peatland Responses Under Environmental Change (SPRUCE) Experiment site in June and August of 2021, June of 2022, and June, August, and October of 2024. The SPRUCE Experiment site is in the Marcell Experimental Forest in northern Minnesota, USA. The data set includes values for microbial biomass carbon (MBC), microbial biomass nitrogen (MBN), dissolved organic carbon (DOC), dissolved nitrogen (DN), moisture content (MC, available for 2021 and 2022 only) and gravimetric water content (GWC) at 11 depth increments of two-meter peat cores taken from 12 sampling sites at SPRUCE (10 temperature treatment enclosures, 2 ambient temperature treatment enclosures). The sample analysis followed standard methods. The samples were analyzed using a Shimadzu Total Organic Carbon/Nitrogen (TOC/N) analyzer (TOC-V and TOC-L; 2021-2022) or an Elementar vario TOC Cube (2024), liquid catalytic oxidation combustion analyzers for total carbon and nitrogen analysis. This dataset contains two data files in comma separate (.csv) format. Additional metadata are provided: two data dictionaries and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format.

dissolved nitrogen↗
NASA NTRS1987

Statistical evaluation of vibration analysis techniques

An evaluation methodology is presented for a selection of candidate vibration analysis techniques applicable to machinery representative of the environmental control and life support system of advanced spacecraft; illustrative results are given. Attention is given to the statistical analysis of small sample experiments, the quantification of detection performance for diverse techniques through the computation of probability of detection versus probability of false alarm, and the quantification of diagnostic performance.

Milner, G. Martin↗
NASA NTRS2010

Thermal Control Materials on MISSE-6 with Comparison to Earlier Flight Data

This slide presentation reviews the results of exposing thermal control materials as studied during Materials International Space Station Experiment-6 (MISSE-6). It discusses the location of the materials, and the type of environmental exposure. It then reviews the effect on the various types of coatings, showing the results with graphs and photos of the samples after the experimental exposure to the low earth orbital environment for comparison with the control sample and with earlier flights.

Finckenor, Miria M.↗
NASA NTRSDate not supplied

NavCube3-mini Lunar GNSS Receiver

This paper describes development and testing of NASA Goddard Space Flight Center’s new NavCube3-mini (NC3m) spaceborne, weak-signal GNSS receiver, which targets all Earth orbit regimes with special focus on lunar applications. NC3m derives from the ground-breaking Magnetospheric Multiscale (MMS) mission Navigator GPS receiver. The MMS-Navigator (launched 2015) holds a Guinness World Record for highest altitude GPS fix and is currently in a highly elliptic orbit with a 29 Earth radii apogee, nearly half lunar distance. NC3m has reduced size, weight, and power compared to the MMS-Navigator, making it suitable for smallsat applications, and adds multi-frequency and multi-GNSS capabilities, among other improvements. A NC3m engineering test unit was subjected to and successfully completed a comprehensive Technology Readiness Level 6 (system/subsystem model or prototype demonstration in a relevant environment) testing campaign in the second half of 2022. This involved high-fidelity simulations in LEO, GEO, and lunar regimes and full environmental testing, including vibration, thermal vacuum, and electromagnetic compatibility. An overview of the NC3m receiver, the test setup, and a sample of results is presented. The results include predicted performance at high-altitude and in the lunar regime.

NavCube3↗
DOE OSTI2021

Extreme Molecular Complexity Resulting in a Continuum of Carbonaceous Species in Biomass Burning Tar Balls from Wildfire Smoke

Biomass burning emits a wide range of carbonaceous particles into the atmosphere and has negative impacts on human health and the Earth’s radiative balance. Nonvolatile spherical organic aerosol particles, commonly known as tar balls, represent one of the most abundant particles in aged biomass burning smoke. However, the detailed molecular-level composition of ambient tar balls is largely unknown but critical to access their environmental impacts. Ambient aerosol samples collected during a wildfire event, which were ~90% tar balls by number fraction, were analyzed using ultrahigh resolution Orbitrap Elite mass spectrometry with four complementary ionization modes. Our results show the molecular composition of tar balls to be complex, composed of over 10,000 molecular formulas. Model estimated saturation mass concentrations and relative humidity dependent glass transition temperatures were consistent with low volatility and solid morphology as expected for tar balls. Room-temperature evaporation kinetics showed that these particles were composed of ~90% non-volatile species. The molecular complexity detected here signifies a continuum of carbonaceous species, ranging from C3 to C45 with continuous ranges of oxygenation and hydrogen saturation for each Cn. Approximately 24% of molecular formulas were estimated the be highly aromatic, which could indicate chemical compounds with negative health effects, and which may contribute to visible light absorption. The carbon continuum observed here has significant implications for the molecular characterization of atmospheric organic matter. The level of complexity detected here should not be ignored in future studies and we demonstrate that multiple analytical methods may be required to suitably interpret this complexity on a molecular level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1997

Background contamination by coplanar polychlorinated biphenyls (PCBs) in trace level high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) analytical procedures

The addition of the "dioxin-like" polychlorinated biphenyl (PCB) congeners to the assessment of risk associated with the 2,3,7,8-chlorine substituted dioxins and furans has dramatically increased the number of laboratories worldwide that are developing analytical procedures for their detection and quantitation. Most of these procedures are based on established sample preparation and analytical techniques employing high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS), which are used for the analyses of dioxin/furans at low parts-per-trillion (ppt) levels. A significant and widespread problem that arises when using these sample preparation procedures for the analysis of coplanar PCBs is the presence of background levels of these congeners. Industrial processes, urban incineration, leaking electrical transformers, hazardous waste accidents, and improper waste disposal practices have released appreciable quantities of PCBs into the environment. This contamination has resulted in the global distribution of these compounds via the atmosphere and their ubiquitous presence in ambient air. The background presence of these compounds in method blanks must be addressed when determining the exact concentrations of these and other congeners in environmental samples. In this study reliable procedures were developed to accurately define these background levels and assess their variability over the course of the study. The background subtraction procedures developed and employed increase the probability that the values reported accurately represent the concentrations found in the samples and were not biased due to this background contamination.

Polychlorinated Biphenyls/analysis/metabolism↗
DOE OSTI2020

Leveraging Environmental Monitoring Results from Department of Energy Sites for Research on the Food-Energy-Water Nexus

The Annual Site Environmental Report (ASER) from a U.S. Department of Energy (DOE) Site summarizes environmental data; environmental management performance; compliance with applicable DOE, federal, state, and local regulations; and restoration and surveillance monitoring programs. The Savannah River Site (SRS) produces ASERs that include results of monitoring mercury levels in fish samples obtained in the vicinity of SRS. Mercury is a toxic trace metal and the methylated organic form is a neurotoxin that bioaccumulates in the food web, endangering humans and other organisms. In United States, power plants are the largest source of mercury emissions. Research Objective: To determine the patterns of mercury levels in fish samples reported in the SRS environmental monitoring reports. We developed box plot visualizations to make sense of the data as well as identify fish species, dates and location with outlier mercury content. The integration and visual representation of multi-year datasets can support decision making processes on environmental compliance and environmental sustainability conducted at U.S. DOE Sites. We are constructing datasets from textual, image and multivariable data sources in the multi-year ASERs of the U.S. DOE Savannah River Site (SRS https://www.srs.gov/general/pubs/ERsum/index.html). The Fish Surveillance for mercury presents a case study for the intersection of food, energy and water systems. The dataset of 864 records (2008 and 2009) of mercury levels includes water location of fish, fish species, collection date and mercury content of fish sample. The patterns of mercury levels in the fish species as well as locations provide knowledge for further investigations. A research area for future studies is the composition of microbial communities in fish guts of varying levels of mercury.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Round Robin Analysis of Uranium Isotopics on Cotton Swipes Measured Using Microextraction-Based Sampling Versus Conventional Bulk Analysis

A comparison of microextraction sampling methods to directly analyze uranium isotopics on cotton swipes was performed concurrently with traditional bulk-processing methods. For the microextraction sampling approach, two different detection platforms were evaluated, a quadrupole-based inductively coupled plasma mass spectrometer (ICP-MS) and the liquid sampling-atmospheric pressure glow discharge (LS-APGD) coupled to an Orbitrap mass spectrometer. Results presented from this innovative sampling approach (i.e., microextraction) are compared with a more traditional approach employed for analysis of cotton-based environmental swipes, namely bulk ashing/digestion, separation, and subsequent analysis by high-precision multi-collector ICP-MS. Overall, the microextraction approach proved to be a reliable and accurate means to determine isotopic ratios of uranium collected on cotton swipes. The ICP-MS-based detection had relative standard deviations of <0.65% for the major isotopic determinations, whereas the LS-APGD-Orbitrap method had relative standard deviations of <3%. The percent relative difference for the 235 U/ 238 U ratios, in comparison to the expected values, was <1% for ICP-MS and <4% for the microplasma-Orbitrap method. Additionally, the microextraction ICP-MS accurately (<2%) and precisely (<5%) determined the minor isotopic compositions (i.e., 234 U/ 238 U and 236 U/ 238 U).

ICP-MS↗
DOE OSTI2022

Soil Sample Report in Support of the Site 300 Hazardous Waste Facility Permit, Part V, Special Condition #16 a-f

The California Department of Toxic Substances Control (DTSC) issued a Resource Conservation and Recovery Act (RCRA) Hazardous Waste Facility Permit (HWFP) to Lawrence Livermore National Laboratory (LLNL) Experimental Test Site 300 (Site 300) in August 2017. This soil sampling summary report is required as part of the HWFP, Part V, Special Condition #16 a-f. Soil sample results for Constituents of Concern (COC) were evaluated relative to established site-wide background levels that were developed by the LLNL Environmental Restoration Department (ERD) for site mitigation work pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1981

Evaluation of the effects of a freeze/thaw environment on cellular glass

Using the evaluation criteria of water vapor permeability and conformability, a protective butylrubber/silicone conformal coating system was selected for use on Foamglas substrates in a freeze/thaw environment. The selection of a specific freeze/thaw cycle which closely models field conditions is discussed. A sampling plan is described which allows independent evaluation of the effects of conformal coatings, cycle number and location within the environmental chamber. The results of visual examination, measurement of density, modulus of rupture and Young's modulus are reported. Based upon statistical evaluation of the experimental results, it is concluded that no degradation in mechanical properties of either coated or uncoated Foamglas occurred within the duration of the test (53 freeze/thaw cycles).

Frickland, P.↗
DOE OSTI2020

SPRUCE Soil Metabolome Responses to Whole Ecosystem Warming in SPRUCE Experimental Plots Beginning in 2016

This dataset reports a suite of complementary environmental geochemical analyses of peat extracts and porewater samples from SPRUCE experimental plots across a range of whole ecosystem warming (WEW) temperature treatments beginning in 2016. Results of peat extract analyses include NMR and GC-MS analyses of central metabolites, liquid chromatography mass spectra (LC-MS) analyses of lipids, and quantitative proteomics. Porewater was analyzed by FTICR-MS for secondary metabolites, and for carbon dioxide (CO2), methane (CH4) concentrations, stable isotope composition, and the differential solubility corrected CO2:CH4 ratio. This dataset contains six files in comma separated (*.csv) format.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 2: Experimental determination of hydrogen isotopic equilibrium for ethane-H2 from 30 to 200 °C and propane-H2 from 75 to 200 °C

The stable isotopic compositions of light n-alkanes, including methane, ethane, and propane, are often used to identify the sources and thermal maturity of natural gas samples. Though stable isotopic compositions of these molecules are commonly assumed to be controlled by kinetic isotope effects, recent studies have proposed both carbon and hydrogen isotopic equilibrium may also occur in some samples. Assessing whether samples are in isotopic equilibrium requires knowledge of light alkane equilibrium fractionation factors over geologically relevant temperatures for formation and storage (up to ∼300 °C). In this study, we report experimental results of hydrogen isotopic equilibrium between ethane and H2 from 30 to 200 °C and propane and H2 from 75 to 200 °C. We compare these results with high-level theoretical calculations and provide a preferred polynomial fit to describe equilibrium fractionation factors. Comparison of these fractionation factors with a compilation of ∼500 compiled environmental gas samples supports the proposal that many (∼50%) of these natural gas samples exhibit hydrogen isotopic compositions consistent with having formed in or attained methane-ethane-propane hydrogen isotopic equilibrium over geologically relevant temperatures for formation and storage (50–300 °C).

Turner, Andrew C↗