SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We demonstrate the new concept of using unit cell volume coefficient of variation to approximate the enthalpic penalty of high-entropy alloy (HEA) candidates, and use it along with configurational entropy to map promising HEA halide perovskites.
Developing metal halide perovskite (MHP) photovoltaic (PV) devices into reliable large-area solar modules could accelerate global solar energy deployment. Many MHP devices are susceptible to degradation under light and elevated temperature (LT). Published research on LT testing is limited at the module level, and LT testing has not yet been developed for qualification testing of commercial PV products. This report assesses whether results of LT testing at moderately elevated temperatures correlate with those of field-tested modules from the same batch. Six batches of samples from four manufacturers are assessed. It is shown that modules with a robust package that can maintain over 80% of their peak efficiency during LT testing at 55 °C for 100 h are more likely to retain over 80% of their peak efficiency during outdoor operation for 10 weeks. This finding is a step towards developing a validated test protocol that could be incorporated into a qualification standard for the commercialization of MHP PV technologies.
This final report summarizes our achievements under the project DE-SC0021158. Briefly, this project allowed us to synthesize using solution chemistry methods and study multinary metal halides. Furthermore, we showed that optical spectroscopy methods in combination with Small Angle X-ray Scattering (SAXS) and Electrospray Ionization Mass Spectrometry (ESI-MS) can be used to discover brand new optical and electronic materials in .
Anomalous thermoluminescent kinetics of irradiated alkali halides
Absorption spectrum of alkali halide crystals before and after radiation exposure
Thermopotential measurements of alkali halides
Quantitative detection and washing and pumping methods for removal of traces of water from alkali halides
Photoelectric yields of alkali halides measured, using rare gas ion chamber to determine flux distribution of helium continuum and obtain absorption coefficients
Ultrasonic attenuation of alkali halide crystals in 120 to 180 degrees K range, noting thermal annealing of dislocation pinning centers
Single crystal film structure of fcc metals evaporated in ultrahigh vacuum onto alkali halide surfaces cleaved in air and in situ
Three undercoordinated iridium chloride anions, IrCl n − (n = 3–5), and their neutral counterparts were investigated by cryogenic anion photoelectron spectroscopy and theoretical calculations. Photodetachment of IrCl n − leads to the formation of the corresponding neutral complex, i.e., a triplet ground state for n = 3, a quartet for n = 4, and close-lying singlet and triplet for n = 5. The vertical detachment energies are determined to be 3.89, 4.98, and 5.14 eV for n = 3, 4, and 5, respectively, revealing superhalogen anion properties with increasing electron detachment energies as chloride ligands added. The IrCl 3 − spectrum features an extremely broad, lowest electron binding energy band, attributed to resonant autodetachment with prominent non-Franck–Condon profiles. In IrCl 5 − , detachment prompts a d-orbital rearrangement that drives a structural transformation from a twisted square-based pyramidal to a trigonal–bipyramidal geometry in the singlet state. In conclusion, these findings provide insights into the electronic and structural adaptability of iridium halides, advancing our understanding of ligand exchange reactions and dissociative stability in transition metal complexes.
Abstract Metal halide perovskites based on formamidinium (FA), or FA‐rich compositions have shown great promise for high‐performance photovoltaics. A deeper understanding of the impact of ambient conditions (e.g., moisture, oxygen, and illumination) on the possible reactions of FA‐based perovskite films and their processing sensitivities has become critical for further advances toward commercialization. Herein, we investigate reactions that take place on the surface of the FA 0.7 Cs 0.3 , mixed Br/I wide bandgap perovskite thin films in the presence of humid air and ambient illumination. The treatment forms a surface layer containing O, OH, and N‐based anions. We propose the latter originates from formamidine trapped at the perovskite/oxide interface reacting further to cyanide and/or formamidinate—an understudied class of pseudohalides that bind to Pb. Optimized treatment conditions improve photoluminescence quantum yield owing to both reduced surface recombination velocity and increased bulk carrier lifetime. The corresponding perovskite solar cells also exhibit improved performance. Identifying these reactions opens possibilities for better utilizing cyanide and amidinate ligands, species that may be expected during vapor processing of FA‐based perovskites. Our work also provides new insights into the self‐healing or self‐passivating of MA‐free perovskite compositions where FA and iodide damage could be partially offset by advantageous reaction byproducts. image
This study investigates how sustained low Earth orbit (LEO) exposure affects metal halide perovskite (MHP) thin films and perovskite solar cells (PSCs). It examines samples deployed on the Materials International Space Station Experiment (MISSE) 15 and 16 missions. Five methylammonium lead iodide (MAPI) thin films are deployed on MISSE-16, each with distinct UV filters to selectively attenuate AM0 spectral bands. While post-flight optical analysis reveals that the least UV-exposed film exhibits the highest emission and lowest non-radiative recombination rate, no clear correlation is observed among the rest, and all MAPI films maintained excellent integrity throughout the mission. MISSE-15 deployed eight PSCs with diverse structures, MHP compositions, and contact materials. Post-flight analysis reveals stable, highly emissive MHPs, but damaged contacts due to ion migration, which caused loss of electrical response. The MISSE missions demonstrate MHPs' suitability for space applications, while highlighting the need for improved interfacial layers and contact materials to enhance charge carrier mobility, prevent ion migration, and improve charge carrier extraction efficiency.
Sulfide-based solid-state batteries (SSBs) show promise in achieving energy densities over 350 Wh/kg, yet challenges persist with their incorporation of high-voltage, nickel-rich layered oxide cathodes, such as LiNi₀.₈Mn₀.₁Co₀.₁O₂ (NMC811), due to the poor oxidation stability of sulfide solid-state electrolytes (SSEs) like Li₆PS₅Cl (LPSCl). Although halide SSEs such as Li₃InCl₆ (LIC) and Li₃YCl₆ (LYC) have previously shown promise in stabilizing high-voltage NMC cathodes, our research reveals that sulfide SSE catholytes, particularly when combined with surface-coated NMC cathodes, deliver superior performance. Here, this investigation assesses the cycling stability of various catholytes—LPSCl, LIC, Li₁₀GeP₂S₁₂ (LGPS), combined LIC-LPSCl, and LYC-LPSCl—in SSBs with LiNbO₃-coated NMC811 cathodes against sheet-type LPSCl separators. Findings indicate that while LGPS-based cathodes maintain higher capacity retention, they yield lower deliverable capacity, and LIC cathodes experience significant electrochemical degradation. Importantly, our results underscore that sulfide SSE catholytes, in conjunction with LiNbO₃-coated cathodes, optimize the cathode-electrolyte interphase (CEI), enhancing both kinetics and mass transport. These insights provide a strategic direction for optimizing catholyte composition in the development of sheet-type sulfide-based SSBs.
Gradual reverse-bias breakdown in metal-halide perovskite diodes and solar cells is thought to originate from hole tunneling through steep bands in an ionic depletion region near the electron-transport layer after positively charged iodine vacancies accumulate near the hole-transport layer (HTL). However, typical reported mobile-ion concentrations near 1 x 10^17 cm-3 are too small to quantitatively explain significant tunneling-current densities and (Zener) breakdown observed near -5 V. Here, we show that inferred mobile-ion concentrations increase by more than 100x, to over 1 x 10^18cm-3 , within just 3 min of reverse bias at -6.0 V in p-i-n perovskite diodes. We attribute this increase to iodide oxidation and coupled iodine vacancy creation that must be balanced by reduction reactions near the HTL. Sub-optimal HTL coverage leads to direct contact between the transparent conducting electrode and perovskite, facilitates reduction events, enables the creation of even larger inferred mobile-ion concentrations (~1 x 10^19cm-3 ), and leads to faster degradation under reverse bias. This explains previous work that showed increased breakdown voltages and improved reverse-bias stability by implementing thick, uniform HTLs.
Hybrid organic–inorganic perovskites are a rapidly developing class of materials due to their desirable properties for optoelectronic applications such as their ease of synthesis, solution-processable film formation, tunable band gap, strong photoluminescence, good charge carrier mobilities, and high defect tolerance. Here, we present a novel 2D perovskite motif that seamlessly integrates the structural elements from both Ruddlesden–Popper and Dion–Jacobson halide perovskites. We demonstrate the incorporation of two different organic spacer cations in an ordered manner in 5 novel 2D perovskite iodide materials. Both a cyclic diammonium cation 3-(aminomethyl)piperidinium (3AMP) and a linear alkyl monoammonium cation (Cn = C n H 2n+4 N, n = 4–8) are present in distinct alternating layers, making the new series (Cn) 2 (3AMP)[PbI 4 ] 2 . The crystallization of these materials was optimized through careful temperature control to obtain precise crystal structures via single-crystal X-ray diffraction (XRD) which confirmed the presence of the two cations in distinct layers. The influence of the two spacers on optical properties including the band gaps and photoluminescence spectra are found to more closely resemble (3AMP)PbI 4 than (Cn) 2 PbI 4 , which can be attributed to the amount of distortion imposed by the 3AMP spacer on the lead iodide layers. The findings are supported by density functional theory calculations. The strong photoelectric response of solution-processed thin films shows the potential of these materials in photodetectors or photovoltaics. This unprecedented amalgamation of RP–DJ in (Cn) 2 (3AMP)[PbI 4 ] 2 in a structurally ordered fashion suggests a potential vastly underexplored phase space of 2D perovskites in which there are chemically different spacers in distinct layers of the structure, providing an additional parameter to tune perovskite properties.
Halide perovskites are crucial materials with broad applications owing to their exceptional optoelectronic properties. Vacancy-ordered double perovskites, featuring highly tunable transition metal sites, enable controllable optoelectronic properties through multielement compositional design. Here, in this study, we introduced 18-crown-6 into the vacancy-ordered double perovskites system and developed two-dimensional ribbon-like single crystals (18C6@K) 2 {PtSnTeIrRe} 1 Cl 6 via an antisolvent supramolecular assembly method, demonstrating morphology modulation through multielement composition design. The crystals crystallize in the centrosymmetric space group $P\bar{1}$. The dumbbell-shaped structural units (crown ether@A)2MX6 pack along a and b axes to form a 2-dimensional (2D) monolayer, and these monolayers further stack along the c axis to generate the ribbon-like single crystals. Energy-dispersive X-ray spectroscopy (EDX) qualitatively confirmed the uniform distribution of the five transition metals throughout the crystal, while inductively coupled plasma atomic emission spectroscopy (ICP–AES) quantitatively verified their atomic ratios. We further investigated the origin of the morphology, distinct from the previously reported cube-like single crystals with the $R\bar{3}$ space group. When acetonitrile was used as the solvent, three-dimensional crystals with $R\bar{3}$ symmetry were obtained, whereas dimethylformamide (DMF) was essential for forming two-dimensional ribbon-like single crystals. The essential role of DMF could be ascribed to its capability to maintain a higher concentration of the building blocks. Moreover, Ir 4+ and Pt 4+ cations also played critical roles in inducing the two-dimensional ribbon-like morphology. The three-element (18C6@K) 2 {PtSnTe}1Cl 6 single crystals exhibited bright yellow emission under 375 nm laser excitation, demonstrating the tunability of optoelectronic properties of this class of material.
By systematically optimizing solid-state synthesis via the concerted use of differential scanning calorimetry and in-situ variable-temperature X-ray diffraction, we report the discovery of four new hybrid organic-inorganic manganese halides A2Mn(Cl/Br)4 (A = NH4+, C(NH2)3+, C3H4N2+), with emphasis on how the organic fragment geometry, polarity, and electron-donating properties influence crystallographic spatial disorders, thermal behaviors, and optical band gaps. With a nonpolar tetrahedral cation, as in (NH4)2MnCl4 (P21/c, mP30) or (NH4)2MnBr4 (C2/c, mC180), the direct optical bandgaps (4.36–4.28 eV) are wider than those with an organic nonpolar planar geometry, as in (C(NH2)3)2MnBr4 (P21/c, mP300, 4.07 eV), or an organic polar planar geometry, as in (C3H4N2+)2MnBr4 (I41/a, tI384, 4.05 eV). Furthermore, the organic components affect the spatial arrangement and dimensionality of the resulting inorganic frameworks comprised of Mn(Cl/Br)6 octahedra, with varying distortions, or spatially disordered MnBr4 tetrahedra. These resulting trends, coupled with the systematic investigation into synthesis, and the motivation behind elucidating the nuanced role of the organic cation, altogether expand upon the phase-space of hybrid materials beyond perovskites and demonstrate the potential for a rational design of hybrid materials with tailored optoelectronic functionalities for advanced energy applications.