Search NASA⌕ Search

SEARCH · Search NASA

Results for “forced collisions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Theoretical investigations of plasma processes

System analyses are presented for electrically sustained, collision dominated plasma centrifuges, in which the plasma rotates under the influence of the Lorentz forces resulting from the interaction of the current density fields with an external magnetic field. It is shown that gas discharge centrifuges are technically feasible in which the plasma rotates at speeds up to 1 million cm/sec. The associated centrifugal forces produce a significant spatial isotope separation, which is somewhat perturbed in the viscous boundary layers at the centrifuge walls. The isotope separation effect is the more pronounced. The induced magnetic fields have negligible influence on the plasma rotation if the Hall coefficient is small. In the technical realization of collision dominated plasma centrifuges, a trade-off has to be made between power density and speeds of rotation. The diffusion of sputtered atoms to system surfaces of ion propulsion systems and the deposition of the atoms are treated theoretically by means of a simple model which permits an analytical solution. The problem leads to an inhomogeneous integral equation.

Wilhelm, H. E.↗

Surface Collisions Involving Particles and Moisture (SCIP'M)

Experiments were performed on the collision of a solid sphere with a nearly horizontal flat surface covered with a thin layer of viscous liquid. High-speed collisions were obtained by dropping the ball onto the surface from various heights, using gravitational acceleration. Low-speed collisions were obtained using pendulums with long strings or by launching the balls at low velocities in the reduced-gravity environment of parabolic flight. The sphere bounces only when the impact velocity exceeds a critical value. The coefficient of restitution (ratio of rebound velocity to impact velocity) increases with increasing impact velocity above the critical value, indicating the increasing relative importance of elastic deformation to viscous dissipation. The critical impact velocity increases, and the coefficient of restitution decreases, with increasing viscosity or thickness of the liquid layer and with decreasing density or size of the sphere. The ratio of the wet and dry coefficients is expressed as a function of the Stokes number (ratio of particle inertia and viscous forces), showing good agreement between theory and experiment. Similar experiments were performed with the flat surface inclined at various angles to the approaching sphere. A modified Stokes number, which is a measure of the ratio of inertia of the sphere in the normal direction to the viscous forces exerted by the fluid layer, was used for the analysis of oblique collisions. Even for these oblique collisions, it was found that no rebound of the ball was observed below a certain critical Stokes number. The coefficient of normal restitution, defined as a ratio of normal rebound velocity to normal approach velocity, was found to increase beyond the critical Stokes number and even out as it approaches the value for dry restitution at high Stokes numbers. It was also found that, for smooth spheres like steel, the normal restitution at the same modified Stokes number is independent of the angle of impact. The tangential coefficient of restitution, defined as the ratio of tangential rebound velocity to tangential approach velocity, is found to be nearly unity, except for very low approach velocities. Thus, as a first approximation, the theories that predict the coefficient of restitution for head-on wet collisions can be extended to predict the coefficient of normal restitution for oblique wet collisions. Additional experiments were performed with soft surfaces in which a porous cloth or sponge layer was placed over the hard, flat surface. In these experiments, the coefficient of restitution was found to decrease with increasing impact velocity, due to inelastic losses in the soft material. A model combining inelastic deformation and flow through porous media was developed to describe these findings.

Davis, Robert H.↗

Permanent superconducting magnets for space applications

Work has been done to develop superconducting trapped field magnets (TFM's) and to apply them to a bumper-tether device for magnetic docking of spacecraft. The quality parameters for TFM's are J(c), the critical current of the superconductor, and d, the diameter of the superconducting tile. During this year we have doubled d, for production models, from 1 cm to 2 cm. This was done by means of seeding, an improved temperature profile in processing, and the addition of 1 percent Pt to the superconductor chemistry. Using these tiles we have set increasing records for the fields' permanent magnets. Magnets fabricated from old 1 cm tiles trapped 1.52 Tesla at 77K, 4.0T at 65K and 7.0T at 55K. The second of these fields broke a 17 year old record set at Stanford. The third field broke our own record. More recently using 2 cm tiles, we have trapped 2.3T at 77K, and 5.3T at 65K. We expect to trap lOT at 55K in this magnet in the near future. We have also achieved increases in J(c) using a method we developed for seeding U-235, and subsequently bombarding with neutrons. This method doubles J(c). We have not yet fabricated magnets from these tiles. During this year we have increased production yields from 15 percent to 95 percent. We have explored the properties of a magnetic bumper-tether for spacecraft. We have measured the bumper forces, and their dependence on time, distance, and the field of the ordinary ferromagnet (used together with a TFM). We have accounted for 85 percent of the collision energy, and its transformation to magnetic energy and heat energy. We have learned to control the relative bumper and tether forces by controlling TFM and ferromagnetic field strengths.

Weinstein, Roy↗

A generalized Boltzmann kinetic theory for strongly magnetized plasmas with application to friction

Coulomb collisions in plasmas are typically modeled using the Boltzmann collision operator, or its variants, which apply to weakly magnetized plasmas in which the typical gyroradius of particles significantly exceeds the Debye length. Conversely, O’Neil has developed a kinetic theory to treat plasmas that are so strongly magnetized that the typical gyroradius of particles is much smaller than the distance of the closest approach in a binary collision. Here, we develop a generalized collision operator that applies across the full range of magnetization strength. Since there is no closed-form solution for the scattering cross section when plasma is strongly magnetized, the input to the collision operator is obtained by numerically calculating particle trajectories. To demonstrate novel physics associated with strong magnetization, it is used to compute the friction force on a massive test charge. In addition to the traditional stopping power component, this is found to exhibit a transverse component that is perpendicular to both the velocity and Lorentz force vectors in the strongly magnetized regime, as was predicted recently using linear response theory. As a result, good agreement is found between the collision theory and linear response theory in the regime in which both apply, but the new collision theory also applies to stronger magnetization strength regimes than the linear response theory is expected to apply in.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extracting the number of short-range correlated nucleon pairs from inclusive electron scattering data

The extraction of the relative abundances of short-range correlated (SRC) nucleon pairs from inclusive electron scattering is studied using the generalized contact formalism (GCF) with several nuclear interaction models. GCF calculations can reproduce the observed scaling of the cross-section ratios for nuclei relative to deuterium at high xB and large Q 2 , a 2 =(σ A /A)/(σ d /2). In the nonrelativistic instant-form formulation, the calculation is very sensitive to the model parameters and only reproduces the data using parameters that are inconsistent with ab initio many-body calculations. Using a light-cone GCF formulation significantly decreases this sensitivity and improves the agreement with ab initio calculations. The ratio of similar mass isotopes, such as 40 Ca and 48 Ca, should be sensitive to the nuclear asymmetry dependence of SRCs, but is found to also be sensitive to low-energy nuclear structure. Thus the empirical association of SRC pair abundances with the measured a2 values is only accurate to about 20%. Finally, improving this will require cross-section calculations that reproduce the data while properly accounting for both nuclear structure and relativistic effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparative study of quarkonium transport in hot QCD matter

This document summarizes the efforts of the EMMI Rapid Reaction Task Force on “Suppression and (re)generation of quarkonium in heavy-ion collisions at the LHC”, centered around their 2019 and 2022 meetings. It provides a review of existing experimental results and theoretical approaches, including lattice QCD calculations and semiclassical and quantum approaches for the dynamical evolution of quarkonia in the quark-gluon plasma as probed in high-energy heavy-ion collisions. The key ingredients of the transport models are itemized to facilitate comparisons of calculated quantities such as reaction rates, binding energies, and nuclear modification factors. A diagnostic assessment of the various results is attempted and coupled with an outlook for the future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rotational relaxation contributions to infrared pressure broadening in ozone

The time-resolved IR double-resonance spectroscopy apparatus and procedures described by Millot et al. (1988) are used to measure the relaxation times of rotational levels in the v3 =1 state of O3. Findings reported include (1) total rotational cross sections about 20-70 percent larger than the Lennard-Jones collision cross section, consistent with an interaction dominated by dipole-dipole forces; (2) equal relaxation cross sections in the upper and lower vibrational states; (3) an estimated pressure-broadening cross section of 185 sq A, with less than 10 percent due to dephasing; (4) no strong Ka dependence of rotational relaxation rates at Ka = 4-8 in J of about 16; (5) a rate for J = 8 and Ka = 7 about 40 percent larger than the other values measured, in agreement with the pressure-broadening model of Gamache and Rothman (1985); and (6) a V-V energy-transfer rate between v3 = 1 and v1 = 1 of (2.5 + or - 0.5) x 10 to the 6th/torr sec.

Flannery, C.↗

SU(3) Gauge Symmetry: An Experimental Review of Diffractive Physics in e+p, p+p, p+ A, and A+A Collision Systems

This review focuses on diffractive physics, which involves the long-range interactions of strong nuclear force at high energies described by SU(3) gauge symmetry. It is expected that diffractive processes account for nearly 40% of the total cross-section at LHC energies. These processes consist of soft-scale physics where perturbation theory cannot be applied. Although highly successful and often described as a perfect theory, quantum chromodynamics relies heavily on perturbation theory, a model best suited for hard-scale physics. The study of pomerons could help bridge the soft and hard processes and provide a complete description of the theory of the strong interaction across the full momentum spectrum. Here, we will discuss some of the features of diffractive physics, experimental results from SPS, HERA, and the LHC, and where the field could potentially lead. With the recent publication of the odderon discovery in 2021 by the D0 and TOTEM collaborations and the new horizon of physics that lies ahead with the upcoming Electron-Ion Collider at Brookhaven National Laboratory, interest is seemingly piquing in high energy diffractive physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Are turbulence effects on droplet collision–coalescence a key to understanding observed rain formation in clouds?

Rain formation is a critical factor governing the lifecycle and radiative forcing of clouds and therefore it is a key element of weather and climate. Cloud microphysics–turbulence interactions occur across a wide range of scales and are challenging to represent in atmospheric models with limited resolution. Based on past experiments and idealized numerical simulations, it has been postulated that cloud turbulence accelerates rain formation by enhancing drop collision–coalescence. We provide substantial evidence for significant impacts of turbulence on the evolution of cloud droplet size distributions and rain formation by comparing high-resolution observations of cumulus congestus clouds with state-of-the-art large-eddy simulations coupled with a Lagrangian particle-based microphysics scheme. Turbulent coalescence must be included in the model to accurately represent the observed drop size distributions, especially for drizzle drop sizes at lower heights in the cloud. Turbulence causes earlier rain formation and greater rain accumulation compared to simulations with gravitational coalescence only. The observed rain size distribution tail just above cloud base follows a power law scaling that deviates from theoretical scalings considering either a purely gravitation collision kernel or a turbulent kernel neglecting droplet inertial effects, providing additional evidence for turbulent coalescence in clouds. In contrast, large aerosols acting as cloud condensation nuclei (“giant CCN”) do not significantly impact rain formation owing to their long timescale to reach equilibrium wet size relative to the lifetime of rising cumulus thermals. Overall, turbulent drop coalescence exerts a dominant influence on rain initiation in warm cumulus clouds, with limited impacts of giant CCN.

54 ENVIRONMENTAL SCIENCES↗

Dense granular flows with MFIX-Exa

This report extends the linear spring dashpot collision model the discrete element method available in MFIX-Exa to include static a static tangential friction force. Additionally, two rolling friction models frequently used in the literature are also implemented. The governing equations are provided with an emphasis on the new terms. The new model is validated by comparison to existing experimental data of single particle oblique collisions. The model is then tested on three dense granular flow problems: the formation of static piles, the discharge from a flat-bottom hopper and the self-induced granular Rayleigh-Taylor instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiative Energy Loss by Galactic Cosmic Rays

Interactions between galactic cosmic rays and matter are a primary focus of the NASA radiation problem. The electromagnetic forces involved are for the most part well documented. Building on previous research, this study investigated the relative importance of the weak forces that occur when a cosmic ray impinges on different types of materials. For the familiar electromagnetic case, it is known that energy lost in the form of radiation is more significant than that lost via contact collisions the rate at which the energy is lost is also well understood. Similar results were derived for the weak force case. It was found that radiation is also the dominant mode of energy loss in weak force interactions and that weak force effects are indeed relatively weak compared to electromagnetic effects.

Ahern, Sean C.↗

Constraints on Decreases in Eta Carinae's Mass-loss from 3D Hydrodynamic Simulations of Its Binary Colliding Winds

Recent work suggests that the mass-loss rate of the primary star Eta-A in the massive colliding wind binary Eta Carinae dropped by a factor of 2-3 between 1999 and 2010. We present result from large- (+/- 1545 au) and small- (+/- 155 au) domain, 3D smoothed particle hydrodynamics (SPH) simulations of Eta Car's colliding winds for three Eta-A mass-loss rates ( (dot-M(sub Eta-A) = 2.4, 4.8 and 8.5 × 10(exp −4) M(solar)/ yr), investigating the effects on the dynamics of the binary wind-wind collision (WWC). These simulations include orbital motion, optically thin radiative cooling and radiative forces. We find that dot-M Eta-A greatly affects the time-dependent hydrodynamics at all spatial scales investigated. The simulations also show that the post-shock wind of the companion star Eta-B switches from the adiabatic to the radiative-cooling regime during periastron passage (Phi approx.= 0.985-1.02). This switchover starts later and ends earlier the lower the value of dot-M Eta-A and is caused by the encroachment of the wind of Eta-A into the acceleration zone of Eta-B's wind, plus radiative inhibition of Eta-B's wind by Eta-A. The SPH simulations together with 1D radiative transfer models of Eta-A's spectra reveal that a factor of 2 or more drop in dot-M EtaA should lead to substantial changes in numerous multiwavelength observables. Recent observations are not fully consistent with the model predictions, indicating that any drop in dot- M Eta-A was likely by a factor of approx. < 2 and occurred after 2004. We speculate that most of the recent observed changes in Eta Car are due to a small increase in the WWC opening angle that produces significant effects because our line of sight to the system lies close to the dense walls of the WWC zone. A modest decrease in dot-M Eta-A may be responsible, but changes in the wind/stellar parameter of Eta-B, while less likely, cannot yet be fully ruled out. We suggest observations during Eta-Car's next periastron in 2014 to further test for decreases in dot-M Eta-A. If dot-M Eta-A is declining and continues to do so, the 2014 X-ray minimum should be even shorter than that of 2009.

Eta Carinae↗

Experimental Investigation of Flow Orientation Effects on Cryogenic Flow Boiling

Cryogenic flow boiling physics is of paramount importance for future cryogenic space applications employing Cryogenic Fluid Management (CFM) technologies. This experimental study investigates the two-phase flow and heat transfer performance of LN 2 flow boiling across five distinct flow orientations: vertical upflow, vertical downflow, horizontal flow, 45° inclined upflow, and 45° inclined downflow. The study employed the steady- state heating method within a circular heated tube featuring an 8.5-mm inner diameter and a 680-mm heated length. High-speed video recordings were utilized to capture two-phase flow patterns and interfacial behaviors across various flow orientations. The experiments covered a wide range of operating conditions, including mass velocities ranging from 351.80 to 1572.77 kg/m 2 s and inlet pressures from 297.14 to 1032.97 kPa, primarily with near-saturated inlet subcooling. Distinct two-phase flow patterns and regime transitions were identified for each flow orientation. Symmetrical flow patterns were evident in vertical orientations, whereas non-vertical orientations exhibited asymmetric flow stratifications, primarily influenced by the buoyancy force in a terrestrial gravity environment. Bubble dynamic parameters were quantified, and bubble collision and dispersion phenomena were visualized. Analyzing heat transfer performance based on local flow boiling curves and variations in heat transfer coefficients (HTCs), it was observed that vertical upflow demonstrated the most enhanced heat transfer performance, while vertical downflow exhibited the lowest. As mass velocity exceeded 830 kg/ m 2 s, the differences in heat transfer among orientations became less distinct, emphasizing the role of flow inertia in mitigating the influence of flow orientation. A direct comparison of microgravity HTC data from a recent study by the authors against the 1-𝘨 e HTC data indicated enhanced heat transfer performance in microgravity for flow orientation configurations in terrestrial gravity. However, this enhancement progressively diminished as the heat flux increased. Distinct HTC trends were observed as mass velocity increased for different flow orientations and gravity levels.

Cryogens↗

Probabilidad de que los murcielagos sufran barotraumatismo cerca de palas de aerogeneradores en movimiento (Spanish)

In October 2018, the International Energy Agency Wind Task 34 - Working Together to Resolve the Environmental Effects of Wind Energy (WREN) - organized a virtual forum to discuss the likelihood of bats experiencing barotrauma when flying near moving wind turbine blades. The forum included experts in bat biology and physiology, bat and wind turbine interactions, wind turbine technology, and atmospheric sciences. This educational brief summarizes the discussion during the forum and written comments from those who could not attend. Relevant literature was used to provide additional context when needed. Possible explanations regarding the direct cause of bat mortality at operating wind turbines are (1) blunt force trauma caused by turbine blades striking individual bats, often referred to as collisions, and (2) barotrauma, resulting from exposure to pressure changes located near the surface of moving wind turbine blades. While collision- related mortality is easily understood, the mechanism causing barotrauma is more complex. Fast-moving wind turbine blades create regions of high- and low-pressure variations along the blade surfaces. If bats fly within these regions, the rapid change in pressure may cause internal bleeding, damage to lungs or other organs, and damage to the inner ear. However, sufficient data demonstrating barotrauma as a common cause of bat mortality at wind turbines are lacking. Moreover, the pressure variation necessary to cause barotrauma in bats is so close to the surface of turbine blades that there is a higher probability of direct contact with the blades than of solely experiencing barotrauma. Regardless of the cause, bats are interacting with fast-moving wind turbine blades, and these interactions are resulting in fatalities. Resolving this issue will require a better understanding of bat behavior and cost-effective measures to reduce interactions between bats and wind turbines. This is the Spanish translation of NREL/FS-5000-84749, "The Likelihood of Bats Experiencing Barotrauma Near Moving Wind Turbine Blades."

barotrauma↗

Collisions between grains in a turbulent gas

Turbulent gas motions will induce random velocities of small dust grains that are imbedded in the gas. Within large eddies the friction forces from the gas lead to strongly correlated velocities for neighboring grains, whereas small eddies cause uncorrelated grain motions. The nonlinear response of a grain to eddy motion is calculated. This leads to a turbulent pressure within the dust component as well as to collisions between pairs of grains. The results are evaluated numerically for a Kolmogoroff spectrum and turbulent collision rates are calculated for molecular clouds and protostellar environments. Whereas grain-grain collisions should not modify the initial size distribution in molecular clouds to a significant extent, they will lead to an entirely different grain population in protostars.

Voelk, H. J.↗

Problems and research issues associated with the hybrid control of force and displacement

The hybrid control of force and position is basic to the science of robotics but is only poorly understood. Before much progress can be made in robotics, this problem needs to be solved in a robust manner. However, the use of hybrid control implies the existence of a model of the environment, not an exact model (as the function of hybrid control is to accommodate these errors), but a model appropriate for planning and reasoning. The monitored forces in position control are interpreted in terms of a model of the task as are the monitored displacements in force control. The reaction forces of the task of writing are far different from those of hammering. The programming of actions in such a modeled world becomes more complicated and systems of task level programming need to be developed. Sensor based robotics, of which force sensing is the most basic, implies an entirely new level of technology. Indeed, robot force sensors, no matter how compliant they may be, must be protected from accidental collisions. This implies other sensors to monitor task execution and again the use of a world model. This new level of technology is the task level, in which task actions are specified, not the actions of individual sensors and manipulators.

Paul, R. P.↗

Force balance near an X line in a collisionless plasma

The suggestion by Dungey (1988) that the gyroviscosity associated with gradients of the off-diagonal elements of the electron pressure tensor can balance a reconnection electric field along a magnetic X line in a collisionless plasma is investigated. The detailed balance of forces in the vicinity of an X line is evaluated using a two-dimensional magnetic field model and a simple model for particle motion. The results show that the gyroviscosity can indeed provide the force required to balance a reconnection electric field in that region, so that neither collisions nor wave turbulence are necessary for reconnection. The results also show that there should not be a significant increase in current from electron acceleration very near an X line. Reasonable numerical estimates are obtained for conditions expected in the vicinity of the distant X line in the geomagnetic tail.

Lyons, L. R.↗

Collision integrals for the interaction of the ions of nitrogen and oxygen in a plasma at high temperatures and pressures

The corrections to the transport cross-sections and collision integrals for Coulomb interactions arising from the application of realistic interaction energies of the ions of nitrogen and oxygen are investigated. Accurate potential-energy curves from an ab initio electronic-structure calculation and a semiclassical description of the scattering are used to determine the difference between the cross-sections for the real interaction forces and a Coulomb force for large values of the Debye shielding parameter. Graphs of the correction to the diffusion and viscosity-collision integrals are presented for temperatures from about 10,000 K to 150,000 K. This correction can be combined with tabulations of the collision integrals for shielded Coulomb potentials to determine the contribution of N(+)-N(+), N(+)-O(+), and O(+)-O(+) interactions to the transport properties of high-temperature air. Analytical forms are fitted to the calculated results to assist this application.

Stallcop, James R.↗