Search NASA⌕ Search

SEARCH · Search NASA

Results for “flat sheet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Optimization of multi-layer front-contact grid patterns for solar cells

In a front-contact grid pattern for a solar cell there is a trade-off necessary between shadowing loss and excessive power loss due to voltage drop in the metalization itself. If the metalization is too little there may be excessive contact resistance to the underlying semiconductor and insufficient coverage to control losses in the thin front-surface layer of the solar cell. Optimization of grid pattern area and geometry is considered analytically to minimize total losses. Worthwhile performance advantages are shown to be possible, particularly in concentrator systems, if multi-layer grid patterns are used. The current carrying fingers should be approximately square in metal cross section and the main current feedout bars should not only be wider but also thicker than the primary collecting fingers. This is termed multi-level metalization. Effective use of multi-level grid metalization allows much greater concentration-to-loss ratio for a cell of large area and permits good performance from cells of high front-layer sheet resistance.

Flat, A.↗
NASA NTRS1985

Structural Mapping of Folded Sedimentary Environments from Satellite Images: an Example from Central Asia

In the Tadjik Depression, in Soviet Central Asia, in the absence of existing geologic or topographic maps, an enhanced LANDSAT multispectral scanner image was used in combination with field data to produce a 1:250000 geologic map of the Vakhsh fold-and-thrust belt and adjacent autochthon. Several structural conclusions are reached as a result of this mapping. Deformation of the Cretaceous and Tertiary strata of the fold-and-thrust belt is, in the central Tadjik Depression, conspicuously absent north of a buried basement fault that marks the hinge-zone of the Late Mesozoic passive margin. But, in the eastern half of the depression, thrusting has moved coherent sheets northward, over the block fault, these sheets now lie flat atop the autochthon to the north. The crustal structure inherited from the Mesozoic extensional phase has strongly influenced the Late Cenozoic pattern of deformation, producing the fold-and-thrust belt that is markedly asymmetric. The development of the thrust system has included the progressive overlapping of thrust: the later thrusts apparently formed internal to the older thrusts, and subsequently overrode them.

Leith, W.↗
NASA NTRS1985

Materials requirements for high-efficiency silicon solar cells

To achieve higher Si solar cell efficiencies (greater than 20%), better single-crystal Si must be produced. It is believed possible to bring Cz (Czochralski) Si up to the same low recombination level as FZ (Float Zone) Si. It is also desirable that solar cell Si meet the following requirements: long minority carrier lifetime (0.2 ohm-cm p-type with tau less than 500 microsec); repeatedly uniform lifetime (not spread from 50 to 1000 microsec); a lifetime that does not decrease during normal device processing; a silicon wafer sheet that is flat and stays throughout normal device processing; uniform and reasonable mechanical strength; and, manufacture at low cost (less than $50/sq m).

Wolf, M.↗
NASA NTRS1990

Solar wind and coronal structure near sunspot minimum - Pioneer and SMM observations from 1985-1987

Changes in solar wind speed and magnetic polarity observed at the Pioneer spacecraft are discussed here in terms of the changing magnetic geometry implied by SMM coronagraph observations over the period 1985-1987. The pattern of recurrent solar wind streams, the long-term average speed, and the sector polarity of the interplanetary magnetic field all changed in a manner suggesting both a temporal variation, and a changing dependence on heliographic latitude. Coronal observations during this epoch show a systematic variation in coronal structure and the magnetic structure imposed on the expanding solar wind. These observations suggest interpretation of the solar wind speed variations in terms of the familiar model where the speed increases with distance from a nearly flat interplanetary current sheet, and where this current sheet becomes aligned with the solar equatorial plane as sunspot minimum approaches, but deviates rapidly from that orientation after minimum.

Mihalov, J. D.↗
NASA NTRS2004

Electrostatically clean solar array

Provided are methods of manufacturing an electrostatically clean solar array panel and the products resulting from the practice of these methods. The preferred method uses an array of solar cells, each with a coverglass where the method includes machining apertures into a flat, electrically conductive sheet so that each aperture is aligned with and undersized with respect to its matched coverglass sheet and thereby fashion a front side shield with apertures (FSA). The undersized portion about each aperture of the bottom side of the FSA shield is bonded to the topside portions nearest the edges of each aperture's matched coverglass. Edge clips are attached to the front side aperture shield edges with the edge clips electrically and mechanically connecting the tops of the coverglasses to the solar panel substrate. The FSA shield, edge clips and substrate edges are bonded so as to produce a conductively grounded electrostatically clean solar array panel.

Stern, Theodore Garry↗
NASA NTRS2017

Assessment of NASA Airborne Laser Altimetry Data Using Ground-Based GPS Data near Summit Station, Greenland

A series of NASA airborne lidars have been used in support of satellite laser altimetry missions. These airbornelaser altimeters have been deployed for satellite instrument development, for spaceborne data validation, and to bridge the data gap between satellite missions. We used data from ground-based Global Positioning System (GPS) surveys of an 11 km long track near Summit Station, Greenland, to assess the surface elevation bias and measurement precision of three airborne laser altimeters including the Airborne Topographic Mapper (ATM), the Land, Vegetation, and Ice Sensor (LVIS), and the Multiple Altimeter Beam Experimental Lidar (MABEL). Ground-based GPS data from the monthly ground-based traverses, which commenced in 2006, allowed for the assessment of nine airborne lidar surveys associated with ATM and LVIS between 2007 and 2016. Surface elevation biases for these altimeters over the flat, ice-sheet interior are less than 0.12 m, while assessments of measurement precision are 0.09 m or better. Ground-based GPS positions determined both with and without differential post-processing techniques provided internally consistent solutions. Results from the analyses of ground-based and airborne data provide validation strategy guidance for the Ice, Cloud, and land Elevation Satellite 2 (ICESat-2) elevation and elevation-change data products.

Summit Station↗
NASA NTRS1986

Static current-sheet models of quiescent prominences

A particular class of theoretical models idealize the prominence to be a discrete flat electric-current sheet suspended vertically in a potential magnetic field. The weight of the prominence is supported by the Lorentz force in the current sheet. These models can be extended to have curved electric-current sheets and to vary three-dimensionally. The equation for force balance is 1 over 4 pi (del times B) times Bdel p- p9 z=zero. Using Cartesian coordinates we take, for simplicity, a uniform gravity with constant acceleration g in the direction -z. If we are interested not in the detailed internal structure of the prominence, but in the global magnetic configuration around the prominence, we may take prominence plasma to be cold. Consideration is given to how such equilibrium states can be constructed. To simplify the mathematical problem, suppose there is no electric current in the atmosphere except for the discrete currents in the cold prominence sheet. Let us take the plane z =0 to be the base of the atmosphere and restrict our attention to the domain z greater than 0. The task we have is to solve for a magnetic field which is everywhere potential except on some free surface S, subject to suit able to boundary conditions. The surface S is determined by requiring that it possesses a discrete electric current density such that the Lorentz force on it is everywhere vertically upward to balance the weight of the material m(S). Since the magnetic field is potential in the external atmosphere, the latter is decoupled from the magnetic field and its plane parallel hydrostatic pressure and density can be prescribed.

Wu, F.↗
NASA NTRS2020

Comparisons of Satellite and Airborne Altimetry with Ground-Based Data from the Interior of the Antarctic Ice Sheet

A series of traverses has been conducted for validation of the NASA Ice, Cloud, and land Elevation Satellite 2 on the flat interior of the Antarctic ice sheet. GNSS data collected on three separate 88S Traverses intersect 20% of the ICESat-2 reference ground tracks and have precisions of better than ±7 cm and biases of less than ~4 cm. Data from these traverses were used to assess heights from ICESat-2, CryoSat-2, and Airborne Topographic Mapper (ATM). ICESat-2 heights have better than ±3.3 cm bias and better than ±7.2 cm precision. ATM heights have better than 9.3 cm bias and better than ±9.6 cm precision. CryoSat-2 heights have -38.9 cm of bias and ± 47.3 cm precision. These best-case results are from the flat ice-sheet interior but provide a characterization of the quality of satellite and airborne altimetry.

K. M. Brunt↗
NASA NTRS1990

The magnetosphere of Neptune - Its response to daily rotation

The Neptunian magnetosphere periodically changes every eight hours between a pole-on magnetosphere with only one polar cusp and an earth-type magnetosphere with two polar cusps. In the pole-on configuration, the tail current sheet has an almost circular shape with plasma currents closing entirely within the magnetosphere. Eight hours later the tail current sheet assumes an almost flat shape with plasma currents touching the magnetotail boundary and closing over the tail magnetopause. Magnetic field and tail current sheet configurations have been calculated in a three-dimensional model, but the plasma- and thermodynamic conditions were investigated in a simplified two-dimensional MHD equilibrium magnetosphere. It was found that the free energy in the tail region of the two-dimensional model becomes independent of the dipole tilt angle. It is conjectured that the Neptunian magnetotail might assume quasi-static equilibrium states that make the free energy of the system independent of its daily rotation.

Voigt, Gerd-Hannes↗
DOE OSTI2018

Heat Transfer Coefficient from the Sheet-Piped Light-Absorbing Panels of the Flat-Plate Solar Water-Heating Collectors to the Heat Transfer Fluid in Their Heat-Removing Channels

It has been proposed to introduce a new parameter into the practice of the heat calculation and testing of the flat-plate solar water-heating collectors (FSWHCs)—the coefficient of heat transfer from the light-absorbing panel (LAP) to the heat transfer fluid in its internal heat-exchange channels (HECs) reduced to the unit area of the frontal surface of their cases. The mechanism of the formation of this parameter is studied, the design expression is derived, and a practical example of the calculation to define its value is performed. The structures of the flowing LAPs of a sheet-piped thin parallelepiped form are selected as the objects of the investigation. The reliability of the results of the investigations is proved by comparing the values of the specific (relative to the area unit of the frontal surface of the case) heating efficiency of the collector obtained based on the various formulas.

14 SOLAR ENERGY↗
DOE OSTI2019

The structure and crystal chemistry of vernadite in ferromanganese crusts

The structure and crystal chemistry of vernadite in ferromanganese crusts from the Magellan Seamount in the north-west Pacific Ocean have been investigated using synchrotron X-ray diffraction (XRD), X-ray pair distribution function (PDF) and high-resolution transmission electron microscopy (TEM). XRD patterns of vernadite mainly show two strong diffraction peaks at 2.42–2.43 Å and 1.41 Å without or with a broad (001) diffraction peak, indicating thin layer nanophases along the c -direction. TEM images show flat and curved sheet-like nanocrystals with (001) layer thickness of ~7.2 Å and ~9.6 Å, and their interstratified structure. PDF patterns of the vernadite are similar to those from synthetic δ-MnO 2 and defective birnessite, suggesting a phyllomanganate framework. Combined XRD/PDF patterns suggest that vernadite in the outer part is associated with a higher density interlayer species at triple-edge sharing sites. The proportion of the 10 Å phase increases from the outer (young) part to the inner (old) part of the Mn crusts due to aging and sorption of Mn, Co and Ni from ambient seawater. This study suggests that this combined method of synchrotron radiation XRD/PDF and high-resolution TEM is a powerful tool to determine atomic structures of poorly crystallized nano-minerals. The mixture model of vernadite structure will help to understand the partitioning and distribution of trace elements in the ferromanganese crusts.

36 MATERIALS SCIENCE↗
NASA NTRS1976

15 cm multipole gas ion thruster

A 15-cm multipole thruster was operated on argon and xenon. The multipole approach used has been shown capable of low discharge losses and flat ion beam profiles with a minimum of redesign. This approach employs low magnetic field strengths and flat or cylindrical sheet-metal parts, hence is suited to rapid optimization and scaling. Only refractory metal cathodes were used in this investigation.

Isaacson, G. C.↗
NASA NTRS1985

Crystal growth for high-efficiency silicon solar cells workshop: Summary

The state of the art in the growth of silicon crystals for high-efficiency solar cells are reviewed, sheet requirements are defined, and furture areas of research are identified. Silicon sheet material characteristics that limit cell efficiencies and yields were described as well as the criteria for the ideal sheet-growth method. The device engineers wish list to the material engineer included: silicon sheet with long minority carrier lifetime that is uniform throughout the sheet, and which doesn't change during processing; and sheet material that stays flat throughout device processing, has uniform good mechanical strength, and is low cost. Impurities in silicon solar cells depreciate cell performance by reducing diffusion length and degrading junctions. The impurity behavior, degradation mechanisms, and variations in degradation threshold with diffusion length for silicon solar cells were described.

Dumas, K. A.↗
NASA NTRS1993

Automated Surface Profilometer

Computer-controlled system saves time and labor. Electromechanical scanning system automatically measures deviation of sheets and plates from flatness. Quickly measures surface profile and detects bumps, bulges, and indentations as small as 0.001 in. in height or depth. X-y table moves specimen to programmed locations under digital linear variable differential transformer (LVDT) while computer records surface-height readings of LVDT. Resulting graphical display shows surface contour.

Chern, E. James↗
NASA NTRS1998

Flexible Ceramic-Metal Insulation Composite and Method of Making

A method for joining a woven flexible ceramic fabric and a thin metal sheet creating an integral metal surfaced flexible thermal protection article, which methods compress: placing multiple dots of high temperature metallic or fabric and the thin metal sheet in a random or organized pattern, with the proviso that the brazing material covers about 10% or less of the surface of one flat side of the metal sheet; heating the flexible ceramic fabric, brazing material and thin metal sheet for a predetermined period of time to integrally connect the same; and cooling the formed flexible article to ambient temperature. Preferably the flexible ceramic is selected from fibers comprising atoms of silicon, carbon, nitrogen, boron, oxygen or combinations thereof. The flexible thermal protection article produced is also part of the present invention. The thin metal sheet is comprised of titanium, aluminum, chromium, niobium or alloys or combinations thereof. The brazing material is selected from copper/silver or copper/gold or is a ceramic brazing or adhesive material.

Rasky, Daniel J.↗
DOE OSTI2018

Domain morphology and mechanics of the H / T ' transition metal dichalcogenide monolayers

The properties of two-dimensional (2D) transition metal dichalcogenide (TMD) monolayers can be dynamically controlled via strain-induced displacive structural transformations between semiconducting (H) and metallic or semimetallic ( T ' ) crystal structures. The shapes, symmetries, and kinetics of crystalline domains generated during these transformations and the mechanical response of transforming monolayers are of fundamental and applied interest in, e.g., phase change memory devices and the study of topologically protected edge states in quantum spin Hall insulating T ' crystals. We quantitatively characterize T ' domain morphologies during H → T ' transformations in both flat and bendable TMD monolayers using a combination of first principles and continuum calculations. Wulff constructions for MoTe 2 and MoS 2 show that T ' domains within much larger T ' domains are either rhombi of fixed proportions (if nonmisfitting) or rectangles whose aspect ratio $A_R$ increases with domain size $L_0$ (if misfitting). Isolated T ' domains within much larger H domains undergo a morphological crossover from compact to elongated shapes at $L_0$ ≈ 100 – 200 nm if the sheet is constrained to be flat or $L_0$ $≳$ 2 $μ$m if the sheet is free to bend. This crossover is driven by a competition between anisotropic interfacial energy and elastic misfit energy, and its position can be tuned via the monolayer-substrate interaction strength. It is shown that the aspect ratio $A_R$ obeys a scaling law $A_R$ $~$ $L^{2/3}_0$. Stress-strain response characterized as a function of strain orientation reveals extreme anisotropy in the effective elastic modulus through H / T ' coexistence. Ferroelastic multidomain T ' - WTe 2 monolayers are found to exhibit two to three regimes of reversible mechanical response, and localized buckling in freely suspended T ' monolayers is shown to qualitatively alter T ' domain symmetries.

36 MATERIALS SCIENCE↗
NASA NTRS2019

Assessment of ICESat-2 Ice Sheet Surface Heights, Based on Comparisons over the Interior of the Antarctic Ice Sheet

We collected kinematic Global Navigation Satellite Systems (GNSS) surface height data, on a 750‐km ground‐based traverse of the flat interior of the Antarctic ice sheet, for comparison with Ice, Cloud, and Land Elevation Satellite‐2 (ICESat‐2) surface heights. Vertical errors in the GNSS data are estimated to be 5.6 cm, comparable to results from a previous traverse and with year‐to‐year comparisons. Comparisons of the GNSS heights and 6 months of ICESat‐2 ATL03 photon‐based heights and ATL06 segment‐based heights indicate that the accuracy and precision of ICESat‐2 data are comparable to that of results from the ICESat mission: ATL03 is currently accurate to better than 5 cm with better than 13 cm of surface measurement precision, while ATL06 is currently accurate to better than 3 cm with better than 9 cm of surface measurement precision.

Brunt, K. M.↗