Search NASA⌕ Search

SEARCH · Search NASA

Results for “hard constraint”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

X-RAY SPECTRAL ANALYSIS OF THE STEADY STATES OF GRS1915+105

We report on the X-ray spectral behavior within the steady states of GRS1915+105. Our work is based on the full data set of the source obtained using the Proportional Counter Array (PCA) on the Rossi X-ray Timing Explorer (RXTE) and 15 GHz radio data obtained using the Ryle Telescope. The steady observations within the X-ray data set naturally separated into two regions in the color–color diagram and we refer to these regions as steady-soft and steady-hard. GRS1915+105 displays significant curvature in the coronal component in both the soft and hard data within the RXTE/PCA bandpass. A majority of the steady-soft observations displays a roughly constant inner disk radius (R{sub in}), while the steady-hard observations display an evolving disk truncation which is correlated to the mass accretion rate through the disk. The disk flux and coronal flux are strongly correlated in steady-hard observations and very weakly correlated in the steady-soft observations. Within the steady-hard observations, we observe two particular circumstances when there are correlations between the coronal X-ray flux and the radio flux with log slopes η∼0.68±0.35 and η∼1.12±0.13. They are consistent with the upper and lower tracks of Gallo et al. (2012), respectively. A comparison of the model parameters to the state definitions shows that almost all of the steady-soft observations match the criteria of either a thermal or steep power-law state, while a large portion of the steady-hard observations match the hard-state criteria when the disk fraction constraint is neglected.

79 ASTRONOMY AND ASTROPHYSICS↗

The association of solar millisecond radio spikes with hard X-ray emission

Conventional observational data regarding solar millisecond spikes are compared with data gathered simultaneously in the hard X-ray band by means of a statistical analysis. The analysis considers the association rate, correlation degree, and relative time delays between hard X-ray emissions (in the 25-438 keV range) and radio-spike events. About 95 percent of the radio-spike bursts occur during impulsive hard X-ray bursts, and approximately 43 percent of the compared events are characterized by hard X-ray time profiles that mimic the concentration of simultaneous radio spikes. The delay of the radio emission with respect to the hard X-ray bursts puts some constraints on the acceleration and propagation of particles. The time delays and the quantization into discrete radio events are theorized to be caused by the operation of the accelerator.

Guedel, M.↗

EC 19314 - 5915 - A bright, eclipsing cataclysmic variable from the Edinburgh-Cape Blue Object Survey

A deeply eclipsing cataclysmic variable, with an orbital period of 4.75 hr, has been discovered in the southern Edinburgh-Cape Blue Object Survey. The star, EC 19314 - 5915, lies close to the positional constraints of a previously unidentified HEAO-1 hard X-ray source, 1H1930 - 5989. Its optical spectrum is unusual in that it shows, apart from the emission lines characteristic of a novalike, or dwarf nova cataclysmic variable (Balmer, He I and He II), metallic absorption lines typical of a late-G star. The individual time-resolved spectra, with the tertiary absorption lines removed, show absorption reversals in the Balmer emission lines, increasing in strength for the higher series. The Balmer emission radial velocities are therefore severely distorted in comparison to the He II 4686-A emission and He I 4471-A absorption radial velocity curves. An independent distance estimate of about 600 pc is derived for EC19314 - 5915, from the spectroscopic parallax of the third star.

Buckley, D. A. H.↗

Comparison of theoretically predicted and observed Solar Maximum Mission X-ray spectra for the 1980 April 13 and May 9 flares

A method for predicting the hard X-ray spectrum in the 10-100 keV range for compact flares during their initial rise is developed on the basis of a thermal model. Observations of the flares of 1980 April 13, 4:05 U.T., and 1980 May 9, 7:12 U.T. are given and their combined spectra from the Hard X-ray Burst Spectrometer and Hard X-ray Imaging Spectrometer on the Solar Maximum Mission are deduced. Constraints on the cross sectional area of the supposed emitting arch are obtained from data from the Hard X-ray Imaging Spectrometer. A power-law spectrum is predicted for the rise of the flare of April 13 for initial arch densities less than 10 to the 10th per cu cm and also for the flare of May 9 for initial arch densities less than 5.4 x 10 to the 10th per cu cm. In both cases power-law spectra are observed. Limitations and implications of these results are discussed.

Smith, D. F.↗

FADING HARD X-RAY EMISSION FROM THE GALACTIC CENTER MOLECULAR CLOUD Sgr B2

The center of our Galaxy harbors a four million solar mass black hole that is unusually quiet: its present X-ray luminosity is more than 10 orders of magnitude less than its Eddington luminosity. The observation of iron fluorescence and hard X-ray emission from some of the massive molecular clouds surrounding the Galactic center has been interpreted as an echo of a past 10{sup 39} erg s{sup -1} flare. Alternatively, low-energy cosmic rays propagating inside the clouds might account for the observed emission, through inverse bremsstrahlung of low-energy ions or bremsstrahlung emission of low-energy electrons. Here, we report the observation of a clear decay of the hard X-ray emission from the molecular cloud Sgr B2 during the past seven years, thanks to more than 20 Ms of INTEGRAL exposure. This confirms the decay previously observed comparing the 6.4 keV line fluxes measured by various X-ray instruments, but without intercalibration effects. The measured decay time is 8.2 {+-} 1.7 yr, compatible with the light crossing time of the molecular cloud core. Such a short timescale rules out inverse bremsstrahlung by cosmic-ray ions as the origin of the X ray emission. We also obtained 2-100 keV broadband X-ray spectra by combining INTEGRAL and XMM-Newton data and compared them with detailed models of X-ray emission due to irradiation of molecular gas by (1) low-energy cosmic-ray electrons and (2) hard X-rays. Both models can reproduce the data equally well, but the time variability constraints and the huge cosmic-ray electron luminosity required to explain the observed hard X-ray emission strongly favor the scenario in which the diffuse emission of Sgr B2 is scattered and reprocessed radiation emitted in the past by Sgr A*. The spectral index of the illuminating power-law source is found to be {Gamma} {approx} 2 and its luminosity 1.5-5 x 10{sup 39} erg s {sup -1}, depending on the relative positions of Sgr B2 and Sgr A*. Using recent parallax measurements that place Sgr B2 in front of Sgr A*, we find that the period of intense activity of Sgr A* ended between 75 and 155 years ago.

79 ASTRONOMY AND ASTROPHYSICS↗

The pulsar contribution to galactic cosmic ray positrons

Measurements of high energy positrons in the cosmic rays appear to show an increase in the positron fraction above 10 GeV which is inconsistent with theoretical predictions of secondary positron production. We explore the possibility that observations of .1 - 1 GeV and very high energy (VHE) gamma-rays from the Crab and Vela pulsars could imply a significant primary positron contribution from galactic radio pulsars at energies above 10 GeV. Assuming that positrons are produced through magnetic pair creation in the cascades near the polar cap which may be the source of the observed gamma rays, we can estimate the flux and spectrum of the pulsar positron contribution. The pulsar positron component has a flatter spectrum than that expected from secondary cosmic ray production. The level of this contribution above 10 GeV is high enough to make pulsars viable sources of the high energy positron excess, and may also put interesting constraints on pulsar emission models.

Harding, Alice K.↗

Possibility of splitting APS dipoles to make more ID straights.

Recently we were asked by Ercan Alp if it would be possible to use three dipoles in an APS sector to make a second ID beamline possible, much as was done for the APSx3 design. We've looked at this to see what might be possible without making too many changes to the ring. Ideally, we'd like to simply replace the one dipole with two shorter dipoles with an insertion device in the middle. Of course, we'd like to make the ID as long as possible, subject to limits on dipole strength, accelerator optics, and emittance. We used elegant [3] to match an insertion device consisting of two sectors. The second (BM) dipole of the first sector was split at the 1/8th point in terms of both angle and length. A zero length drift space was inserted that could then be stretched to create room for an ID. To simplify matters somewhat at this stage, we constrained the length of the two dipoles plus the drift to equal the original dipole length. I.e., we ignored for now the difference between arc and straight length. Our desire is to make the drift space as long as possible. If we limit the dipole field B to 2T, then the total length of the dipoles must be greater than L{sub min} = H{theta}/B, where H = 23.35Tm is the rigidity and {theta} = {pi}/40-0.001 is the total angle. L{sub min} is therefore 0.91 m, and hence the drift space can at most be 2.15 m. At least one, perhaps both, of the short dipoles will end up in a high-dispersion region, which will lead to emittance growth. Hence, we didn't want to drive the length too far and decided to limit it to 2 m, approximately the same as in the APSx3 lattice. Hence, as in that lattice we should be able to accommodate a 1-m-long insertion device. In addition to stretching the drift space, we allowed all twenty quadrupoles in the sectors to vary. Initial constraints included less than 20% deviation in lattice functions at the middle ID straight and less than 0.001% deviation in the final ID straight (to get a good match to the rest of the ring). We found the dispersion slope at the middle ID was quite hard to match, and made this a relatively loose constraint. We also had to increase the tolerance on changes in the horizontal beta function at the middle ID from 20 to 30%. A constraint was also placed on the effective emittance to make it as small as possible. Figure 1 shows the lattice functions for the two sectors. The magnet-to-magnet distance between the split dipoles is 1.97 m, slightly short of the 2 m mark. The first dipole is 0.17 m long with a field of 1.35 T, while the second dipole is 0.92 m long with a field of 1.73 T. The effective emittance assuming we formed a ring from such sectors is 4.95 nm. Hence, if we add N such modules to a ring with all other sectors being normal (3.13 nm effective emittance), the expected emittance is 9.9N + (40-2N)3.13/40 (1). If we want to limit the emittance to 10% more than the nominal 3.13 nm, we need N < 4. If we limit it to under 4 nm (ESRF's emittance), then we have N < 10. Table 1 lists parameters of the new source point, assuming that we insert three such modules in the ring (N = 3) and that we have a 1.5% ratio of the raw emittances. We attempted to improve the emittance and matching by allowing a gradient in the dipoles, thinking that perhaps it would provide additional optics flexibility. However, no improvement was obtained.

43 PARTICLE ACCELERATORS↗

Evaluation of Open-Source Hard Real Time Software Packages

Reliable software is, at times, hard to find. No piece of software can be guaranteed to work in every situation that may arise during its use here at Glenn Research Center or in space. The job of the Software Assurance (SA) group in the Risk Management Office is to rigorously test the software in an effort to ensure it matches the contract specifications. In some cases the SA team also researches new alternatives for selected software packages. This testing and research is an integral part of the department of Safety and Mission Assurance. Real Time operation in reference to a computer system is a particular style of handing the timing and manner with which inputs and outputs are handled. A real time system executes these commands and appropriate processing within a defined timing constraint. Within this definition there are two other classifications of real time systems: hard and soft. A soft real time system is one in which if the particular timing constraints are not rigidly met there will be no critical results. On the other hand, a hard real time system is one in which if the timing constraints are not met the results could be catastrophic. An example of a soft real time system is a DVD decoder. If the particular piece of data from the input is not decoded and displayed to the screen at exactly the correct moment nothing critical will become of it, the user may not even notice it. However, a hard real time system is needed to control the timing of fuel injections or steering on the Space Shuttle; a delay of even a fraction of a second could be catastrophic in such a complex system. The current real time system employed by most NASA projects is Wind River's VxWorks operating system. This is a proprietary operating system that can be configured to work with many of NASA s needs and it provides very accurate and reliable hard real time performance. The down side is that since it is a proprietary operating system it is also costly to implement. The prospect of replacing this somewhat costly implementation is the focus of one of the SA group s current research projects. The explosion of open source software in the last ten years has led to the development of a multitude of software solutions which were once only produced by major corporations. The benefits of these open projects include faster release and bug patching cycles as well as inexpensive if not free software solutions. The main packages for hard real time solutions under Linux are Real Time Application Interface (RTAI) and two varieties of Real Time Linux (RTL), RTLFree and RTLPro. During my time here at NASA I have been testing various hard real time solutions operating as layers on the Linux Operating System. All testing is being run on an Intel SBC 2590 which is a common embedded hardware platform. The test plan was provided to me by the Software Assurance group at the start of my internship and my job has been to test the systems by developing and executing the test cases on the hardware. These tests are constructed so that the Software Assurance group can get hard test data for a comparison between the open source and proprietary implementations of hard real time solutions.

Mattei, Nicholas S.↗

Microstructural Characterization and High Strain Rate Plastic Flow Behavior of SMAW Armox500T Steel Joints from Spherical Indentation Experiments

Static indentation and uniaxial compression tests have been conducted on Armox500T steel and its weldments to predict the constraint factor (CF), i.e., ratio of Meyer’s hardness to uniaxial flow stress. Series of dynamic indentation experiments were carried out at impact velocities ranging from 5 to 300 m/s to estimate dynamic hardness as a function of average strain. Subsequently, dynamic indentation (DI) test data and CF determined under static indentation conditions have been used to study the high strain rate plastic flow behavior of Armox500T weldments in comparison with the base metal. It was observed that flow stress for Armox500T and its weldments under dynamic loading conditions (10{sup 4} s{sup −1}) are significantly higher than flow stress measured under static loading conditions (10{sup −3} s{sup −1}). The plastic flow behavior computed from DI is in good agreement with the data evaluated through conventional split Hopkinson pressure bar technique. Further, the study of the microstructure of base metal and weldments by optical microscopy and SEM revealed a considerable variation in the microstructure.

36 MATERIALS SCIENCE↗

The soft-wall standard model

We explore the possibility of modeling electroweak physics in a warped extra dimension with a soft wall. The infrared boundary is replaced with a smoothly varying dilaton field that provides a dynamical spacetime cutoff. We analyze gravity, gauge fields, and fermions in the soft-wall background and obtain a discrete spectrum of Kaluza-Klein states which can exhibit linear Regge-like behavior. Bulk Yukawa interactions give rise to nonconstant fermion mass terms, leading to fermion localization in the soft-wall background and a possible explanation of the standard model flavor structure. Furthermore we construct electroweak models with custodial symmetry, where the gauge symmetry is broken with a bulk Higgs condensate. The electroweak constraints are not as stringent as in hard-wall models, allowing Kaluza-Klein masses of order the TeV scale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Bilevel Approach for Identifying the Worst Contingencies for Nonconvex Alternating Current Power Systems

We address the bilevel optimization problem of identifying the most critical attacks to an alternating current (AC) power flow network. The upper-level binary maximization problem consists of choosing an attack that is treated as a parameter in the lower-level defender minimization problem. Instances of the lower-level global minimization problem by themselves are NP-hard due to the nonconvex AC power flow constraints, and bilevel solution approaches commonly apply a convex relaxation or approximation to allow for tractable bilevel reformulations at the cost of underestimating some power system vulnerabilities. Our main contribution is to provide an alternative branch-and-bound algorithm whose upper bounding mechanism (in a maximization context) is based on a reformulation that avoids relaxation of the AC power flow constraints in the lower-level defender problem. Lower bounding is provided with semidefinite programming (SDP) relaxed solutions to the lower-level problem. We establish finite termination with guarantees of either a globally optimal solution to the original bilevel problem, or a globally optimal solution to the SDP-relaxed bilevel problem which is included in a vetted list of upper-level attack solutions, at least one of which is a globally optimal solution to the bilevel problem. We demonstrate through computational experiments applied to IEEE case instances both the relevance of our contribution, and the effectiveness of our contributed algorithm for identifying power system vulnerabilities without resorting to convex relaxations of the lower-level problem. We conclude with a discussion of future extensions and improvements.

97 MATHEMATICS AND COMPUTING↗

A Scheduling Algorithm for Replicated Real-Time Tasks

We present an algorithm for scheduling real-time periodic tasks on a multiprocessor system under fault-tolerant requirement. Our approach incorporates both the redundancy and masking technique and the imprecise computation model. Since the tasks in hard real-time systems have stringent timing constraints, the redundancy and masking technique are more appropriate than the rollback techniques which usually require extra time for error recovery. The imprecise computation model provides flexible functionality by trading off the quality of the result produced by a task with the amount of processing time required to produce it. It therefore permits the performance of a real-time system to degrade gracefully. We evaluate the algorithm by stochastic analysis and Monte Carlo simulations. The results show that the algorithm is resilient under hardware failures.

Yu, Albert C.↗

Sub-second variations of high energy ( 300 keV) hard X-ray emission from solar flares

Subsecond variations of hard X-ray emission from solar flares were first observed with a balloon-borne detector. With the launch of the Solar Maximum Mission (SMM), it is now well known that subsecond variations of hard X-ray emission occur quite frequently. Such rapid variations give constraints on the modeling of electron energization. Such rapid variations reported until now, however, were observed at relatively low energies. Fast mode data obtained by the Hard X-ray Burst Spectrometer (HXRBS) has time resolution of approximately 1 ms but has no energy resolution. Therefore, rapid fluctuations observed in the fast-mode HXRBS data are dominated by the low energy hard X-rays. It is of interest to know whether rapid fluctuations are observed in high-energy X-rays. The highest energy band at which subsecond variations were observed is 223 to 1057 keV. Subsecond variations observed with HXRBS at energies greater than 300 keV are reported, and the implications discussed.

Bai, Taeil↗

The packing problem of uncertain multicasts

Summary Multicast performs better than unicast in delivering the same content from a fixed single source to a set of destinations. Many efforts have been made to optimize such kind of deterministic multicast, such as minimizing the transmission cost of each multicast session. In practice, it is not necessary that the source of each multicast session has to be in a specific location, as long as certain constraints are satisfied. Accordingly, applications usually meet a novel multicast with uncertain sources, ie, uncertain multicast. That is, multiple nodes have the responsibility to act as the root node of a multicast session. Prior proposals have addressed an uncertain multicast by constructing the minimum cost forest. However, it is still unknown how to efficiently share the network resources, when a set of uncertain multicast occupies the network simultaneously. To tackle such a challenging issue, we present the packing problem of uncertain multicasts (MPU) to minimize the total transmission cost, under the constraint of link capacity. We prove that the MPU problem is NP‐hard. An intrinsic solution is constructing the minimum cost forest for each uncertain multicast individually. This method, however, is inefficient and may be infeasible because of the constraint of link capacity. Thus, we design 2 dedicated greedy methods, named priority‐based and adjusting congested link, to approximate the optimal solution. The comprehensive results indicate that both of our 2 methods can find a feasible solution for the MPU problem. Moreover, given a set of uncertain multicasts, the adjusting congested link method can generate a desired transmission structure for each uncertain multicast and achieve the least total cost when packing them.

Ren, Bangbang↗

Viterbi decoding for satellite and space communication.

Convolutional coding and Viterbi decoding, along with binary phase-shift keyed modulation, is presented as an efficient system for reliable communication on power limited satellite and space channels. Performance results, obtained theoretically and through computer simulation, are given for optimum short constraint length codes for a range of code constraint lengths and code rates. System efficiency is compared for hard receiver quantization and 4 and 8 level soft quantization. The effects on performance of varying of certain parameters relevant to decoder complexity and cost are examined. Quantitative performance degradation due to imperfect carrier phase coherence is evaluated and compared to that of an uncoded system. As an example of decoder performance versus complexity, a recently implemented 2-Mbit/sec constraint length 7 Viterbi decoder is discussed. Finally a comparison is made between Viterbi and sequential decoding in terms of suitability to various system requirements.

Heller, J. A.↗

Avionics for a Small Robotic Inspection Spacecraft

A report describes the tentative design of the avionics of the Mini-AERCam -- a proposed 7.5-in. (approximately 19-cm)-diameter spacecraft that would contain three digital video cameras to be used in visual inspection of the exterior of a larger spacecraft (a space shuttle or the International Space Station). The Mini-AERCam would maneuver by use of its own miniature thrusters under radio control by astronauts inside the larger spacecraft. The design of the Mini-AERCam avionics is subject to a number of constraints, most of which can be summarized as severely competing requirements to maximize radiation hardness and maneuvering, image-acquisition, and data-communication capabilities while minimizing cost, size, and power consumption. The report discusses the design constraints, the engineering approach to satisfying the constraints, and the resulting iterations of the design. The report places special emphasis on the design of a flight computer that would (1) acquire position and orientation data from a Global Positioning System receiver and a microelectromechanical gyroscope, respectively; (2) perform all flight-control (including thruster-control) computations in real time; and (3) control video, tracking, power, and illumination systems.

Abbott, Larry↗

Short-lived solar burst spectral component at f approximately 100 GHz

A new kind of burst emission component was discovered, exhibiting fast and distinct pulses (approx. 60 ms durations), with spectral peak emission at f approx. 100 GHz, and onset time coincident to hard X-rays to within approx. 128 ms. These features pose serious constraints for the interpretation using current models. One suggestion assumes the f approx. 100 GHz pulses emission by synchrotron mechanism of electrons accelerated to ultrarelativistic energies. The hard X-rays originate from inverse Compton scattering of the electrons on the synchrotron photons. Several crucial observational tests are needed for the understanding of the phenomenon, requiring high sensitivity and high time resolution (approx. 1 ms) simultaneous to high spatial resolution (0.1 arcsec) at f approx. 110 GHz and hard X-rays.

Kaufmann, P.↗

Noninvasive Synchrotron-Based X-ray Raman Scattering Discriminates Carbonaceous Compounds in Ancient and Historical Materials [ In situ synchrotron-based X-Ray Raman scattering discriminates carbonaceous compounds in ancient and historical materials]

Carbon compounds are ubiquitous and occur in a diversity of chemical forms in many systems including ancient and historic materials ranging from cultural heritage to paleontology. Determining their speciation cannot only provide unique information on their origin but may also elucidate degradation processes. Synchrotron-based X-ray absorption near-edge structure (XANES) spectroscopy at the carbon K-edge (280–350 eV) is a very powerful method to probe carbon speciation. However, the short penetration depth of soft X-rays imposes stringent constraints on sample type, preparation, and analytical environment. A hard X-ray probe such as X-ray Raman scattering (XRS) can overcome many of these difficulties. Here we report the use of XRS at ~6 keV incident energy to collect carbon K-edge XANES data and probe the speciation of organic carbon in several specimens relevant to cultural heritage and natural history. This methodology enables the measurement to be done in a nondestructive way, in air, and provides information that is not compromised by surface contamination by ensuring that the dominant signal contribution is from the bulk of the probed material. Using the backscattering geometry at large photon momentum transfer maximizes the XRS signal at the given X-ray energy and enhances nondipole contributions compared to conventional XANES, thereby augmenting the speciation sensitivity. The capabilities and limitations of the technique are discussed. As a result, we show that despite its small cross section, for a range of systems the XRS method can provide satisfactory signals at realistic experimental conditions. XRS constitutes a powerful complement to FT-IR, Raman, and conventional XANES spectroscopy, overcoming some of the limitations of these techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗