Search NASA⌕ Search

SEARCH · Search NASA

Results for “hard technologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Utilizing Gaps and Performance Measures to Inform NASA Environmental Control and Life Support Systems and Human Health and Performance Capability Technology Decisions

Human spaceflight is a complex endeavor requiring multiple capabilities for transportation, crew health, scientific goals, and safe return to Earth. The difference between spaceflight proven capabilities and those needed for future exploration architectures is defined as a capability gap. Capability gaps are not technology specific. Each capability gap may be closed with a wide array of technologies that have unique benefits and challenges. Determining what a capability’s relevant and distinguishing key performance parameters (KPPs) are for a mission is critical. Mass, power, and volume are always constrained and important, but defining these in a way normalized by performance is very important. KPP definition for reliability, dormancy, and integration needs are hard to define but critical. Outside of technical considerations, the programmatic factors of the estimated time to develop the technology and how the technology validation objectives are matured are strong considerations in which technologies should be pursued and how they should leverage earlier mission elements. The Environmental Control and Life Support (ECLSS) and Crew Health and Performance (CHP) capability areas are decomposed to high level gaps. While KPPs should be technology agnostic, they can be used to both compare technologies and measure progress of technology development over time. KPPs help define when the gap is closed, and the core mission objectives can be accomplished. Proposed technology improvements to enhance a capability should balance improved KPPs and against investments in other capabilities that are not yet closed. A selection of gaps, KPPs, and validation objectives and their formulation, current state, and how they inform capability roadmap planning are discussed.

Life Support↗
NASA NTRSDate not supplied

Utilizing Gaps and Performance Measures to Inform NASA Environmental Control and Life Support Systems and Crew Health and Performance Technology Decisions

Human spaceflight is a complex endeavor requiring multiple capabilities for transportation, crew health, scientific goals, and safe return to Earth. The difference between spaceflight proven capabilities and those needed for future exploration architectures is defined as a capability gap. Capability gaps are not technology specific. Each capability gap may be closed with a wide array of technologies that have unique benefits and challenges. Determining what a capability’s relevant and distinguishing key performance parameters (KPPs) are for a mission is critical. Mass, power, and volume are always constrained and important, but defining these in a way normalized by performance is very important. KPP definition for reliability, dormancy, and integration needs are hard to define but critical. Outside of technical considerations, the programmatic factors of the estimated time to develop the technology and how the technology validation objectives are matured are strong considerations in which technologies should be pursued and how they should leverage earlier mission elements. The Environmental Control and Life Support (ECLSS) and Crew Health and Performance (CHP) capability areas are decomposed to high level gaps. While KPPs should be technology agnostic, they can be used to both compare technologies and measure progress of technology development over time. KPPs help define when the gap is closed, and the core mission objectives can be accomplished. Proposed technology improvements to enhance a capability should balance improved KPPs and against investments in other capabilities that are not yet closed. A selection of gaps, KPPs, and validation objectives and their formulation, current state, and how they inform capability roadmap planning are discussed.

Life Support↗
NASA NTRS2015

Affordable Development and Demonstration of a Small NTR engine and Stage: A Preliminary NASA, DOE, and Industry Assessment

In FY'11, Nuclear Thermal Propulsion (NTP) was identified as a key propulsion option under the Advanced In-Space Propulsion (AISP) component of NASA's Exploration Technology Development and Demonstration (ETDD) program A strategy was outlined by GRC and NASA HQ that included 2 key elements -"Foundational Technology Development" followed by specific "Technology Demonstration" projects. The "Technology Demonstration "element proposed ground technology demonstration (GTD) testing in the early 2020's, followed by a flight technology demonstration (FTD) mission by approx. 2025. In order to reduce development costs, the demonstration projects would focus on developing a small, low thrust (approx. 7.5 -16.5 klb(f)) engine that utilizes a "common" fuel element design scalable to the higher thrust (approx. 25 klb(f)) engines used in NASA's Mars DRA 5.0 study(NASA-SP-2009-566). Besides reducing development costs and allowing utilization of existing, flight proven engine hard-ware (e.g., hydrogen pumps and nozzles), small, lower thrust ground and flight demonstration engines can validate the technology and offer improved capability -increased payloads and decreased transit times -valued for robotic science missions identified in NASA's Decadal Study.

Spacecraft design↗
NASA NTRS2003

Microcalorimeters with Germanium Thermistors for High Resolution Soft and Hard X-ray Astronomy

This is a progress report for the first year of a three year Space Research and Technology (SR&T) grant to continue the advancement of neutron transmutation doped (NTD-based) microcalorimeters. We have re-prioritized certain aspects of the statement of work and chose to emphasize issues of array development in the first year rather than wait until year two. Consequently, some of the projects scheduled for the first year were delayed to the second year. Here we report on our progress to: a) Build and test a 1 x 4 element array and to investigate electrical and thermal cross-talk; b) Build a multiplexed 4 channel analog pulse processor; c) Build a digital pulse processor that can accommodate 4 channels with independent triggers; d) Develop a proportional thermal baseline restoration system compatible with the constant voltage mode of microcalorimeter operation.

Silver, E.↗
NASA NTRS2011

Technology Needs for Gamma Ray Astronomy

Gamma ray astronomy is currently in an exciting period of multiple missions and a wealth of data. Results from INTEGRAL, Fermi, AGILE, Suzaku and Swift are making large contributions to our knowledge of high energy processes in the universe. The advances are due to new detector and imaging technologies. The steps to date have been from scintillators to solid state detectors for sensors and from light buckets to coded aperture masks and pair telescopes for imagers. A key direction for the future is toward focusing telescopes pushing into the hard X-ray regime and Compton telescopes and pair telescopes with fine spatial resolution for medium and high energy gamma rays. These technologies will provide finer imaging of gamma-ray sources. Importantly, they will also enable large steps forward in sensitivity by reducing background.

Gehrels, Neil↗
NASA NTRS2000

A Boundary Scan Test Vehicle for Direct Chip Attach Testing

To facilitate the new faster, better and cheaper spacecraft designs, smaller more mass efficient avionics and instruments are using higher density electronic packaging technologies such as direct chip attach (DCA). For space flight applications, these technologies need to have demonstrated reliability and reasonably well defined fabrication and assembly processes before they will be accepted as baseline designs in new missions. As electronics shrink in size, not only can repair be more difficult, but 49 probing" circuitry can be very risky and it becomes increasingly more difficult to identify the specific source of a problem. To test and monitor these new technologies, the Direct Chip Attach Task, under NASA's Electronic Parts and Packaging Program (NEPP), chose the test methodology of boundary scan testing. The boundary scan methodology was developed for interconnect integrity and functional testing at hard to access electrical nodes. With boundary scan testing, active devices are used and failures can be identified to the specific device and lead. This technology permits the incorporation of "built in test" into almost any circuit and thus gives detailed test access to the highly integrated electronic assemblies. This presentation will describe boundary scan, discuss the development of the boundary scan test vehicle for DCA and current plans for testing of direct chip attach configurations.

Parsons, Heather A.↗
NASA NTRS2009

Irradiation with molecular hydrogen as an accelerated total dose hardness assurance test method for bipolar linear circuits

High dose rate irradiation with hydrogen stress is proposed as an accelerated total dose test method for bipolar linear circuits. The method is validated across process and circuit technologies with five parts that are commonly used in space: a comparator (LM193 from National Semi-conductor), a voltage regulator (HSYE-117 RH from Intersil), a voltage reference (LT1019 from Linear Technology), a JFET input op amp (OP42 from Analog Devices) and a temperature transducer (AD590 from Analog Devices). The testing technique could rapidly establish an upper bound to the low dose rate response of parts in space and help with the part selection process in the design phase of a mission. The technology dependence and the viability of this technique are qualitatively explored using a physical model describing the dose rate response and the effect of hydrogen in bipolar technologies. The model uses four core processes: 1) space charge effects, 2) free electron/hole pair recombination, hole-hydrogen defect reactions in the oxides and 4) proton depassivation of dangling bonds at the Si/SiO2 interface. Radiation hardness assurance implications are discussed.

Pease, Ron↗
NASA NTRS1991

The HL-20 as the personnel launch system

To ensure manned access to space, the Personnel Launch System (PLS) is under consideration by NASA as a complement to the Space Shuttle. Its primary mission will be to transport crew and passengers to and from the Space Station Freedom in low earth orbit (LEO). There are currently two design studies being funded: a biconic, ballistic-shaped vehicle at JSC and a lifting body concept at LaRC. In the late 1950's, both NASA and the Air Force were engaged in the study of lifting bodies for LEO vehicles. Projects included the M2F2 series, the X24 series, and the HL-10. These lifting bodies derive their lift solely from the shape of the fuselage. By the mid-1960's, full scale models were actually built and tested with some success and some failure. Langley's HL-10 was one of the most successful of these projects. However, these studies were temporarily shelved while work progressed on the Space Shuttle. Some of the test results from these studies actually led to concept refinements on certain aspects of the Space Shuttle development. Due to the more recent successes of the Space Shuttle Program and a directive to place a Space Station in orbit, there has been renewed interest in developing a lifting body vehicle as the PLS. The vehicle, the HL-20, is an LaRC Project in the Space Systems Division, involving the efforts of a number of individuals. Data on the research carried out for peer and lay review has been available in hard copy format, but a need existed for actual video footage, combined with scientific visualization technology, for presentation and archival purposes. The purpose of this project was to satisfy this need.

Beam, Sherilee F.↗
NASA NTRS1991

1991 IEEE Annual Conference on Nuclear and Space Radiation Effects, 28th, San Diego, CA, July 15-19, 1991, Proceedings

Various papers on nuclear science are presented. The general topics addressed are: basic mechanisms of radiation effects, dosimetry and energy-dependent effects, isolation technologies, device radiation response and hardening, microcircuit radiation response and hardening, single-event phenomena, hardness assurance and testing techniques, spacecraft charging, space environments and effects.

Millward, Douglas G.↗
NASA NTRS1993

Graphite fiber textile preform/copper matrix composites

This project has the objective of exploring the use of graphite fiber textile preform/copper matrix composites in spacecraft heat transmitting and radiating components. The preforms are to be fabricated by braiding of tows and when infiltrated with copper will result in a 3-D reinforced, near net shape composite with improved specific properties such as lower density and higher stiffness. It is anticipated that the use of textile technology will result in a more robust preform and consequently better final composite; it is hard to anticipate what performance tradeoffs will result, and these will be explored through testing and characterization.

Filatovs, G. J.↗
NASA NTRS1996

Advancement of X-Ray Microscopy Technology and its Application to Metal Solidification Studies

The technique of x-ray projection microscopy is being used to view, in real time, the structures and dynamics of the solid-liquid interface during solidification. By employing a hard x-ray source with sub-micron dimensions, resolutions of 2 micrometers can be obtained with magnifications of over 800 X. Specimen growth conditions need to be optimized and the best imaging technologies applied to maintain x-ray image resolution, contrast and sensitivity. It turns out that no single imaging technology offers the best solution and traditional methods like radiographic film cannot be used due to specimen motion (solidification). In addition, a special furnace design is required to permit controlled growth conditions and still offer maximum resolution and image contrast.

Kaukler, William F.↗
NASA NTRS1996

Advancement of X-Ray Microscopy Technology and Its Application to Metal Solidification Studies

The technique of x-ray projection microscopy is being used to view, in real time, the structures and dynamics of the solid-liquid interface during solidification. By employing a hard x-ray source with sub-micron dimensions, resolutions of 2 microns can be obtained with magnifications of over 800 X. Specimen growth conditions need to be optimized and the best imaging technologies applied to maintain x-ray image resolution, contrast and sensitivity. It turns out that no single imaging technology offers the best solution and traditional methods like radiographic film cannot be used due to specimen motion (solidification). In addition, a special furnace design is required to permit controlled growth conditions and still offer maximum resolution and image contrast.

Kaukler, William F.↗
NASA NTRS1982

Electron lithography STAR design guidelines. Part 2: The design of a STAR for space applications

The STAR design system developed by NASA enables any user with a logic diagram to design a semicustom digital MOS integrated circuit. The system is comprised of a library of standard logic cells and computr programs to place, route, and display designs implemented with cells from the library. Also described is the development of a radiation-hard array designed for the STAR system. The design is based on the CMOS silicon gate technology developed by SANDIA National Laboratories. The design rules used are given as well as the model parameters developed for the basic array element. Library cells of the CMOS metal gate and CMOS silicon gate technologies were simulated using SPICE, and the results are shown and compared.

Trotter, J. D.↗
NASA NTRS2003

High Sensitivity Long-Wavelength Infrared QWIP Focal Plane Array Based Instrument for Remote Sensing of Icy Satellites

GaAs based Quantum Well Infrared Photodetector (QWIP) technology has shown remarkable success in advancing low cost, highly uniform, high-operability, large format multi-color focal plane arrays. QWIPs afford greater flexibility than the usual extrinsically doped semiconductor IR detectors. The wavelength of the peak response and cutoff can be continuously tailored over a range wide enough to enable light detection at any wavelength range between 6 and 20 micron. The spectral band-width of these detectors can be tuned from narrow (Deltalambda/lambda is approximately 10%) to wide (Deltalambda/lambda is approximately 40%) allowing various applications. Furthermore, QWIPs offer low cost per pixel and highly uniform large format focal plane arrays due to mature GaAs/AlGaAs growth and processing technologies. The other advantages of GaAs/AlGaAs based QWIPS are higher yield, lower l/f noise and radiation hardness (1.5 Mrad). In this presentation, we will discuss our recent demonstrations of 640x512 pixel narrow-band, broad-band, multi-band focal plane arrays, and the current status of the development of 1024x1024 pixel long-wavelength infrared QWIP focal plane arrays.

Gunapala, S.↗
NASA NTRS2004

Mission Trades for Aerocapture at Neptune

A detailed Neptune aerocapture systems analysis and spacecraft design study was performed to improve our understanding of the techonology requirement for such a hard mission. The primary objective was to engineer a point design based on blunt body aeroshell technology and quantitatively assess feasibility and performance. This paper reviews the launch vehicle, propulsion, and trajectory options to reach Neptune in the 2015-2020 time frame using aerocapture and all-propulsive vehicles. It establishes the range of entry conditions that would be consistent with delivering a - 1900 kg total entry vehicle maximum expected mass to Neptune including a - 790 kg orbiter maximum expected mass to the science orbit. Two Neptune probes would be also be delivered prior to the aerocapture maneuver. Results show that inertial entry velocities in the range of 28 to 30 km/s are to be expected for chemical and solar electric propulsion options with several gravity assists (combinations of Venus, Earth and Jupiter gravity assists). Trip times range from approximately 10-11 years for aerocapture orbiters to 15 years for all-propulsive vehicles. This paper shows that the use of aerocapture enables this mission given the payload to deliver around Neptune compared to an all-propulsive orbit insertion approach. However, an all-propulsive chemical insertion option is possible for lower payload masses than the one needed for this science mission. Both approaches require a Delta IV heavy class launch vehicle.

aerocapture↗
NASA NTRSDate not supplied

Space Radiation Effects on SiC Power Device Reliability

Heavy-ion radiation can result in silicon carbide power device degradation and/or catastrophic failure. Test procedures and data interpretation must consider the impact that heavy-ion induced off-state leakage current increases will have on subsequent single-event effect susceptibility and testability. On orbit, reliable performance in the presence of increased off-state leakage currents due to cumulative ion-induced non-catastrophic single-event effects must be assured over the mission lifetime. This work presents a large body of heavy-ion test data for different diode, power MOSFET, and JFET devices. Susceptibility to single-event effects is compared between SiC and Si power devices. Initial recommendations on heavy-ion radiation test methods for silicon carbide power devices are made and radiation hardness assurance is discussed with the goal of moving one step closer to reliably getting this technology off the ground into a broad array of spacecraft and instruments that will benefit from its unique capabilities.

diode↗