Search NASA⌕ Search

SEARCH · Search NASA

Results for “flake”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Reconfigurable Electrical Networks within a Conductive Hydrogel Composite

Soft materials that exhibit compliance, programmability, and reconfigurability can have a transformative impact as electronic skin for applications in wearable electronics/soft robotics. There has been significant progress in soft conductive materials; however, achieving electrically controlled and reversible changes in conductivity and circuit connectivity remains challenging. To overcome this limitation, a soft material architecture with reconfigurable conductive networks of silver flakes embedded within a hydrogel matrix is presented. The conductive networks can be reversibly created/disconnected through various stimuli, including current, humidity, or temperature. Such stimuli affect electrical connectivity of the hydrogel by controlling its water content, which can be modulated by evaporation under ambient conditions (passive dehydration), evaporation through electrical Joule heating (active dehydration), or absorption of additional water (rehydration). The resulting change in electrical conductivity is reversible and repeatable, endowing the composite with on-demand reconfigurable conductivity. To highlight this material's unique properties, it is shown that conductive traces can be reconfigured after severe damage and revert to lower conductivity after rehydration. Additionally, a quadruped robot is demonstrated that can respond to stimuli by changing direction following exposure to excess water, thereby achieving reprogrammable locomotion behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pseudotunnel Magnetoresistance in Twisted van der Waals Fe 3 GeTe 2 Homojunctions

Abstract Twistronics, a novel engineering approach involving the alignment of van der Waals (vdW) integrated two‐dimensional materials at specific angles, has recently attracted significant attention. Novel nontrivial phenomena have been demonstrated in twisted vdW junctions (the so‐called magic angle), such as unconventional superconductivity, topological phases, and magnetism. However, there have been only few reports on integrated vdW layers with large twist angles θ t , such as twisted interfacial Josephson junctions using high‐temperature superconductors. Herein, vdW homojunctions of the thin‐magnetic flakes, Fe 3 GeTe 2 (FGT), with large θ t ranging from 0° to 90°, without inserting any tunnel barriers are assembled. Nevertheless, these vdW homojunctions exhibit tunnel‐magnetoresistance (TMR) like behavior (pseudo‐TMR (PTMR) effect) with the ratios highly sensitive to the θ t values, revealing that the vdW gap at the junction interface between the twisted FGT layers behaves like a tunnel barrier and the θ t serves a control parameter for PTMR by drastically varying magnitudes of the lattice‐mismatch and the subsequent appearance of antiferromagnetic (AFM) spin alignment. First‐principles calculations considering vacuum gaps indicate strong dependence of TMR on the θ t driven by the sixfold screw rotational symmetry of bulk FGT. The present homojunctions hold promise as a platform for novel AFM spin‐dependent phenomena and spintronic applications.

Obata, Reiji [Faculty of Science and Engineering A↗
DOE OSTI2025

Pillared Laminar Vermiculite Membranes with Tunable Monovalent and Multivalent Ion Selectivity

Effective membrane separation of Li + from Na + and Mg 2+ is crucial for lithium extraction from water yet challenging for conventional polymeric membranes. Two dimensional (2D) membranes with ordered laminar structures and tunable physicochemical properties offer distinctive ion-sieving capabilities promising for lithium extraction. Recently, phyllosilicates are introduced as abundant and cost-effective source materials for such membranes. However, their water instability and low inherent ion transport selectivity hinder practical applications. Herein, a new class of laminar membranes with excellent stability and tunable ion sieving is reported by incorporating inorganic alumina pillars into vermiculite interlayers. Crosslinking vermiculite flakes with alumina pillars significantly strengthens interlamellar interactions, resulting in robust water stability. Doping of Na + before the pillaring process reverses the membrane's surface charge, substantially boosting Li + separation from multivalent cations via electrostatic interactions. Lithium extraction is often complicated by the presence of co-existing monovalent cations (e.g., Na + ) at higher concentrations. Here, by introducing excess Na + into the membrane after the pillaring process, the separation of Li + from monovalent cations is enhanced through steric effects. This work realizes both monovalent/multivalent and monovalent/monovalent selective ion sieving with the same membrane platform. A separation mechanism is proposed based on Donnan exclusion and size exclusion, providing new insights for membrane design for resource recovery applications.

2D materials↗
DOE OSTI2023

Fully Inkjet‐Printed, 2D Materials‐Based Field‐Effect Transistor for Water Sensing

Abstract Despite significant progress in solution‐processing of 2D materials, it remains challenging to reliably print high‐performance semiconducting channels that can be efficiently modulated in a field‐effect transistor (FET). Herein, electrochemically exfoliated MoS 2 nanosheets are inkjet‐printed into ultrathin semiconducting channels, resulting in high on/off current ratios up to 10 3 . The reported printing strategy is reliable and general for thin film channel fabrication even in the presence of the ubiquitous coffee‐ring effect. Statistical modeling analysis on the printed pattern profiles suggests that a spaced parallel printing approach can overcome the coffee‐ring effect during inkjet printing, resulting in uniform 2D flake percolation networks. The uniformity of the printed features allows the MoS 2 channel to be hundreds of micrometers long, which easily accommodates the typical inkjet printing resolution of tens of micrometers, thereby enabling fully printed FETs. As a proof of concept, FET water sensors are demonstrated using printed MoS 2 as the FET channel, and printed graphene as the electrodes and the sensing area. After functionalization of the sensing area, the printed water sensor shows a selective response to Pb 2+ in water down to 2 ppb. This work paves the way for additive nanomanufacturing of FET‐based sensors and related devices using 2D nanomaterials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mid- to Far-Infrared Anisotropic Dielectric Function of HfS 2 and HfSe 2

The far-infrared (far-IR) remains a relatively underexplored region of the electromagnetic spectrum extending roughly from 20 to 100 µm in free-space wavelength. Research within this range has been restricted due to a lack of optical materials that can be optimized to reduce losses and increase sensitivity, as well as by the long free-space wavelengths associated with this spectral region. Here the exceptionally broad Reststrahlen bands of two Hf-based transition metal dichalcogenides (TMDs) that can support surface phonon polaritons (SPhPs) within the mid-infrared (mid-IR) into the terahertz (THz) are reported. In this vein, the IR transmission and reflectance spectra of hafnium disulfide (HfS 2 ) and hafnium diselenide (HfSe 2 ) flakes are measured and their corresponding dielectric functions are extracted. These exceptionally broad Reststrahlen bands (HfS 2 : 165 cm -1 ; HfSe 2 : 95 cm -1 ) dramatically exceed that of the more commonly explored molybdenum- (Mo) and tungsten- (W) based TMDs (≈5–10 cm -1 ), which results from the over sevenfold increase in the Born effective charge of the Hf-containing compounds. Further, this work therefore identifies a class of materials for nanophotonic and sensing applications in the mid- to far-IR, such as deeply sub-diffractional hyperbolic and polaritonic optical antennas, as is predicted via electromagnetic simulations using the extracted dielectric function.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Excitonic Anisotropy in Single‐Crystalline 2D Silver Phenylchalcogenides

2D materials exhibiting in‐plane anisotropy enable new applications in directional energy transport and polarized optical response. Silver phenylchalcogenides (AgEPh) – including mithrene (AgSePh), tethrene (AgTePh), and thiorene (AgSPh) – represent an exciting new addition to this family, with optical response spanning the visible to near‐UV. Here, excitonic anisotropy is predicted and characterized in this family of materials using a combination of ab initio theory and optical micro‐spectroscopy of single‐crystalline flakes. Using density functional theory and GW with the Bethe–Salpeter equation calculations, it is revealed that all AgEPh compounds exhibit anisotropic electronic band structure and host multiple delocalized excitons with in‐plane anisotropy. Room‐temperature polarization‐resolved optical micro‐spectroscopy shows that orthogonally polarized excitons with similar energy lead to nearly isotropic absorption in AgSPh, whereas energy separation between excitonic resonances in AgSePh and AgTePh leads to strong absorption and emission anisotropy. Cryogenic reflectance micro‐spectroscopy further reveals exciton fine structure in AgSePh, reconciling the discrepancies between room‐temperature experiments and theoretical predictions. Finally, it is demonstrated that the optical response of thicker AgEPh crystals is influenced by photonic effects arising from finite crystal size. Overall, this work advances the understanding of the relationship between anisotropic structure, composition, and excitonic properties in AgEPh, providing a foundation for technological integration.

2D↗
DOE OSTI2021

0D Nanocrystals as Light‐Driven, Localized Charge‐Injection Sources for the Contactless Manipulation of Atomically Thin 2D Materials

A contactless charge‐injection scheme that allows the local and quasi‐permanent manipulation of atomically thin 2D materials, such as monolayer (1L‐)MoS 2 , over spatial extents of several tens of micrometers, is reported. The possibility to precisely position and localize the charge‐injection source to the micrometer scale post‐fabrication allows the investigation of local unperturbed electronic structure of the 2D material. Thanks to this novel approach, the important impact of sample inhomogeneity on the charge‐carrier percolation that occurs over the entire extent of the 2D flake and proliferates up to 40 μm away from the localized charge injection is elucidated. The apparent driving force for carrier relocation is the initial inhomogeneous electronic landscape of the 2D material. These studies demonstrate that local and contactless charge injection with submicrometer precision delivers an alternative route for charge injection and indicates that local 2D material electronic structure can serve as a key element for novel nanoscale device design.

Ghini, Michele↗
DOE OSTI2022

Ultra‐Narrow Phosphorene Nanoribbons Produced by Facile Electrochemical Process

Abstract Phosphorene nanoribbons (PNRs) have inspired strong research interests to explore their exciting properties that are associated with the unique two‐dimensional (2D) structure of phosphorene as well as the additional quantum confinement of the nanoribbon morphology, providing new materials strategy for electronic and optoelectronic applications. Despite several important properties of PNRs, the production of these structures with narrow widths is still a great challenge. Here, a facile and straightforward approach to synthesize PNRs via an electrochemical process that utilize the anisotropic Na + diffusion barrier in black phosphorus (BP) along the [001] zigzag direction against the [100] armchair direction, is reported. The produced PNRs display widths of good uniformity (10.3 ± 3.8 nm) observed by high‐resolution transmission electron microscopy, and the suppressed B 2g vibrational mode from Raman spectroscopy results. More interestingly, when used in field‐effect transistors, synthesized bundles exhibit the n‐type behavior, which is dramatically different from bulk BP flakes which are p‐type. This work provides insights into a new synthesis approach of PNRs with confined widths, paving the way toward the development of phosphorene and other highly anisotropic nanoribbon materials for high‐quality electronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Growth of Large‐Sized 2D Ultrathin SnSe Crystals with In‐Plane Ferroelectricity

Abstract Tin (II) selenide (SnSe) is an emerging 2D material with many intriguing properties, such as record‐high thermoelectric figure of merit (ZT), purely in‐plane ferroelectricity, and excellent nonlinear optical properties. To explore these functional properties and related applications, a crucial step is to develop controllable routes to synthesize large‐area, ultrathin, and high‐quality SnSe crystals. Physical vapor deposition (PVD) constitutes a reliable method to synthesize 2D SnSe, however, effects of various growth parameters have not yet been systematically investigated, and current PVD‐synthesized flakes are often thick (>10 nm) with small lateral sizes (<10 µm). In this work, high‐quality 2D SnSe crystals are synthesized via low‐pressure PVD, which display in‐plane ferroelectric domains observed by piezoresponse force microscopy and polarization‐dependent reflection spectroscopy. Detailed studies regarding the roles of various parameters are further carried out, including substrate pre‐annealing, growth duration, temperature, and pressure, which enable to rationally optimize the growth and obtain 2D SnSe crystals with lateral sizes up to ≈23.0 µm and thicknesses down to ≈2.0 nm (3–4 layers). This work paves the way for the controlled growth of large‐area 2D SnSe, facilitating the future exploration of many interesting multiferroic properties and applications with atomic thickness.

2D materials↗
DOE OSTI2026

Giant Exfoliation Induced Magnetic Coercivity in Fe 3 GaTe 2

Permanent magnets with strong anisotropy and high coercivity underpin modern information and energy technologies, yet rare-earth-free alternatives remain limited. Here, we show that thickness engineering via mechanical exfoliation induces hard magnetic behavior in the van der Waals ferromagnet Fe 3 GaTe 2 . Bulk crystals exhibit Curie temperatures above 350 K but negligible room-temperature coercivity. When thinned below ∼100 nm, the coercive field is dramatically enhanced, reaching nearly 1 T at room temperature for in-plane fields—comparable to conventional hard magnets. Micromagnetic analysis reveals a crossover in magnetization reversal from domain-mediated processes in bulk samples to quasi-coherent rotation in thin flakes, driven by increased effective anisotropy and suppressed domain formation. This thickness-dependent transition enables tuning of magnetic hardness without chemical modification. Combined with high saturation magnetization and robust room-temperature performance, Fe 3 GaTe 2 emerges as a promising rare-earth-free material for spintronic applications. Its layered structure further allows integration into van der Waals heterostructures, where large in-plane coercivity can stabilize magnetic states against perturbations and interlayer coupling, offering potential for high-density nonvolatile memory and domain-wall-based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High‐Rate Polymeric Redox in MXene‐Based Superlattice‐Like Heterostructure for Ammonium Ion Storage

Abstract Achieving both high redox activity and rapid ion transport is a critical and pervasive challenge in electrochemical energy storage applications. This challenge is significantly magnified when using large‐sized charge carriers, such as the sustainable ammonium ion (NH 4 + ). A self‐assembled MXene/n‐type conjugated polyelectrolyte (CPE) superlattice‐like heterostructure that enables redox‐active, fast, and reversible ammonium storage is reported. The superlattice‐like structure persists as the CPE:MXene ratio increases, accompanied by a linear increase in the interlayer spacing of MXene flakes and a greater overlap of CPEs. Concurrently, the redox activity per unit of CPE unexpectedly intensifies, a phenomenon that can be explained by the enhanced de‐solvation of ammonium due to the increased volume of 3 Å‐sized pores, as indicated by molecular dynamic simulations. At the maximum CPE mass loading (MXene:CPE ratio = 2:1), the heterostructure demonstrates the strongest polymeric redox activity with a high ammonium storage capacity of 126.1 C g −1 and a superior rate capability at 10 A g −1 . This work unveils an effective strategy for designing tunable superlattice‐like heterostructures to enhance redox activity and achieve rapid charge transfer for ions beyond lithium.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ambient Temperature Graphitization Based on Mechanochemical Synthesis

Graphite has become a critical material because of its high supply risk and essential applications in energy industries. Its present synthesis still relies on an energy-intensive thermal treatment pathway (Acheson process) at about 3000 °C. Herein, a mechanochemical approach is demonstrated to afford highly crystalline graphite nanosheets at ambient temperature. The key to the success of our methodology lies in the successive decomposition and rearrangement of a carbon nitride framework driven by a denitriding reaction in the presence of magnesium. The afforded graphite features high crystallinity, a high degree of graphitization, a thin nanosheet architecture, and a small flake size, which endow it with superior efficiency in lithium-ion batteries as an anode material in terms of rate capacity and cycle stability. Finally, the mild and cost-effective pathway used in this study could be a promising alternative for graphite production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A comparative study on the physicochemical characteristics of nanoparticles released in vivo from CoCrMo tapers and cement–stem interfaces of total hip replacements

The good biocompatibility and corrosion resistance of the bulk CoCrMo alloy has resulted in it being used in the manufacture of implants and load bearing medical devices. These devices, however, can release wear and corrosion products which differ from the composition of the bulk CoCrMo alloy. The physicochemical characteristics of the particles and the associated in vivo reactivity are dictated by the wear mechanisms and electrochemical conditions at the sites of material loss. Debris released from CoCrMo hip bearings, taper junctions, or cement–stem interfaces can, therefore, have different chemical and morphological characteristics, which provide them with different in vivo toxicities. Here, we propose to assess and compare the characteristics of the particles released in vivo from CoCrMo tapers and cement–stem interfaces which have received less attention compared to debris originating from the hip bearings. The study uses state–of–art characterization techniques to provide a detailed understanding of the size, morphology, composition, and chemistry of the particles liberated from the wear and corrosion flakes from revised hip replacements, with an enzymatic treatment. The phase analyses identified Cr 2 O 3 nanoparticles released from tapers and cement–stem interfaces, whose composition did not vary with origin or particle morphology. The size distributions showed significantly smaller particles were released from the stems, compared to the particles originating from the corresponding tapers. Furthermore, the investigation demonstrates that the tribocorrosive processes occurring at the taper and stem interfaces both result in Cr 2 O 3 nanoparticle formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Additive‐Free Aqueous MXene Inks for Thermal Inkjet Printing on Textiles

Abstract Direct printing of functional inks onto flexible substrates allows for scalable fabrication of wearable electronics. However, existing ink formulations for inkjet printing require toxic solvents and additives, which make device fabrication more complex, limit substrate compatibility, and hinder device performance. Even water‐based carbon or metal nanoparticle inks require supplemental surfactants, binders, and cosolvents to produce jettable colloidal suspensions. Here, a general approach is demonstrated for formulating conductive inkjet printable, additive‐free aqueous Ti 3 C 2 T x MXene inks for direct printing on various substrates. The rheological properties of the MXene inks are tuned by controlling the Ti 3 C 2 T x flake size and concentration. Ti 3 C 2 T x ‐based electrical conduits and microsupercapacitors (MSCs) are printed on textile and paper substrates by optimizing the nozzle geometry for high‐resolution inkjet printing. The chemical stability and electrical properties of the printed devices are also studied after storing the devices for six months under ambient conditions. Current collector‐free, textile‐based MSCs show areal capacitance values up to 294 mF cm −2 (2 mV s −1 ) in poly(vinyl alcohol)/sulfuric acid gel electrolyte, surpassing reported printed MXene‐based MSCs and inkjet‐printed MSCs using other 2D nanomaterials. This work is an important step toward increasing the functional capacity of conductive inks and simplifying the fabrication of wearable textile‐based electronics.

Uzun, Simge↗
DOE OSTI2021

Revealing Nanoscale Confinement Effects on Hyperbolic Phonon Polaritons with an Electron Beam

Hyperbolic phonon polaritons (HPhPs) in hexagonal boron nitride (hBN) enable the direct manipulation of mid-infrared light at nanometer scales, many orders of magnitude below the free-space light wavelength. High-resolution monochromated electron energy-loss spectroscopy (EELS) facilitates measurement of excitations with energies extending into the mid-infrared while maintaining nanoscale spatial resolution, making it ideal for detecting HPhPs. The electron beam is a precise source and probe of HPhPs, which allows the observation of nanoscale confinement in HPhP structures and directly extract hBN polariton dispersions for both modes in the bulk of the flake and modes along the edge. The measurements reveal technologically important nontrivial phenomena, such as localized polaritons induced by environmental heterogeneity, enhanced and suppressed excitation due to 2D interference, and strong modification of high-momenta excitations such as edge-confined polaritons by nanoscale heterogeneity on edge boundaries. Finally, the work opens exciting prospects for the design of real-world optical mid-infrared devices based on hyperbolic polaritons.

2D materials↗
DOE OSTI2022

Ionically Active MXene Nanopore Actuators

Reversible electrochemical intercalation of cations into the interlayer space of 2D materials induces tunable physical and chemical properties in them. In MXenes, a large class of recently developed 2D carbides and nitrides, low intercalation energy, high storage capacitance, and reversible intercalation of various cations have led to their improved performance in sensing and energy storage applications. In this work, a coupled nanopore-actuator system where an ultrathin free-standing MXene film serves as a nanopore support membrane and ionically active actuator is reported. In this system, the contactless MXene membrane in the electric field affects the cation movement in the field through their (de)intercalation between individual MXene flakes. This results in reversible swelling and contraction of the membrane monitored by ionic conductance through the nanopore. This unique nanopore coupled to a mechanical actuation system could provide new insights into designing single-molecule biosensing platforms at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High Ion Conductive and Selective Membrane Achieved through Dual Ion Conducting Mechanisms

Conventional ion-selective membranes, that is ion-exchange and porous membranes, are unable to perform high conductivity and selectivity simultaneously due to the contradictions between their ion selecting and conducting mechanisms. Here, in this work, a bifunctional ion-selective layer is developed via the combination of nanoporous boron nitride (PBN) and ion exchange groups from Nafion to achieve high ion conductivity through dual ion conducting mechanisms as well as high ion selectivity. A template-free method is adopted to synthesize flake-like PBN, which is further enmeshed with Nafion resin to form the bifunctional layer coated onto a porous polyetherimide membrane. The double-layer membrane exhibits excellent ion selectivity (1.49 × 10 8 mS cm –3 min), which is 22 times greater than that of the pristine porous polyetherimide membrane, with outstanding ion conductivity (64 mS cm –1 ). In a vanadium flow battery, the double-layer membrane achieves a high Coulombic efficiency of 97% and outstanding energy efficiency of 91% at 40 mA cm –2 with a stable cycling performance for over 700 cycles at 100 mA cm –2 . PBN with ion exchange groups may therefore offer a potential solution to the limitation between ion selectivity and conductivity in ion-selective membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Photonics in Multimaterial Lateral Heterostructures Combining Group IV Chalcogenide van der Waals Semiconductors

Abstract Lateral heterostructures combining two multilayer group IV chalcogenide van der Waals semiconductors have attracted interest for optoelectronics, twistronics, and valleytronics, owing to their structural anisotropy, bulk‐like electronic properties, enhanced optical thickness, and vertical interfaces enabling in‐plane charge manipulation/separation, perpendicular to the trajectory of incident light. Group IV monochalcogenides support propagating photonic waveguide modes, but their interference gives rise to complex light emission patterns throughout the visible/near‐infrared range both in uniform flakes and single‐interface lateral heterostructures. Here, this work demonstrates the judicious integration of pure and alloyed monochalcogenide crystals into multimaterial heterostructures with unique photonic properties, notably the ability to select photonic modes with targeted discrete energies through geometric factors rather than band engineering. SnS‐GeS 1− x Se x ‐GeSe‐GeS 1− x Se x heterostructures with a GeS 1− x Se x active layer sandwiched laterally between GeSe and SnS, semiconductors with similar optical constants but smaller bandgaps, were designed and realized via sequential vapor transport synthesis. Raman spectroscopy, electron microscopy/diffraction, and energy‐dispersive X‐ray spectroscopy confirm a high crystal quality of the laterally stitched components with sharp interfaces. Nanometer‐scale cathodoluminescence spectroscopy provides evidence for a facile transfer of electron–hole pairs across the lateral interfaces and demonstrates the selection of photon emission at discrete energies in the laterally embedded active (GeS 1− x Se x ) part of the heterostructure.

2D layered crystals↗