Search NASA⌕ Search

SEARCH · Search NASA

Results for “extreme wind speeds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1921

On the Resistance of the Air at High Speeds and on the Automatic Rotation of Projectiles

Here, the laws governing the flow of a compressible fluid through an opening in a thin wall are applied to the resistance of the air at high speeds, especially as applied to the automatic rotation of projectiles. The instability which we observe in projectiles shot into the air without being given a moment of rotation about their axis of symmetry, or without stabilizing planes, is a phenomenon of automatic rotation. It is noted that we can prevent this phenomenon of automatic rotation by bringing the center of gravity sufficiently near one end, or by fitting the projectile with stabilizing planes or a tail. The automatic rotation of projectiles is due to the suction produced by the systematic formation of vortices behind the extremity of the projectile moving with the wind.

Riabouchinski, D↗
NASA NTRS1978

Evidence for a constant speed of shock propagation between 0.8 AU and 2.2 AU

The results of preliminary analysis of the in situ observations of solar wind plasma and interplanetary magnetic field data are presented. It is indicated that two planetary shocks associated with the August 1972 solar events propagated at approximately constant speed between 0.8 AU and 2.2 AU. This result is contrary to some theoretical expectations and earlier reports for these events of a strong deceleration of these shocks with increasing heliocentric distance. One example given is the difference between observed shock speeds of 700 km/sec and the estimated speeds of 2200 km/sec for Pioneer 9 and 1000 km/sec for Pioneer 10. These higher average speeds associated with the propagation of the shocks from the sun to the spacecraft, therefore, imply an extremely strong deceleration closer to the sun (within 0.8 AU).

Intriligator, D. S.↗
NASA NTRS2015

Multiple Absorption Components in the Post-Periastron He I P Cygni Absorption Troughs of Eta Carinae

We have obtained more than 100 high spectral resolution (R approx. 90,000) spectra of the massive binary star eta Carinae since 2012 in an effort to continue our orbital and long-term echelle monitoring of this extreme binary (Richardson et al. 2010, AJ, 139, 1534) with the CHIRON spectrograph on the CTIO 1.5 m telescope (Tokovinin et al. 2013, PASP, 125, 1336) in the 4550-7500A region. We increased our monitoring efforts and observation frequency as the periastron event of 2014 has approached, and resumed observations in October. We note that since mid-October, we have observed unusual multiple absorption components in the P Cygni troughs of the He I lines (4714, 5876, 6678, and 7065; 4921 and 5015 are blended with Fe II). In particular, we note that these components extend to -700 km/s, well beyond the terminal wind speed of the primary. These absorptions are likely related to clumps and turbulence in the wind-wind collision region and bow shock, as suggested by the high-velocity absorption observed by Groh et al. (2010, A&A, 519, 9) in the He I 10830A transition and our pre-periastron observations (Richardson et al. 2014, ATel #6336). In these cases, we suspect that we look along an arm of the shock cone and that we see a fast absorption change from the other collision region shortly after periastron. Further, high spectral resolution data are highly encouraged, especially for resolving powers greater than 50,000. These observations were obtained with the CTIO 1.5 m telescope, operated by the SMARTS Consortium, and were obtained through both SMARTS and NOAO programs 2012A-0216, 2012B-0194, and 2013b-0328. We thank Emily MacPherson (Yale) for her efforts in scheduling the observations that we have and will obtain in the coming weeks and months.

multiple absorption components↗
NASA NTRS1995

Interplanetary planar magnetic structures associated with expanding active regions

Planar magnetic structures are interplanetary objects whose magnetic field cannot be explained by Parker's solar wind model. They are characterized by two-dimensional structure of magnetic field that are highly variable and parallel to a plane which is inclined to the ecliptic plane. They appeared independently of interplanetary compression, solar flares, active prominences nor filament disappearances, but the sources often coincided with active regions. On the other hand, it has been discovered by the Yohkoh Soft X-ray telescope that active-region corona expand outwards at speeds of a few to a few tens of km/s near the Sun. The expansions occurred repeatedly, almost continually, even in the absence of any sizable flares. In the Yohkoh Soft X-ray images, the active-region corona seems to expand out into interplanetary space. Solar sources of interplanetary planar magnetic structures observed by Sakigake were examined by Yohkoh soft X-ray telescope. During a quiet period of the Sun from January 6 to November 11, 1993, there found 5 planar magnetic structures according to the criteria (absolute value of Bn)/(absolute value of B) less than 0.1 for planarity and (dB)/(absolute value of B) greater than 0.7 for variability of magnetic field, where Bn, dB, and the absolute value of B are field component normal to a plane, standard deviation, and average of the magnitude of the magnetic field, respectively. Sources of 4 events were on low-latitude (less than 5 degrees) active regions from which loop-like structures were expanding. The coincidence, 80%, is extremely high with respect to accidental coincidence, 7%, of Sakigake windows of solar wind observation with active regions. The last source was on loop-like features which seemed to be related with a mid-latitude (20 degrees) active region.

Nakagawa, Tomoko↗
NASA NTRS1986

Steady hydromagnetic flows in open magnetic fields. I - A class of analytic solutions

In the case of an establishment of theoretical models of the hydromagnetic solar wind, the inclusion of the effects of the magnetic field in the solar wind makes it extremely dificult to solve the mathematical problem. This paper has the objective to present a set of particular analytic solutions. The general formulation of Tsinganos (1982) is used to identify a class of analytic solutions to the equations of steady hydromagnetic flows in spherical coordinates. Flow in an open magnetic field are studied, taking into account the problem in dimensionless form, the special case of radial flows with alpha = 0, general radial flows, illustrative examples for flows in which alpha is not equal to 0, a parametric study of nonradial flows in which alpha is not equal to zero, variations in the parameter nu, and variations in the initial speed eta.

Low, B. C.↗
NASA NTRS1961

Effect at High Subsonic Speeds of Fuselage Forebody Strakes on the Static Stability and Vertical-Tail-Load Characteristics of a Complete Model Having a Delta Wing

A wind-tunnel investigation at high subsonic speeds has been conducted to determine the effect of fuselage forebody strakes on the static stability and the vertical-tail-load characteristics of an airplane-type configuration having a delta wing. The tests were made at Mach numbers from 0.60 to 0.92 corresponding to Reynolds numbers from 3.0 x 10(exp 6) to 4.2 x 10(exp 6), based on the wing mean aerodynamic chord, and at angles of attack from approximately -2 to 24 deg. The strakes provided improvements in the directional stability characteristics of the wing-fuselage configuration which were reflected in the characteristics of the complete configuration in the angle-of-attack range where extreme losses in directional stability quite often occur. It was also found that the strakes, through their beneficial effect on the wing-fuselage directional stability, reduced the vertical-tail load per unit restoring moment at high angles of attack. The results also indicated that, despite the inherent tendency for strakes to produce a pitch-up, acceptable pitching-moment characteristics can be obtained provided the strakes are properly chosen and used in conjunction with a wing-body-tail configuration characterized by increasing stability with increasing lift.

Polamus, Edward C.↗
NASA NTRS1978

Wind tunnel tests of a blade subjected to midchord torsional oscillation at high subsonic stall flutter conditions

A mechanical drive system for oscillating blades in a wind tunnel at frequencies up to 767 hertz and amplitudes of + or - 1.2 deg is described. High-speed motion pictures of schlieren images of the flow over a double-circular arc blade oscillating in harmonic motion about the midchord revealed extensive shock patterns at a nominal free stream Mach number of 0.7, a mean angle of attack of 4 deg, and reduced frequency of about 0.7. A phase lag resulting from the slow response of the flow to the motion of the blade increased with increasing reduced frequency. This phase lag, based on the difference between the time the blade attained its maximum angle of attack and the time required for the normal shock to reach its extreme downstream position, was nominally 100 deg at the above conditions.

Boldman, D. R.↗
NASA NTRS2008

Relationship between Mean Winds and Large 10-day Precipitation Anomalies over the Continental U.S.

To better understand the role of surface boundary forcing upon interannual and decadal variability of droughts and precipitation excesses over the continental U. S., an observational study has been carried out to better investigate the dynamical linkages between surface boundary forcing and droughts/floods. This study examines the relationship during the warm season between observed mean wind patterns on the 10-15 day time scale and anomalies in precipitation on that same time scale over the U. S. Each of the 7 cases of significant 10-day, warm-season drought over the U, S. since 1948 that has been investigated was accompanied by significant continental-scale ridging of the mean 10-day 250 mb wind pattern over the continental U.S. and a mid-Pacific relative maximum of 250 mb wind speed of at least 30 m/sec within 20 degrees of the international Date Line. This perhaps suggests the presence of a wave-guide phenomenon over the Pacific. The drought signal for each of these cases was still quite evident when averaged over the monthly time scale. While peak magnitudes of the precipitation anomalies were much larger for the 7 chosen cases of significant of precipitation excess were than for the drought cases none of the patterns of precipitation excess were as unambiguous or wide-spread as the drought cases. In only 2 to 3 cases was there evidence of a continental trough in the 250 mb winds. In fact, one case showed slight ridging over Canada and the extreme northern U.S. Strong southerly low-level jets, however, were evident in the 925 mb winds over south-central Texas or the nearby Gulf of Mexico in virtually all of the excessive precipitation cases, while the Great Plains LLJ was weak or displaced to the north of Texas in most of the drought cases. We will further investigate the asymmetry between droughts and precipitation excesses in their horizontal homogeneity and extent, in their temporal evolution, and in how the are forced by the combined effects of the mean 250 mb westerlies and the mean 925 mb southerly winds.

Helfand, H. Mark↗
NASA NTRSDate not supplied

Impacts of Non-Simultaneous Global Photospheric Magnetic Measurements on Coronal and Solar Wind Modeling

The intensity and arrival time of coronal mass ejections (CMEs) can be significantly influenced by the background solar wind encountered as they propagate outward from the Sun into the interplanetary medium. In addition, solar energetic particles (SEPs) race ahead of CME shock fronts and flare regions along magnetic field lines largely determined by the background solar wind. Predicting the solar wind accurately is therefore critical for improving forecasts of CMEs, SEPs, and high-speed streams. Modeling of the corona and solar wind is challenging in general, as it is highly dependent on global photospheric magnetic field maps, which serve as the boundary conditions to all coronal models that drive solar wind models. Unfortunately, less than half of the Sun’s photospheric magnetic field is reliably measured from any given vantage point and thus it is common for the maps to have highly dated and unreliable measurements in them. While Solar Obiter (SolO) now provides for the first time the opportunity to have simultaneous measurements of nearly the entire surface magnetic field of Sun (e.g., when SolO/PHI measurements are combined with those from SDO/HMI), the required alignment to accomplish this occurs only occasionally. Further, coronal models are extremely sensitive to the strengths of the polar magnetic fields of the Sun, which remain poorly observed. Recently, efforts to mitigate this problem include using flux transport models such as the Air Force Data Assimilative Photospheric Flux Transport (ADAPT) model, which evolves the field forward in time using well known transport processes occurring on the Sun. However, it cannot account for the emergence of new magnetic flux without direct observations. The ESA VIGIL mission will eventually provide continuous observations from the L5, and the proposed SunCHASER mission will likewise do this at the L4 vantage point should it be funded. Ultimately, what is needed is a constellation of spacecraft distributed around the Sun with magnetographs that continuously measure the global surface magnetic field. In this talk, we discuss how the lack of simultaneous global measurements of the photospheric magnetic field adversely impacts the predictive performance of coronal and solar wind models.

C. Nick Arge↗
NASA NTRS2024

Vermont Wildland Fires: Investigating the Role of Antecedent Conditions and Recent Environmental Trends in Exacerbating Fire Risk and Potential in Vermont

Under a changing climate, increases in dry conditions and extreme heat events are projected to exacerbate wildfire risk in the northeastern U.S. In recent years, Vermont has observed higher annual temperatures, more frequent heatwaves, increased annual precipitation, extreme flood events, and decreased snowfall. The mechanisms through which environmental factors contribute to increased fire risk in humid environments, such as Vermont, are poorly understood. The team partnered with the National Weather Service, the Vermont Division of Forests, and the University of Vermont to investigate phenological trends and antecedent conditions influencing wildland fire risk. For the phenological analysis, from 2001 to 2023, vegetation data, phenological dates, and snow water equivalent (SWE) values were accessed from Landsat 5Thematic Mapper (TM), Landsat 7Enhanced Thematic Mapper Plus (ETM+), Landsat 8Operational Land Imager (OLI), Landsat 9OLI-2, the Moderate Resolution Imaging Spectroradiometer (MODIS), and the Snow Data Assimilation System (SNODAS), respectively. For the antecedent condition analysis, from 2008 to 2023, soil moisture, Environmental Stress Index, wind speed, minimum relative humidity, and daily precipitation data were obtained from the Global Land Data Assimilation System (GLDAS), SERVIR, gridMET Wind, gridMET Humidity, and NClimGrid, respectively. The study found that green-up dates over the study period remain relatively stable, while snowmelt dates appear increasingly variable. Minimum relative humidity was the most significant environmental variable correlated with wildfire risk in Vermont. Results from this study will inform the National Weather Service's preparation of fire forecasts before prescribed burns and support community outreach by the Vermont Agency of Natural Resources.

Wildland Fire↗
NASA NTRS2005

Should We Believe Atmospheric Temperatures Measured by Entry Accelerometers Traveling at "Slow" Near-Sonic Speeds?

Mars Pathfinder's Accelerometer instrument measured an unexpected and large temperature inversion between 10 and 20 kilometer altitude. Other instruments have failed to detect similar temperature inversions. I test whether this inversion is real or not by examining what changes have to be made to the assumptions in the accelerometer data processing to obtain a more "expected" temperature profile. Changes in derived temperature of up to 30K, or 15%, are necessary, which correspond to changes in derived density of up to 25% and changes in derived pressure of up to 10%. If the drag coefficient is changed to satisfy this, then instead of decreasing from 1.6 to 1.4 from 20 kilometers to 10 kilometers, the drag coefficient must increase from 1.6 to 1.8 instead. If winds are invoked, then speeds of 60 meters per second are necessary, four times greater than those predicted. Refinements to the equation of hydrostatic equilibrium modify the temperature profile by an order of magnitude less than the desired amount. Unrealistically large instrument drifts of 0.5-1.0 meters per square second are needed to adjust the temperature profile as desired. However, rotational contributions to the accelerations may have the necessary magnitude and direction to make this correction. Determining whether this hypothesis is true will require further study of the rigid body equations of motion, with detailed knowledge of the positions of all six accelerometers. The paradox concerning this inversion is not yet resolved. It is important to resolve it because the paradox has some startling implications. At one extreme, are temperature profiles derived from accelerometers inherently inaccurate by 20K or more? At the other extreme, are RS temperature profiles inaccurate by this same amount?

Withers, Paul↗
NASA NTRS2012

Acoustic Surveys of a Scaled-Model CESTOL Transport Aircraft in Static and Forward Speed Conditions

An 11% scale-model of a Cruise-Efficient Short Take-off and Landing (CESTOL) scalemodel test was recently completed. The test was conducted in the AEDC National Full-Scale Aerodynamic Complex (NFAC) 40- by 80-Foot Wind Tunnel at NASA Ames Research Center. The model included two over-wing pod-mounted turbine propulsion simulators (TPS). The hybrid blended wing-body used a circulation control wing (CCW) with leadingand trailing-edge blowing. The bulk of the test matrix included three forward velocities (40 kts, 60 kts, and 100kts), angle-of-attack variation between -5 and 25 , and CCW mass flow variation. Seven strut-mounted microphones outboard of the left wing provided source directivity. A phased microphone array was mounted outboard of the right wing for source location. The goal of this paper is to provide a preliminary look at the acoustic data acquired during the Advanced Model for Extreme Lift and Improved Aeroacoustics (AMELIA) test for 0 angle-of-attack and 0 sideslip conditions. Data presented provides a good overview of the test conditions and the signal-to-noise quality of the data. TPS height variation showed a difference of 2 dB to 3 dB due to wing shielding. Variation of slot mass flow showed increases of 12 dB to 26 dB above the airframe noise and the TPS increased the overall levels an additional 5 dB to 10 dB.

Burnside, Nathan↗
NASA NTRSDate not supplied

Runway Configuration Management with Offline Reinforcement Learning

Runway configuration management (RCM) is a challenging task, and it affects the efficiency of the National Airspace System (NAS) and airport surface operations significantly. Each airport, depending on the geometry, capacity, local climate patterns, etc. has multiple configurations for the runway usage for arriving and departing flights. Many factors such as the incoming/outgoing traffic load, wind direction and speed, convective weather, cloud ceiling and other environmental factors might affect the choice of a runway configuration at any point in time. However, other factors such as safety measures and regulations, noise abatement, capacity of each configuration, and preference of the air traffic controllers (ATCs) can also play a significant role in selecting the configuration. A sub-optimal selection of the runway configuration, or delay in making configuration changes might result in significant increase in taxi times for aircraft on the surface of the airport, fuel and energy use of the aircraft, and maintenance costs. It can also lead to safety concerns, such as an aircraft performing one or more go-arounds before being able to land. All these factors make RCM an extremely important and challenging decision-making process for the ATCs. The current state of practice sets the runway configuration by the ATCs based on relevant information available at the time including weather, traffic, noise abatement, safety bounds, etc. This makes the decision-making process subjective based on the accuracy of the available information and the bias in human decision making. Unfortunately, this approach yields poor results (e.g., significant delays) if the predicted outcomes are uncertain and their relative impact is not well understood. This is especially evident when the uncertainty increases the size of possible predicted outcomes (combinatorial explosion in possible scenarios) that cannot be handled by human reasoning. On the other hand, an automated approach based on machine intelligence can make use of historical data and search through all (or significant amount of) possible scenarios under uncertainty and make well-informed decisions.

Milad Memarzadeh↗
NASA NTRS1994

Response of the thermosphere and ionosphere to geomagnetic storms

Four numerical simulations have been performed, at equinox, using a coupled thermosphere-ionosphere model, to illustrate the response of the upper atmosphere to geomagnetic storms. The storms are characterized by an increase in magnetospheric energy input at high latitude for a 12-hour period; each storm commences at a different universal time (UT). The initial response at high latitude is that Joule heating raises the temperature of the upper thermosphere and ion drag drives high-velocity neutral winds. The heat source drives a global wind surge, from both polar regions, which propagates to low latitudes and into the opposite hemisphere. The surge has the character of a large-scale gravity wave with a phase speed of about 600 m/s. Behind the surge a global circulation of magnitude 100 m/s is established at middle latitudes, indicating that the wave and the onset of global circulation are manifestations of the same phenomena. A dominant feature of the response is the penetration of the surge into the opposite hemisphere where it drives poleward winds for a few hours. The global wind surge has a preference for the night sector and for the longitude of the magnetic pole and therefore depends on the UT start time of the storm. A second phase of the meridional circulation develops after the wave interaction but is also restricted, in this case by the buildup of zonal winds via the Coriolis interaction. Conservation of angular momentum may limit the buildup of zonal wind in extreme cases. The divergent wind field drives upwelling and composition change on both height and pressure surfaces. The composition bulge responds to both the background and the storm-induced horizontal winds; it does not simply rotate with Earth. During the storm the disturbance wind modulates the location of the bulge; during the recovery the background winds induce a diurnal variation in its position. Equatorward winds in sunlight produce positive ionospheric changes during the main driving phase of the storm. Negative ionospheric phases are caused by increases of molecular nitrogen in regions of sunlight, the strength of which depends on longitude and the local time of the sector during the storm input. Regions of positive phase in the ionosphere persist in the recovery period due to decreases in mean molecular mass in regions of previous downwelling. Ion density changes, expressed as a ratio of disturbed to quiet values, exhibit a diurnal variation that is driven by the location of the composition bulge; this variation explains the ac component of the local time variation of the observed negative storm phase.

Fuller-Rowell, T. J.↗
NASA NTRS1972

Experimental investigation of hypersonic buzz on a high cross-range shuttle configuration

A wind tunnel investigation has been conducted to determine the nature of an unsteady hypersonic flow phenomenon, often referred to as hypersonic buzz, on a 1:100 scale model representative of a high cross-range shuttle configuration. The tests, conducted in helium at a nominal Mach number of 17.5, were specifically directed at obtaining a better understanding of the character of the hypersonic flow field in the vicinity of a deflected control surface. Power spectral densities and root mean squared values of surface pressure fluctuations are presented along with observations made from high speed motion pictures, schlieren and oil flow photographs. Flap deflections of 0, 20, 30, 35, 40 and 60 deg were tested at various angles of attack from 0 deg to 37 deg. It is quite clear from these tests that, under certain conditions, extremely unstable hypersonic flow patterns are formed.

Goldman, R. L.↗
NASA NTRS2009

Spinoff 2009

Topics covered include: Image-Capture Devices Extend Medicine's Reach; Medical Devices Assess, Treat Balance Disorders; NASA Bioreactors Advance Disease Treatments; Robotics Algorithms Provide Nutritional Guidelines; "Anti-Gravity" Treadmills Speed Rehabilitation; Crew Management Processes Revitalize Patient Care; Hubble Systems Optimize Hospital Schedules; Web-based Programs Assess Cognitive Fitness; Electrolyte Concentrates Treat Dehydration; Tools Lighten Designs, Maintain Structural Integrity; Insulating Foams Save Money, Increase Safety; Polyimide Resins Resist Extreme Temperatures; Sensors Locate Radio Interference; Surface Operations Systems Improve Airport Efficiency; Nontoxic Resins Advance Aerospace Manufacturing; Sensors Provide Early Warning of Biological Threats; Robot Saves Soldier's Lives Overseas (MarcBot); Apollo-Era Life Raft Saves Hundreds of Sailors; Circuits Enhance Scientific Instruments and Safety Devices; Tough Textiles Protect Payloads and Public Safety Officers; Forecasting Tools Point to Fishing Hotspots; Air Purifiers Eliminate Pathogens, Preserve Food; Fabrics Protect Sensitive Skin from UV Rays; Phase Change Fabrics Control Temperature; Tiny Devices Project Sharp, Colorful Images; Star-Mapping Tools Enable Tracking of Endangered Animals; Nanofiber Filters Eliminate Contaminants; Modeling Innovations Advance Wind Energy Industry; Thermal Insulation Strips Conserve Energy; Satellite Respondent Buoys Identify Ocean Debris; Mobile Instruments Measure Atmospheric Pollutants; Cloud Imagers Offer New Details on Earth's Health; Antennas Lower Cost of Satellite Access; Feature Detection Systems Enhance Satellite Imagery; Chlorophyll Meters Aid Plant Nutrient Management; Telemetry Boards Interpret Rocket, Airplane Engine Data; Programs Automate Complex Operations Monitoring; Software Tools Streamline Project Management; Modeling Languages Refine Vehicle Design; Radio Relays Improve Wireless Products; Advanced Sensors Boost Optical Communication, Imaging; Tensile Fabrics Enhance Architecture Around the World; Robust Light Filters Support Powerful Imaging Devices; Thermoelectric Devices Cool, Power Electronics; Innovative Tools Advance Revolutionary Weld Technique; Methods Reduce Cost, Enhance Quality of Nanotubes; Gauging Systems Monitor Cryogenic Liquids; Voltage Sensors Monitor Harmful Static; and Compact Instruments Measure Heat Potential.

Source record↗
NASA NTRS2019

Analysis of A Severe Dust Storm and Its Impact on Air Quality Conditions Using Wrf-Chem Modeling, Satellite Imagery, and Ground Observations

This study presents a comprehensive analysis of an extreme dust event recorded in the Arabian Peninsula and the United Arab Emirates (UAE) between 31 March and 3 April 2015. Simulations of the dust event with the Weather Research and Forecasting model coupled with the Chemistry module (WRF-Chem) were analyzed and verified using MSG-SEVIRI imagery and aerosol optical depth (AOD) from the recent 1-km Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm for MODIS Terra/Aqua. Data from the National Centers for Atmospheric Prediction/National Center for Atmospheric Research (NCEP/NCAR) and the upper-air radiosonde observations were used to understand the synoptic of the event. In addition, the impact of the event on atmospheric and air quality conditions is investigated. The Air Quality Index (AQI) was calculated prior, during, and after the event to assess the degradation of air quality conditions. Simulated temperature, relative humidity, wind speed, and surface radiation were compared to observations at six monitoring stations in the UAE giving R2 values of 0.84, 0.63, 0.60, and 0.84, respectively. From 1 to 2 April 2015, both observations and simulations showed an average drop in temperature from 33 to 26 °C and radiance reduction from about 950 to 520 Wm−2. The AOD modeled by WRF-Chem showed a good correlation with Aerosol Robotic Network (AERONET) measurements in the UAE with R2 of 0.83. The AQI over the UAE reached hazardous levels during the peak of the dust event before rapidly decreasing to moderate–good air quality levels. This work is the first attempt to demonstrate the potential of using WRF-Chem to estimate AQI over the UAE along with two satellite products (MODIS-MAIAC and MSG-SEVIRI) for dust detection and tracking.

dust storm↗
NASA NTRS2012

Resin-Impregnated Carbon Ablator: A New Ablative Material for Hyperbolic Entry Speeds

Ablative materials are required to protect a space vehicle from the extreme temperatures encountered during the most demanding (hyperbolic) atmospheric entry velocities, either for probes launched toward other celestial bodies, or coming back to Earth from deep space missions. To that effect, the resin-impregnated carbon ablator (RICA) is a high-temperature carbon/phenolic ablative thermal protection system (TPS) material designed to use modern and commercially viable components in its manufacture. Heritage carbon/phenolic ablators intended for this use rely on materials that are no longer in production (i.e., Galileo, Pioneer Venus); hence the development of alternatives such as RICA is necessary for future NASA planetary entry and Earth re-entry missions. RICA s capabilities were initially measured in air for Earth re-entry applications, where it was exposed to a heat flux of 14 MW/sq m for 22 seconds. Methane tests were also carried out for potential application in Saturn s moon Titan, with a nominal heat flux of 1.4 MW/sq m for up to 478 seconds. Three slightly different material formulations were manufactured and subsequently tested at the Plasma Wind Tunnel of the University of Stuttgart in Germany (PWK1) in the summer and fall of 2010. The TPS integrity was well preserved in most cases, and results show great promise.

Esper, Jaime↗