Search NASA⌕ Search

SEARCH · Search NASA

Results for “forest height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Estimating Bare Earth in Sparse Boreal Forests With WorldView Stereo Imagery

Circumboreal forests are currently experiencing rapid climate warming which is altering their structure, productivity, and status as a carbon sink. Very-high resolution (VHR, <2 m) stereo derived digital surface models are available to monitor these forests, but, a similar resolution digital terrain model (DTM) is required to extract information about tree height, which is often used to estimate carbon content. To our knowledge, no openly available VHR DTM currently exists. To address this need, we developed approaches to extract DTMs by filtering VHR stereo point clouds (PCs) in sparse canopies of Alaska. Our evaluation consisted of two stereo processing methods with three PC search radii, at six different tree canopy cover (TCC) intervals. We found VHR DTMs were robust for estimating bare ground at TCC intervals less than 40% with vertical errors <1.6 m using airborne small footprint light detection and ranging (LiDAR) as reference.

Christopher S. R. Neigh↗
NASA NTRS2001

Estimation of comprehensive forest variable sets from multiparameter SAR data over a large area with diverse species

Polarimetric and multifrequency data from the NASA/JPL airborne synthetic aperture radar (AIRSAR) have been used in a multi-tier estimation algorithm to calculate a comprehensive set of forest canopy properties including branch layer moisture and thickness, trunk density, trunk water content and diameter, trunk height, and subcanapy soil moisture. The estimation algorithm takes advantage of species-specific allometric relations, and is applied to a 100Km x 100Km area in the Canadian boreal region containing many different vegetation species types. The results show very good agreement with ground measurements taken at several focused and auxiliary study sites. This paper expands on the results reported in [1] and applies the algorithm on the regional scale.

variable estimation forestry multiparameter SAR↗
NASA NTRS2018

Mangrove Canopy Height Globally Related to Precipitation, Temperature and Cyclone Frequency

Mangrove wetlands are among the most productive and carbon-dense ecosystems in the world. Their structural attributesvary considerably across spatial scales, yielding large uncertainties in regional and global estimates of carbon stocks. Here, wepresent a global analysis of mangrove canopy height gradients and aboveground carbon stocks based on remotely sensed measurementsand field data. Our study highlights that precipitation, temperature and cyclone frequency explain 74% of the globaltrends in maximum canopy height, with other geophysical factors influencing the observed variability at local and regionalscales. We find the tallest mangrove forests in Gabon, equatorial Africa, where stands attain 62.8 m. The total global mangrovecarbon stock (above- and belowground biomass, and soil) is estimated at 5.03 Pg, with a quarter of this value stored inIndonesia. Our analysis implies sensitivity of mangrove structure to climate change, and offers a baseline to monitor nationaland regional trends in mangrove carbon stocks.

Simard, Marc↗
NASA NTRS2020

A Multi-scaled Analysis of Forest Structure using Individual-Based Modeling in a Costa Rican Rainforest

Consideration of scale is essential when examining structural relationships in forests. In this study, we present a parameterization of the FORMIND individual-based forest model for old growth Atlantic lowland rainforest in La Selva, Costa Rica. Results show that the simulated forest reproduces the structural complexity of Costa Rican rainforest within 2.3% of aboveground biomass values, based on comparisons with CARBONO inventory plot data. The Costa Rica FORMIND simulation was then used to investigate the relationship between canopy height and aboveground biomass (AGB), leaf area index (LAI) and gross primary productivity (GPP) at different spatial scales (20 × 20 m, 60 × 60 m, 100mx100m). The relationship between aboveground biomass and height is of particular importance toward the calibration of various remote sensing products including lidar and radar, whereas the LAI and GPP relationships are understudied in this context. We found that the relationship between all three variables and height varies considerably: the relationship is stronger at finer scales and weaker at coarser resolution. However, in all three comparisons, RMSE also decreased as scales coarsened, with the largest difference shown between 100 m and 10 m resolutions in relating AGB to Lorey's height (R^2 decreased by 0.3; RMSE decreased by 114.5 Mg/ha). This suggests that a trade-off between accuracy and precision exists, and further highlights the importance of spatial scale in determining the relatability of forest structure variables.

A.H.Armstrong↗
NASA NTRS2011

3D Vegetation Mapping Using UAVSAR, LVIS, and LIDAR Data Acquisition Methods

The overarching objective of this ongoing project is to assess the role of vegetation within climate change. Forests capture carbon, a green house gas, from the atmosphere. Thus, any change, whether, natural (e.g. growth, fire, death) or due to anthropogenic activity (e.g. logging, burning, urbanization) may have a significant impact on the Earth's carbon cycle. Through the use of Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) and NASA's Laser Vegetation Imaging Sensor (LVIS), which are airborne Light Detection and Ranging (LIDAR) remote sensing technologies, we gather data to estimate the amount of carbon contained in forests and how the content changes over time. UAVSAR and LVIS sensors were sent all over the world with the objective of mapping out terrain to gather tree canopy height and biomass data; This data is in turn used to correlate vegetation with the global carbon cycle around the world.

Uninhabited Aerial Vehicle Synthetic Aperture Rada↗
NASA NTRS2018

Mangrove Canopy Height Globally Related to Precipitation and Cyclone Frequency

Mangrove wetlands are among the most productive and carbon-dense ecosystems in the world. Their structural attributes vary considerably across spatial scales, yielding large uncertainties in regional and global estimates of carbon stocks. Here, we present a global analysis of mangrove canopy height gradients and aboveground carbon stocks based on remotely sensed measurements and field data. Our study highlights that precipitation, temperature and cyclone frequency explain 74% of the global trends in maximum canopy height, with other geophysical factors influencing the observed variability at local and regional scales. We find the tallest mangrove forests in Gabon, equatorial Africa, where stands attain 62.8 m. The total global mangrove carbon stock (above- and belowground biomass, and soil) is estimated at 5.03 Pg, with a quarter of this value stored in Indonesia. Our analysis implies sensitivity of mangrove structure to climate change, and offers a baseline to monitor national and regional trends in mangrove carbon stocks.

Carbon cycle↗
NASA NTRS1987

Correlation between aircraft MSS and lidar remotely sensed data on a forested wetland

Inland wetland in a portion of the Savannah River swamp forest were mapped with an overall accuracy of 88.5 percent on April 26,l985 using high resolution aircraft Daedalus AADS-1268 MSS data. In addition, data were acquired using a NASA sensor system flown along two flight lines over the Steel Creek Delta. The data were significantly correlated with in situ tree height measurements. The data were registered to the wetland classification map and correlated. Statistical analyses demonstrated that the laser derived canopy height information was significantly associated with the Steel Creek Delta wetland classes encountered along the transect (an F-value of 58.46 at the 0.0001 level of confidence). The relationship between vegetation height and vegetation type was then used to produce a three-dimensional model of the landscape which can be of value when computing biomass or canopy density in this forested wetland environment.

Jensen, John R.↗
NASA NTRS2018

Estimating Mangrove Aboveground Biomass from Airborne LiDAR Data: a Case Study from the Zambezi River Delta

Mangroves are ecologically and economically important forested wetlands with the highest carbon (C) density of all terrestrial ecosystems. Because of their exceptionally large C stocks and importance as a coastal buffer, their protection and restoration has been proposed as an effective mitigation strategy for climate change. The inclusion of mangroves in mitigation strategies requires the quantification of C stocks (both above and belowground) and changes to accurately calculate emissions and sequestration. A growing number of countries are becoming interested in using mitigation initiatives, such as REDD+ (reducing emissions from deforestation and forest degradation), in these unique coastal forests. However, it is not yet clear how methods to measure C traditionally used for other ecosystems can be modified to estimate biomass in mangroves with the precision and accuracy needed for these initiatives. Airborne Lidar (ALS) data has often been proposed as the most accurate way for larger scale assessments but the application of ALS for coastal wetlands is scarce, primarily due to a lack of contemporaneous ALS and field measurements. Here, we evaluated the variability in field and Lidar-based estimates of aboveground biomass (AGB) through the combination of different local and regional allometric models and standardized height metrics that are comparable across spatial resolutions and sensor types, the end result being a simplified approach for accurately estimating mangrove AGB at large scales and determining the uncertainty by combining multiple allometric models.We then quantified wall-to-wall AGB stocks of a tall mangrove forest in the Zambezi Delta, Mozambique. Our results indicate that the Lidar H100 height metric correlates well with AGB estimates, with R(exp 2) between 0.80 and 0.88 and RMSE of 33% or less. When comparing Lidar H100 AGB derived from three allometric models, mean AGB values range from 192 Mg ha(exp −1) up to 252 Mg ha(exp −1).We suggest the best model to predict AGB was based on the East Africa specific allometry and a power-based regression that used Lidar H100 as the height input with an R(exp 2) of 0.85 and an RMSE of 122 Mg ha(exp −1) or 33%. The total AGB of the Lidar inventoried mangrove area (6654 ha) was 1 350 902 Mg with a mean AGB of 203 Mg ha(exp −1) +/-166 Mg ha(exp −1). Because the allometry suggested here was developed using standardized height metrics, it is recommended that the models can generate AGB estimates using other remote sensing instruments that are more readily accessible over other mangrove ecosystems on a large scale, and as part of future carbon monitoring efforts in mangroves.

Fatoyinbo, Temilola↗
NASA NTRS1998

Relating Vegetation Aerodynamic Roughness Length to Interferometric SAR Measurements

In this paper, we investigate the feasibility of estimating aerodynamic roughness parameter from interferometric SAR (INSAR) measurements. The relation between the interferometric correlation and the rms height of the surface is presented analytically. Model simulations performed over realistic canopy parameters obtained from field measurements in boreal forest environment demonstrate the capability of the INSAR measurements for estimating and mapping surface roughness lengths over forests and/or other vegetation types. The procedure for estimating this parameter over boreal forests using the INSAR data is discussed and the possibility of extending the methodology over tropical forests is examined.

Saatchi, Sassan↗
NASA NTRS2017

Biomass Retrieval from L-Band Polarimetric UAVSAR Backscatter and PRISM Stereo Imagery

The forest above-ground biomass (AGB) and spatial distribution of vegetation elements have profound effects on the productivity and biodiversity of terrestrial ecosystems. In this paper, we evaluated biomass estimation from L-band Synthetic Aperture Radar (SAR) data acquired by National Aeronautics and Space Administration (NASA) Uninhabited Aerial Vehicle SAR (UAVSAR) and the improvement of accuracy by adding canopy height information derived from stereo imagery acquired by Japan Aerospace Exploration Agency (JAXA) Panchromatic Remote Sensing Instrument for Stereo Mapping (PRISM) on-board the Advanced Land Observing Satellite (ALOS). Various models for prediction of forest biomass from UAVSAR data were investigated at pixel sizes of 1/4 ha (50 m x 50 m) and 1 ha. The variance inflation factor (VIF) was calculated for each of the explanatory variables in multivariable regression models to assess the multi-collinearity between explanatory variables. In addition, the t-and p-values were used to interpret the significance of the coefficients of each explanatory variables. The R(exp. 2), Root Mean Square Error (RMSE), bias and Akaike information criterion (AIC), and leave-one-out cross-validation (LOOCV) and bootstrapping were used to validate models. At 1/4-ha scale, the R(exp. 2) and RMSE of biomass estimation from a model using a single track of polarimetric UAVSAR data were 0.59 and 52.08 Mg/ha. With canopy height from PRISM as additional independent variable, R(exp. 2) increased to 0.76 and RMSE decreased to 39.74 Mg/ha (28.24%). At 1-ha scale, the RMSE of biomass estimation based on UAVSAR data of a single track was 39.42 Mg/ha with a R(exp. 2) of 0.77. With the canopy height from PRISM, R(exp. 2) increased to 0.86 and RMSE decreased to 29.47 Mg/ha (20.18%). The models using UAVSAR data alone underestimated biomass at levels above approximately 150 Mg/ha showing the saturation phenomenon. Adding canopy height from PRISM stereo imagery significantly improved the biomass estimation and elevated the saturation level in estimating biomass. Combined use of UAVSAR data acquired from opposite directions (odd and even tracks) slightly improved the biomass estimation.Combined use of UAVSAR data acquired from opposite directions (odd and even tracks) slightly improved the biomass estimation at 1/4-ha scale, R(exp. 2) increased from 0.59 to 0.66 and RMSE reduced from 52.08 to 48.57 Mg/ha. Averaging multiple acquisitions of UAVSAR data from the same look azimuth direction did not improve biomass estimation. A biomass map derived from NASA's LVIS (Laser Vegetation Imaging System) wave-form data was used as a reference for evaluation of the biomass maps from these models. The study has also shown that the errors decreased when deciduous, evergreen, and mixed forests were modeled separately but the improvement was not significant

Zhang, Zhiyu↗
NASA NTRSDate not supplied

Global Carbon Consumption Database for Wildland Fire

Fire significantly impacts both human-altered and wild landscapes on national and global scales. Though often devastating, wildland fires naturally reduce fuels, preventing larger wildfires. However, their smoke can harm human health locally and globally. To understand its impact on air quality and health, quantifying the emissions released into the atmosphere is crucial. To accurately model fire emissions, understanding fuel characteristics and burning conditions is crucial, as they vary with the fuelbed type and fire weather. For example, savanna fires have lower carbon loading and intensity but spread quickly, while boreal forest fires burn longer and release more carbon due to higher loading. Hotter, drier conditions increase fuel consumption and smoke plume height. Fire weather and available fuel are the key drivers of emissions.

Emily Gargulinski↗
NASA NTRS1992

Temporal decorrelation in repeat pass-radar interferometry

Correlation in pass-to-pass, interferometric radar can be degraded by thermal noise, lack of parallelism between the radar flight tracks, spatial baseline noise, and surficial change. The effects of decorrelation due to thermal noise can be easily evaluated and removed, while those due slight angular changes between flight tracks are negligible for data acquired using near-repeat orbits. Empirical results obtained using images of Death Valley confirm that as the baseline increases, the overall correlation decreases due to spatial baseline noise. It is shown that areas of Cottonball Basin in Death Valley remained unchanged over the three-week period for which data was obtained, while a heavily forested area in Oregon exhibited significant temporal decorrelation. Lava in central Oregon also appeared to decorrelate. The results demonstrate that generation of height maps of heavily vegetated areas using pass-to-pass interferometry is practical, provided that the time between passes is at most several weeks.

Villasenor, John↗
NASA NTRS2003

Full-Waveform, Wide-Swath Lidar Imaging of Forested and Urban Areas in Leaf-On Conditions: Development, Results and Future Direction

Full-Waveform lidar measurements provide unprecedented views of the vertical and horizontal structure of vegetation and the topography of the Earth s surface. Utilizing a high signal-to-noise ratio lidar system, larger than typical laser footprints (10-20 m), and the recorded time history of interaction between a short-duration (approx. 10 ns) pulse of laser light and the surface of the Earth, full-waveform lidar is able to simultaneously image sub-canopy topography as well as the vertical structure of any overlying vegetation. These data reveal the true 3-D vegetation structure in leaf-on conditions enabling important biophysical parameters such as above-ground biomass to be estimated with unprecedented accuracy. An airborne lidar mission was conducted July-August 2003 in support of the North America Carbon Program. NASA s Laser Vegetation Imaging Sensor (LVIS) was used to image approximately 2,000 km$^2$ in Maine, New Hampshire, Massachusetts and Maryland. Areas with available ground and other data were included (e.g., experimental forests, FLUXNET sites) in order to facilitate as many bio- and geophysical investigations as possible. Data collected included ground elevation and canopy height measurements for each laser footprint, as well as the vertical distribution of intercepted surfaces. Data will be publicly distributed within 6- 12 months of collection. Further details of the mission, including the lidar system technology, the locations of the mapped areas, and examples of the numerous data products that can be derived from the return waveform data products will be presented. Future applications including detection of ground and vegetation canopy changes and a spaceborne implementation of wide-swath, full-waveform imaging lidar will also be discussed.

Blair, James B.↗
NASA NTRS2007

Advanced NASA Earth Science Mission Concept for Vegetation 3D Structure, Biomass and Disturbance

Carbon in forest canopies represents about 85% of the total carbon in the Earth's aboveground biomass (Olson et al., 1983). A major source of uncertainty in global carbon budgets derives from large errors in the current estimates of these carbon stocks (IPCC, 2001). The magnitudes and distributions of terrestrial carbon storage along with changes in sources and sinks for atmospheric C02 due to land use change remain the most significant uncertainties in Earth's carbon budget. These uncertainties severely limit accurate terrestrial carbon accounting; our ability to evaluate terrestrial carbon management schemes; and the veracity of atmospheric C02 projections in response to further fossil fuel combustion and other human activities. Measurements of vegetation three-dimensional (3D) structural characteristics over the Earth's land surface are needed to estimate biomass and carbon stocks and to quantify biomass recovery following disturbance. These measurements include vegetation height, the vertical profile of canopy elements (i.e., leaves, stems, branches), andlor the volume scattering of canopy elements. They are critical for reducing uncertainties in the global carbon budget. Disturbance by natural phenomena, such as fire or wind, as well as by human activities, such as forest harvest, and subsequent recovery, complicate the quantification of carbon storage and release. The resulting spatial and temporal heterogeneity of terrestrial biomass and carbon in vegetation make it very difficult to estimate terrestrial carbon stocks and quantify their dynamics. Vegetation height profiles and disturbance recovery patterns are also required to assess ecosystem health and characterize habitat. The three-dimensional structure of vegetation provides habitats for many species and is a control on biodiversity. Canopy height and structure influence habitat use and specialization, two fundamental processes that modify species richness and abundance across ecosystems. Accurate and consistent 3D measurements of forest structure at the landscape scale are needed for assessing impacts to animal habitats and biodiversity following disturbance.

Ranson, K. Jon↗
NASA NTRS2014

An Efficient, Multi-Layered Crown Delineation Algorithm for Mapping Individual Tree Structure Across Multiple Ecosystems

Deriving individual tree information from discrete return, small footprint LiDAR data may improve forest above ground biomass estimates, and provide tree-level information that is important in many ecological studies. Several crown delineation algorithms have been developed to extract individual tree information from LiDAR point clouds or rasterized canopy height models (CHM), but many of these algorithms have difficulty discriminating between overlapping crowns, and also may fail to detect understory trees. Our approach uses a watershed based delineation of a CHM, which is subsequently refined using the LiDAR point cloud. Individual tree detection was validated with stem mapped field data from the Smithsonian Environmental Research Center (SERC), Maryland, and on a plot and stand level through comparisons of stem density and basal area to delineated metrics at both SERC and a study area in the Sierra Nevada, California. For individual tree detection, the algorithm correctly identified 70% of dominant trees, 58% of co-dominant trees, 35% of intermediate trees and 21% of suppressed trees at SERC. The algorithm had difficulty distinguishing between crowns of small, dense understory trees of approximately the same height. Delineated crown volume alone explained 53% and 84% of the variability in basal area at the SERC and Sierra Nevada sites, respectively. The algorithm produced crown area distributions comparable to diameter at breast height (DBH) size class distributions observed in the field in both study sites. The algorithm detected understory crowns better in the conifer-dominated Sierra Nevada site than in the closed-canopy deciduous site in Maryland. The ability for the algorithm to reproduce both accurate tree size distributions and individual crown geometries in two dissimilar and complex forests suggests great promise for applicability to a wide range of forest systems.

LiDAR↗
NASA NTRS2010

Quantitative Measures of Immersion in Cloud and the Biogeography of Cloud Forests

Sites described as tropical montane cloud forests differ greatly, in part because observers tend to differ in their opinion as to what constitutes frequent and prolonged immersion in cloud. This definitional difficulty interferes with hydrologic analyses, assessments of environmental impacts on ecosystems, and biogeographical analyses of cloud forest communities and species. Quantitative measurements of cloud immersion can be obtained on site, but the observations are necessarily spatially limited, although well-placed observers can examine 10 50 km of a mountain range under rainless conditions. Regional analyses, however, require observations at a broader scale. This chapter discusses remote sensing and modeling approaches that can provide quantitative measures of the spatiotemporal patterns of cloud cover and cloud immersion in tropical mountain ranges. These approaches integrate remote sensing tools of various spatial resolutions and frequencies of observation, digital elevation models, regional atmospheric models, and ground-based observations to provide measures of cloud cover, cloud base height, and the intersection of cloud and terrain. This combined approach was applied to the Monteverde region of northern Costa Rica to illustrate how the proportion of time the forest is immersed in cloud may vary spatially and temporally. The observed spatial variation was largely due to patterns of airflow over the mountains. The temporal variation reflected the diurnal rise and fall of the orographic cloud base, which was influenced in turn by synoptic weather conditions, the seasonal movement of the Intertropical Convergence Zone and the north-easterly trade winds. Knowledge of the proportion of the time that sites are immersed in clouds should facilitate ecological comparisons and biogeographical analyses, as well as land use planning and hydrologic assessments in areas where intensive on-site work is not feasible.

Lawton, R. O.↗
NASA NTRS1977

Assessment of forest plantations from low altitude aerial photography

Vertical color, and color-infrared, aerial photography obtained from altitudes between 183 m and 915 m provide a cost effective method of determining tree survival and height growth in pine plantations on the North Carolina Coastal Plain. All interpretations were performed by professional forestry personnel from the original 70 mm color transparencies. Prompt assessment of tree survival is necessary if failed spots are to be successfully replanted. Counts of living trees made after the third growing season, and sometimes only two growing seasons after planting, are accurate enough to permit planning of replanting operations without extensive ground surveys.

Nelson, H. A.↗
NASA NTRS2022

Predicting Antarctic Net Snow Accumulation at the Kilometer Scale and Its Impact on Observed Height Changes

Sub-grid-scale processes occurring at or near the surface of an ice sheet have a potentially large impact on local and integrated net accumulation of snow via redistribution and sublimation. Given observational complexity, they are either ignored or parameterized over large-length scales. Here, we train random forest (RF) models to predict variability in net accumulation over the Antarctic Ice Sheet using atmospheric variables and topographic characteristics as predictors at 1 km resolution. Observations of net snow accumulation from both in situ and airborne radar data provide the input observable targets needed to train the RF models. We find that local net accumulation deviates by as much as 172% of the atmospheric model mean. The correlation in space between the predicted net accumulation variability and satellite-derived surface-height change indicates that surface processes operate differently through time, driven largely by the seasonal anomalies in snow accumulation.

Antarctic↗