SEARCH · Search NASA

Results for “frequency range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Member vibration effects on LSS behavior

This paper evaluates the sensitivity of modal characteristics of large deployable lattice-type space structures to joint boundary conditions. The evaluation of joint rotational boundary conditions is accomplished by a review of modal strain energy among elements of the analytic dynamic model. This review shows that space structure designs having no bending energy in lattice members in the low frequency range are insensitive to joint rotational boundary conditions in that frequency range. Evaluation of joint translation boundary conditions is accomplished by the 'modal freeplay method' which is described in this paper. The modal freeplay method relates modal frequency to joint translational freeplay and to amplitude of applied forces.

White, Charles W.↗

NASA NTRS1982

Chorus-related electrostatic bursts in the earth's outer magnetosphere

Studies of wideband plasma wave data from the ISEE 1 and ISEE 2 spacecraft are reported which reveal that whistler-mode chorus emissions in the earth's outer magnetosphere are often accompanied by high-frequency bursts of electrostatic noise. The chorus features that correlate to the electrostatic bursts have a hook-like frequency-time variation in the frequency range 200-400 Hz, and the associated electrostatic bursts have a frequency range of about 4-8 kHz. In some cases these electrostatic bursts have a harmonic frequency structure with a frequency spacing corresponding to the chorus frequency. This harmonic structure apparently results from the fact that the burst intensity is modulated at the chorus frequency.

Reinleitner, L. A.↗

NASA NTRS1976

Dual frequency feed system for the CTS communications link characterization experiment

The developing, testing and installation of a dual frequency feed assembly were described. The feed has been designed to receive signals in the frequency range 11.7 to 12.2 GHz and transmit signals in the frequency range 14.12 GHz plus or minus 250 MHz. Complete performance data of the feed alone and installed in the 15 foot antenna is included herein. Drawings and descriptive information of the feed assembly are also given.

Gill, G. J.↗

NASA NTRS1994

Low-frequency magnetic fluctuation spectra in the magnetosheath and plasma depletion layer

Recent observations have delineated several different kinds of enhanced magnetic fluctuation spectra below the proton cyclotron frequency in the terrestrial magnetosheath. A model is presented that represents the variation of plasma parameters across the plasma depletion layer and into the magnetosheath proper. Using this model, we find that many of the properties of the observed spectra follow directly from the predictions of linear Vlasov instability theory. The observed progression of spectral features is a natural progression from mirror mode to merged (in frequency range) proton and He(2+) cyclotron modes to bifurcated (in frequency range) cyclotron modes as plasma convects earthward in the magnetosheath. The necessary change in dispersion surface topology from separated proton and He(2+) cyclotron surfaces at low beta to merged surfaces at high beta is described.

Denton, Richard E.↗

NASA NTRS2024

Overview of Integrated Random Vibration Testing of the NASA Orion Crew Survival Suit

The launch ascent and abort random vibration environments from NASA’s Orion spacecraft drove the need to test the NASA Orion Crew Survival Suit as an integrated system with exposure to the design levels. In order to properly characterize component responses, a series of integrated tests were designed to incorporate the interaction between a crew member, suit, seat, and the attenuation system. The first Development Test (2017) included human subjects, and was performed with early development seat and suit components, and low level inputs. It provided a baseline for frequency response and behavior of the integrated system. The next two tests, Development Test (2019) and Qualification Test (2020), used manikin surrogates to represent the crew member and increasing levels of component hardware fidelity in order to test to higher input levels. Testing was performed at NASA Johnson Space Center (JSC) and Kennedy Space Center (KSC) Vibration Labs and provided the input levels required to represent the ascent and abort vehicle profiles as well as recorded component response behavior from accelerometer instrumentation and high speed cameras. Inspection of the suit and related components showed that for all seat orientations, and input environments, no damage occurred. Additional pre and post-test checks confirmed the functionality of all suited hardware. Response data of the suited components generally showed heavy attenuation across most of the tested frequency range. Transmissibility plots showed some amplification of components at lower frequency ranges. Overall this series of integrated tests showed that 1) the use of surrogate manikins in the tests were adequate for representing crew in a vibration environment, 2) full vibration levels for ascent and abort were heavily attenuated in the suit components and were non-damaging, and 3) the suit and related components are qualified for the Orion random vibration environments.

Jeffrey D Suhey↗

NASA NTRSDate not supplied

Overview of Integrated Random Vibration Testing of the NASA Orion Crew Survival Suit

Jeffrey Suhey↗

DOE OSTI2025

Toroidal modeling of Alfvén eigenmodes excited by runaway electrons in DIII-D and ITER

The non-perturbative MHD-kinetic hybrid code MARS-K (Liu et al 2014 Phys. Plasmas 21 056105) is updated to include relativistic effects for kinetic fast particles, enabling the code to model excitation of Alfvén eigenmodes (AEs) by runaway electrons (REs) in post-disruption tokamak plasmas. Applying the updated code to RE beams in both DIII-D and ITER, a zoo of AE modes triggered by trapped REs due to precessional drift-kinetic resonances is computed while scanning the RE energy. At fixed RE energy, multiple unstable roots are also excited. These AE modes possess radially different eigenmode structures, ranging from global modes to core-localized ones. The computed mode frequency is in the Alfvén frequency range, increasing with the assumed RE energy in a staircase fashion and quantitatively matching the experimental measurement (in DIII-D). At the (more relevant) high-frequency range (above 1 MHz), the modeled eigenmodes are identified as compressional AEs (CAEs) in DIII-D and a mixture of CAE and shear Alfvén waves in ITER.

Alfvén eigenmodes↗

NASA NTRS1995

The anisotropy in the xosmic microwave background at degree angular scales

We detect anisotropy in the cosmic microwave background (CMB) at degree angular scales and confirm a previous detection reported by Wollack et al. (1993). The root-mean-squared amplitude of the fluctuations is 44(sup+13)(sub -7)microK. This may be expressed as the square root of the angular power spectrum in a band of multiples between l(sub eff)=69(sup +29)(sub -22). We find delta T(sub l) = square root of (l(2l+1) expected value of ((absolute value of (a(sup m)(sub L)))(exp 2))/(4xpi))= 42(sup +12)(sub -7). The measured spectral index of the fluctuations is consistent with zero, the value expected for the CMB. The spectral index corresponding to Galactic free-free emission, the most likely foreground contaminant, is rejected at approximately 3 sigma. The analysis is based on three independent data sets. The first, taken in 1993, spans the 26-36 GHz frequency range with three frequency bands; the second was taken with the same radiometer as the first but during an independent observing campaign in 1994; and the third, also taken in 1994, spans the 36-46 GHz range in three bands. For each telescope position and radiometer channel, the drifts in the instrument offset are less than or equal to 4 microK/day averaged over a period of 1 month. The dependence of the inferred anisotropy on the calibration and data editing is addressed.

Netterfield, C. B.↗

NASA NTRS1978

Traveling wave tube circuit

A traveling wave tube (TWT) has a slow wave structure (SWS) which is severed into two or more sections. A signal path, connects the end of an SWS section to the beginning of the following SWS section. The signal path comprises an impedance matching coupler (IMC), followed by an isolator, a variable phase shifter, and a second IMC. The aggregate band pass characteristic of the components in the signal path is chosen to reject, or strongly attenuate, all frequencies outside the desired operating frequency range of the TWT and yet pass, with minimal attenuation in the forward direction, all frequencies within the desired operating frequency range. The isolator is chosen to reject, or strongly attenuate, waves, of all frequencies, which propagate in the backward direction. The aggregate phase shift characteristic of the components in the signal path is chosen to apply signal power to the beginning of the following SWS section with the phase angle yielding maximum efficiency.

Connolly, D. J.↗

NASA NTRS1972

A search for the effect of a high frequency spark on boundary-layer transition at Mach 8.5

An experimental investigation of the use of a high frequency spark to promote early boundary layer transition on a wind tunnel model was conducted at a Mach number of 8.5. Test variables included four electrode configurations, a frequency range from 10 kHz to 50 kHz, and various power inputs to the spark. The general conclusion obtained from this investigation is that over the parameter range, the high frequency spark is ineffective in inducing early transition at the test Mach number.

Anders, J. B.↗

NASA NTRS1973

Full-scale experiments with an ejector to reduce jet engine exhaust noise

Experiments with a modified J65 turbojet engine and ejector resulted in noise power reductions as large as 13 decibels in the low-frequency range. High-frequency noise power, which appeared to originate mainly from the mixing processes within the ejector, increased. Peak velocities at the ejector exit were reduced by one-half to two-thirds, although survey rakes showed that mixing was not complete. Acoustical lining inside the ejector would reduce the perceived noise level (in PNdB) by removing much of the high-frequency noise.

Clark, B. J.↗

NASA NTRS1976

A dynamic pressure source for the calibration of pressure transducers

A dynamic pressure source is described for producing sinusoidally varying pressures of up to 34 kPa zero to peak, over the frequency range of approximately 50 Hz to 2 kHz. The source is intended for the dynamic calibration of pressure transducers. The transducer to be calibrated is mounted near the base of the thick walled aluminum tube forming the vessel so that the pressure sensitive element is in contact with the liquid in the tube. A section of the tube is filled with small steel balls to damp the motion of the 10-St dimethyl siloxane working fluid in order to extend the useful frquency range to higher frequencies than would be provided by an undamped system. The dynamic response of six transducers provided by the sponsor was evaluated using the pressure sources; the results of these calibrations are given.

Vezzetti, C. F.↗

NASA NTRS1992

CRRES plasma wave experiment

The CRRES plasma wave experiment is designed to provide information on the plasma wave environment and the total plasma density in the Earth's radiation belts and throughout the CRRES orbit. This information is valuable both for studying the naturally occurring wave-particle interactions affecting the plasma and particle environment in the plasmasphere and magnetosphere as well as for studying the chemical releases. The electric field sensors for this instrument consist of two long electric dipole antennas (about 100 m tip-to-tip), and the magnetic field sensor is a search coil magnetometer mounted at the end of a 6-m boom. The instrument has a 14-channel spectrum analyzer covering the frequency range from 5.6 Hz to 10 kHz, and a 128-step sweep frequency receiver covering the frequency range from 100 Hz to 400 kHz.

Anderson, Roger R.↗

NASA NTRS1993

Optimization of microscopic and macroscopic second order optical nonlinearities

Nonlinear optical materials (NLO) can be used to extend the useful frequency range of lasers. Frequency generation is important for laser-based remote sensing and optical data storage. Another NLO effect, the electro-optic effect, can be used to modulate the amplitude, phase, or polarization state of an optical beam. Applications of this effect in telecommunications and in integrated optics include the impression of information on an optical carrier signal or routing of optical signals between fiber optic channels. In order to utilize these effects most effectively, it is necessary to synthesize materials which respond to applied fields very efficiently. In this talk, it will be shown how the development of a fundamental understanding of the science of nonlinear optics can lead to a rational approach to organic molecules and materials with optimized properties. In some cases, figures of merit for newly developed materials are more than an order of magnitude higher than those of currently employed materials. Some of these materials are being examined for phased-array radar and other electro-optic switching applications.

Marder, Seth R.↗

NASA NTRS1994

Ground based studies of thermocapillary flows in levitated drops

Analytical studies along with ground-based experiments are presently being carried out in connection with thermocapillary phenomena associated with drops and bubbles in a containerless environment. The effort here focuses on the thermal and the fluid phenomena associated with the local heating of acoustically levitated drops, both at 1-g and at low-g. In particular, the Marangoni effect on drops under conditions of local spot-heating and other types of heating are being studied. With the experiments conducted to date, fairly stable acoustic levitation of drops has been achieved and successful flow visualization by light scattering from smoke particles has been carried out. The results include situations with and without heating. As a preliminary qualitative interpretation of these experimental results, we consider the external flow pattern as a superposition of three discrete circulation cells operating on different spatial scales. The observations of the flow fields also indicate the existence of a steady state torque induced by the streaming flows. The theoretical studies have been concentrated on the analysis of streaming flows in a gaseous medium with the presence of a spherical particle undergoing periodic heating. A matched asymptotic analysis was carried out for small parameters derived from approximations in the high frequency range. The heating frequency being 'in tune' with the acoustic frequency results in a nonzero time-averaged thermal field. This leads to a steady heat flow across the equatorial plane of the sphere.

Sadhal, Satwindar Singh↗

NASA NTRS1961

Study of Flow Over Oscillating Airfoil Models at a Mach Number of 7.0 in Helium

A wind-tunnel study of unsteady flow at a Mach number of 7 in helium has been conducted on several sting-mounted wedge, double-wedge, and flat-plate airfoil models with three different leading-edge radii. The data were obtained by taking high-speed schlieren motion pictures of the decaying motion of the model as it was released from an initial deflection. The shock-wave position observed on the sharp-leading-edge models during the oscillation was compared with that obtained by use of unsteady flow theory as well as steady-state theory. Comparison of theoretical results indicated that no unsteady-flow effects exist over the range of reduced frequencies k, 0.007 less than equal than k less than or equal 0.030, studied experimentally. The experimental results confirmed this finding as no unsteady-flow effects were detected in this reduced-frequency range. Comparison of shock-wave positions measured for the blunt models with those calculated by steady-state methods indicated fair agreement.

Arman, Ali↗

NASA NTRS2003

Sound Generation by Aircraft Wake Vortices

This report provides an extensive analysis of potential wake vortex noise sources that might be utilized to aid in their tracking. Several possible mechanisms of aircraft vortex sound generation are examined on the basis of discrete vortex dynamic models and characteristic acoustic signatures calculated by application of vortex sound theory. It is shown that the most robust mechanisms result in very low frequency infrasound. An instability of the vortex core structure is discussed and shown to be a possible mechanism for generating higher frequency sound bordering the audible frequency range. However, the frequencies produced are still low and cannot explain the reasonably high-pitched sound that has occasionally been observed experimentally. Since the robust mechanisms appear to generate only very low frequency sound, infrasonic tracking of the vortices may be warranted.

Hardin, Jay C.↗

NASA NTRS2003

A Novel Method of High Accuracy, Wavefront Phase and Amplitude Correction for Coronagraphy

Detection of extra-solar, and especially terrestrial-like planets, using coronagraphy requires an extremely high level of wavefront correction. For example, the study of Woodruff et al. (2002) has shown that phase uniformity of order 10(exp -4)lambda(rms) must be achieved over the critical range of spatial frequencies to produce the approx. 10(exp 10) contrast needed for the Terrestrial Planet Finder (TPF) mission. Correction of wavefront phase errors to this level may be accomplished by using a very high precision deformable mirror (DM). However, not only phase but also amplitude uniformity of the same scale (10(exp -4)) and over the same spatial frequency range must be simultaneously obtained to remove all residual speckle in the image plane. We present a design for producing simultaneous wavefront phase and amplitude uniformity to high levels from an input wavefront of modest quality. The design uses a dual Michelson interferometer arrangement incorporating two DMs and a single, fixed mirror (all at pupils) and two beamsplitters: one with unequal (asymmetric) beam splitting and one with symmetric beam splitting. This design allows high precision correction of both phase and amplitude using DMs with relatively coarse steps, is substantially achromatic and permits a simple correction algorithm.

Bowers, Charles W.↗